Kabinet Cts nakup rabljenega (669)

Stanje: zelo dobro (rabljeno), CTS TV-70/530 klimatska preizkuševalna komora Proizvajalec: CTS Clima Temperatur Systeme GmbH Tip: TV-70/530 Vrsta stroja: klimatska preizkuševalna komora / shaker komora Volumen preizkusnega prostora: ca. 530 litrov Naprodaj je rabljena klimatska preizkuševalna komora proizvajalca CTS Clima Temperatur Systeme GmbH. Sistem je bil zasnovan za kombinirana temperaturna in vibracijska testiranja ter je primeren za simulacijo okoljskih vplivov, preizkušanje materialov, elektronske preizkuse, zagotavljanje kakovosti, razvoj in obremenitvene teste. Opomba: Shaker / vibracijski spodbujevalnik ni vključen v ponudbo. Tehnični podatki Notranje mere preizkusnega prostora: ca. 850 x 730 x 860 mm (Š x G x V) Zunanje mere: ca. 1450 x 2250 x 2000 mm (Š x G x V) Teža: ca. 1.200 kg Iedpfx Ajzd Uq Ajbxoth Temperaturno območje: -70 °C do +180 °C Hitrost segrevanja: ca. 5 K/min Hitrost hlajenja: ca. 5 K/min Hladilno sredstvo: R404A / R23 Nazivna moč: 16 kW Nazivni tok: 29,1 A Oprema Shaker komora za kombinirana testiranja Preizkusni prostor pripravljen za vibracijske aplikacije Kaskadni hladilni sistem Testiranje temperature Dodatna oprema glede na slike Področja uporabe Testiranje temperature Kombinirani klimatsko-vibracijski testi Simulacija okolja Preizkusi elektronike Preizkusi materialov Zagotavljanje kakovosti Raziskave in razvoj Obseg dobave 1x CTS TV-70/530 klimatska preizkuševalna komora Obseg dobave kot na slikah Stanje Rabljeno / Used Videno stanje glede na slike Shaker / vibracijski spodbujevalnik ni vključen v ponudbo. Slike prikazujejo predmete, stroje ali drugo dodatno opremo, ki ni izrecno navedena, ti niso vključeni v obseg dobave. Dobava kot prikazano. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter vmesne prodaje.

Stanje: zelo dobro (rabljeno), CTS Climate Chamber / Climate Test Cell We are offering a CTS climate chamber / climate test cell. Available from mid-January 2023! Water-cooled Height-adjustable! Footprint approx. (W x D x H): 3755 x 3470 x 2480 mm Test room approx. (W x D x H): 2500 x 2720 x 2200 mm Itedpozd R A Uofx Abxoh Test chamber volume: approx. 15 m³ Temperature range: -40°C to +140°C Temperature deviation: 1 K over time Average temperature change rate (without heat radiation, measured at supply air): Heating: 2 K/min Cooling: 1 K/min (from +110°C to -35°C) Climate tests: Temperature range: +10°C to +90°C Humidity range: +30% to +95% RH In dew point range: +5°C to 89°C Temperature deviation: 0.5 K over time Humidity deviation: ±1–±3% RH over time Rated voltage: 400V 3/N, PE, 50 Hz Nominal power: 53.5 kW Rated current: 92.3 A Compressor: S6J-16.2 Includes chiller Refrigerant: R404A Weight: 5,500 kg Type: CW-40/16 Condition: used Scope of delivery: (see image) (Technical data and specifications are subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), CTS Model: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control: 32-bit controller LCD control panel Digital display of set and actual values Numeric entry of set values Clear-text error messages Itsdpezd Rzwefx Abxeh RS 232 interface Free switching channels for customer-side test specimen control Temperature tests: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Heat radiation: approx. 1000 W at +20°C, approx. 200 W at -25°C Nitrogen inertization with residual oxygen monitoring: With nitrogen inertization, the test chamber is initially purged with a large amount of N₂ until the oxygen content drops below 3%. Then it switches to a base flow (approx. 10% of the full purging amount). The baseline nitrogen flow is measured with a flow meter, displayed, and monitored via a limit switch. O₂ monitoring continuously extracts gas from the test chamber via a flame arrestor and channels it over an O₂ sensor to monitor the residual oxygen content in the extracted air. After measurement, the gas passes through a second flame arrestor back into the test chamber. The exhaust pump is monitored by a flow meter. Further details can be found in the user manual by Dräger in the appendix. Note: The gas system is currently out of service! The technical data refer to an ambient temperature of +25°C, rated voltage of 400V, without test material, without radiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 21.6 kW Nominal current: 36.5 A Protection rating: IP 54 Condensate drain: non-pressurized R 1/2" female thread Sound pressure level:

