Zwick nakup rabljenega (24)

Stanje: rabljeno, Leto izdelave: 1981, Proizvajalec: ZWICK ROELL, Tip: 1484, Leto izdelave: 1981, Natezna sila 250 kN, Delovni hod 1.400 mm, Optika za beleženje deformacij (iz leta 2007), Enota za vrednotenje, Preša za vzorce ZWICK RZ 65, Brusilni stroj za vzorce 7120 (v zaprtem skladišču) Cjdox R Ec Sopfx Aa Sjgn +++ Pozor: stroj je del spletne dražbe! +++

Stanje: zelo dobro (rabljeno), Zwick/Roell Zwick/Roell ProLine 10 kN Universal Testing Machine – testXpert II V3.61 Description: For sale is an electromechanical universal testing machine Zwick/Roell ProLine with a nominal force of 10 kN, equipped with a Zwick/Roell Xforce-P load cell and the material testing software testXpert II, version 3.61. This system is suitable for standardized and customized materials testing in quality assurance, research, development, and production. Thanks to its modular construction, various test methods and fixtures can be used. Software – Zwick/Roell testXpert II V3.61 The machine is controlled via the professional test software testXpert II V3.61. This software is the industry standard in materials testing and enables: - Creation, management, and execution of test specifications - Force, displacement, and time measurement in real time - Automatic test sequence control - Graphical representation of test curves - Standard-compliant evaluation and test reports - Export of measurement results (e.g. PDF, CSV – depending on configuration) The system contains several test specifications (e.g. tensile, compression, and calibration procedures), as can be seen in the software screenshots. Possible test methods With the included equipment, the following tests can be performed, among others: - Tensile test (e.g. plastics, metals, composites) - Compression test - Bending test - Determination of Fmax / breaking force - Force and displacement monitoring - Calibration and adjustment procedures for load cells (Test procedures depend on the clamping tools and fixtures used) Technical data Manufacturer: Zwick/Roell Model: ProLine Nominal force: 10 kN Load cell: Zwick/Roell Xforce P Sensitivity: 2 mV/V Electrical data: Power supply: 230 V Frequency: 50 / 60 Hz Current consumption: 3.5 A Connection: 1L / PE / N Dimensions & weight (approx.) Height: approx. 1,900 mm Width: approx. 800 mm Depth: approx. 700 mm Cgodpjyc R R Dofx Aa Ssn Weight: approx. 200 kg Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: - Zwick/Roell ProLine 10 kN testing machine - Xforce-P load cell (10 kN) - Control unit - PC with testXpert II V3.61 - Fixtures / tools as shown in the pictures (Technical data subject to change and errors excepted!) We are happy to answer further questions for you by phone.

Stanje: zelo dobro (rabljeno), Zwick / Roell Model: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Universal Testing Machine 20 kN Tensile & Compression Testing testXpert III Available for sale is a high-quality Zwick / Roell universal testing machine for professional tensile and compression testing of materials and components. This machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. The unit is controlled via PC with Zwick/Roell testXpert III software (data carrier & documentation included). Technical data: Rated test force: 20 kN Test directions: Tension & Compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (from documents & nameplate): Mechanics / Testing Rated force: 20 kN Test directions: Tension & Compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight Total height: approx. 1,545–2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Cgsdpsx Up Igofx Aa Sjn Working width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical equipment Electrical data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Line frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & control electronics Internal data acquisition: 500 Hz Data transfer to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics enclosure protection: IP32 Important note: "The table shown in the photos is not included in the sale." Status: used Scope of delivery: (see photo) - Zwick / Roell Universal Testing Machine (20 kN) - Electronic unit - PC workstation (monitor, PC - see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Subject to changes and errors in the technical data; information is subject to confirmation!) Further questions can be answered by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a Zwick / Roell tensile testing machine (table-top testing machine). Cgodpfx Aod Sr S Iea Ssn Zwick / Roell Materials Testing Machine Model: BDO-FB0.5TH - Load testing in tension/compression direction: 500 N - Height: 1565 mm, Width: 292 mm, Depth: 469 mm - Width of test area: unlimited - Test area depth: 100 mm - Max working stroke without accessories: 1266 mm - PC or printer interface: RS 232 - Required PC connection (for PC operation): COM 1 - Power specifications: 115/230 V (PH, N, PE) - Rated power: 0.4 kVA - Mains frequency: 50/60 Hz - Weight: 47 kg - Type: BDO-FB0.5TH - Condition: used - Scope of delivery: (see pictures) (Subject to change and error in technical data and specifications!) If you have any further questions, we are happy to answer them by phone.

