Preizkusna komora za udarni test –80 °C do +220 °C

Vötsch VT 7012 S2

Leto izdelave: 2000, obratovalne ure: 104.382 h, Stanje: zelo dobro (rabljeno), Vötsch Shock Test Chamber VT 7012 S2 System for Extreme Temperature Changes The temperature shock test assesses the resilience of components, devices, and other products against rapid ambient temperature fluctuations. Test specimens are subjected to swift changes in air temperature, with varying upper and lower temperature loads. Through these cyclic loads and the accelerated aging caused by temperature variation, material weaknesses can be detected. Key Features: - Vertical chamber configuration - Ball screw drive for secure guidance of the carrier basket - Basket load capacity: 50 kg (VT3 7012 S2) - All-round mesh in the basket secures the test specimens - High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber - Hot chamber can be used as a temperature storage unit, cold chamber for temperature variation testing - Minimal energy consumption - No compressed air required Manufacturer: Vötsch Model: VT 7012 S2 Type: Temperature Shock Test Chamber Test Chamber Volume: 120 l Nominal Voltage: 400 V Nominal Power: 10 kW Nominal Current: 25 A Refrigerant: R452A Cooling Unit: water-cooled Shock cooling (liquid nitrogen cooling) via customer-provided nitrogen supply External Dimensions Width: 930 mm Fjdpfx Aox Exmtoa Hegk Depth: 2115 mm Height: 1970 mm Test Chamber Dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection Class Device: IP 42 Control Panel: IP 20 Control Cabinet: IP 54 Characteristic Values for Temperature Testing in Single-Chamber Operation Temperature Range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature Deviation Over Time: ±2 K (steady state) Temperature Deviation Spatial: ±2 K (steady state, in basket) Heating Rate Hot Chamber: 11 K/min Cooling Rate Cold Chamber: K/min Heating Rate Cold Chamber: 2 K/min Cooling Rate Hot Chamber: K/min Inspection window: 355 x 355 mm Cable port: 67 mm Year of Manufacture: 2000 Operating Hours: 104,382 Weight: 1,000 kg More items – new and used – available in our shop! International shipping costs on request!

Stanje: zelo dobro (rabljeno), Vötsch Model: VT 7012 S2 Shock Test Chamber, Air-Cooled Two-Chamber Design Fgedpjwxc I Usfx Aa Hsk Hot Chamber: The temperature range of the hot chamber is from +50°C to +220°C Temporal temperature deviation at center of usable space: ± 1 K Spatial temperature deviation: ± 2 K Rate of temperature change (heating): 11 K/min Cold Chamber: The temperature range of the cold chamber is from -80°C to +70°C Temporal temperature deviation at center of usable space: ± 1 K Spatial temperature deviation: ± 2 K Rate of temperature change: Heating: 2 K/min Cooling: 3 K/min Test Chamber Volume: 125 liters Temperature Range Hot Chamber: +50°C to +220°C Temperature Range Cold Chamber: -80°C to +70°C Internal Dimensions (W x D x H): 470mm x 650mm x 410mm External Dimensions (W x D x H): 930mm x 2115mm x 1970+mm Port Diameter: ∅ 67mm Power Supply: 3/N/PE AC 400V +10% 50Hz Rated Power: 10 kW Rated Current: 25 A Refrigerant: R452-A / R23 Weight: 1000 kg For your security as a buyer, please note the following information: The following procedures are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. New refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See photo) (Specifications and technical data subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Vötsch shock test chamber. Temperature shock test chamber, water-cooled Two-chamber design Hot chamber: Temperature range for the hot chamber: +50°C to +220°C Fgedjigg Hnepfx Aa Hsk Temporal temperature deviation at center of usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 11 K/min Cold chamber: Temperature range for the cold chamber: -80°C to +70°C Temporal temperature deviation at center of usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions (W x D x H): 470mm x 650mm x 410mm External dimensions (W x D x H): 930mm x 2115mm x 1970+mm Port diameter: 67mm Nominal power: 10 kW Nominal current: 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information: The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New refill with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Type: VT 7012 S2 Condition: used Scope of delivery: (see picture) (Technical data and specifications subject to change and error!) If you have further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Vötsch shock test chamber. Water-cooled thermal shock test cabinet Two-chamber design Hot chamber: The temperature range of the hot chamber is from +50°C to +220°C Temporal temperature deviation at the center of the usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate Heating: 11 K/min Cold chamber: The temperature range of the cold chamber is from -80°C to +70°C Temporal temperature deviation at the center of the usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber internal dimensions: width 470 mm x depth 650 mm x height 410 mm External dimensions: width 930 mm x depth 2115 mm x height 1970 mm Port diameter: 67 mm Rated power: 10 kW Fodpfx Aaon Arc Ae Hjgk Rated current: 25 A Voltage: 3/N/PE AC 400V ±10% 50Hz Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information! We perform the following steps in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Model: VT 7012 S2 Condition: used Scope of delivery: (See image) (Changes and errors in technical data and specifications excepted!) If you have further questions, we are happy to answer them by phone.