Klimatska preizkusna komora 350 litrov z vlažnostjo

CTS C -40/350 -40°C /+180°C

Stanje: zelo dobro (rabljeno), CTS Type: C-40/350 Ex/l Water-cooled Climate Test Chamber ATEX Zone 1 The Ex/l designation indicates that this climate test chamber is suitable for use in potentially explosive areas classified as Zone 1. This means it is intended for environments where explosive atmospheres may occur. Such devices are specially designed and tested to ensure safety in these locations. Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 3.5 K/min Isdpfx Aeygui Sedkeap Cooling: 4 K/min Heat compensation: approx. 3500 W at +20°C approx. 2000 W at -20°C Climate Testing: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Humidity deviation: ≤ +3.0% RH over time The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimens, without heat compensation and without additional equipment. Options may affect performance data. Technical Specification: Cooling unit: water-cooled, low-noise, fully hermetic, continuously variable power adjustment by electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: floor load 150 kg/m² Insert shelf: stainless steel, support area 620 x 600 mm Load per shelf max. 35 kg Total load with max. shelf fitting: 100 kg Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Plain text error messages Interface RS 232 Ethernet interface Free switching channels for customer test item control Dimensions: Test volume: 350 liters Internal dimensions: height 750 mm × width 650 mm × depth 715 mm External dimensions: height 1900 mm × width 1000 mm × depth 2300 mm Operating data: Power connection: 400V +6/-10 %, 3/N, 50 Hz Rated power: 7.15 kW Rated current: 14.3 A Protection class: IP 54 Sound pressure level

Stanje: rabljeno, Leto izdelave: 2001, Število tiskarskih enot: 8 Širina traku: 1.270 mm Tiskovna širina: 1.200 mm Iedpsx E Tm Usfx Adkjap Obseg ponavljanja tiska: 300–1.000 mm Tip odvijalca: dvojna os, avtomatski spoj Tip navijalca: stolpni, popolnoma avtomatski spoj Sušenje: vroč zrak – električni grelci Video kamera: BST Euroscope Vodila traku: Da Material: plastične folije Število camber doctor rezil: Da Črpalke za barvo: 8 Tip črnila: na osnovi topila Prenos: glavno kolo (bull gear) Dolžinski/bočni register: motoriziran, daljinsko voden

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, Product Features: rectangular and dimensionally stable, labelling capacity: 30 products/min, pneumatic connection: 6 bar, printing method: thermal transfer, product weight range: 15g–1000g, machine weight: approx. 600kg. Top label length range: 15mm–160mm, top label width range: 30mm–300mm. Bottom label length range: 15mm–120mm, bottom label width range: 30mm–300mm. Product dimensions X/Y/Z top: 30mm–300mm/50mm–250mm/50mm–150mm. Product dimensions X/Y/Z bottom: 140mm–300mm/50mm–250mm/50mm–200mm. Product dimensions X/Y/Z top & bottom: 140mm–300mm/50mm–250mm/50mm–150mm. Includes a two-metre long and 150mm wide conveyor belt and a 180° Dorner conveyor. Documentation available. On-site inspection possible. Iedpfjvcc S Asx Adkeap

Leto izdelave: 2024, stanje: novo,

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Printing technology: Piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1x UV GOZ and 1x UV FOZ Höhnle with 7.2kW, pinning system (LED) after printing unit 1+5, extraction: included in the dryer unit for cooling the UV lamps and for minimizing odors and improving sensor characteristics, inert gas system: oxygen-reduced curing unit (Inert Gas System), consumption: less than 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min/max. of printable section length 10-1000mm, print tolerance: single gap +/-0.2mm, cumulative gap: +/-1.5mm (over one meter), register accuracy: +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed selectable from 18 to 48m/min, print pretreatment: corona treatment with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for 76mm core sleeves for unwind and rewind, pneumatic locking of air shaft, lock can be released to rotate the shaft, max. reel diameter for unwind and rewind: 610mm, max. reel weight for unwind and rewind: 120kg. Power consumption: approx. 39kVA / 60A, air consumption: 100 NL/min, cooling capacity: approx. 60,000 BTU/h = 18kW, data interface: USB 2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. Complete with documentation, chiller and inks. The machine is fully operational, complete and ready for use, has been regularly serviced. On-site inspection is possible. Isdpfx Ajxz Ewnsdkeap

