Stanje: rabljeno, Leto izdelave: 2022, Obdelovalni center za izdelavo lesenih zamaškov za steklenice alkohola 5 orodij Iedpfx Aeyvtwbjdkjtd Zaslon na dotik Proizvodnja približno 2000 kosov/uro Letnik 2022 Zelo malo uporabljen Kupljen leta 2023 po ceni ± 80.000 €

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, maks. dolžina obdelovanca: neomejena maks. širina obdelovanca: 990 mm Debelina plošče: 10 - 60 mm Vrtalna glava: 20 vreten (12 vertikalnih + 8 horizontalnih) Rezkalna enota: 6-stopenjski menjalec Isdpfxeyl Tibj Adkotd Menjalec orodij: 6-stopenjski menjalec orodij Agregati: 16-vretena vrtalna glava Dimenzije (DxŠxV): 2200 mm x 1600 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Delovna površina 2.893 x 950 mm 6 prečk z 12 priseski Rezkalni vreteno z držalom orodja ISO 30, 3,6 kW, avtomatska vrtalna enota: 10 vertikalnih svedrov 6 horizontalnih svedrov Žaga za utore, Menjalnik orodij s 6 pozicijami. Krmilna enota N500 Barvni zaslon Itedpfsymmr Eex Adked Skupna priključna moč 10 kW 400 V, 50 Hz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Axis 920 mm x-axis 3000 mm Material thickness Z 12 mm - 30 mm Feed rate 20 m/min A-axis 360 degrees Minimum Dimensions: Sheet: x = 300 mm y = 120 mm z = 12 mm Itodpfx Aofmdcqjdked The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade operates in the X direction Max. depth with saw blade: 10 mm Motor 0.75 HP, 400 Volt Required extraction capacity: 2300 m3/h Location: arriving at warehouse 54634 Bitburg - immediately available -

Stanje: rabljeno, Leto izdelave: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced across the entire machine bed with welded components, ensuring extreme stability. The large-base table design is the secret to guaranteeing long-term precision and stability. The machine’s layout allows the operator optimal workflow with minimal space requirements. The moving gantry carrier is built from a solid monoblock. It is positioned in the X-direction on prismatic ground guides with recirculating ball carriages. The working unit is mounted on this mobile aggregate carrier, also using prismatic ground guides and recirculating ball carriages. AXIS MOVEMENT All axes move on large-section prism linear guides and recirculating ball carriages with a large contact area, ensuring optimal gliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved via slanted-tooth rack-and-pinion drive. Large-cross-section recirculating ball screws guarantee the precise positioning of the working unit along the moving gantry (Y- and Z-axes). Top-quality drives and brushless motors govern perfect mechanical dynamics and maximum positioning accuracy. Maximum axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are installed around the mobile support, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation, without the access restrictions typical with foot mat systems. This prevents unwanted interruptions of the machining cycle and allows greater freedom of movement around the work table. CE certificate for the safety system 1 Safety guard fence 1 Side and rear protective fencing Automatic central lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is regulated by the CNC control at regular intervals, without manual intervention on the machine. Central extraction port 1 All individual extraction ports of the processing units are combined into a central port. Various slide gates within the port are controlled via NC, reducing the required extraction air flow. Chip conveyor 1 Maxi - 5 axis electrospindle 11 kW HSK-63 "Prisma K 1 5-axis electrospindle rated for 11 kW at 20,000 rpm in S1 (100% ED) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Tool interface HSK 63F 18 kW inverter, stepless, constant power output Max. rotation: Itsdpfx Aoxy Tmnjdkjd B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, complex horizontal positioning in limited working areas is possible. This enables the machining of complex geometries without the risk of collisions.

Stanje: rabljeno, Leto izdelave: 2016, Delovno polje: X=3300 mm Y=1280 mm Z=150 mm Višina prehoda Upravljalni terminal: 24" barvni LED zaslon Ročni terminal za upravljanje hitrosti osi Programska oprema: "Woodflash" Vakuumska črpalka 90 m³/h/50 Hz oziroma 108 m³/h/60 Hz Rezkalno vreteno 12 kW HSK F63 (12.000 vrt./min) 12-pozicijski linearni menjalec orodja na levi strani stroja + pick-up prostor Vrtalna glava DH 16 4H 2S: 12 navpičnih vreten 4 vodoravna vretena 2 utorni žagi Lokacija skladišča: Nattheim Iedpexy Tlwofx Adkotd

