Kabinet Cts nakup rabljenega (687)

Stanje: zelo dobro (rabljeno), CTS Climate Test Chamber T-70/600 Water-cooled Temperature range: -70°C to +180°C Rated voltage: 400V 3/N PE 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Compressor: TFH2480Z/TFH2511Z Refrigerant R23/R404A Control system: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for set and actual temperature values - Easy adjustment via +/- buttons - Digital input for temperature in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for customer-side test item control Rsdpfjygultjx Agtjt Shelving: Stainless steel, support surface 820 x 710 mm Load per shelf max. 35 kg Total max load for full shelf setup: 100 kg Refrigeration unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature testing: Temperature range: -70°C to +180°C Temperature deviation: ±0.1 to 10.3 K over time Temperature change rate measured in center of test chamber according to DIN 50 011, Part 12 Heating: 2.5 K/min Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refers to an ambient temperature of +25°C, rated voltage 400 V, without test specimen, without irradiation, and without auxiliary equipment. Dimensions: Test volume: 600 liters Test chamber dimensions: 850 x 830 x 850 mm (W x D x H) External dimensions: 1050 x 1850 x 1900 mm (W x D x H) Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Protection class: IP 22 Condensate drain: non-pressurized R 1/2" female thread Sound pressure level: < 62 dB(A) Weight: approx. 400 kg For your peace of mind as a buyer, please note the following: The following points are carried out on all our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If required, new filling with legally approved refrigerant 3. Leak test with certificate 4. After successful testing, chambers undergo a documented trial run. Condition: used Scope of delivery: (See photo) (Changes and errors in technical data and information subject to confirmation!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test Chamber CSR-60/810/S | –60 °C to +170 °C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature test system from CTS GmbH, consisting of a conditioning unit model CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, development, and laboratory applications, such as automotive, electronics, component, and material testing. It enables precise temperature and climate simulation across an extremely wide operational range. This is a professional climate and temperature conditioning system by CTS GmbH, comprising: - Conditioning unit (CSR-60/810/S) - External test chamber (1200 L test chamber) Rodpfx Asya Ev Njgtot The system is designed to supply external test rooms or chambers with accurately regulated temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical data (from nameplate & manual): General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate: Temperature range: –60 °C to +170 °C Humidity range: 10% to 80% r.H. Dew point range: +5 °C to +74 °C Electrical Data: Nominal voltage: 400 V / 3-phase / N / PE / 50 Hz Nominal power: 39.6 kW Nominal current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System: Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection rating: Conditioning unit: IP54, Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg Test chamber 1200 L: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t For your safety as a buyer, the following information applies! The following work is carried out on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: Used Scope of delivery: (see image) (Specifications and technical data subject to change and errors excepted!) Please feel free to call us with any further questions.

Stanje: zelo dobro (rabljeno), CTS Redpfeup T Uqjx Agtjt Type: T-40/2000 Air-Cooled Temperature Test Chamber Technical Specifications: Refrigeration Unit: Air-cooled, low-noise, full hermetic design with stepless power adjustment via electronic monitoring and control system; environmentally friendly refrigerant R404A. Door: Fully openable, left-hinged door with one-hand operation, lockable. Shelf: Stainless steel, support surface 970 x 980 + 500 mm Load per shelf: max. 35 kg Total maximum load (all shelves): 100 kg Test Chamber Lighting: 3x halogen lamp 20 W, 12 V Control System: 32-bit controller LCD control panel Digital display of set and actual values Numeric input of setpoint values Plain text error messages RS 232 interface Free relay outputs for user-provided test item control Temperature Range: -40°C to +180°C Rated Voltage: 400V 3/N 50Hz Rated Power: 10.4 kW Rated Current: 17.2 A Compressor: TFH2516Z Cable port: nominal width 50 mm Control Panel Window: 570x710 mm Electrical connection, cable length: 5 m Technical Performance Data: Temperature Tests: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K (over time) Temperature change rate (acc. IEC 60068-3-5): Heating: 2.5 K/min Cooling: 1.5 K/min Heat Radiation: Approx. 2500 W at +20°C Approx. 2100 W at ±0°C Approx. 1500 W at -20°C Technical data specified for ambient temperature +25 °C, rated voltage 400V, without test samples, without radiant load, and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900 mm, Width 975 mm, Depth 2200 mm External dimensions: Height 1950 mm, Width 1290 mm, Depth 3145 mm Operating Data: Power supply: 400 V +6/-10%, 3/N, 50 Hz Rated Power: 17.2 kW Protection class: IP 22 Condensate drain: gravity flow, R 1/2" internal thread Sound pressure level (per DIN EN ISO 3744, measured 1 m in front): < 55 dB(A) Weight: approx. 1200 kg Important Safety Information for Buyers! The following actions are performed on all chambers we offer prior to sale: 1. Function check and replacement of necessary components 2. If needed, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (Refer to image) (Subject to change and error in technical data and specifications!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Including metal supports to increase floor load capacity. Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1050 mm, Depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Rodpfxjwfdnio Agtet Weight: 550 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) For further questions, please feel free to call us.