Stanje: zelo dobro (rabljeno), CTS C-70/350 klimatska testna komora Proizvajalec: CTS Clima Temperatur Systeme GmbH Tip: C-70/350 Vrsta naprave: klimatska testna komora / komora za preskušanje temperature in vlage Prostornina testnega prostora: cca 350 litrov Naprodaj je rabljena klimatska testna komora CTS C-70/350 iz industrijske uporabe. Naprava je primerna za temperaturna in klimatska testiranja, simulacije okolja, preskuse materialov, preizkuse elektronike, zagotavljanje kakovosti ter za raziskave in razvoj. Tehnični podatki: Temperaturno območje: -70 °C do +180 °C Klimatsko delovno območje: +10 °C do +95 °C Območje vlage: 10 % do 98 % r. F. Območje rosišča I: +7 °C do +94 °C Območje rosišča II: -10 °C do +7 °C Časovna stabilnost temperature: ≤ ±0,3 K Stabilnost vlage I: ≤ ±1,5 % r. F. Stabilnost vlage II: ≤ ±3 % r. F. Hitrost hlajenja: cca 3,5 K/min Hitrost segrevanja: cca 3,5 K/min Maks. toplotna obremenitev pri +20 °C: cca 3000 W Mere testnega prostora: cca 650 x 720 x 750 mm (Š x G x V) Zunanje mere: cca 920 x 1665 x 1800 mm (Š x G x V) Teža: cca 550 kg Električni priklop: 400 V, 3/N, 50 Hz Priključna moč: cca 7,1 kW Nazivni tok po tablici: cca 11,5 A Stopnja zaščite: IP22 Itjdpfxezd D Nzs Abxjh Zvočni tlak: < 58 dB(A) Hladilno sredstvo: Predhladilna stopnja: R404A, cca 2,3 kg Hladilna stopnja: R23 Obratovalni nadtlak PS: 25 bar Preizkusni tlak PT: 20 bar Oprema - Upravljalni zaslon na dotik - Ogledno okno v vratih - Notranjost iz nerjavečega jekla - Osvetlitev preskusnega prostora - Vstavljive rešetke iz nerjavečega jekla - Kabelska odprtina Ø 50 mm desno, sredinsko - Kapacitivni sistem za merjenje vlage - Programski temperaturni omejevalnik Min. / Max. - USB priključek za shranjevanje podatkov - Ethernet vmesnik - RS232 vmesnik - Zračno hlajena izvedba - Dokumentacija / navodila za uporabo - Servis / pregled Stanje: Rabljeno / Used Vizualno stanje po slikah Prisotne običajne sledi uporabe in skladiščenja Obseg dobave - CTS C-70/350 klimatska testna komora - Vstavljive rešetke - Upravljalni panel / krmiljenje - Dokumentacija / navodila za uporabo - Pribor kot na slikah Ogled možen po predhodnem dogovoru. Dostava ali pošiljanje s špediterjem je možno. Obseg dobave kot na sliki. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter vmesne prodaje.

Stanje: zelo dobro (rabljeno), CTS klimatska testna komora C-70/1000-S Podatki o napravi: Proizvajalec: CTS GmbH Tip: C-70/1000-S Izvedba: klimatska testna komora / komora za simulacijo okolja Hlajenje: vodno hlajena Opis: Rabljena CTS klimatska testna komora za natančno temperaturno in klimatsko testiranje. Primerna za teste materialov, komponent ter preskuse zanesljivosti. Uporaba v industriji, raziskavah, razvoju in kontroli kakovosti. Temperaturni in klimatski podatki: Temperaturno območje: -70 °C do +180 °C Spreminjanje temperature: pribl. 2,5 K/min ogrevanje Spreminjanje temperature: pribl. 2,5 K/min hlajenje Območje vlage: 10 % do 98 % r.h. Območje rosišča I: +7 °C do +94 °C Območje rosišča II: -10 °C do +7 °C Električni podatki: 400 V / 3/N / 50 Hz Moč: 9,7 kW Tok: 17,9 A Stopnja zaščite: IP 22 Hladilni sistem: Hladilno sredstvo: R404A / R23 Predhladilna faza: R404A, 2,3 kg Hlajenje: R23, 0,86 kg / 15 bar Obratovalni nadtlak PS: 25 bar Preskusni tlak PT: 27,5 bar Oprema: CTS upravljalna enota z LCD-prikazom Programski način Digitalni prikaz želene/dejanske vrednosti Okno za opazovanje v vratih Notranji prostor iz nerjavečega jekla Zaščita preizkusnih vzorcev / temperaturni omejevalnik Notranja osvetlitev Bočni prehodi za kable Prehodi pribl. 50 mm in pribl. 125 mm RS232-vmesnik po dokumentaciji Digitalni izhodi za nadzor preskusnih vzorcev Premična izvedba na kolesih Dimenzije: Prostornina notranje komore: pribl. 1000 litrov Dimenzije (Š x G x V): pribl. 2245 x 1270 x 1950 mm Transportne mere (Š x G x V): pribl. 2350 x 1290 x 2000 mm Teža: Testna komora: pribl. 1000 kg Povratni hladilnik: pribl. 120 kg Dokumentacija: Izjava o skladnosti Preskusna potrdila Navodila za uporabo Obvestila in digitalni kanali Načrt postavitve Kratek priročnik Diagram vlage Obseg dobave: CTS klimatska testna komora C-70/1000-S Dokumentacija, če je na voljo Obseg dobave po sliki Preizkus delovanja Itodpfx Aey Iam Hobxsh Servis hladilnega sredstva Preizkus tesnosti Stanje: rabljeno. Stanje vidno na slikah. Ogled možen po dogovoru. Po želji je mogoče organizirati nakladanje in prevoz. Pridržujemo si pravico do sprememb in vmesne prodaje. Za dodatna vprašanja nas kontaktirajte.

