Dodatki in nadomestni deli za CNC obdelovalne centre (les) nakup rabljenega (14)

Stanje: dober (rabljeno), IMA LED assembly aid Used, in fully functional condition. Approx. 60 LEDs 15-pin serial connector on both sides Dimensions: 18 x 56.7 x 312 mm, including 10 mm for the connectors Direct purchase available in our online shop on our website. Hedpfsbxx Iujx Agxel

Leto izdelave: 2001, stanje: dober (rabljeno), IMA gluing unit Hsdpfobxx Ikox Agxel Spare part for e.g. IMA 680 / 480 / 980 Edge banding unit for 4-sided edging and all-round bonding on butt joints with: - Main pressure roller, diameter 100 mm, and pneumatically controlled secondary pressure roller, diameter 35 mm - Glue application for coating the edge material, with temperature and level control - Servo drive for edge feed with automatic adjustment to feed speed - Hot air post-activation unit 7.5 kW, on the glue side - IR emitter 600 watt on the decorative side for preventing material deformation on small radii - Pneumatically driven cross-cut saw - Butt joint detection - NC axis Rotation range up to 740 degrees, pneumatic Z-stroke 125 mm - Separate NC axis in Y (in portal applications X) operating independently from the main axis Part year: 2001, taken from IMA 680 V No. 2216 Scope of delivery as shown Please check if this part can be installed in your machine. No returns possible. The unit was in production use for approx. 2 years and is in good condition. Technical data subject to change.

Stanje: potreben popravila (rabljeno), - Power: 5.5/7.5 kW Hsdpfxsia N Ans Agxel - removed from IMA Quadroform

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Kompletni pnevmatski vpenjalni sistem Hjdpfeyur N Sox Agxjl

Stanje: rabljeno, Serija stebelnih rezkarjev za CNC stroje. Hjdpfxjxfithe Agxol

Stanje: rabljeno, Uporaba: Obdelava lesa Premer: Različni Teža: 12 kg Dolžina: Različne Vpenjalni steblo: Različni Hsdpfxevy Apis Agxjl Stebelni rezkarji in svedri za CNC stroje – novi, neuporabljeni, nabrušeni in rabljeni, kot je prikazano na vzorčni sliki.

Leto izdelave: 2009, stanje: zelo dobro (rabljeno), PLC pro CNC stroj TECH/Morbidelli. Hodpfjflvhbjx Agxjl

Leto izdelave: 2010, stanje: skoraj kot novo (rabljeno), I am selling a radius copying milling unit for edges, suitable for CNC machining centers with edge banding by HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc. 12,000 rpm. Radius R2mm. Hjdpfx Ashw Db Isgxel HSK63 holder. Available immediately.

Stanje: dober (rabljeno), IMA BENZ drilling unit 10 + 11 spindle with additional milling unit and horizontal boring head 2 x 3 spindles for IMA 310, 410, 610 Hjdpfx Ageudludsxjl If you are looking for another drilling gearbox from Homag or IMA, contact us or visit our webshop on our website. The IMA BENZ drilling unit is a versatile and high-performance tool, specifically designed for IMA 310, 410, and 610 machines. It is a 10 + 11 spindle drilling aggregate with an additional milling unit and a horizontal boring head with 2 x 4 spindles. Here are some technical specifications: Unit No.: 4-08300 and 4-07753 Drawing No.: 000W00004824 and 000M11100819 Motor speed: 1max = 4800 min⁻¹ Spindle speed: 8100 min⁻¹ and 8400 min⁻¹ Drive power: 4 kW Gear ratio: i = 1:1.69 and 1:1.75 Milling spindle: For the use of milling tools The unit is pre-owned but in working condition, and offers high productivity due to the ability to perform multiple drillings simultaneously, significantly reducing machining times.

Stanje: dober (rabljeno),

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 48 kg, FISCHER IMA Main Spindle FEZPS 100×88.3 HSK F63 Motor Spindle Electric Spindle with C Axis No. 123866 | Item No. 123866 – IMA CNC (spindle motor, main spindle, C axis) Item No.: 123866 Manufacturer: E. Fischer AG Machine Focus: IMA CNC Spindle Label: FEZPS 100×88.3 HSK F63 Serial Number Range on Spindle: 123866 Serial No.: as per nameplate Manufacturing Date: 15.07.2004 Technical Description An original FISCHER main spindle, model FEZPS 100×88.3 with HSK F63 tool interface, is offered for IMA CNC machining centers. The designation FEZPS 100×88.3 HSK F63 is the key identifier for this spindle and is crucial for compatibility checks. Additionally, the spindle is equipped with an integrated C axis, a W axis, and a mounted permanent magnet motor. Connections and Design The spindle features several connectors in the upper terminal box: • Main power connector for motor supply • Separate circular connectors for C axis and encoder signals • Coolant water connections at the spindle base labeled WATER IN and WATER OUT • Protecting Air Flow connection for compressed air sealing The arrangement, design, and pin assignment of these connectors depend on the machine and spindle type and must be compared to your existing spindle before purchase. Technical Data (As per nameplate) Type: mW 13.5/10 4 No.: 964207 Class No.: B Rated voltage: 28 to 380 V Frequency: 25 to 400 Hz Rated current: 2.6 to 2.8 A Rated power: 0.55 to 1.2 kW Rated speed: 680 to 11,900 rpm Protection class: IP55 Number of poles: 4 Efficiency: 81.1% Model: FEZPS 100×88.3 Weight Approx. 45 kg Dimensions Approx. L × W × H = 420 × 220 × 650 mm Technical Application Used as main spindle in IMA CNC machining centers with C axis for precise milling, drilling, and positioning operations. Important Compatibility Notice Compatibility of this spindle must be checked using the designation FEZPS 100×88.3 HSK F63, the item number 123866, the nameplate data, and the arrangement of the connectors in the upper terminal box. The housing number is for internal reference only and is not sufficient for proper identification. Condition Hjdpfx Asychd Uogxjl Used, tested, and fully functional Signs of use as shown in photos

Leto izdelave: 2025, stanje: novo, The universal assembly and adjustment device (HSK 63) is designed for the safe clamping of all types of units outside the machine—regardless of design and machine interface. In addition to maintenance work on the unit, shank tools or complete tool sets can be reliably mounted and adjusted, whether installed in the unit, in tool holders, or on milling arbors—quickly, precisely, and safely. Thanks to its compatibility with all common machine connections, the device is highly versatile, no matter the position or number of locking or support bolts on the unit. Tool holders with nesting turbines also fit without issue. Whether it’s setting angles on swiveling units, adjusting tool positions on tracer units, or tool changes on multi-spindle drilling heads, our assembly and adjustment device is THE indispensable tool for any workshop with a CNC machine. - Easy handling of units of various designs - Suitable for all common machine interfaces - Secure clamping and alignment of tools - Universally applicable for assembly, servicing, and production - Robust construction for long-term use Availability: Immediately ex stock Stock location: Flörsheim Hjdpfoxmb Nwjx Agxol

Stanje: dober (rabljeno), Leto izdelave: 2014,

Leto izdelave: 2022, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Smo Penope Oy in ponujamo rešitve za industrijo na Finskem in po vsem svetu. Smo uradni zastopnik Biesse na Finskem. Hsdju T D Iuepfx Agxsl Vakuumski bloki za CNC stroj Biesse. 130x140 h75 18 kosov 125x75 h75 8 kosov 120x50 h75 10 kosov V zelo dobrem stanju, samo preizkušeni in nato skladiščeni. Cena je za celoten paket, 36 kosov.