Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, širina obdelovanca (maks.): 1.300 mm, višina obdelovanca (maks.): 300 mm, Plačilna proizvodnja na področju lesa na CNC strojih Hundegger Plačilna proizvodnja v leseni gradnji – predizdelane lesene nosilne konstrukcije, montažne hiše in brunarice na našem Hundegger Robot-Drive 1300 centru za obdelavo lesa. Holzbauzentrum.at Isdjykyhuepfx Adketd PREDNOSTI: Prilagoditev individualnim nalogam 5-osno žaganje, režanje in označevanje za povečanje prepustnosti Leseni prerezi od 20 x 60 do 300 x 1.300 mm 6-osna tehnologija = obdelava vseh 6 strani elementa v enem prehodu 6-osna tehnologija = uporaba 24 različnih orodij 6-osna tehnologija = doslej nepoznane možnosti obdelave

Stanje: potreben popravila (rabljeno), - Power: 5.5/7.5 kW - removed from IMA Quadroform Isdoia N Anopfx Adkjtd

Stanje: dober (rabljeno), Leto izdelave: 2000,

Stanje: zelo dobro (rabljeno), Processing Center HOLZ-HER EVOLUTION 7405 -used- Through-feed machining, 4-sided edge milling possible, integrated vacuum pump, automatic suction cup positioning, hardened, dust-protected prism guides, ball screw drives on all axes, network card for remote maintenance, integrated control cabinet, control cabinet cooling with heat exchanger, manual control device, XL drilling head, saw unit for grooving in X-direction, pick-up tool changer, automatic central lubrication ----- Technical Data ----- Min. workpiece length X: 200 mm Itedsyrp Sropfx Adked Min. workpiece length Y: 70 mm Min. workpiece thickness: 8 mm Max. workpiece length X: 3,200 mm Max. workpiece length Y: 920 mm Max. workpiece thickness: 70 mm Control software: CAMOUS HOPS Main spindle motor power: 6.5 kW Main spindle speed: 1,000 - 18,000 rpm Main spindle mount: HSK-F63 Drilling unit motor power: 1.7 kW Drill spindle mount: M10, fitting seat 11 mm Number of vertical drill spindles: 13 Number of horizontal double drill spindles in X-direction: 2 Number of horizontal double drill spindles in Y-direction: 1 Saw blade diameter from saw unit: 120 mm Number of tools in changer: 6 Extraction connection diameter: 2 x 120 mm + 1 x 140 mm Required air volume: 4,100 m³/h Required static vacuum: 2,500 - 3,000 Pa Required air speed: 30 m/s Compressed air connection: 6 bar Compressed air requirement: 300 l/min Quality Info: - Fully cleaned - Electrical system checked - Pneumatic system checked - Set up to manufacturer specifications - Immediately ready for operation

Stanje: novo, MASTERWOOD CNC Processing Centre Type MVD 900 - Edition Partnership - Demonstration Machine Through-feed processing Ball screw spindles on all axes Network card for remote maintenance Integrated control cabinet Itedpfx Asyrhcpodkod Saw unit for grooving in X-direction Pick-up tool changer Automatic central lubrication Sensor for panel measurement ----- Technical Data ----- Min. workpiece length X: 250 mm Min. workpiece length Y: 80 mm Min. workpiece thickness: 10 mm Max. workpiece length X: unlimited mm Max. workpiece length Y: 990 mm Max. workpiece thickness: 60 mm Main spindle motor power: 4.5 kW Main spindle speed: 1,000 - 18,000 rpm Main spindle holder: ISO 30 Number of vertical drilling spindles: 20 units Saw blade diameter (saw unit): 125 mm Number of tools in changer: 6 units Extraction connection diameter: 100 + 100 mm Includes: - Complete tool set: Drill bit set for drill head 1 carbide grooving saw blade 2 x tipped shank slot cutters 1 carbide replaceable tip finish cutter 3 collet chucks with collets - New demonstration machine -

Stanje: rabljeno, številka stroja/vozila: 008372, Delovno območje os X: 4140 mm Delovno območje os Y: 1850 mm Iedpsylixljfx Adkotd Delovna površina: z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 13 kW Število krmiljenih osi: 5 osi Največja višina roba: 45 mm Število vrtalnih vreten: 23 Število mest za orodja: 18