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: 26010808, Funkcionalnost: popolnoma funkcionalen, Used machine Year of manufacture: 2008 Condition: Currently still in production Equipment and technical data: CNC control: Siemens 840 D Max. travel distances of the controlled axes: X = 1800 mm Y = 6590 mm Z = 460 mm A = ±90 degrees C = ±270 degrees HSD milling unit with 10 kW, liquid-cooled Infinitely variable spindle speed up to 24,000 rpm Permanent grease lubrication Tool holder HSK 63F 1 multi-spindle drilling unit with pneumatic pre-stroke, mounted on the milling unit 16 individually selectable vertical drilling spindles 1 horizontal double drilling spindle in X direction and 1 in Y direction Drill holders each 10 mm diameter Note: Workpieces that can be machined with the drilling unit = 900 mm with X/Y reference spindle Milling unit and drilling unit with 200 mm extraction port, each with pneumatic shut-off flap, joined for connection to customer’s extraction system, diameter 300 mm Itedpfx Aoyr Nwnsdked Tool changer: 1 drum-type tool magazine for 5-axis milling unit, 20 positions for tools of 90 mm diameter or max. 160 mm with sorted placement, max. tool length 160 mm. One saw blade of up to 300 mm diameter can be stored and changed in, but occupies 3 slots. Special tool lengths up to max. 180 mm are possible with corresponding restriction of working area. Max. tool weight 6 kg (incl. HSK holder). Total magazine weight approx. 60 kg. Magazine positioned at aggregate output position. Machine table: 8 support traverses, manually adjustable along the machine length, each traverse with 1 lowerable workpiece stop, fixed facing the operator. Division of table area into two clamping situations, each station with: - 1 length stop, pneumatically raise/lower - 2 pneumatically raise/lower guide rails - 1 vacuum clamping circuit Workpiece positioning: 1 Maka laser system Workpiece clamping: 1 vacuum pump 128 m³/h, dry-running, with 250-litre intermediate tank. 16 vacuum suction cups, 110 mm diameter Vacuum cup set for stair production incl. sensing valve. 1 clamping fixture for posts/curved segments Incl. chip conveyor Incl. NC-Hops 5, Wop system Incl. bumper guard at front and lateral and rear fence Central lubrication Rated power: 21 kW Fuse: 63 A Availability: approx. March 2026 Location: Westerwald

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 28.535 h, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.580 mm, pomik po osi Z: 800 mm, število osi: 5, število mest v zalogovniku orodij: 14, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: ITNC 530, moč vretenovega motorja: 10.000 W, Dodatna oprema • Merilna tipala za merilna orodja TT140 • Tipalni sistem za obdelovanec TS 640 (oddajnik, sprejemnik) • Krmilna omara z digitalno klimatsko napravo • Ročna upravljalna naprava HR 520 Isdpfxsyr D S He Adketd • MP 3011S 2-osna vilicasta glava z vijačno vreteno • Meglena hladilna naprava (nameščena leta 2020) Prednosti stroja Kvalitativne prednosti stroja • Redno vzdrževan in v zelo dobrem tehničnem stanju • Visoka natančnost z orodnimi in obdelovalnimi tipali Tehnične prednosti stroja • Miza: plošča z M10 navojem v mreži 100x100 mm • Veliki hodi za vsestransko obdelavo • Sodobni krmilni sistem Heidenhain iTNC 530 za natančne delovne procese Dodatne informacije Stroj je še vedno priključen na elektriko

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Ponujamo v prodajo zelo dobro ohranjeno CNC obdelovalno središče HOLZ-HER EASY-MASTER 7018K. Itjdpfxsyc Ulls Adkjd Stroj je pregledan, redno servisiran in pripravljen za takojšnjo uporabo. 🔧 Oprema in prednosti stroja: • Zmogljivo glavno rezkalno vreteno 6,5 kW (HSK 63 F) • Vrtalna enota: - 10 navpičnih vreten za vrtanje v površino - 4 vodoravna vretena za vrtanje v robove (2× os X, 2× os Y) • Utornik s krožno žago • Močna vakuumska črpalka BECKER • Magacin za orodje: 8 pozicij + spomin za 6 orodij izven stroja • Pregleden kontrolni pult, daljinsko upravljanje • Intuitivna programska oprema za vodenje CAMPUS • Set vakuumskih priseskov + Bonus – vrtljive priseske ⚙️ Konstrukcija • Visokonatančna zaprta linearna vodila, zaščitena pred prahom in umazanijo • Dolgoročno stabilna natančnost, visoka togost in dolga življenjska doba 📦 Na voljo takoj