Stanje: rabljeno, Type: CS-70/900 CTS Climate Test Chamber with Humidity, Water-Cooled (converted to R-452a) Temperature range: -70 °C to +180 °C Humidity range: 10–98% RH Test chamber dimensions: Height approx. 870 mm / Width approx. 1000 mm / Depth approx. 1000 mm External dimensions: Height approx. 1950 mm / Width approx. 1200 mm / Depth approx. 2220 mm Control cabinet: Height approx. 2100 mm / Width approx. 800 mm / Depth approx. 400 mm Test chamber volume: 900 liters Refrigerants: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rjdpexb Dm Isfx Agtst Connected load: 21.2 kW, Rated current: 35.7 A Climate test chamber weight: 900 kg Control cabinet weight: 150 kg For your safety as a buyer, please note the following information! The following measures are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications may be subject to change and errors excepted!) If you have any further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), CTS Test Cabinet Climatic Chamber We offer a CTS climatic chamber for sale. Air-cooled Test chamber volume: 200 liters Test chamber dimensions: Height 750 mm, Width 650 mm, Depth 400 mm External dimensions: Height 1800 mm, Width 920 mm, Depth 1345 mm Temperature operating range: Temperature range: -40°C to +180°C Cooling rate: 4 K / min Heating rate: 4 K / min Max. heat load at +20°C: 3500 W Temperature constancy, over time: ≤± 0.3 K Rodpfxehwhzwj Agtst Climatic operating range: Temperature range: +10°C to +95°C Humidity range: +10% to +98% RH Connection: 400 V +6% -10%, 3/N, 50 Hz Rated current: 9.4 A Rated power: 4.8 kW Weight: approx. 450 kg Refrigerant: R404A Type: CTS C-40/200 The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), CTS Temperature Test Chamber T-55/1000 Li, Water-Cooled Temperature Range: -50°C to +100°C Rated Voltage: 400V 3/N 50Hz Rated Power: 9.5 kW Rated Current: 18 A Compressor: TFH2511Z / TFH2511Z, Refrigerants R404A/R23 The type designation of the CTS chamber series is structured as follows: e.g., Type T -55/1000/Li 1) T means: Temperature Rodpfx Aevba Raegtjt 2) -55 means: lower temperature limit -55°C 3) 1000 means: 1000 liters test chamber volume 4) Li means: special equipment for lithium-ion battery testing Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in clear text Ethernet interface RS 232 interface Free switching channels for external specimen control Test Chamber Lighting: Energy-efficient, high-intensity LED light strip mounted on the door Rack: Stainless steel, load surface 970 x 980 mm Maximum load per rack: 35 kg Total load with maximum rack assembly: 100 kg 1a Feedthrough NW50 1b Feedthrough 2x NW125 1c Feedthrough 2x Rp 3 1/4° for Minimax Technical Performance Data: Temperature Tests: Temperature range -50°C to +100°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Thermal Compensation: Approx. 4000 W at +20°C Approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without thermal compensation, and without additional equipment. Options may affect performance data. Dimensions: Test volume: 1000 liters Test chamber dimensions: Height approx. 1000 mm, Width approx. 860 mm, Depth approx. 1100 mm External dimensions: Height approx. 1950 mm, Width approx. 1270 mm, Depth approx. 1900 mm Operating Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated current: 18 A Rated power: 9.5 kW Protection class: IP 54 Sound pressure level: < 58 dB(A) (measured according to DIN EN ISO 3744 at 1 m front distance) Weight: approx. 1000 kg Heat dissipation to ambient: 10.4 kW Refrigeration Unit: Water-cooled, low-noise, fully hermetic overall stepless power adjustment via electronic monitoring and control system environmentally friendly refrigerants R404A/R23 For your safety as a buyer—the following will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new refill with legally compliant refrigerant 3. Leak testing with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical details are subject to change and errors!) We are happy to answer further questions by telephone.