Stanje: zelo dobro (rabljeno), CTS temperaturni šok testni kabinet Tip: TSS-70/32 Proizvajalec: CTS Klima Temperatur Systeme Izvedba: zračno hlajenje Na prodaj je CTS temperaturni šok testni kabinet za testiranje temperaturnih sprememb in šokov v industriji, raziskavah in razvoju. Tehnični podatki: Volumen testnega prostora: pribl. 32 litrov Največja teža testnega vzorca: pribl. 10 kg Temperaturna območja: Topla komora: +50 °C do +200 °C Isdsy I Ntcepfx Abxoth Hladna komora: -80 °C do +100 °C Zmogljivost: Hitrost ogrevanja: pribl. 6 K/min Hitrost hlajenja: pribl. 6 K/min Hitrost temperaturnega prehoda: do pribl. 100 K/min Čas preklopa: < 10 sekund Temperaturno odstopanje: ±1 K / ±2 K Električni podatki: Priklop: 400 V / 3/N / 50 Hz Nazivna moč: pribl. 9,7 kW Nazivni tok: pribl. 15,4 A Varovalka: 16 A (počasna) Stopnja zaščite: IP 22 Hladilno sredstvo: R404A: 2,3 kg / R23: 0,90 kg Tlačni podatki: Delovni nadtlak: 25 bar Testni pritisk: 27,5 bar Dimenzije: pribl. 1325 x 2012 x 1820–2020 mm (Š x G x V) Teža: pribl. 650 kg Dodatni podatki: Zvočni tlak: < 58 dB(A) Priključek za stisnjen zrak: 1/4" zunanje navoj Oprema: Dvo-komorni sistem (topla/hladna komora) Digitalno CTS upravljanje Zaslon / upravljalna enota Programski način delovanja Števec delovnih ur Opazovalno okno Notranja osvetlitev Omejevalnik temperature Zaščita testnega vzorca RS232 vmesnik Dokumentacija: Priložena izjava o skladnosti Priloženi testni certifikati Priložena navodila za uporabo Priložen električni načrt Priložena shema cevi Priložena hitra navodila Priloženi varnostni listi Opomba: Miza, ki je prikazana na fotografijah, ni del prodaje. Stanje: Rabljeno Vizualno stanje po slikah Obseg dobave kot je prikazano Ogled možen po dogovoru. Nalaganje je možno organizirati. Poslovna prodaja (Spremembe in napake v tehničnih podatkih so pridržane!) Za dodatna vprašanja nas lahko kontaktirate po telefonu.

Stanje: zelo dobro (rabljeno), CTS temperaturni šok testna komora TSS-70/350-A Podatki o napravi Proizvajalec: CTS GmbH Tip: TSS-70/350-A Leto izdelave: 10/2017 Izvedba: Komora za temperaturni šok Hladilna enota: vodno hlajenje Opis Rabljena komora za temperaturni šok proizvajalca CTS. Primerna za preizkuse šoka in izmenične temperature. Uporaba v industriji, raziskavah in kontroli kakovosti. Področja uporabe Preizkušanje materialov Testi staranja Testi elektronike in komponent Testi temperaturnega šoka Avtomobilska industrija in kontrola kakovosti Temperaturna območja Topla komora: +50 °C do +220 °C Hladna komora: -70 °C do +100 °C Električni podatki 400 V / 3/N / 50 Hz Moč: 19,8 kW Tok: 46,5 A Priključek: CEE 63A Hladilni sistem Predhlajenje: R452A, 7,2 kg Hladilna stopnja: R23, 2,8 kg Itedpfx Abey H Hk Aoxsh CO₂-ekvivalent: 15,41 t / 41,59 t Vodno hlajenje Tlak / Zaščita PS: 25 bar PT: 27,5 bar IP 54 Oprema Touchscreen upravljanje Mikroprocesorsko vodenje Programski način Digitalni prikaz nastavljene/fizične vrednosti 2-conski sistem Premični nosilec za hitro menjavo Opazovalno okno Vgrajena elektro omara Priključki za hladilno vodo Tehnična izvedba Ločeni topli in hladni komori Notranjost iz nerjavnega jekla Industrijska izvedba Mere Dimenzije: Zunanje mere (VxŠxG): ca. 2450 x 2160 x 2200 mm Notranje mere (VxŠxG): ca. 610 x 850 x 680 mm Teža: pribl. 2500 kg Dokumentacija Izjava o skladnosti Certifikati preizkusov Navodila za uporabo Električna shema in načrt cevovodov Seznam rezervnih delov Servis pred dobavo (opcijsko) Funkcionalni preizkus Servis hladilnega sredstva Preizkus tesnosti Preizkusni zagon s protokolom Stanje Rabljeno. Vizualno stanje: glejte slike. Obseg dobave Testna komora TSS-70/350-A Dokumentacija (če je na voljo) Ogled možen po dogovoru. Nakladanje in transport organiziramo po želji. Pridržujemo si pravico do sprememb in predhodne prodaje. Za vprašanja nas prosimo kontaktirajte.