Stanje: rabljeno, Leto izdelave: 2005, Delovno območje: X=2970 mm / Y=1725 mm. Hitrosti pomika osi: X=60, Y=45, Z=25 m/min. Teža: 3200 kg. Lokacija skladišča: Nattheim. Itsdpfx Ajw Dcccjdked

Stanje: rabljeno, Leto izdelave: 2007, Pomik osi: X=4400 mm, Y=2195 mm, Z=440 mm Delovno polje v X=3650 mm, Y=1560 mm Prehodnost: 330 mm Elektrovreteno SCM Power 2000 Visokohitrostno rezkalno vreteno z močjo 13 kW Rotacijska os Vector (C-os) Ventilator za čiščenje orodja na rezkalni enoti Vpenjanje orodja HSK 63 F Hitrost vrtenja 600 – 24.000 1/min brezstopenjsko preko inverterja Moč motorja 8,5 kW Nosilci orodja: 6 kos Menjalnik orodja: Rapid 12 (12 mest) Vakuumska črpalka 250 m³/h / 5,5 kW Maks. vakuum: 0,9 bar Referenčni prisloni na straneh mize Vrtalni agregat z 11 vreteni (7 vertikalnih / 4 horizontalni) Krmiljenje: NUM serija 1000 Uporabniški vmesnik: XILOG Plus PC Office Hardware WINDOWS XP Professional Skupna priključna moč: max. 27,5 kW Teža: 5200 kg Skladišče: Nattheim Itjdjw Dcb Sepfx Adksd