Stanje: dober (rabljeno), CTS Model: TSR-30/1000 Water-cooled The CTS cabinet series type designation is composed as follows: Example: Type TSR-30/1000 1) T stands for: Temperature 2) S stands for: Stress Screening 3) R stands for: External Conditioning 4) -30 means: minimum temperature -30 °C 5) 1000 means: 1000 liters test chamber volume Technical specifications: A) TSR-30/1000 base unit without hose connections, i.e., when used as a standalone temperature test chamber Temperature Testing: Temperature range: -40°C to +180°C Final temperature: -45°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating: 6.0 K/min Cooling: 5.0 K/min Heat dissipation: approx. 5000 W at +20°C approx. 4200 W at ± 0°C approx. 3000 W at -20°C The technical data refer to ambient temperature of +25°C, rated voltage 400V, with no test samples, no heat dissipation, and no additional equipment. Air flow volume approx. 2000 m³/h B) TSR-30/1000 base unit with hose connections, for connection to a customer-supplied external test chamber Temperature Testing: Temperature range: -30°C to +170°C Temperature deviation: ≤ ±0.1 to 0.5 K over time Average temperature change rate, measured with closed-loop: Heating: 4.0 K/min Cooling: 4.0 K/min within the range from +150°C to -10°C Technical data based on ambient temperature of +25°C, rated voltage 400V, without test samples, no heat dissipation, and no additional equipment, measured with closed-loop. Note: The customer-supplied external test chamber must be completely sealed and properly insulated; any leadthroughs must be optimally sealed by the customer. Dimensions: Test volume: 1000 liters Air recirculation port: Ø 200 mm Test chamber dimensions: Height 900 mm, Width 1000 mm, Depth 1100 mm External dimensions: Height 1950 mm, Width 1270 mm, Depth 2245 mm Technical design: Refrigeration unit: Water-cooled, low-noise fully hermetic Infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Door: Fully openable door, hinge on the left, one-hand operation, lockable. Insert rack: Stainless steel, support surface 970 x 980 mm Maximum load per rack: 35 kg Maximum total load with full rack installation: 100 kg Test chamber lighting: Halogen lamp 20 W, 12 V Control: - 32-bit controller - LCD control panel Operating data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated power: 13.3 kW Redpfx Agerivfcstet Degree of protection: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 850 kg Your safety as buyer – the following is carried out on our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: Used Scope of supply: (see picture) (Specifications may change or contain errors. Subject to alteration!) If you have further questions, we would be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), CTS Type: C-40/60 CTS Compact Climate Chamber, Air-Cooled Test Volume: 60 liters Temperature Range: -40°C to +180°C Humidity Range: 10% to 98% relative humidity +10°C to +90°C within the temperature range +5°C to +89.5°C within the dew point range Dimensions (W x D x H): Redpou Hlb Eofx Agtjt Internal: 400 mm x 345 mm x 425 mm Enclosure: 560 mm x 845 mm x 1575 mm Refrigerant: R-404A Nominal Voltage: 230V 1/N 50 Hz Power: 3.3 kW Nominal Current: 13 A Important Information for Buyers – For your security: The following services are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful checks, the chamber undergoes a documented test run. Condition: used Scope of delivery: (see photo) (Specifications subject to change and error!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), CTS Climate Chamber / Climate Test Cell We are offering a CTS climate chamber / climate test cell. Available from mid-January 2023! Water-cooled Height-adjustable! Footprint approx. (W x D x H): 3755 x 3470 x 2480 mm Test room approx. (W x D x H): 2500 x 2720 x 2200 mm Test chamber volume: approx. 15 m³ Temperature range: -40°C to +140°C Temperature deviation: 1 K over time Average temperature change rate (without heat radiation, measured at supply air): Heating: 2 K/min Cooling: 1 K/min (from +110°C to -35°C) Climate tests: Rjdpfx Asip Dp Ssgtst Temperature range: +10°C to +90°C Humidity range: +30% to +95% RH In dew point range: +5°C to 89°C Temperature deviation: 0.5 K over time Humidity deviation: ±1–±3% RH over time Rated voltage: 400V 3/N, PE, 50 Hz Nominal power: 53.5 kW Rated current: 92.3 A Compressor: S6J-16.2 Includes chiller Refrigerant: R404A Weight: 5,500 kg Type: CW-40/16 Condition: used Scope of delivery: (see image) (Technical data and specifications are subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Stanje: dober (rabljeno), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Refrigerant: Converted to R-452A Controller: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for user-side specimen control Technical Performance Data Temperature Testing: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating: 2.5 K/min Cooling: 2.5 K/min Heat dissipation: Approx. 2500 W at +20°C Approx. 2500 W at 0°C Approx. 1800 W at -40°C Technical data based on ambient temperature of +25°C, rated voltage 400V, without specimen, without irradiation, and without additional equipment. Dimensions: Test volume: 600 liters Test chamber dimensions (H x W x D): approx. 850 mm x 850 mm x 830 mm External dimensions (H x W x D): approx. 1900 mm x 1120 mm x 1875 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerants: R-452A / R23 Weight: 700 kg Rsdpfjvitmdex Agtot Important safety information for buyers: The following procedures are performed on all chambers offered by us: 1. Functional check and replacement of necessary components 2. If necessary, recharge with legally compliant refrigerant 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Control System: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Plain text error messages - RS 232 interface Redsu U Ixmspfx Agtjt - Free switching channels for test specimen control by customer Technical Specifications Temperature Tests: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2500 W at 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test specimen, without irradiation and without extra equipment. Dimensions: Test volume: 600 liters Test chamber interior (HxWxD): approx. 850 mm × 850 mm × 830 mm Exterior dimensions (HxWxD): approx. 1900 mm × 1120 mm × 1875 mm Operating Data: Power supply: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg Important information for you as the buyer! The following steps are carried out on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data; all data provided without guarantee!) Please feel free to contact us by phone for any further questions.