Stanje: rabljeno, Zwick / Roell Type: LTM10 Maximum test frequency: 100 Hz, depending on amplitude Dynamic test force in tension/compression: 10 kN Codpfx Aajv Ifgtj Sogn Static test force in tension/compression: 7 kN Piston stroke: 60 mm Positioning and repeat accuracy: +/- 2 µm Speed range: 1 mm/min - 1 m/s Test space height without load cell: 1170 mm Weight with linear motor: 1065 kg (without control unit) Maintenance: As per maintenance guidelines, partly by Zwick/Roell Accessories: Screw grips, software (TestXpert research) Connection: 400V 50/60 Hz 32A 3Ph/PE Condition: used Scope of delivery: (See picture) (Specifications are subject to change and errors excepted!) We are happy to answer any further questions by phone.

Stanje: zelo dobro (rabljeno), Zwick Type: BZ2.5/TN1S Zwick Tabletop Testing Machine for Tensile Strength Measurement Application Area: Versatile range of uses, from testing plastics and elastomers to paper, textiles, foam, wire, and component testing. Load Frame: Maximum test force FN in tensile/compression direction: 2.5 kN Height (h1): approx. 770 mm Width with electronics unit: 320 mm Depth with electronics unit: 414 mm Working area height h min ... h max: Cjdpfefnm Dqjx Aa Ssgn Crosshead angle mounted upwards: 227 ... 573 mm Crosshead angle mounted rotated by 180°: 57 ... 403 mm (each without connecting bolts) Connection values: Electrical connection: 115/230 V 4/2A-1PH/PE/N Power consumption: 0.4 kVA Mains frequency: 50/60 Hz Capacity: 2.5 kN Condition: used Scope of delivery: (See picture) (Specifications and details subject to change and errors!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Zwick Type: BT1-FR050TH.A1K 50 kN Universal Testing Machine Zwick/Roell BT1-FR050TH.A1K Materials Testing Machine – Precise Strain Gauge Measurements Note: No PC included!! Highlights: - Test force: 50 kN (tension / compression) - High-precision TC-MODCSCC module for strain gauge load cells (4- & 6-wire) - Measuring range: 0.2 – 165% of nominal value, data acquisition up to 500 Hz - Maximum resolution: up to 297,000 points (at 50 Hz) - Positioning repeatability: ±10 µm - Crosshead speed: 0.0005 – 600 mm/min - Robust construction - Compact dimensions: 1,814–2,688 mm height, 936 mm width, 722 mm depth - Low noise: 59 dB(A), ambient temperature +10 to +35 °C, humidity 20–90% Special features: Ideal for research, development, or industrial material testing Dimensions & Weight: Load frame: Cgodpfxsw S Hvzs Aa Sen Test force (tension/compression): 50 kN Load frame height: 1,714 mm Overall height: 1,814 – 2,688 mm Load frame width: 760 mm Total width: 936 mm Load frame depth: 477 mm Total depth: 722 mm Weight: With electronics unit: 230 kg With typical accessories: approx. 300 kg Condition: used Scope of delivery: (see pictures) ZwickRoell BT1-FR050TH.A1K testing machine Operating manual (Specifications subject to change and errors excepted!) If you have further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Zwick / Roell Zwick Indentec Hardness Tester Model: 4150DLC-A Technical specifications: Available test forces: 60, 100, and 150 kgf Cjdpfx Aaovxrxdo Sjgn Power supply: 115 / 230 V (50 - 60 Hz) 2/1A 1L/N/PE + EO-4010C camera and ueye software Condition: used Weight: approx. 60kg Scope of delivery: (see picture) (Subject to modifications and errors in the technical data. All information is provided without guarantee!) If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Zwick / Roell Zwick / Roell Type HIT5.5P – Pendulum Impact Testing Machine Cjdjwqfnujpfx Aa Sogn For sale is a high-quality, used pendulum impact testing machine, model HIT5.5P, from the manufacturer Zwick / Roell. This device is ideally suited for instrumented impact testing in accordance with Charpy and Izod standards on plastics, metals, or composite materials. Device Data: Device = HIT5.5P Version = V2.8 HIT Pendulum = 5 J Charpy Current Pendulum Energy = 5.000 J Friction = 0.017 J Friction Compensation = Empty swing Impact Velocity = 2.9 m/s Pendulum Mass = 1.19 kg Release Angle = 107.46 ° Pendulum Length = 330.0 mm Technical Specifications: Model: Zwick / Roell HIT5.5P Max. Impact Energy: 5.5 Joules Test Methods: Charpy, Izod (instrumented) Data Acquisition: Force-time and displacement-time curves Power Supply: 230 V / 50 Hz Scope of Delivery: - Zwick Roell HIT5.5P including 5.5 J pendulum - Control unit with operator panel - Power and connection cables Shipping via freight carrier (pallet shipment) – costs on request Collection by arrangement in Borken possible. Condition: used (Technical data subject to change and error!) If you have further questions, we will be happy to answer them by phone.