Stanje: zelo dobro (rabljeno), CTS temperaturna testna komora T-40/25 Tehnični podatki Proizvajalec: CTS Clima Temperatur Systeme Tip: T-40/25 Temperaturno območje: -40 °C do +180 °C Volumen testne komore: 25 litrov Hitrost spremembe temperature: Ogrevanje: 8,0 K/min Hlajenje: 6,5 K/min Časovno temperaturno odstopanje: ±0,5 do ±1 K Dimenzije testne komore (Š x G x V): 350 x 240 x 300 mm Zunanje dimenzije (Š x G x V): 595 x 580 x 860 mm Električni podatki: Nazivna napetost: 230 V 1/N 50 Hz Nazivna moč: 1,86 kW Nazivni tok: 8,53 A Stopnja zaščite: IP20 Hladilno sredstvo: R404A Količina polnjenja: 0,8 kg Obratovalni nadtlak: 25 bar Preskusni tlak: 20 bar Oprema: Itodpfjzcxmtox Abxeh LCD upravljalna enota Digitalni prikaz nastavljene/dejanskih vrednosti RS232 vmesnik Testna komora iz nerjavečega jekla, material 1.4301 Okno 200 x 200 mm Zaklenljiva vrata Zračno hlajena hladilna enota EASYLog podatkovni zapisovalnik 3 polic iz nerjavečega jekla Teža: pribl. 90 kg Za varnost naših strank izvajamo naslednja dela na ponujenih klimatskih komorah vnaprej: 1. Preverjanje delovanja in menjava potrebnih komponent 2. Po potrebi novo polnjenje s hladilnim sredstvom v skladu z zakonodajo 3. Preizkus tesnosti s certifikatom 4. Dokumentiran poskusni zagon po uspešnem pregledu Stanje: rabljeno Obseg dobave: (glej sliko) Ogled po dogovoru mogoč. Nakladanje je možno organizirati. (Spremembe in napake v tehničnih podatkih so pridržane!) Dodatna vprašanja z veseljem odgovorimo po telefonu.

Stanje: zelo dobro (rabljeno), CTS klimatska testna komora C-70/600 Tip: C-70/600 Proizvajalec: CTS Klima Temperatur Systeme Izvedba: zračno hlajena Naprodaj je CTS klimatska testna komora za temperaturna in klimatska testiranja v industriji, raziskavah, razvoju in zagotavljanju kakovosti. Stanje / prikaz: Rabljena naprava, optično stanje je razvidno s slik. Iedpfoy I Tdxox Abxsth Prikaz v ročnem načinu / stop. Dejansko izmerjena temperatura: 16,59 °C Nastavljena temperatura: 5,00 °C Dejansko izmerjena vlaga: 39,7 % r. v. Rezerva vode: 11,0 l Posebnosti: Razširjen temperaturni razpon do +210 °C (veliko standardnih izvedb le do +180 °C) Tehnični podatki: Temperaturno območje: -70 °C do +210 °C Območje vlage: 10 % do 98 % r.v. Območje rosišča: -10 °C do +94 °C Spreminjanje temperature: cca 2,5 K/min (ogrevanje/hlajenje) Volumen testne komore: cca 600 litrov Električni podatki: Priključek: 400 V / 3/N / 50 Hz Nazivna moč: cca 9,0 kW Nazivni tok: cca 14,6 A Zaščitni razred: IP 22 Hladilni sistem: Hladilno sredstvo: R452A / R23 Kaskadni hladilni sistem za ekstremno nizke temperature do -70 °C Tlačni podatki: Obratovalni nadtlak: 25 bar Testni tlak: 27,5 bar Testna komora: notranje mere: cca 850 x 850 x 830 mm Dimenzije: cca 1900 x 1115 x 1850 mm Teža: cca 800 kg (odvisno od opreme) Oprema: Opazovalno okno Testna komora iz nerjavečega jekla Digitalni prikaz nastavljenih/dejanskih vrednosti Zaščita testnega vzorca / omejevalnik temperature Priklop za demineralizirano vodo Odtok kondenzata Cevni preboji RS232 vmesnik Digitalni izhodi za krmiljenje preizkušanih vzorcev Obseg dobave: CTS klimatska testna komora C-70/600 Obseg dobave kot prikazano na slikah Servis / priprava: Preverjanje delovanja in zamenjava potrebnih komponent Ponovno polnjenje s skladnim hladilnim sredstvom (po potrebi) Preizkus tesnosti s certifikatom Dokumentiran preizkusni tek Ostalo: Ogled možen po dogovoru Organiziramo nakladanje Poslovna prodaja (pridržujemo si pravico do sprememb in napak v tehničnih podatkih!) Z veseljem odgovorimo na dodatna vprašanja po telefonu.