Stanje: zelo dobro (rabljeno), CTS CTS Climate Test Chamber Type: C -40/600 Air-cooled (converted to R-452a) Test chamber volume: 600 liters Temperature tests: Temperature range: -40°C to +180°C Rjdpfx Agsw U Awmotst Temperature deviation: ±0.1 K / ±0.3 K over time (when equilibrated) Average rate of temperature change, without specimen and without heat input, Heating: 2.5 K/min Cooling: 3.0 K/min Maximum heat input: 2500 W at +20°C Climate tests: Climatic range / Technical data Temperature range: +10°C to +95°C Humidity range: 10% r.h. to 98% r.h. Dew point range I: +7°C to +94°C Dew point range II: –10°C to +7°C Stability values (over time): Humidity stability I: ±0.5% r.h. to ±1.5% r.h. Humidity stability II: ±1% r.h. to ±3% r.h. Temperature stability: ±0.1 K to ±0.3 K Test chamber dimensions (H x W x D), approx.: 850 mm x 850 mm x 830 mm External dimensions (H x W x D), approx.: 1900 mm x 1115 mm x 1850 mm Refrigerant: R-452A Electrical connection: 400V 3/N 50Hz Connected load: 8.2 kW, Rated current: 11.9 A Weight: 550 kg Important information for your security as a buyer! The following steps are carried out on our chambers prior to delivery: 1. Functional inspection and exchange of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Specifications and data subject to change and error!) If you have any further questions, we will be happy to answer them by phone.