Stanje: dober (rabljeno), Zwick Type: BZ1.0 / TH1S Zwick Tabletop Testing Machines Zwick with a maximum force of 1.0 kN. Cedpfx Aaoddants Sogn Traverse path: 1150 mm. Test speed: 0.1 ... 1800 mm/min Scope of delivery: (see pictures) (Subject to change and errors in the technical data and information!) For further questions, we are happy to assist you by phone.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2018, Zwick / Roell Type: EC76G 1-1-2-0 361763 Description: Zwick / SFL Severn Furnaces Limited Zwick/Roell temperature chambers for tests in the temperature range of -80°C to +250°C Reproducible test results and perfect integration of the temperature chamber into the testing system. Temperature chambers: Width 600 mm x Height 1000 mm Temperature chamber for the AllroundLine Cooling via LN2 (liquid nitrogen) Csdpfxelguwwe Aa Ssgn (-80°C connection external, not included) Mains voltage: 400/230 V, 16A, 3N~ 50/60Hz Power: 4500W Weight: 180 kg Condition: unused Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Stanje: rabljeno, Zwick/Roell Universal Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Force Transducer TC-LC100KN.G02 (100 kN) Software testXpert III 1.6 serves as the control and evaluation software for ZwickRoell material testing machines. It enables standards-compliant test procedures, logs measured data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell's testing software (especially testXpert III) supports current Windows platforms, ensuring compatibility and intended use with Windows 11. Item Description: For sale is a high-quality material testing system, consisting of: - Zwick/Roell Universal Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Force Transducer TC-LC100KN.G02 (100 kN) The system comes from a laboratory environment and was used for mechanical material testing at ambient and high temperatures. All devices are pre-owned, well-maintained, and fully functional. Cjdpfx Asxt Hn Ssa Segn Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Max. Test Force: 100 kN AC Drive 4 kW, widened base version (W) Power supply: 400 V / 50–60 Hz / 3Ph+N+PE, current draw 9 A Test area: height 1,765 mm, width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Nominal test force (Fnom): 100 kN Drive: AC drive 4 kW (widened base version, W) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) per ISO 7500/1 Supply voltage: 400 V / 50–60 Hz / 3Ph+N+PE Current draw: 9 A Power consumption: 5.0 kVA Load frame height: approx. 2.32 m Test space height: 1,765 mm Test space width: 1,030 mm Machine weight: approx. 1,820 kg Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Force Transducer: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Max. temperature: 1200°C 2 separately controllable heating zones Output: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Force Transducer TC-LC100KN.G02 Nominal force: 100 kN Protection class: IP67 Precise force measurement according to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photo) - Zwick/Roell Universal Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Force Transducer TC-LC100KN.G02 (100 kN) - Connection cables and mounting materials (if available) (Subject to modifications and errors in technical specifications and descriptions!) For further questions, we are happy to assist you by phone.