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, številka stroja/vozila: 0-201-22-3325, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 5.800 mm, širina obdelovanca (maks.): 1.200 mm, model krmilnika: Homatic-CNC System PC83 mit Windows NT 4.0, hitrost pomika os X: 80 m/min, največja hitrost vretena: 18.000 obr/min, No reserve price – guaranteed sale to the highest bidder! Itsdpfx Aeyic Tuodksd Bidding obligates the buyer to collect the item punctually on 20.03.2026! 4-axis CNC machining center for drilling, milling, edge banding, and finishing: Saw and crosscutting unit for tool changer Drilling and milling unit (4 spindles) for tool changer Combined flush/radius milling and finishing unit for tool changer Air nozzle for workpiece edge for tool changer Attention: The scope of delivery includes only the units mentioned above. No vacuum suction cups, tools, or tool holders—possibly shown in the pictures—are included! TECHNICAL DETAILS Console clamping table "K": 12 movable consoles for holding vacuum cups with longitudinal and side stops, 4-fold occupancy Max. workpiece length with single set-up: 5,800 mm Max. workpiece length in pendulum mode: 2,200 mm Max. workpiece width: 1,200 mm Max. workpiece thickness (with standard 100mm high suction cups) with edge: 60 mm (when dust extraction hood is in position 1) Max. workpiece thickness (with standard 100mm high suction cups) without edge: 60 mm Max. workpiece thickness (with standard 100mm high suction cups) without edge: 120 mm (when dust extraction hood is in position 2) Support equipment Drilling head: 17 vertical spindles 2x main spindle 12 kW water-cooled for HSK (speed 18,000 rpm with C-axis and 12-position disk tool changer) Separate Y-axis for 2nd main spindle plus aggregate interface with integrated pneumatics and electrics Electronic supply and swivel drive C-axis: swivel range without limitation. Edge banding unit, 360°, for changeover into right main spindle Max. edge height: 65 mm Pickup station right for glueing unit storage Pre-cutting station and triple roll magazine Adapter units Combined flush/radius cutting and finishing unit (profile scraper) Saw and crosscutting unit Drill-milling unit, 4-spindle (crosshead) Air nozzle for workpiece edge MACHINE DETAILS Control: HOMATIC Control PC 83 with Windows (NT 4.0) EQUIPMENT WOODWOP programming system version 5.0 Network connection Laser positioning aid Chip conveyor belt Safety: Foot mats at front, side safety guards, rear: installation against wall Note: A loading aid can be provided for a deposit of €5,000. Upon return, the deposit will be refunded minus 10%.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Delovno območje X: 4000 mm Delovno območje Y: 1600 mm Elektromandrel z osjo C, moč 11 kW, vpenjalo HSK 63F Glave za vertikalno vrtanje: 17 Glava za horizontalno vrtanje v križnem položaju + žaga Skupina za rezkanje in čelno obdelavo Skupina za lepljenje 360° Kombinirana skupina za obrezovanje/strganje Magazin za robni trak z 2 postajama Krožni magazin za 12 pozicij Krmiljenje: Power Control PC 85 WoodWop 7.1 (nadgradnja izvedena leta 2018, cena cca 9.500 €) Isdpfx Adeyprr Nsketd Delovna miza z 8 nosilci in priseski Vakuumska črpalka Elmo Rietschle Varnostne preproge Transportni trak za ostružke

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Na voljo je CNC dvovretenasta obdelovalna linija za les Homag. Hitrost pomikov: 35m/80m/25m/min, C-os: 360°, A-os: +/-100°, Z-hod: 600mm. Obdelovalna dolžina obdelovanca: 2450mm/17400mm, največja širina obdelovanca: 1900mm, največja debelina obdelovanca (vključno s prijemali): 300mm. Moč glavnega vretena: 15kW, hitrost vrtenja: 24000o/min, vpenjalni sistem: HSK-F63, premer žaginega lista: 350mm. Moč drugega vretena: 18,5kW, hitrost vrtenja: 24000o/min, vpenjalni sistem: HSK-F63. Število orodnih mest: 18/2x10. Skupne dimenzije X/Y: pribl. 19000mm/6300mm, krmiljenje: Homag. Vključuje podtalni rezkalni agregat Homag, 3x izmenjevalec orodij, pickup mesto, vpenjalne platforme, vakuumske prijemalke, odlagalnik obdelovancev, laser in drugo opremo. Dokumentacija je na voljo. Ogled na lokaciji je možen. Itjdpfxoytgn Tj Adked