Stanje: zelo dobro (rabljeno), CTS klimatska testna komora C-70/600 Podatki o napravi Proizvajalec: CTS GmbH Tip: C-70/600 Isdpfx Abey H H D Aoxoth Izvedba: klimatska testna komora Hlajenje: zračno hlajena Opis Rabljena klimatska testna komora CTS. Primerna za temperaturna in klimatska testiranja. Uporaba v raziskavah, razvoju in zagotavljanju kakovosti. Obratovalno stanje Prikaz: ročno delovanje / ustavljeno. Temperatura: 16,59 °C (dejansko) / 5,00 °C (nastavljeno). Vlaga: 39,7 % RH. Zaloga vode: 11,0 l. Tehnični podatki Temperaturno območje: -70 °C do +180 °C Območje vlage: 10 % do 98 % RH Območje rosišča: -10 °C do +94 °C Prostornina testnega prostora: 600 litrov Električni podatki 400 V / 3/N / 50 Hz Moč: 8,7 kW Tok: 14,8 A Stopnja zaščite: IP 22 Hladilni sistem Hladilno sredstvo: R404A / R23 Kaskadni hladilni sistem Obratovanje pri nizkih temperaturah do -70 °C PS: 25 bar PT: 27,5 bar Oprema Opazovalno okno Testni prostor iz nerjavečega jekla Digitalni prikaz nastavljene/dejanske vrednosti Zaščita testiranega vzorca / temperaturni omejevalnik Priključek za vodo (deionizirana voda) Odvod kondenzata Cevni prehodi RS232 vmesnik Digitalni izhodi Dimenzije Notranje: pribl. 850 x 850 x 830 mm Zunanje: pribl. 1900 x 1115 x 1850 mm Teža: pribl. 600 kg Obseg dobave CTS klimatska testna komora C-70/600 Dokumentacija (če je na voljo) Funkcijski preizkus Servis hladilnega sredstva Preverjanje tesnosti Preizkusno delovanje s protokolom Stanje Rabljeno. Dejansko stanje glejte slike. Ogled mogoč po dogovoru. Nakladanje in transport po želji organiziramo. Pridržujemo si pravico do sprememb in vmesne prodaje. Za dodatna vprašanja nas kontaktirajte.

Stanje: zelo dobro (rabljeno), CTS klimatska testna komora C-70/600 Podatki o napravi Itedpsy H Hl Hefx Abxjh Proizvajalec: CTS GmbH Tip: C-70/600 Izvedba: klimatska testna komora Hlajenje: zračno hlajenje Opis Rabljena klimatska testna komora proizvajalca CTS. Primerna za temperaturna in klimatska testiranja. Uporaba v industriji, raziskavah in zagotavljanju kakovosti. Tehnični podatki Temperaturno območje: -70 °C do +180 °C Območje vlažnosti: 10 % do 98 % rel. vlage Območje rosišča: -10 °C do +94 °C Volumen testne komore: 600 litrov Električni podatki 400 V / 3/N / 50 Hz Moč: 8,7 kW Tok: 14,8 A Zaščitni razred: IP 22 Hladilni sistem Hladilno sredstvo: R404A / R23 Kaskadni hladilni sistem Globokotemperaturno delovanje do -70 °C PS: 25 bar PT: 27,5 bar Oprema Opazovalno okno Notranjost iz nerjavečega jekla Digitalni prikaz želenih/dejanskih vrednosti Zaščita testiranega blaga / temperaturni omejevalnik Priključek za vodo (demineralizirana voda) Odvod kondenzata Prehodi za cevi RS232 vmesnik Digitalni izhodi Dimenzije Notranje: pribl. 850 x 850 x 830 mm Zunanje: pribl. 1900 x 1115 x 1850 mm Teža pribl. 600 kg Obseg dobave CTS klimatska testna komora C-70/600 Dokumentacija (če je na voljo) Servis pred dobavo (opcijsko) Preizkus delovanja Servis hladilnega sistema Kontrola tesnosti Preskusni zagon s protokolom Stanje Rabljeno. Vizualno stanje glejte slike. Ogled možen po dogovoru. Organizacija nakladanja in prevoza po dogovoru. Spremembe in vmesna prodaja so pridržane. Za vprašanja nas kontaktirajte.

Stanje: zelo dobro (rabljeno), CTS Climatic Test Chamber CS-70/600-5/S Device Data Manufacturer: CTS GmbH Model: CS-70/600-5/S Design: Climatic test chamber Cooling: water-cooled Description Used climatic test chamber from CTS. Suitable for temperature, climate, and stress screening tests. Intended for use in industry, research, and quality assurance. Operating Condition Display: Manual operation / Warning (drain water bath). Operating Hours Total: 19,788 h Compressor cooling: 8,699 h Pre-cooling compressor: 11,432 h Circulation pump: 2,905 h Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% r.h. Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 18.4 kW Current: 30.6 A Protection class: IP 22 Refrigeration System Refrigerant: R404A / R23 Pre-cooling stage: 5.0 kg Cooling stage: 2.1 kg / 14.5 bar CO₂ equivalent: 19.61 t / 30.93 t GWP: 3922 / 14800 Pressure Data PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber CTS Touch-/LCD control unit Program operation Sample protection / temperature limiter Water-cooled refrigeration unit Humidity system with water bath Automatic water refill possible Interfaces (RS232 / Ethernet) Integrated control cabinet Industrial design Ports 1x NW 50 2x NW 125 Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1120 x 1875 mm Weight approx. 750 kg Scope of Delivery CTS Climatic Test Chamber CS-70/600-5/S Documentation / test certificates (if available) Service prior to delivery (optional) Function test Refrigerant service Leakage test Test run with protocol Condition Isdey H Hmwspfx Abxjth Used. Visual condition as per photos. Note Used device, sale without warranty. Inspection by appointment possible. Loading and transport can be organized on request. Subject to change and prior sale. If you have any questions, feel free to contact us.