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 8800 x 2900 x 2100 mm Weight: 6,500 kg Total connected load: 18–36 kW CNC Machining Center ROUTERMAX NESTING 2130 DELUXE - Travel range X-axis: 2,900 mm - Travel range Y-axis: 2,160 mm - Travel range Z-axis: 200 mm - Working area X-axis: 2,850 mm - Working area Y-axis: 2,130 mm - Working area Z-axis: 70 mm - Loading/unloading speed: 15 m/min Itodpfjv A Hcrox Adked - Milling spindle, air-cooled, HSD/Italy 9.6 kW HSK 63 (option: 11 kW HSK 63F) - Spindle speed, stepless: 24,000 rpm - Tool changer, 8-position rotary carousel, traversing - Drilling unit VERTICAL 5 + 4 FAM/Italian - 5 spindles in Y-direction, pitch 32 mm - 5 spindles in X-direction, pitch 32 mm - Traverse system (X & Y axes): rack-and-pinion drive - Traverse system (Z axis): ball screw - Traverse motors: AC servo motors YASKAWA - High-precision THK linear guides with long-life lubrication units in X, Y, Z axes - SHIMPO gear drive - Max. traverse speed: 80 m/min - Max. working speed: 25 m/min - Working accuracy: 0.05 mm - Vacuum grid table with 4 sections - BECKER dry-running vacuum pumps, air-cooled, 2 x 129 m³/h = 258 m³/h - Workpiece positioning via pneumatically retractable stops, 2 each in X and Y - Tool length sensor - CAD/CAM software: EXICAM - Control: OSAY - Interface: Ethernet/USB/CompactFlash Card - Safety light barrier as per EN 848-3 (optional, depending on installation conditions on site) - Loading via hydraulic scissor lift table The workpiece is secured by vacuum suction cups mounted on the gantry and is pulled from the scissor lift table into the machine. After nesting, the material is pushed onto the discharge conveyor of the offloading table by a pusher. - Electrical connection: 3-phase, 400 V, 50 Hz - Operating ambient temperature: 0–45°C - Width: approx. 2,900 mm - Length: approx. 8,800 mm - Total weight: approx. 6,500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Used 5-axis CNC machining center Manufacturer: Homag Model: PROFI BMG 511/40/15/F/K Year of manufacture: 2013 5-axis spindle, 15 kW, Drive5C+ MPU drilling head with 30 spindles, 360° Drill spindles vertical: 20 Drill spindles horizontal: 10 Additional milling spindle: 6 kW Speed Pack 18-slot rotary tool changer, D=130, bottom-mounted PickUP station for saw blade 350 mm Tool transfer station Workpiece length: All aggregates: single 4000 mm, pendulum 2250 mm, min. 500 mm Tool diam. 25 mm: single 4175 mm, pendulum 2250 mm, min. 500 mm Workpiece width: Rear stop: 1900 mm Front stop, all aggregates: 1450 mm, tool diam. 25 mm: 1675 mm – Workpiece thickness: – Max. 300 mm including clamping devices – Up to max. 60 mm with standard clamps Console table with 10 movable consoles, each with 2 suction cups, side and longitudinal stops, LED position indicator for vacuum cups (14x) for panel overhang; 10 extraction rails, connection for Power-Clamp, vacuum connection for templates SAFETY AND PROTECTIVE DEVICES: EU conformity; SAFETY FENCING ON THE RIGHT WITH DOOR Support equipment: DRILLING HEAD 30 SPINDLES: V20 / H10 / S360° "MPU" 10 HORIZONTAL SPINDLES GROOVE AND CUT-OFF SAW ADDITIONAL MILLING SPINDLE 6 kW FOR MPU DRILLING HEAD DRILL/MILLING UNIT 4-SPINDLES FOR TOOL CHANGER MACHINING SPINDLE 15 kW DRIVE5C+ AGGREGATE INTERFACE DRIVE5C+ MEASURING PROBE FOR TOOL CHANGER Itsdpfxjym Am Ss Adkod SOFTWARE FOR POSITION MEASUREMENT CNC COORDINATE ROTATION TOOL TRANSFER STATION 18-SLOT ROTARY TOOL CHANGER D=130 BOTTOM PICKUP STATION FOR SAW BLADE 350 MM FOR DRIVE5(C)+ COOLANT TANK FOR MACHINING SPINDLE VACUUM PUMP 300/360 M3/H Control system: POWERCONTROL PC85 with POWERTOUCH control system; IPC POWERPACK, OPERATOR COLUMN FOR PROGRAM START; CAMERA SYSTEM WITH TABLET PC WOODWOP CAD/CAM INTERFACE STANDARD DOCUMENTATION AND CONTROL TEXTS: GERMAN Delivery includes only the tools and HSK toolholders shown!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, moč: 23,5 kW (31,95 KM), potovalna razdalja osi X: 3.850 mm, pomik osi Y: 2.015 mm, skupna dolžina: 6.580 mm, skupna širina: 4.560 mm, skupna masa: 6.500 kg, za izdelavo pohištvenih delov iz lesa ali lesu podobnih materialov. Itodpfsyufd Ajx Adked Delovno polje X 3250 Y 2025 Z 150 Obdelava z izmeničnim poljem Nihajna obdelava Naprava za transport odrezkov 3250 mm, 1 x desno, izmet desno V okvir stroja integrirana naprava za transport odrezkov. Smer izmeta: desno HSK 63 HIGH Performance ohišje za ključavnico, 1 x desno, 2 vretena Za samodejno menjavo v glavno vreteno. HSK63 rezkalna enota, 4 vretena, križna glava Flex-5 žagalni, rezkalni in vrtalni agregat za ATC -za samodejno menjavo v glavno vreteno -za žaganje, rezkanje ali vrtanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, število osi: 3, Glavni pogon Število osi: 3 Ta 3-osni CNC obdelovalni center Weeke Optimat BHP Vantage 24M je bil izdelan leta 2011. Robustni CNC obdelovalni center ponuja natančnost in učinkovitost za raznolike obdelovalne naloge. Razmislite o nakupu tega CNC obdelovalnega centra Weeke Optimat BHP Vantage 24M. Kontaktirajte nas za več informacij. Itedpfex D D Ttjx Adksd Vrste uporabe CNC obdelava lesa

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), Ta 4-osni HOMAG PROFI BMG 511/60/12/R je bil izdelan leta 2015. Gre za robusten CNC obdelovalni center z 18-pozicijskim menjavalcem orodij, vrtalno glavo s 30 vreteni in dinamično razporeditvijo delovne mize. Opremljen je z glavnim rezkalnim vretenom moči 12 kW in hitrostnim razponom do 24.000 vrt./min. Idealen je za zahtevna lesarska dela zaradi velikega delovnega območja 6.000 x 1.550 mm. Za več informacij o stroju nas kontaktirajte. Isdjx D Ra Hspfx Adketd Vrste uporabe CNC obdelava lesa

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), Ta 4-osni stroj HOMAG PROFI BMG 512/40/12/V/A je bil izdelan leta 2016 in je opremljen z lepilno enoto POWEREDGE ter štirikratnim magazinom robnih trakov. Stroj vključuje 18-pozicijski diskovni menjalnik orodij, 12 kW obdelovalno vreteno ter C-os z neomejenim obsegom vrtenja. Podpira obdelavo kosov dolžine do 4000 mm in debeline do 300 mm. Idealen je za napredno obdelavo lesa ter omogoča dinamično razporeditev prostora za optimalen izkoristek delovne površine. Kontaktirajte nas za več informacij o tem stroju. Isdpjx D Nzvefx Adkotd Vrste uporabe CNC obdelava lesa