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: AA1/018167, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 18.050 h, vhodna napetost: 400 V, vhodni tok: 59 A, dolžina obdelovanca (maks.): 3.300 mm, širina obdelovanca (maks.): 1.400 mm, višina obdelovanca (maks.): 180 mm, število osi: 5, število mest v zalogovniku orodij: 26, skupna višina: 3.500 mm, skupna dolžina: 6.000 mm, skupna širina: 3.500 mm, leto zadnje generalne obnove: 2025, Oprema: dokumentacija / priročnik, Nous proposons ce centre d’usinage SCM Tech Z5 d’occasion. Année de fabrication : 2015, il s’agit d’une fraiseuse CNC 5 axes, actuellement branchée et prête à être présentée. Données techniques et équipement : • Modèle : SCM Tech Z5 • Type : AA1/018167 Itodpfx Adjynwu Tjksd • Année : 2015 • Zone d’usinage : 3 300 × 1 400 × 180 mm • Axes : version 5 axes • Commande / logiciel : Maestro version 1.00.022.1034 (dessin 3D et fraisage) • Système Clemex inclus • Licences supplémentaires : 1× dongle 3D, 2× dongles 2D • Alimentation : 400 V / 59 A • Pompe à vide : type Q2EFA132M6C-34 • Pack d’outillage avec env. 20 fraises (y compris fraises DIA, à plaquettes, d’ébauche, à gorge et à arrondir). • Je propose également mon Palette CAD relié à la machine avec deux licences. (18 000 € HT) Pour toutes questions ou informations complémentaires, n’hésitez pas à nous contacter par message ou par téléphone.

Stanje: rabljeno, številka stroja/vozila: 008198, Delovno območje os X: 4200 mm Isdpex A Hbksfx Adkjtd Delovno območje os Y: 1400 mm Delovna površina: z vakuumskimi konzolami Moč glavnega vretena: 18,5 kW Število krmiljenih osi: 4 osi Največja višina roba: 60 mm Število vrtalnih vreten: 35 Število mest za orodje: 26

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 1.800 h, No. 3131 CNC Machining Centre FORMAT-4 profit H10 22.43 Used, year of manufacture 2017 Operating hours approx. 1800 h Package consisting of CNC Machining Centre FORMAT-4 profit H10 22.43, Feeding Unit FORMAT-4 L-Motion, and Extraction System FELDER RL 300 CNC Machining Centre FORMAT-4 profit H10 22.43 Technical Data: Phenolic resin matrix table system Grid table with two stop rows Automatic central lubrication HARDWARE control computer Mobile control console Handheld terminal for remote axis control Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine frame: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24,000 rpm Central extraction via combined connections (D=250mm) Software: Woodflash German (H20/H08/H10/H50) Axis travel H10 22.43: X= 5230 mm / Y= 2560 mm / Z= 280 mm Working area: X= 4300 mm / Y= 2160 mm / Z= 105 mm Axis positioning speed: X= 100 m/min / Y= 100 m/min / Z= 30 m/min Itedpfx Adjrrh T Ajkod Feeding Unit FORMAT-4 L-Motion Technical Data: Year of manufacture 2017 2-axis version with 4 storage positions for loading an H10 with lifting table CNC loading Gentle transport Fully automatic panel handling Workpiece dimensions: Length 2000-4200 mm / Width 600-2100 mm / Thickness from 8 mm / Panel weight 200 kg Density: Chipboard 650 kg/m3 / Raw MDF 750 kg/m3 Stack height 1800 mm Extraction System FELDER RL 300 Technical Data: Year of manufacture 2023 Nominal volume flow 6000 m3/h, H3 GS dust-tested, JET cleaning Compressed air connection 3/4 inch Connection pressure 7 - 12 bar at 40 NL/min Operating pressure in the unit 6 bar Chip container volume 500 l Fire extinguishing system with powder extinguisher, 12 kg dry powder extinguisher Sale on behalf of customer, ex location Leipzig, without dismantling, transport, or installation Errors in description and price reserved Dismantling and loading by us is available as an option To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale takes place in as-is condition Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; sold as seen Pictures and videos are examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Homag Machining Center Genius BAZ20/30/14/D Electronically controlled milling and edge banding machine, post-processing and drilling center for batch-based manufacturing of furniture components, solid wood, or similar materials. Base machine: - Heavy-duty, stable machine bed with a compact linear guide system. - Unit carrier with linear guide system, ball screw, and digital AC servo motor for positioning the Z-axis, travel path 340 mm. - Automatic central lubrication for all drives and linear guides. - Designed for the attachment of various table configurations. Control: Wood Wop 5.0 - Enlarged Z-axis stroke: 500 mm - Extension of the anti-slip mat - Pass-through table B20/30+40/…/D manual - Motorized width adjustment for longitudinal console D-table - Chip conveyor for B../30+40/K - Stop pins for edge overhang - Main spindle: 12 kW - 70-position chain tool changer for B20 for HSK 63 F tools - Aggregate interface for main spindle Itsdpfx Ajx Nrk Hedksd - Electrical/electronic interface: 220/24 volts - Gluing unit on 4 sides for main spindle - Melting unit with granulate container - External edge changer, automatic, 3-position - Rack exchange system for aggregates and tools - Rabbet pressing zone for main spindle - Flush-trimming unit for tool changer - Saw and cross-cutting unit for tool changer - Drilling-milling unit, 4 spindles for tool changer - Lock case milling unit for disc changer - Vertical milling unit with scan ring - Sanding unit with air blow nozzle - CNC programming system Wood-Wop - Postprocessor for BAZ - Free-standing operator panel Location: Ex works, customer site - Immediately available - System must be dismantled by the buyer at short notice