Leto izdelave: 2021, Stanje: zelo dobro (rabljeno), Zwick / Roell Model: Mflow Application Area: With increasing testing demand, the need for higher automation levels (compared to the Cflow) also rises. The Mflow is a modularly expandable device that allows you to determine the melt mass-flow rate (MFR) and melt volume-flow rate (MVR). In its basic version, the Mflow melt flow tester is designed for MFR tests according to Method A and can be upgraded for MVR tests according to Method B. Testing according to the following standards is possible: Methods A and B according to ISO 1133 Methods A, B, and C according to ASTM D 1238 ASTM D 3364 JIS K 7210 Optionally, the Mflow can be expanded with features such as pneumatic weight lifting (with or without cleaning function) or weight removal. The Mflow can be operated stand-alone via a modern touch display, or with ZwickRoell testing software on a PC. Technical Data: Test load: 0.325 – 21.6 kg (depending on additional weights used) Compressed air (only required for optional pneumatic weight lifting): 6 – 10 bar, oiled, dry Test temperature: +50 °C – +450 °C Display: capacitive touch display Temperature display resolution: < 0.1 K Cgodpfstq Em Tsx Aa Sjn Temperature accuracy: < 0.3 K Number of storable parameter sets: > 100 Dimensions: Height: 510 mm Width: 360 mm Depth: 419 mm Weight: approx. 43 kg Time measurement: Error margin Method A: ± 0.02 s Error margin Method B: ± 0.01 s Displacement measurement (Method B): Error margin: ± 0.02 mm (ISO 1133) Resolution: < 0.005 mm PC connectivity: Multi-device operation possible (up to 6 devices per PC) Mains connection: 220 – 240 V / 50–60 Hz Power consumption: 2.6 A Software version: V4.2 Year of manufacture: 2021 Condition: used Scope of delivery: (see image) (Subject to changes and errors in the technical data, all information is subject to confirmation!)

Stanje: zelo dobro (rabljeno), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a high-quality material testing machine, the Zwick/Roell Z010 TN ProLine (BT1FB010TN.D30), with comprehensive configuration. This system is ideal for performing tensile, compression, flexural, and component tests. It is offered complete with original Zwick software, accessories, and a protective screen. Complete system Including protective screen (CE-compliant, with electric interlock) Extensive accessories and software included Technical data of the testing machine: Model: Z010 TN ProLine, nominal force 10 kN Test area (W x H): 440 x 1050 mm Cgjdew Uifdepfx Aa Ssn Test speed: 0.001 – 1000 mm/min, continuous up to nominal force High-precision guide, very low noise emission High-resolution, maintenance-free DC motor Electrical connection adjustable in 6 voltage ranges Including interface card for force transducers (additional slot for expansions available) Expandable with options and modules Safety – Protective screen (included in delivery): Suitable for ProLine Z005TN, Z010TN, Z020TN With electric locking and additional manual interlock Makrolon pane 6 mm thick, pivotable (hinged left) CE-compliant Mandatory for applications with risk of operator injury Force transducer: Xforce HP force transducer, nominal force 10 kN Accuracy class: 1 from 20 N, 0.5 from 100 N (according to ISO 7500-1) Extremely good linearity (

Stanje: rabljeno, Zwick Tip: Z30 Tehnični podatki: Skupna višina: 2114 mm, širina: 748 mm, globina: 580 mm Fmax: 30 kN Vmax: 125 mm/s Pribor: Ekstenzometer ClipOn 13,5 mm Ekstenzometer ClipOn 40 mm Cedpfx Asx Az Skoa Sogn Računalnik + programska oprema testXpert II V3.5 Skupna teža cca 500 kg Stanje: rabljeno Obseg dobave: (glej sliko) (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih!) Za dodatna vprašanja nas lahko pokličete.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, Različni vpenjalni elementi srebrni 10kN, odprtina 0-8mm, čeljusti BxV 60x40mm Braun klinasto vpenjalo 25kN, odprtina 0-10mm, čeljusti z žagastimi zobmi BxV 60x100mm Pnevmatsko vpenjalo zeleno z nadzorno enoto 5kN, odprtina 0-10mm, čeljusti 75x25mm, 50x25mm, 25x25mm Klinasto vpenjalo 100kN zeleno, odprtina 0-13mm, čeljusti z žagastimi zobmi BxV 50x75mm, priključek 31/12 Codsxgh Igopfx Aa Segn