Stanje: zelo dobro (rabljeno), CTS Type: TSS-70/350-A Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. The unit is designed for conducting thermal shock tests and is typically used in industry, research, and quality assurance. Areas of application: - Material testing - Aging tests Iedpfx Absy Hkgbexjth - Electronics and component testing - Thermal shock and cyclic temperature testing Technical data: Type: TSS-70/350-A Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -70°C to +100°C Electrical data: - Connection: 400 V, 3/N, 50 Hz - Rated power: approx. 20.4 kW - Rated current: approx. 36.5 A Refrigeration system: - Refrigerant: R404A / R23 - Pre-cooling stage: approx. 6.0 kg - Cooling stage: approx. 3.0 kg - water-cooled Features / Equipment: - CTS control panel with touch display - Microprocessor-controlled regulation and monitoring system - Programmable operation - Digital display of set and actual values - 2-zone system (hot and cold chambers) - Automatic specimen carrier for shock tests Technical specification: - Hot and cold chambers separated - Carrier system for rapid temperature change - Test space made of stainless steel - Shelf / wire rack - Viewing window in the door - Water cooling connections available - Integrated control cabinet Dimensions: - External dimensions (HxWxD): approx. 2450 x 2160 x 2200 mm - Internal dimensions (HxWxD): approx. 610 x 850 x 680 mm - Weight: approx. 2500 kg Additional data: - Protection class: IP 54 - Operating overpressure: approx. 25 bar - Test pressure: approx. 27.5 bar Safety information for buyers: The following procedures are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: see pictures (Specifications subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), CTS Model: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for carrying out thermal shock tests and is typically used in industry, research, and quality assurance. Areas of application: - Material testing - Aging tests - Electronics and component testing - Thermal shock and alternating temperature tests Technical specifications: Model: TSS-70/130 Test volume: 130 liters Temperature range: Isdpfoy Hkd Hsx Abxjth Hot zone: +50°C to +200°C Cold zone: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K over time ±2 K spatially Temperature change rate: Max. 100 K/min average for shock test applications Without radiant heat Transfer time between chambers: ≤ 15 min in the range of -65°C to +200°C (with 10 kg ICs) Changeover time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A Building-side protection: 32 A slow-blow fuse Power plug: Cekon 32 Refrigeration system: Refrigerants: R404A / R23 Water-cooled, low noise, fully hermetic Equipment / features: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for user side test object control - Fault alarm on volt-free contact Load: up to 30 V DC, 2 A - EMC-tested Technical configuration: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber / basket made of stainless steel, material grade 1.4301 - Insert basket made of stainless steel wire - Piping port NW 50 with closure plug - Compressed air connection 1/4" male thread - Non-pressurised condensate drain R 1/2" female thread - Safety door lock - Lockable door with window Dimensions according to installation plan: External dimensions approx.: 2335 x 940 x 1820 mm Insertion dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm Width approx. 480 mm Depth approx. 660 mm Window: 300 x 300 mm Additional data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average test cycle consumption: approx. 8 kWh Important buyer safety information! The following procedures are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant where required 3. Leak tightness test with certificate 4. After a successful check, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see images (Specifications subject to change and error!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), CTS Model: C-70/600 Climate Chamber CTS C-70/600 air-cooled version with observation window, specimen protection, and documentation For sale is a high-quality CTS climate chamber, model C-70/600, suitable for precise temperature and climate testing in research, development, quality assurance, and industrial applications. Technical specifications: Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Power supply: 400 V 3/N 50 Hz Rated power: 8.7 kW Rated current: 14.8 A Protection class: IP 22 Refrigerants: R404A (precooling) / R23 (cooling stage) Cascade refrigeration system for low-temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features / Equipment: Observation window in the door Stainless steel test chamber CTS control unit with digital set/actual value display Specimen protection / temperature limiter Water connection / DI-water inlet Test chamber and condensate drain Feedthroughs on the sides of test chamber RS232 interface as per documentation Digital outputs for specimen control Test chamber dimensions (according to documentation): approx. 850 x 850 x 830 mm External dimensions (according to documentation): approx. 1900 x 1115 x 1850 mm Weight (according to documentation): approx. 600 kg Itodpfey Hkazox Abxeh Scope of supply: CTS climate chamber C-70/600 incl. available documentation / user manuals Scope of supply as shown in the pictures For your safety as a buyer: The device can be inspected by arrangement. Forklift loading can be organized. For your peace of mind, the following measures are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used (Specifications are subject to change and error!) If you have further questions, we are happy to assist you by phone.

Stanje: skoraj kot novo (rabljeno), Delovne mere: Premer: 1,80 m Višina: 1,70 m Isdpjzbi Rmsfx Abxoth Kotni imajo parni plašč, ki deluje kot grelna komora; obdaja posodo in toplota se pri določenem tlaku krožno prenaša. Para se dovaja iz parnega kotla. Na splošno se uporabljajo v industriji za predelavo hranilnih živil, marmelad, želejev, čokolade, slaščic, konzerv, mesa, omak itd.