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, številka stroja/vozila: 0-250-05-3373, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, potovalna razdalja osi X: 4.035 mm, pomik osi Y: 1.720 mm, pomik po osi Z: 380 mm, Oprema: dokumentacija / priročnik, Ponujamo to brezhibno in takoj pripravljeno obdelovalno središče Weeke Optimat BHC 550, letnik 2001. Proizvajalec: Weeke Model: Optimat BHC 550 Letnik: 2001 Stanje: pripravljeno za uporabo Kategorija: obdelovalno središče Stroj je priključen in pripravljen za demonstracijo. Pred nekaj dnevi smo posneli demo video, ki prikazuje brezhibno delovanje stroja. Na zahtevo vam ta video z veseljem pošljemo prek WhatsAppa. Nameščena programska oprema: woodWOP 8.0 verzija 6.0.71 / 8.0.231.0 (32bit). Dodatno v obsegu dobave: vse obvezne varnostne rešetke in ograje krmilna omara z dodatki vakuumska črpalka BECKER KVT 3.100 Ijdpfx Aoyvkygsdkotd Termo-Tec laserska hladilna enota Thermochiller 1kW tip P601-015 vsa dokumentacija, navodila za uporabo, električne sheme Za dodatna vprašanja ali več informacij nam pišite ali nas pokličite. Vse navedene informacije so brez garancije.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: 0-250-84-4817, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, potovalna razdalja osi X: 4.300 mm, pomik osi Y: 2.250 mm, pomik po osi Z: 400 mm, dolžina obdelovanca (maks.): 4.300 mm, širina obdelovanca (maks.): 2.250 mm, proizvajalec krmilnikov: HOMATIC, skupna višina: 2.800 mm, dolžina mize: 4.300 mm, širina mize: 2.250 mm, model krmilnika: PC86 PowerControl, moč vretenovega motorja: 12.000 W, Oprema: dokumentacija / priročnik, HOMAG CENTATEQ N-800, BHP 210/43/22/R 4-axis CNC machining center Year of manufacture: 2019 Operating hours: 7,840 h main operation / 2,420 h secondary operation Part counter: 28,661 (as of 13.01.2026) Maximum workpiece dimensions: • X-axis: 4,300 mm • Y-axis: 2,250 mm • Z1-axis: 410 mm, Z2-axis: 185 mm SPECIFICATIONS / CONFIGURATION MATRIX-PRO machining table, size 4,300 x 2,250 mm Ijdpsx Rcdajfx Adkjtd - 4 pneumatically lowerable stops with electronic position detection - 3 vacuum pumps, capacity per unit 290/345 m3/h at 50/60 Hz, total 870/1,035 m3/h - 2 independently controlled vacuum zones, each 2,150 x 2,250 mm - 3 safety/anti-slip mats, safety enclosure with door - Main spindle 11 kW, 24,000 rpm - Liquid cooled - Spindle with C-axis interface - Tool holder/clamping: HSK F63 - SENSO-FLEX probing system, z-direction controllable - Vertical drilling unit with 21 spindles, drive power 2.3 kW - 2 x 14-position tool changers (carousel), one each at front and rear 1 ROLLER TABLE for panel handling, 7,080 x 2,200 mm Control / Software: - PowerControl PC86 powerTouch - WoodWop 7.1 Machine dimensions: 11.60 x 4.50 x 2.80 m The machine can still be viewed in operation. Available from September 2026 (approx. calendar week 37)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, centre d’usinage CNC d’occasion Fabricant : Homag Modèle : Drillteq V-200 (Optimat BHX 055) Année de construction : 2021 Zone de travail X : 200 – 3050 mm Zone de travail Y : 70 – 850 mm Iodpfxjymzkvs Adkotd Zone de travail Z : 12 – 60 mm, épaisseur spéciale de la pièce : 8 mm Broches de perçage verticales : 13 pcs Broches de perçage horizontales en X : 4 pcs Broches de perçage horizontales en Y : 2 pcs Scie à rainurer dans l’axe X Broche de fraisage : 10 kW ; 1 250 – 24 000 tr/min Changeur d’outils 4 positions (ATC) Système de serrage de la pièce avec pince Longueur de la pièce : 3050 mm Largeur de la pièce : 70 – 850 mm Épaisseur de la pièce : 8 – 56 mm ; poids max. 35 kg Commande POWERCONTROL PC86 power touch avec écran tactile FullHD 24″, système d’exploitation Windows 10 Connexion réseau, Tapio ready préconfiguré WoodWop 7.0 incl. MDE et logiciel de gestion de production Système de lecture de codes-barres BASIC Livraison strictement limitée à tous les outils et porte-outils HSK illustrés !

