Wolpertov testor HT 1E za merjenje trdote

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 31 h, 3D Coordinate CNC Measuring Device Profitech Innometrik Advanced in Gantry Design (Demo Unit at Special Price) Open Cable Key Features of Gantry Design: Gantry construction with a low center of gravity, wide bearing separation, and optimal stiffness-to-mass ratio. Granite guideways ensure consistent thermal, dimensional, torsional, and geometrical stability of the machine. 24 air bearings for smooth movement of all three axes. High dynamics for improved performance—the machine can reach high accelerations, comparable to medium and large CMMs. Thermally stable materials and components minimize the impact of ambient temperature fluctuations on measuring results. Air filters and regulators included. Pneumatic counterbalance system for the Z-axis. Granite table with M10 threaded inserts. Passive vibration isolation pads. Technical Specifications Measuring range: X: 500 mm Y: 600 mm Z: 400 mm Max. workpiece weight: 250 kg Machine weight: 850 kg Overall dimensions: 1290 x 1160 x 2350 mm Accuracy according to DIN EN ISO 10360-2 / ISO 10360-4: Volumetric probing deviation: MPEP = 2.2 µm Volumetric length measuring deviation: MPEE = 2.2 + L / 350 (µm) Ambient Conditions: Standard room temperature: 18–22°C Operating temperature: 10–35°C Gcedpfx Aedyah Seb Tea Compressed air supply: Minimum air pressure: 6 bar Air consumption: 90 NI/min Available as a complete package with probe system, software, commissioning, and training. (Annual maintenance & calibration also available)

Stanje: dober (rabljeno), Forged vice, bench vice, anvil vice, anvil, blacksmith’s anvil, machine vice, engineer’s vice, parallel vice Gcjdpedl E Irofx Ab Tsa -Jaw width: 135 mm -Clamping width: 150 mm -Quantity: 9 vices available -Price: per piece -Dimensions: 450/160/H900 mm -Weight: 35 kg

Stanje: rabljeno, Leto izdelave: 2015, Technical Details: X-axis travel: 960 mm Y-axis travel: 600 mm Z-axis travel: 480 mm Rotary table: D 350 mm Table load capacity: 200 kg Spindle speeds: 12,000 rpm Spindle motor power: 14/10 kW Control system: HEIDENHAIN iTNC 530 Rapid traverse: 32 / 32 / 24 m/min Tool changer: 30 positions Spindle taper: ISO BT 40 Machine weight approx.: 7.4 t Total power requirement: 45 kVA Godpfxsrm Txbs Ab Tsca Space requirement approx.: 3.1 x 2.3 x 3.1 m 5-axis simultaneous universal machining center, NC rotary-swivel table D 350mm, A-axis (120/-42°), C-axis 360°, Through-spindle coolant (IKZ), Electronic handwheel, Chip conveyor, Direct measuring system, Operating hours: approx. 9,000 power-on hours, approx. 3,500 spindle hours

Leto izdelave: 2023, Stanje: novo, - modern ergonomic design - manual testing sequence with analog dial gauge (reading accuracy 0.2 HR units) - easy operation and fast testing procedure - test chamber height approx. 185 mm - test chamber depth approx. 160 mm - dimensions 545x182x755 mm Test load ranges: 60 / 100 / 150 kg Test methods: HRA/HRB/HRC Standard scope of delivery: - hardness tester - prism support - flat test table Ø150 mm - flat test table Ø50 mm Gjdpfx Aepbbc Hjb Toca - 1/16" ball holder with ball - 120° Rockwell diamond indenter - spindle guard - accessory case

Stanje: rabljeno, Leto izdelave: 2008, Article: Vertical Turning and Grinding Center Brand: EMAG Model: VSC 250 DS Gcjdpfx Abeia Rtde Tsa Year of Manufacture: 2008 Control: SIEMENS 840D Grinding Spindle Speed: 30,000 rpm Turning Spindle Speed: 3,000 rpm Turret Tool Stations: 12 Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling system Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled by a spindle repair shop. Otherwise, the machine is in very good condition and fully operational. Please contact us for further information and pictures via mail(at) or