Stanje: zelo dobro (rabljeno), CTS Type: C-40/350 Air-Cooled Climate Test Chamber For sale is a professional CTS climate test chamber, model C-40/350. This device is engineered for demanding environmental simulations in industrial applications and is ideal for material testing, electronics, automotive, aerospace, and research sectors. Temperature Testing: - Temperature range: -40°C to +180°C - Temporal temperature deviation: ≤ ±0.3 K - Temperature change rate according to IEC 60068-3-5: - Heating: 3.5 K/min - Cooling: 4 K/min - Heat compensation: - Approx. 3500 W at +20°C - Approx. 2000 W at -20°C Climatic Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% r.H. - Dew point range: +5°C to 78°C Itsdox Ekupjpfx Abxeh - Temporal temperature deviation: ≤ 1.0 K - Temporal humidity deviation: ≤ +3.0% r.H. Technical specifications are based on an ambient temperature of +25°C, rated voltage of 400V, without test specimen, heat compensation, or additional equipment. Options may affect performance data. Technical Specifications: - Refrigeration unit: air-cooled, low-noise, fully hermetic, continuously variable capacity via electronic monitoring and control system, environmentally friendly refrigerant R404A - Test chamber floor load capacity: 150 kg/m² - Shelf: stainless steel, support area 620 x 600 mm - Max. load per shelf: 35 kg - Total load at maximum shelf configuration: 100 kg Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numeric input of set values - Plain-text error messages - RS 232 interface - Ethernet interface - Free switching channels for customer-side specimen control Dimensions: - Test volume: 350 liters - Internal dimensions (H x W x D): 750 x 650 x 720 mm - External dimensions (H x W x D): 1800 x 920 x 1670 mm Operating Data: - Electrical connection: 400V 3/N, 50 Hz - Rated power: 7.1 kW - Rated current: 11.5 A - Protection class: IP 54 - Sound pressure level:

Stanje: zelo dobro (rabljeno), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for conducting temperature and humidity testing on multiple test specimens simultaneously. Device Description The climate test chamber allows for the assessment of the function or material properties of test objects under the influence of temperature and humidity. Excellent air circulation with a correspondingly high recirculation rate ensures effective transfer to the test specimen. The air treatment section is located at the rear of the interior chamber. The technical units are housed behind the chamber in a separate frame and are easily accessible. The control system is located in a separate switch cabinet, with the operator panel integrated into the cabinet door. For dehumidifying the test chamber, the unit is equipped with a self-regenerating compressed air dryer. The test chamber can be purged with fresh air via a fan. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with test specimen and radiant heating, measured in supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time All technical data refer to an ambient temperature of +25 °C, nominal voltage of 400 V, without any test specimen, irradiation, or additional equipment. Dimensions: Interior (test chamber / usable space): Itodpfx Aox Eabpobxjh - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm; Width: 1600 mm; Depth: 1550 mm - External dimensions: Height: 2800 mm; Width: 2250 mm; Depth: 5000 mm Operating Data: - Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Design: Refrigeration unit: - Water-cooled, low-noise, semi-hermetic - Continuously variable capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Notes: - Inspection by appointment (46325 Borken) - Shipping by freight carrier possible – costs & arrangements on request - Scope of delivery: (see picture) (Subject to changes and errors in technical data and information!) Further questions can gladly be answered by phone.