Stanje: rabljeno, Leto izdelave: 2014, skupna višina: 2.800 mm, skupna dolžina: 10.300 mm, skupna širina: 2.450 mm, Unladen weight: 6,600 kg Price: On request - Special features: - Description: The machine is currently not operational due to an issue with the CAN bus system. - Year of manufacture: 2014 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: AA2/002546 - Number of milling spindles: 1 - Type of milling table: Beam table - Tool clamping system: HSK-F63 - Material clamping system: Pneumatic - Drilling tool included: Yes - Tool changer positions: 24 - System/software: Xilog plus - Safety features: Safety light curtain, door interlock switch, safety fence - Vacuum pump included: Yes - Quantity: 1 - Brand: Becker - Model: Vtlf 250 - Year of manufacture: 2008 - Main motor power: 5.5 kW - Connection diameter: 70 mm - Oil-free: Yes - Tools included: Yes - CNC options: Waste conveyor, hand control - CNC documentation available: USB stick - Table length: 5,200 mm - Table width: 1,300 mm - Voltage: 400 V Ijdoytcl Iepfx Adkstd - Power consumption: 64 A - Transport dimensions: 10,300 mm x 2,450 mm x 2,800 mm (L x W x H) - Transport weight: 6,600 kg - Number of transport packages: 1 Financial Information VAT: The price stated is excluding VAT VAT/margin taxation: VAT is deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Glenn Smeets

Stanje: rabljeno, Leto izdelave: 2018, Obdelovalna mera X 1.600 mm Obdelovalna mera Y 800 mm Delovna globina Z 190 mm Moč motorja 2,2 kW Teža cca 450 kg Leto izdelave 2018 - Pomik osi: X = 1.600 mm Y = 800 mm Z = 190 mm - Dimenzije (D x Š x V): 2.200 x 1.300 x 1.650 mm - Teža: cca 450 kg - Nazivna napetost: 230 V Iedeyku Uvepfx Adketd - Ponovljivost: +/- 0,1 mm - Povratno zračnost: +/- 0,05 mm - HF vreteno: 2,2 kW - Premik hitrosti: 10 m/min - Delovna hitrost: 50-5.000 mm/min