Leto izdelave: 2024, stanje: pripravljen za uporabo (rabljen), Glavni pogon Število osi: 4 Moč vretena: 9 kW Gibanje Gibanje osi X: 2100 mm Gibanje osi Z: 400 mm Ijdpfxjx E Efvo Adketd Gibanje osi Y: 3050 mm Ta 4-osni QUICK CNC UA 481 je bil izdelan leta 2024. Opremljen je z delovnim območjem 2100 x 3050 x 400 mm, vretenom HSD/HSK F 63 z močjo 9 kW in dvoplastno vakuumsko mizo s 6 conami. Opremljen z Yaskawa servo motorjem in dvema Becker črpalkama po 250 m3/h, je idealen za napredno obdelavo lesa. Razmislite o nakupu tega CNC stroja QUICK CNC UA 481 za obdelavo lesa. Kontaktirajte nas za več informacij o tem stroju. Področja uporabe CNC obdelava lesa

Leto izdelave: 2025, stanje: pripravljen za uporabo (rabljen), Glavni pogon Hitrost vretena: 24.000 vrt/min Moč motorja vretena: 9 kW Število osi: 3 Ta 3-osni QUICK CNC UE-481PL je bil izdelan leta 2025. Opremljen je z robustno težko osnovo, veliko delovno površino 2100 x 3050 x 200 mm in 9 kW HSD rezkalnim vretenom, sposobnim dosegati 24.000 vrtljajev na minuto. Dodatni poudarki vključujejo 12-pozicijski linearni menjalec, dvojno Becker vakuumsko črpalko 250 m³/h ter brezžično krmilno ploščo. Če iščete vrhunske CNC obdelovalne zmogljivosti, razmislite o QUICK CNC UE-481PL, ki je na voljo pri nas. Kontaktirajte nas za več informacij. Itodpsx D Dnwjfx Adked Vrste uporabe: CNC obdelava lesa

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), Glavni pogon Število osi: 4 Ta HOMAG Optimat BAZ41/30/K Event je bil izdelan leta 2002. Rabljeni CNC-obdelovalni center z delovnim območjem 3000 x 1050 mm. Razmislite o nakupu tega CNC-obdelovalnega centra HOMAG Optimat BAZ41/30/K Event. Kontaktirajte nas za več informacij. Itodpox D Dvnsfx Adkjd Vrste uporabe CNC obdelava lesa

Stanje: rabljeno, številka stroja/vozila: 008388, Delovno območje os X: 3086 mm Delovno območje os Y: 2185 mm Delovna površina: nestinška miza Moč glavnega vretena: 15 kW Število krmiljenih osi: 4 osi Število vrtalnih glav: 18 Iodpfxoyngzvo Adkstd Število mest za orodje: 20