Stanje: zelo dobro (rabljeno), CTS CW-60/5.5 – Climatic Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for simultaneous temperature and humidity testing of multiple test specimens. Device Description The climatic test chamber enables the testing of the functionality or material properties of test items under varying temperature and humidity conditions. Efficient air circulation with a high recirculating air volume ensures optimal heat and moisture transfer to the test specimens. The air conditioning unit is located at the rear of the inner chamber. Aggregates are situated behind the chamber on a separate frame and are easily accessible. The control system is housed in a separate electrical cabinet, with the control panel integrated into the cabinet door. For dehumidifying the test area, the chamber is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied to the test area via a blower for purging purposes. Isdpox Eaxbofx Abxsth Technical Performance Data: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Rate of temperature change (linear, with test items and heat radiation measured in supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, nominal voltage 400 V, without test items, radiation or additional equipment. Dimensions: Internal dimensions (test / usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Features: - Cooling unit: water-cooled, low noise, semi-hermetic, stepless power adaptation via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404A Additional Information: - Viewing by appointment (46325 Borken) - Shipping via freight carrier available – cost & organization upon request - Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), CTS CW‑60/5.5 – Climate Test Chamber, Water-cooled The CW‑60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for simultaneous temperature and humidity testing of multiple test specimens. Device Description: With this climate test chamber, the functionality and material properties of a test object can be evaluated under the influence of temperature and humidity. The chamber features efficient air circulation and a high recirculation volume, ensuring optimum transfer to the test item. The air handling system is located at the rear of the interior chamber. Major components are mounted in a separate frame behind the unit for easy access. Control equipment is housed in an independent control cabinet, with the operator panel installed in the cabinet door. To ensure dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. Additionally, the test area can be purged with fresh air via a blower. Technical Specifications: Itodpox D Abpefx Abxeh Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K (over time) - Temperature change rate (linear, with test specimen and radiant load, measured at air inlet): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K (over time) - Humidity deviation: ±1% to ±3% rH (over time) Technical data refer to ambient temperature of +25 °C, nominal voltage 400 V, with no test specimen, no external radiant load, and without additional equipment. Dimensions: Internal (test or usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection rating: IP 54 Technical Features: - Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless capacity control via electronic monitoring and control system, environmental-friendly refrigerants R 23 / R 404 A Notes: - Viewing by appointment (46325 Borken) - Shipping by freight forwarder possible – costs and arrangements upon request - Scope of delivery: (see photo) (Specifications and technical data are subject to change and error!) For further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), CTS Type: TW -60/9 Temperature Test Chamber, Water-Cooled CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: Water-cooled, low-noise, semi-hermetic, continuously variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R23 / R404A Control system: 32-bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for user-side specimen activation Technical performance data: Temperature testing: Temperature range: -60 °C to +100 °C Temperature deviation: ± 0.1 to 0.5 K over time Rate of temperature change (average), measured with test load and with radiant heat input, measured at supply air: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar module panels, 100% following Radiant heat input: 3000 watts continuous The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test load, without radiant input, and without additional equipment. Dimensions: Iodpfxsvb Hanj Abxjth Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power: 48.9 kW Rated current: 74.9 A Protection class: IP 54 Cooling water connections: supply/return R1 ¼", female thread Condensate drain, gravity R1", female thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), CTS Type: TW -60/9 Temperature Test Chamber, Water-Cooled CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: Water-cooled, low-noise, semi-hermetic, continuously variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R23 / R404A Control system: 32-bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for user-side specimen activation Technical performance data: Temperature testing: Temperature range: -60 °C to +100 °C Temperature deviation: ± 0.1 to 0.5 K over time Rate of temperature change (average), measured with test load and with radiant heat input, measured at supply air: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar module panels, 100% following Radiant heat input: 3000 watts continuous The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test load, without radiant input, and without additional equipment. Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Isdpfx Aovb E Uqsbxeth Operating data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power: 48.9 kW Rated current: 74.9 A Protection class: IP 54 Cooling water connections: supply/return R1 ¼", female thread Condensate drain, gravity R1", female thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), CTS Model: CTS CW+40/7/7 Walk-In Climatic Chamber CTS Walk-In Climatic Chamber 7m³ Temperature & Humidity Testing 40–90°C Description: For sale is an industrial-grade walk-in climate and temperature test chamber CTS CW+40/7/7. The system is designed to simulate defined temperature and climatic conditions for the testing of materials, assemblies, and technical systems under realistic environmental conditions. Temperature and humidity can be precisely controlled, with either constant or programmable test cycles possible. High air circulation ensures uniform climate distribution throughout the test area. The walk-in design enables testing of large components or complete systems. Technical Data: Manufacturer: CTS – Clima Temperatur Systeme Model: CW+40/7/7 Serial No.: 113011 Year of manufacture: 06 / 2011 Version: Walk-in climatic test chamber Test volume: 2 × 7 m³ Electrical Data: Power supply: 400 V / 3N / 50 Hz Rated power: 29.6 kW Rated current: 45.8 A Climatic Data: Temperature range: +40 °C to +90 °C Humidity range: 10% to 90% rH Dew point range: +30 °C to +87 °C Protection class: IP44 Iedjylmamepfx Abxjth Internal Dimensions: Width: 1,400 mm, Depth: 1,300 mm, Height: 2,250 mm Total External Dimensions: Width: 3,511 mm, Depth: 2,765 mm, Height: approx. 2,515 mm Additional Technical Data: Sound pressure level: 56 dB(A) Cooling: Water-cooled Heating: Stainless steel heating elements Interior: Stainless steel Exterior: Coated steel sheet (RAL 9010) Air circulation: Radial fan Control: 32-bit controller with LCD Interfaces: RS-232 / RS-485 Program and cycle operation possible Safety temperature limiter & emergency stop available Refrigerant: R404A Weight: approx. 2,000 kg Condition: used Scope of delivery: (see picture) (Specifications and technical details are subject to change and errors excepted!) Please feel free to contact us for further questions.

Stanje: zelo dobro (rabljeno), CTS Temperature Test Chamber Ijdeygup Sspfx Abxeth We offer you a CTS temperature test chamber. Water-cooled Series: T-40/600 Includes metal struts for increased floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R404A Weight: 550 kg Type: T-40/600 /011232 For your safety as a buyer, please note the following information! The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refilled with refrigerant compliant with legal regulations 3. After successful inspection, the chambers undergo a test run that is monitored with calibrated instruments. Condition: used Scope of supply: (see image) (Technical specifications subject to change and errors excepted!) Feel free to contact us by phone for further questions.

Stanje: zelo dobro (rabljeno), Here we offer you a temperature test chamber. Water-cooled Technical performance data: Temperature working range Temperature range in °C: -70 / +180°C Change rate according to DIN 50 011, Part 12 Cooling rate: approx. 5 K/min Heating rate: approx. 5 K/min Dimensions: Test volume: 350 liters Test chamber dimensions (H x W x D): approx. 750 mm x 650 mm x 720 mm External dimensions (H x W x D): approx. 1800 mm x 850 mm x 1640 mm Iodpfoyguprsx Abxsth Operating data: Electrical connection: 400 V, 3/N, 50 Hz Rated power: 13.3 kW Refrigerants: R404A / R23 Weight: approx. 650 kg Model: TS-70/350 For your security as a buyer, please note the following information! The following actions are carried out in advance on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. Refilled with compliant refrigerant according to regulations 3. After successful inspection, the chambers undergo a test run, monitored with calibrated devices. Condition: used Scope of delivery: (see pictures) (Subject to modifications and errors in technical specifications and details!) We are happy to answer further questions by phone.