Stanje: generalkompletno obnovljen (rabljeno), Used, modernized 3D CNC Coordinate Measuring Machine. ZEISS Prismo 16 – Pre-owned system, configuration selectable on request Measuring machine with moving bridge design Table plate made of granite Iaedpfjwptpkex Adkep Equipment can be customized to your individual requirements. Further details available upon request. Measuring range: X = 1600 mm – Y = 3000 mm – Z = 1000 mm Measurement uncertainty: depends on the selected measuring system Price: on request – please let us know your desired configuration >>> Single unit – available while stocks last

Stanje: rabljeno, Technical Details: Welding Current: 500 A Machine Weight approx.: 129 kg Dimensions (L x W x H): 1.1 x 0.7 x 1.2 m Control: Display for welding current with 2/4-step switch, pulse function, stepless adjustment Cooling system: water-cooled with antifreeze Shielding gas: solenoid valve (without pressure regulator) Torch package with 3.0 m length Torch head: gas-cooled Ground clamp with 2.5 m ground cable Wire feed: 4-roll drive for wire Ø 1.0/1.2mm Iedjwtctmjpfx Adkoap

Stanje: rabljeno, Leto izdelave: 2014, Overview This complete brewery equipment mainly dates from 2014 and is becoming available due to the closure of the business. The equipment is already dismantled and properly stored. Scope of supply - Water softener - Compressor | Josval Sauber 240 D - Mill | Robix ROPPI 250 - Thermindus Boiler Ps (Barg 6), PL (Barg 10.4), Ts max 165°C, Ts min 10°C, 34 kW - Portable pump 2.20 kW INOX - Hoses, cones, keys - Manual isobaric filling machine with 4 filling heads Iasdjtka Aqjpfx Adkop - Automatic labelling machine | Arca L10-8128 - 2x Rotary table with controller, 100 cm diameter, for bottle or can infeed and outfeed - Videojet 1220 batch coder - Infrico undercounter refrigerator with 3 doors - Brewhouse | Spadoni | MBS 600 VAP | 2014 - Spadoni 600, Mash tun 680 litres, false bottom, rotating blades, transfer and recirculation pump - 720 litre boiler with whirlpool, with boiler pump and Spadoni plate cooler - Hot water tank | Spadoni | 10hl - Cold water tank | Spadoni | 10hl - Mixing tanks | Spadoni | 1.5hl with tangential inlets - Mixing tanks | 1.5hl with tangential inlets - 2x Isobaric fermenters | Spadoni | 2.5 bar, 15hl - 2x Isobaric fermentation vessels | Spadoni | 2.5 bar, 30hl - 2x Atmospheric fermentation vessels, 1 bar pressure, 1.2hl | BREW TECH - Atmospheric fermentation vessel, 1 bar pressure, 1.2hl (jacketed) | BREW TECH

Stanje: rabljeno, Leto izdelave: 2004, Overview The filler was manufactured in 2004 and was used in recent years at a brewery in France. The entire brewery was sold to a company in Belgium. The filler is no longer needed and is therefore being offered for sale. It is suitable for filling beer and soft drinks. The machine has been dismantled and is properly stored. Technical Data: - Output: 2,500 bottles/hour (0.75 l per bottle) Iasdpfxol Hxl Ij Adkep - 3,300 bottles/hour (0.33 l per bottle) - 20 rinsing stations - 20 filling valves - 3 capping elements - Bottle formats: 0.33 l; 0.75 l - Working direction: left to right

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Multifunkcijski varilni stroj (MIG, TIG, elektrode) Znamka: Kemppi Iaedpfx Asxf Hv Hsdkep Model: Pro 3000 / Promig 500 Stroj s hlajenjem z vodo in hladilnikom Kemppi PRO Cool 10. Enota za TIG/elektro varjenje Kemppi PRO TIG 410 - Panel Kemppi TL - Funkcije za TIG varjenje: predplin, poplin, oblok, visoka frekvenca TIG generator Kemppi Pro 3000 Enota za MIG/žično varjenje Kemppi PRO MIG 500 - Delovni cikel: 500A – 60% - Kontrolna plošča Kemppi ML SYNERGIC - 4 pogonski valji - Impulzni obločni tok s Synergic panelom - Posebne funkcije za varjenje jekla, nerjavnega jekla in aluminija Vključuje: - TIG varilna pištola - MIG varilna pištola - Masa - Regulator za plin