Stanje: dober (rabljeno), Type: TS -70/1000-10 For sale: CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit, Compressor has been replaced! Equipment: • Multi-touch control system • USB and Ethernet interfaces Redexdi Ezopfx Agtot • Cable feedthroughs for test cables – 4 × Ø 125 mm • Safety temperature limiter Fields of application: • Environmental and endurance testing • Temperature cycling tests (stress screening) • Quality assurance and R&D • Electronics, automotive, material testing Test chamber volume: 1000 liters Test chamber dimensions: • Height: approx. 1000 mm • Width: approx. 860 mm • Depth: approx. 1100 mm External dimensions: • Height: approx. 1950 mm • Width: approx. 1270 mm • Depth: approx. 1900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) For any further questions, feel free to contact us by phone.

Stanje: rabljeno, CTS Model: TS -70/600-13 Water-cooled Temperature Test Chamber Series: TS -70/600-13 Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for external test specimen control Test chamber volume: 600 liters Internal chamber dimensions: Height approx. 730 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 2250 mm, Width approx. 1300 mm, Depth approx. 2475 mm Temperature range: -70 to +180°C Heating rate: 13 K/min from -40°C to +120°C Cooling rate: 13 K/min from +120°C to -40°C Temperature deviation: ± 0.1K over time, ± 0.5 K spatially Electrical connection: 400V / 3-phase / N / PE Rated power: approx. 27.8 kW Rated current: approx. 44.1 A Compressors: 4TC-8.2Y / 4PC-10.2Y Refrigerants: R-404A / R-23 Weight: 1350 kg For your security as a buyer, the following information: The following procedures are carried out on our offered chambers in advance: Redpfx Asvcyawsgtot 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we would be happy to answer them by phone.

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), CTS Model: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control: 32-bit controller LCD control panel Digital display of set and actual values Numeric entry of set values Clear-text error messages RS 232 interface Free switching channels for customer-side test specimen control Temperature tests: Rjdpfxjihb Ame Agtjt Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Heat radiation: approx. 1000 W at +20°C, approx. 200 W at -25°C Nitrogen inertization with residual oxygen monitoring: With nitrogen inertization, the test chamber is initially purged with a large amount of N₂ until the oxygen content drops below 3%. Then it switches to a base flow (approx. 10% of the full purging amount). The baseline nitrogen flow is measured with a flow meter, displayed, and monitored via a limit switch. O₂ monitoring continuously extracts gas from the test chamber via a flame arrestor and channels it over an O₂ sensor to monitor the residual oxygen content in the extracted air. After measurement, the gas passes through a second flame arrestor back into the test chamber. The exhaust pump is monitored by a flow meter. Further details can be found in the user manual by Dräger in the appendix. Note: The gas system is currently out of service! The technical data refer to an ambient temperature of +25°C, rated voltage of 400V, without test material, without radiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 21.6 kW Nominal current: 36.5 A Protection rating: IP 54 Condensate drain: non-pressurized R 1/2" female thread Sound pressure level:

Stanje: rabljeno, COMPLETE LINE FOR LOADING, CUTTING, DEBURRING AND UNLOADING, manufactured by RALC CTS CONNI OPTIONAL: AUTOMATIC ROBOTIC PACKAGING SYSTEM for square/hexagonal bundles, with outfeed carriage and safety zones Model RALC LYBRA 450 + RALC SDB 100 – 5000 - Cutting range: 40-140 mm - Bundle loader: 6,000 mm - 12,300 mm x 5 tons - Unloading: Up to 5,000 mm - Optional: Automatic robotic packaging system BUNDLE SPECIFICATIONS: Weight on loader: 5,000 kg Max. diameter: 600 mm Min. – max. tube entry length: 6,000 – 12,300 mm Maximum tube curvature at entry: 1.5 mm/m CUTTING Possible diameters with loader: - Round: 40 – 140 mm Rodpfevt Tzcex Agtet - Square: 40x40 – 135x135 mm - Rectangular: 50x25 – 200x80 mm Max. tube weight: 200 kg Feed speed: 10 - 60 m/min Saw blade diameter: 350-400-450 mm Disc clamping according to DIN 8576: 50/4/14/80 mm, 40/4/12/64 mm Max. tube length at output: 5,000 mm DEBURRING Deburring unit Dimensions: - Round diameter: 20 – 102 mm - Square dimensions: 30x30 – 70x70 mm - Rectangular dimensions: 40x20 – 80x50 mm Length: 500 – 5,000 mm Material: Stainless steel 37 according to DIN17100 Maximum tube curvature at deburring: 2 mm/m Brush diameter: 300 mm Brush width: 600 mm Steel wire diameter: 0.35 mm Power: 3x400/50 V/Hz MITER CUTTING Manual loading also enables MITER CUTTING. Cutting capacity (without loader) Round tube: - At 90º: 100 – 125 – 145 mm - At 45º: 90 – 115 – 135 mm - At 30º: 80 – 95 – 110 mm Square: - At 90º: 90 – 110 – 130 mm - At 45º: 80 – 100 – 110 mm - At 30º: 70 – 80 – 90 mm Rectangle: - At 90º: 140x70 – 160x90 – 180x110 mm - At 45º: 110x60 – 130x70 – 150x70 mm - At 30º: 80x40 – 100x50 – 110x60 mm SCOPE OF DELIVERY 1. Loader Mod. CM5FT12 for bundles of 5,000 kg and lengths from 5,000 to 12,300 mm 2. Cutting unit Mod. LYBRA C450 with: - Microlubrication - Air blow-off - Chip conveyor - Tilting carriage - Unloading grip 3. Deburring unit Mod. SDB100 5000 4. Outfeed cradle with endless slings 5. Complete electrical and hydraulic systems 6. Existing documentation * 7. Existing spare parts * *To be verified before order placement. OPTION: Automatic front pick-up portal with robot, capable of packaging round, square or rectangular tubes in hexagonal or square bundles Cutting range: 40 - 140 mm Bundle loader: 6,000 mm - 12,300 mm x 5 tons Unloading: Up to 5,000 mm Optional: Automatic robotic packaging system Bundle weight on loader: 5,000 kg Maximum bundle diameter: 600 mm Tube length at entry: 6,000 – 12,300 mm Tube curvature at entry: Max. 1.5 mm/m CUTTING Possible diameters with loader, round: 40 - 140 mm CUTTING Possible dimensions with loader, square: 40x40 – 135x135 mm CUTTING Possible dimensions with loader, rectangles: 50x25 – 200x80 mm Tube weight: Maximum 200 kg Feed speed: 10-60 m/min Saw blade diameter: 350 - 400 - 450 mm Tube length at output: Max. 5,000 mm DEBURRING Round diameters: 20 – 102 mm DEBURRING Square dimensions: 30x30 – 70x70 mm DEBURRING Rectangular dimensions: 40x20 – 80x50 mm Length: 500 – 5,000 mm Material: Steel 37 according to DIN17100 Maximum tube curvature at deburring: 2 mm/m Brush diameter: 300 mm Brush width: 600 mm Steel wire diameter: 0.35 mm

Leto izdelave: 2002, obratovalne ure: 74.500 h, stanje: pripravljen za uporabo (rabljen), potovalna razdalja osi X: 450 mm, število osi: 3, Esta máquina rectificadora cilíndrica interior CNC Combitec CT-450 de 3 ejes fue fabricada en el año 2002. Se distingue por su construcción robusta e incorpora un sistema de aspiración y un sistema de extinción de incendios integrados. Con aproximadamente 74.500 horas de funcionamiento, esta máquina presenta signos de desgaste en las guías debido a la edad. Si está buscando una rectificadora cilíndrica interior de alta calidad, debería considerar la máquina Combitec CT-450 que ofrecemos en venta. Contáctenos para más detalles. • Tipo de máquina: rectificadora cilíndrica interior CNC • Husillos: 1 • Voltaje: 400 V • Frecuencia: 50 Hz • Horas de funcionamiento: aprox. 74.500 h • Estado: Desgaste de guías acorde a la edad • Sistema de refrigeración: No incluido Rjdpfsy E Sphjx Agtst Equipamiento adicional • Sistema de aspiración • Sistema de extinción de incendios