Stanje: novo, Leto izdelave: 2025, The EVP-RA 550 vibratory finishing machine from ERBA features an inclined process channel bottom with integrated separation. It is equipped with an easily exchangeable screening unit and delivers high operational efficiency thanks to its integrated drop step. Unloading and separation are performed via the built-in flap (manual/pneumatic). Upon request, a reinforced suspension and a high-powered motor can be installed for increased workloads. Motor speed can be continuously adjusted using a frequency inverter (optional). The EVP-RA 550 can be linked with other machines thanks to its lateral discharge system. The system can also be equipped with a fully automatic PLC control (optional). ERBA vibratory finishing systems are known for their reliability and longevity, which are based, among other things, on the hot-cast polyurethane lining of the process channel. Technical data: - Gross volume: 550 liters - Working channel width: 390 mm - Unbalance motor output: 4.0 kW - Speed: 1,400 rpm - Internal diameter of process channel: 1,400 mm All prices are net plus the currently applicable statutory VAT and freight costs. Please note: machines in pictures may include accessories that are optionally available and incur additional charges. If you are interested, we look forward to hearing from you. Our consultation is free of obligation and charge. Godpsn Ut Uvofx Ab Tjca The European Commission offers an online platform for out-of-court dispute resolution (OS platform). This listing serves solely for online presentation of our goods. Contract negotiations are conducted via telecommunication (e-mail, phone, message portal). In the first step, we provide you with a non-binding offer, which also contains our general terms and conditions with imprint as well as information on your right of withdrawal, before any purchase or contract is concluded.

Stanje: delavnici obnovljeno (rabljeno), potovalna razdalja osi X: 310 mm, pomik osi Y: 294 mm, pomik po osi Z: 210 mm, skupna masa: 3.000 kg, največja hitrost vretena: 50.000 obr/min, Used HSC machine RXP400DS/ RXD5 -Refurbished- The machine is fully refurbished, tested, and measured in our facility. The machine then meets the tolerances of a new machine! Working area: - X-axis: 200 mm - Y-axis: 294 mm - Z-axis: 200 mm - Drives of linear axes: Linear motors on all axes. - Drives of rotary axes: High-dynamic direct drives with integrated cooling. - Feed rates 0 - 40,000 mm/min on all linear axes. - Network connection: - Tool measurement laser: Diameter and contour measurement, wear monitoring and breakage control for the milling tools. - Chuck control, 1st chuck - Emulsion cooling with mechanical oil mist extraction - RMS Main Job Manager - Spindle max. 60,000 rpm HSK 25 - 12-position linear tool changer; optional conversion to chain magazine - Option: high precision - Remote maintenance via Teamviewer Gcjdjlzhhcepfx Ab Tsa - Transport dimensions of the machine: W 2,425 x L 1,925 x H 2,140 mm - Weight: approx. 3,000 kg A demonstration of the machine in ready-to-operate condition is possible at any time. You are also welcome to find more information about our refurbished machines on our website or on our Hüttmann YouTube channel.

Stanje: novo, Leto izdelave: 2024, Hacker knives Gedpjbxu Dhofx Ab Tjca 40 x 40 concave Blades for Weima, Gross, etc. For almost all common chippers/shredders Available from stock in Bitburg Subject to prior sale

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Kabina za lepljenje in peskanje HGH 6040 DUO Dve peskalni enoti v enem ohišju z zložljivim sprednjim delom in loputo, ki se odpira za 90° Delovni prostor 560 x 350 x 250 mm Dimenzije vrat [mm]: 600 x 230 Dimenzije kabine [mm]: 1300 x 720 x 1500 Gedpfx Abjrhidxe Teca Največja teža obdelovanca [kg]: 100

Stanje: novo, Leto izdelave: 2025, The EVP-RA 350 vibratory finishing machine by ERBA features an inclined process channel bottom with integrated separation. The machine is equipped with an easily replaceable screening unit and is distinguished by high operational efficiency thanks to an integrated drop zone. Unloading and separation are carried out via the integrated discharge flap (manual/pneumatic). Upon request, the machine can be fitted with a reinforced spring assembly and a more powerful motor for higher loads. The motor speed can be infinitely adjusted with a frequency converter (optional). Thanks to its side discharge outlet, the EVP-RA 350 can be linked with other machines. The system can be optionally equipped with a fully automatic PLC control. ERBA vibratory finishing systems are renowned for their durability and longevity, owed in part to the hot-cast polyurethane lining of the process channel. Technical specifications: - Gross volume: 385 liters - Channel width: 340 mm - Imbalance motor output: 2.2 kW - Speed: 1,400 rpm - Internal diameter of process channel: 1,200 mm Gsdpfxjn Ut Urs Ab Toca All prices are net, plus the applicable statutory VAT and shipping costs. The images may show the machine with accessories, which are optionally available at additional cost. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). The offer is intended solely as an online presentation of our goods. Contract negotiations take place via telecommunications (email, telephone, messaging portal). In the first instance, we will provide you with a non-binding offer, which includes our general terms and conditions with legal notice and information on the right of withdrawal before any purchase/contract conclusion.