Stanje: rabljeno, Item description: Electro-mechanical testing cylinder Manufacturer: Zwick / Roell Model: BX1-EZ010.A1K-000 10 kN Includes: - Test frame - Control electronics - 2 x load cells - Test software - Operating manual Item condition: Used item Scope of delivery as shown in the pictures Please contact us if you have any questions Shipping: The quoted shipping costs apply to deliveries within Germany Worldwide shipping available (please request shipping costs for destinations outside of Germany) The given shipping costs apply to shipping within Germany Csdpowp Hr Sofx Aa Sjgn Sale exclusively to commercial customers; no warranty or guarantee offered Deviations from technical data and errors in the product description may occur and are reserved.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Technical Specification Universal Testing Machine UTS Testsysteme / Zwick Roell ZMART.PRO 1150.00803 Identification Data Name: Universal Testing Machine Model / Type: ZMART.PRO 1150.00803 Manufacturer: UTS Testsysteme GmbH / Zwick Roell Year of manufacture: 2001 Place of manufacture: Ulm, Germany Serial number: 0109 3045 Drive Unit Servo actuator: GEORGI KOBOLD, type KSY 4612.20-2 R6 Actuator power: 400 × 3.80 W Planetary gearbox: NEUGART, type PL 115-25 Maximum load: up to 50 kN Measuring Table Material: metal Dimensions: 900 × 500 mm Control System Control cabinet: BZ1 controller – MM050M1.UT01 Controller serial number: 821501/11 Computer / software: TESTXPERT by Zwick Roell Measuring Head Manufacturer: Zwick / Roell Cjdpfx Aasxbrm As Segn Year of manufacture: 2014 Type: Series K Rated load: 50 kN Summary The machine is a complete universal testing system designed for mechanical testing of material specimens under loads up to 50 kN. Equipped with a modern measurement head (year 2014) and TESTXPERT software from Zwick Roell, it enables a wide range of strength tests in accordance with current standards. This device – the universal testing machine UTS Testsysteme / Zwick Roell ZMART.PRO – is intended for strength testing of materials and structural components. Main applications: - Tensile tests – determining the force required to break a sample (e.g., metal, plastic, rubber, composite) - Compression tests – assessing material behavior under high pressure - Bending and fracture tests – testing resistance to fracture under static load - Cyclic and fatigue tests – evaluating the durability of components under repeated loading - Material characterization – determining parameters such as yield strength, tensile strength, modulus of elasticity, elongation at break, etc. Application areas: - Research laboratories (universities, institutes, certification bodies) - Plastics industry – testing properties of new composites, technical plastics, rubbers - Metal and aerospace industry – quality testing of metal alloys, aluminum, steel - Automotive industry – quality control of parts and structural materials - Quality control in mass production – testing samples before market release.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Test method: Vickers Test forces: HV0.2 / 0.3 / 0.5 / 1 / 2 / 3 / 5 / 10 Scope of delivery: - Hardness testing device - Diamond indenter 136° Vickers - LED illumination - Cross table 135 x 135mm - Objective turret - Objectives 20X / 40X / 60X Optional: - VMS3 (video measuring system) Cedodmz Uzspfx Aa Segn - Digital micrometer screw - PC system

Leto izdelave: 2013, Stanje: dober (rabljeno), Univerzalni preizkuševalni stroj Zwick/roll Tip: 1488 Posodobljen leta 2013 s programsko opremo Največja preskusna sila: 200 kN Cgodpfxjxw N Uvo Aa Sjn Potreben prostor: Širina: 2.000 mm Višina: 2.100 mm Globina: 800 mm Teža pribl. 1.000 kg.

Leto izdelave: 1985, Stanje: potreben popravila (rabljeno), Funkcionalnost: omejena funkcionalnost, Schenk-Trebel Materials Testing Machine Type RME 250 kN • Load frame and drive by Schenk Trebel, year of manufacture 1985, total height approx. 3.3 m. Crosshead travel approx. 2 m • Modernisation around end of 2003: equipped with "testControl" control electronics by ZwickRoell • Retrofit in 2010: Universal extensometer system MultiXtens by ZwickRoell, with swivel unit and two pairs of measuring probes (see photo), as well as new testControl module • Info: The testControl module operates in conjunction with the current "testXpert III" software by ZwickRoell (software not included in scope of supply) Cgsdsyhb Rljpfx Aa Son • Temperature chamber (see photo) retractable into test area of the machine, built in 2006 by RS-Simulatoren Prüf- & Messtechnik, heatable up to approx. 200°C; coolable with liquid nitrogen down to approx. –40°C • Load cells: 250 kN and 50 kN (currently installed, see machine photo); additionally: 5 kN, 1 kN and 500 N (see photo) • 2 wedge specimen grips (see photo) Machine condition The machine was used for testing until early 2026. The following were in use: the 50 kN load cell and the crosshead travel sensor (both sensors: last calibration 06.05.2024 incl. standard inspection). A fault in the servo amplifier for the drive (component of the testControl module) has, since around autumn 2025, caused frequent disconnections from the software and stoppages of the drive until a full hardware and software restart. The servo amplifier or the entire testControl module will need to be replaced (cost details available from the supplier). The 250 kN load cell was last calibrated on 11.02.2021 but has not been used for measurements since. The other load cells, the MultiXtens system, and the temperature chamber have not been used or calibrated in recent years. The two hydraulic clamping devices shown installed in the machine in the photos will be removed and remain with the seller.