Stanje: dober (rabljeno), Leto izdelave: 2000, For sale is a used carton sealing machine (tape sealer) from the brand Cyklop. The machine is ideally suited for the automatic sealing of cartons with tape (top & bottom) and can be easily integrated into existing packaging lines. Typical applications: * Shipping / Logistics * Warehousing & Fulfillment * Production / Packaging lines ⸻ ⚙️ Technical information * Suitable for tape width approx. 50 mm * Carton sizes can be variably adjusted (width & height) * Conveyor belt integrated * Robust industrial design * Suitable for continuous operation 👉 Comparable models operate at approx. 20–23 m/min conveyor speed with newer variants Redpfsy Hf Slsx Agtot ⸻ 📦 Condition * Used, in age-appropriate condition * See pictures for visual condition * Function: (insert status here: running / untested / tested) ⸻ 📐 Advantages ✔ Fast and clean sealing of cartons ✔ Time-saving compared to manual work ✔ Ideal for medium to high volumes ✔ Proven Cyklop industrial quality

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, vrsta goriva: dizel, barva: rumena, obratovalna teža: 2.927 kg, Leto izdelave: 2026, obratovalne ure: 300 h, Oprema: dodatne luči, gumene gosenice, kabina, klimatska naprava, JCB 8029 CTS Leto 2021, 300 delovnih ur, delovna teža 2927 kg. !!! AKCIJSKA CENA VELJA DO 30.04.2026 !!! Rjdpoyy U Sbsfx Agtot Kompaktni mini bagger z zaprto kabino, klimatsko napravo in ogrevanjem, upravljanje z joystickom, gumijaste gosenice. Sprednja izravnalna rezila, hitra zamenjava priključkov, dodatne cevi za hidravlično kladivo, 1 nagibna jarkovna žlica s hidravličnim cilindrom, 2 izkopni žlici. PERKINS motor z 24 KM. MASON TRUCKS Via Vicenza, 31 Vedelago (Treviso)

Stanje: novo, Leto izdelave: 2026, TEHNIČNE SPECIFIKACIJE Redpfx Agoiyyypjtst ZOPO V10-B Pomik po X-osi: 1.000 mm Pomik po Y-osi: 620 mm Pomik po Z-osi: 630 mm Razdalja med konico vretena in mizo: 120 ~ 750 mm T-utorji: 5 x 18 mm Razdalja med T-utorji: 100 mm Dimenzije delovne površine mize: 1.200 x 600 mm Največja nosilnost mize: 800 kg Stožec vretena: BT 40 Moč glavnega motorja vretena (30 min./kontinuirano): 15/11 kW Navor glavnega vretena S1 - 52,5 Nm / S2 - 95,5 Nm / S3 - 118 Nm Prenos moči vretena: Direktni pogon Največja hitrost vretena: 12.000 min⁻¹ (vrt./min) SPECIFIKACIJE OSI X, Y, Z Hitri pomik po X/Y osi: 36 m/min Hitri pomik po Z-osi: 32 m/min Največji posamični pomik osi X/Y/Z: 10.000 mm/min Moč motorja osi X/Y (Navor): 3 kW (20 Nm) Moč motorja osi Z (Navor): 3 kW (36 Nm) MENJALNIK ORODIJ (ATC – avtomatska menjava orodij) Tip zalogovnika orodij: Z roko Kapaciteta zalogovnika orodij: 24 Tip vpenjala orodja: BT 40 Čas menjave orodja: 2,5 sek. NATANČNOST Natančnost pozicioniranja X/Y/Z: ± 0,008 mm Ponavljivost X/Y/Z: ± 0,005 mm DIMENZIJE STROJA Dolžina x širina: 2.850 x 2.450 mm Višina: 2.850 mm Teža: 6.800 kg DODATNA OPREMA VKLJUČENA V CENO Krmilnik Fanuc 0i-MF z 10,4˝ barvnim LCD zaslonom Vreteno z direktnim pogonom (Direct Drive), motor 11/7,5 kW in največja hitrost 12.000 vrt./min Sočasno krmiljenje 3 osi Linearne vodila z valji na oseh X, Y, Z (45 mm) Zalogovnik orodij z roko, 24 mest Hladilna enota s posodo Sistem za hlajenje vretena z oljem Sistem izpihovanja vretena Zračna pištola Sistem za ločevanje olja od hladilne tekočine (Oil Skimmer) Transporter za ostružke s členkasto verigo Zaprt elektro omarica s klimatsko napravo Vmesniki za komunikacijo programov in podatkov: RS 232 vmesnik, CF kartica in USB Avtomatski izklop M30 Transformator Centralizirano avtomatsko mazanje Togo rezkanje navojev (Rigid tapping) Vgrajena LED delovna svetilka x2 LED opozorilna svetilka v 3 barvah MPG (ročni inkrementalni oddaljeni upravljalec) z žico Vijaki in podstavki za nivelacijo stroja Škatla z orodji + orodja Navodila za uporabo in seznam rezervnih delov Teleskopske zaščite za vse 3 osi Popolnoma zaprto delovno območje s samozapiralnimi vrati CE certifikat 2 leti garancije na krmilnik 1 leto na stroj Cena je EXW (Evropska zaloga), vključno z nakladanjem na tovornjak. Prevoz, montaža, zagon, usposabljanje in letne servisne pogodbe so na voljo na zahtevo za doplačilo. Montažo in usposabljanje vedno izvaja naša visoko usposobljena servisna ekipa na 3 lokacijah v Evropi: Nizozemska, Nemčija, Romunija. Uradni zastopnik: CNC Top Ten bv Coevorden, Nizozemska