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.670 mm, pomik po osi Z: 500 mm, število osi: 4, moč vretenovega motorja: 12.000 W, največja hitrost vretena: 24.000 obr/min, This FORMAT4 Profit H200 13.33 4-axis machining center was manufactured in 2019. It features a CNC gantry machining center with a working area of 4000 mm on the X-axis and 1670 mm on the Y-axis. The machine is equipped with a 12 kW electrospindle and a tool magazine with 12 positions. If you are looking for a high-quality woodworking machine, you should consider the FORMAT4 Profit H200 13.33 we have for sale. Contact us for further details. • Working Area (maximum panel size) • X: 3300 mm • Y: 1280 mm • Z clearance: 250 mm • Spindle: • Tool interface: HSK F63 • Rated power at: approx. 12,000 rpm • Cooling: Air-cooled • Rotation: CW / CCW • Tool Magazine • Linear tool magazine (side-mounted): 12 positions • Additional linear magazine on gantry: 4 positions • Max. tool diameter: 250 mm • Max. tool length: 300 mm • Drilling Unit • Model: DH 24 6H 2S • Vertical spindles: 18 (12 in X, 6 in Y) • Horizontal spindles: 6 (4 in X, 2 in Y) • Max. drill length: 70 mm • Max. tool diameter: 10 mm • Grooving saw units: 2 (X and Y) • Max. saw blade diameter: 120 mm Itedsyi U Elepfx Adked • Max. speed: 6,000 rpm • Vacuum Table • 6 consoles (instead of 4) • Dual-circuit vacuum system • Vacuum cup height: 100 mm • Pneumatic console locking • Adjustable side stops (Y-axis) • Axis System • X-axis: Rack and pinion drive • Y/Z-axis: Ball screw drive • Linear guides on all axes • Automatic central lubrication • Control and Software • CNC control with CAD/CAM software • 3D simulation preview • DXF import capability • Parametric programming • Remote maintenance package (internet-enabled)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, potovalna razdalja osi X: 5.540 mm, pomik osi Y: 1.570 mm, pomik po osi Z: 350 mm, število osi: 5, Ta 5-osni CNC stroj FORMAT4 Profit H500S 16.56 je bil izdelan leta 2016. Odlikuje jo velik delovni razpon z merami X = 5540 mm, Y = 1570 mm, Z = 350 mm in je opremljena s 5-osno glavno vreteno. Stroj vključuje vrtalno glavo z 12 navpičnimi in 6 vodoravnimi vrtalnimi vreteni, utorno žago in motor, krmiljen z inverterjem, s hitrostjo do 7.500 min⁻¹. Poleg tega ima dva menjalnika orodij in Becker vakuumsko črpalko. Za dodatne informacije o stroju nas kontaktirajte. • Vrtalna glava: • 12 navpičnih vreten, 32 mm razmak • 6 vodoravnih vreten, 32-mm razmak (4 v X osi, 2 v Y osi) • Utorna žaga v smeri osi X • Motor krmiljen z inverterjem do 7.500 min⁻¹ • Menjalnik orodij: 2 • Opomba: Tehnični podatki in opisi so kopije iz potrditve naročila. Podatki so namenjeni le za informacijo in niso zavezujoči. Isdpfxjygwxvj Adkjtd Dodatna oprema • 1 Becker vakuumska črpalka

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, potovalna razdalja osi X: 4.100 mm, pomik osi Y: 1.560 mm, pomik po osi Z: 320 mm, število osi: 3, moč vretenovega motorja: 12.000 W, Esta HOLZHER dynestic 7507 de 3 ejes fue fabricada en 2017. Dispone de un recorrido en el eje X de 3100 mm o 4100 mm, recorrido en el eje Y de 1560 mm y recorrido en el eje Z de 320 mm. La máquina ofrece una velocidad vectorial de 110 m/min y una potencia de husillo principal de 6 kW hasta 12 kW. Si busca una máquina CNC para trabajo de madera de alta calidad, debería considerar la HOLZHER dynestic 7507 que tenemos a la venta. Contáctenos para más detalles. • Altura de mecanizado: hasta 80 mm desde la parte superior de las ventosas • Velocidad vectorial: 110 m/min • Husillo principal: 6–12 kW (refrigerado por aire o líquido) • Cabezal de taladrado: 14–24 husillos (según configuración) • Cambiador de herramientas: 6, 12 o 18 estaciones Equipamiento adicional • Bomba(s) de vacío: 250 m³/h por bomba (hasta 500 m³/h en total) Iedpfxsyi D Ens Adkjtd

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, This 4-axis BIESSE Rover S FT 1536 was manufactured in 2018. It features a robust gantry construction, a working area of 3765 × 1560 mm, and a main spindle power of 13.2 kW. It is equipped with an HSK-F63 tool holder system, a 12-position disc-type automatic tool changer, and a BIESSE BH 10 drilling unit offering extensive vertical and horizontal drilling capabilities. Additional features include a grid vacuum table, two 500 m³/h vacuum pumps, and DXF file compatibility. Contact us for more information about this machine. • Weight (kg): 3000 • Main spindle: 1 spindle, 13.2 kW • Axes: 4 • Working area (X × Y): 3765 × 1560 mm • Torque support: 4th axis (C-axis rotation) • Tool holding system: HSK-F63 Ijdpfex D Iqvsx Adkstd • Tool change positions: 12 (disc changer) • Tool length measurement: Yes • Drilling unit: Vertical drills: 10, Horizontal drills: 4 (X-direction), 2 (Y-direction) • Grooving saw: In X-direction • Vacuum table: Grid table • Vacuum pumps: 2 × 500 m³/h • Extraction system: Cleaning arm discharge device • Lubrication: Automatic • Air blast device: Yes • Control system: Interface with DXF file compatibility • CE marked: Yes • Tools, tool holders, aggregates, and mechanical clamps shown in the photos or videos are not included in the scope of delivery.