Stanje: dober (rabljeno), Zwick Typ: BT2-FZ0.5TS.D16 500 N + Xforce P 500N Stroj na zkoušení materiálů Zkušební síla v tahu / tlaku: 500 N Celková výška bez horní příčníky: 789 mm Celková šířka: 411 mm Celková hloubka: 622 mm Zastavěná plocha: Čistá plocha pro ustavení: 0,008 m² Základní plocha rámu: 0,196 m² Specifické zatížení podlahy: Podle typických vestaveb: 0,85 kg/cm² S 50% bezpečnostní rezervou: 1,28 kg/cm² Zatížení stropu: Podle typických vestaveb: 97 kN/cm² S 50% bezpečnostní rezervou: 146 kN/cm² Hloubka pracovního prostoru: 105 mm Výška pracovního prostoru s konzolou namontovanou nahoru: Minimální výška: 235 mm Maximální výška: 565 mm Cgsdpfxew Ib Uws Aa Son Výška pracovního prostoru s konzolou namontovanou dolů: Minimální výška: 90 mm Maximální výška: 420 mm Hmotnost: cca 78 kg s příslušenstvím Stav: použité Rozsah dodávky: (viz foto) (Údaje a technické specifikace se mohou změnit a mohou obsahovat chyby!) V případě dalších dotazů nás neváhejte kontaktovat telefonicky.

Stanje: rabljeno, Zwick skúšobný stroj na ťah Typ: Z20 Ovládanie BX1-EZ020.A4K-000 Technické údaje: Zdvih: 200 mm Rozmery piestu (V x Š x H): 1037 x 385 x 180 mm Fmax: 20 kN Vmax: 125 mm/s Príslušenstvo: Extenzometer ClipOn 13,5 mm Extenzometer MFA 25 (teplotný rozsah do +200°C) Počítač + softvér testXpert II V3.5 Klimatická komora: Airtemp LKG-K-TK-50-040/150 Teplotný rozsah: -40°C až +150°C Klimatický teplotný rozsah: 20°C až +90°C Rozsah vlhkosti: 10% až 95% Testovací priestor: 50 litrov Rýchlosť zmeny teploty: 1 K/min Cgsdox A Aa Ajpfx Aa Sen Chladivo: R404, 5 kg Napätie: 400V 3Ph/N/PE/50 Hz 16 A 9 kW Stav: používaný Celková hmotnosť cca 1500 kg Obsah dodávky: (pozri obrázok) (Zmeny a chyby v technických údajoch vyhradené!) Ďalšie otázky vám radi zodpovieme telefonicky. Písomnú objednávku možno zaslať e-mailom alebo faxom.

Stanje: rabljeno, Zwick Tip: HA 50 Dimenzije: V 2685 mm x Š 1040 mm x G 750 mm Postavitvena površina: 1600 cm² Tehnični podatki: Fmax: 50 kN Vmax: 1500 mm/s Delovni prostor - maksimalna višina: 1370 mm Delovni prostor - širina: 565 mm Oprema: Kistler merilnik sile 50 kN preko NI-Labview Hidravlična agregat 280 bar Postavitvena površina: 415 cm² Vpenjalno orodje / nosilec vzorcev prisoten (Univerzalna prirobnica, visokotrdne čeljusti za nosilec vzorcev) Računalnik + programska oprema testXpert R V6.0.0 Stanje: rabljeno Obseg dobave: (glejte sliko) Teža cca 1200 kg brez okvirja ipd. (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih!) Za dodatna vprašanja smo vam na voljo po telefonu. Cgedjx A Aaijpfx Aa Ssn