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Stroj za kaljenje stekla za debeline od 3,8 do 19 mm. Največje dimenzije stekla: 2440 x 4500 mm. Redpfxex Trg Ae Agtjt

Leto izdelave: 2025, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Cedima rezalni stroj/namizna žaga CTS 56 — letnik 2025 Rabljeno iz profesionalnega najemnega parka podjetja Kurt König Baumaschinen GmbH, Einbeck. Idealen delovni stroj za vsakodnevno uporabo, za hitro in natančno rezanje ploščic, naravnega kamna in betona. Rsdpjy A Hdnofx Agtst Tehnični podatki: Teža: 72 kg | Maks. globina reza: 130 mm | Dolžina reza: 600 mm | Rezilna plošča: Ø 400 mm Stanje & opombe: - Stanje: rabljeno iz najema, redno vzdrževano - Funkcija: popolnoma delujoče - Slike izdelka so vzorčne slike in prikazujejo stroj v novem stanju — dejansko stanje se razlikuje glede na obdobje uporabe - Ogled možen v 37574 Einbeck po dogovoru Cena 790 EUR + DDV | EXW Einbeck | Dostava po dogovoru

Leto izdelave: 2025, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Cedima rezalni stroj/mizna žaga CTS 375.3 — letnik 2025 Rabljena iz profesionalnega najemnega parka Kurt König Baumaschinen GmbH, Einbeck. Stanje in informacije: - Stanje: Rabljena iz najema, redno vzdrževana Rjdjy A E Ryspfx Agtjt - Delovanje: Popolnoma delujoča - Slike izdelka sledijo — za aktualne fotografije nas kontaktirajte - Ogled v 37574 Einbeck po predhodnem dogovoru Cena 2.950 EUR + DDV | EXW Einbeck | Dostava po dogovoru

Leto izdelave: 2023, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Norton Betonglättmaschine CT 901 HP — Letnik 2023 Rabljeno iz profesionalnega najemnega parka podjetja Kurt König Baumaschinen GmbH, Einbeck. Stanje in informacije: - Stanje: Rabljeno iz najema, redno vzdrževano - Delovanje: Popolnoma delujoče - Fotografije izdelka sledijo — v primeru zanimanja nas kontaktirajte za aktualne slike Rodpfx Aoy A E N Nogtjt - Ogled možen v 37574 Einbeck po dogovoru Cena 3.250 EUR + DDV | EXW Einbeck | Dostava po dogovoru