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 24.058 h, moč: 7 kW (9,52 KM), vhodna napetost: 480 V, vhodni tok: 10 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, potovalna razdalja osi X: 1.000 mm, dolžina obdelovanca (maks.): 4.000 mm, širina obdelovanca (maks.): 1.000 mm, višina obdelovanca (maks.): 60 mm, teža obdelovanca (maks.): 70 kg, število osi: 3, vrsta aktuacije: pnevmatičen, skupna višina: 1.430 mm, skupna dolžina: 2.300 mm, skupna širina: 1.500 mm, skupna masa: 1.100 kg, dolžina mize: 3.300 mm, širina mize: 1.000 mm, Oprema: CE označba, dokumentacija / priročnik, Gannomat 570 ProTec T2, BK6, vrtanje, utorni rez, še vedno priključen za predstavitev, v dobrem stanju. Idealni stroj kot dopolnitev CNC-obdelovalnemu centru za učinkovitejšo izdelavo korpusov z najkrajšimi nastavitvenimi časi že od serijske proizvodnje po kosih. Prav tako je zelo primeren kot začetniški stroj za CNC-tehnologijo obdelave po ugodni začetni ceni za manjše in majhne mizarje za učinkovito in čisto izdelavo korpusov. Možne uporabe so na primer: oblikovno in trdno, pa tudi brez tolerance spoji, kot so mozni povezavi, vrtanje vrst lukenj, vrtanje za okovje kot so pohištvene tečaje, izvrtine za ključe, razna vezna okovja kot Rastex, Cabineo in številne druge. Itodpfxsytxpvj Adked Priloženo je: priročnik z elektro shemo, izbor svedrov in cev za odsesavanje. Stroj je hitro pripravljen za nakladanje, stoji na ravni tleh.

Stanje: rabljeno, Leto izdelave: 2014, skupna višina: 2.800 mm, skupna dolžina: 6.900 mm, skupna širina: 2.800 mm, Unladen weight: 6,100 kg Price: On request - Special features: - └ Description: Repair required on B-axis and sealing leaks - Year of manufacture: 2014 - Documentation available: No - CE certificate available: No - Serial number: 10333 - Number of milling spindles [pcs]: 2 - └ Milling spindle 1: - Number of controlled axes [pcs]: 5 - └ Milling spindle 2: - Number of controlled axes [pcs]: 3 - Type of milling table: Beam table - Tool clamping system: HSK-F63 - Material clamping system: Pneumatic - Drilling tool included: Yes - Tool changer positions [pcs]: 45 - System/software: BiesseWorks - Safety features: Safety mat, safety fence, door interlock switch - Vacuum pump included: Yes - └ Number [pcs]: 2 Isdpfx Ajyr Rnuedkjtd - └ Brand: Becker - └ Type: Vtlf 2.250 - └ Year of manufacture: 2011 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Connection diameter [mm]: 60 - └ Vacuum [mbar]: 200 - └ Oil-free: Yes - Tools included: Yes - CNC documentation available: User license/keys, USB stick - Table length [mm]: 4800 - Table width [mm]: 1500 - Voltage [V]: 400 - Current consumption [A]: 39 - Fuse [A]: 63 - Power [kW]: 22.8 - Transport dimensions: 6900mm x 2800mm x 2800mm (L x W x H) - Transport weight [kg]: 6100kg - Transport packages [pcs]: 1 Financial Information VAT: The stated price is exclusive of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Glenn Smeets

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 6.586 h, skupna višina: 2.700 mm, skupna dolžina: 8.100 mm, skupna širina: 2.450 mm, Unladen weight: 4,665 kg Price: On request - Year of manufacture: 2012 - Documentation available: No - CE certificate available: No - Serial number: AA2/001992 - Operating hours: 6,586 - Number of milling spindles [pcs]: 1 - └ Milling spindle 1: - Number of controlled axes [pcs]: 4 - C-axis available: Yes - └ Milling spindle 2: - C-axis available: Yes - Type of milling table: Beam table - Tool holding system: HSK-F63 - Material clamping system: Pneumatic - Drilling tool included: Yes - └ Vertical drilling spindles [pcs]: 2 - Tool changer positions [pcs]: 12 - System/software: Xilog Plus - Safety features: Door interlock switch, safety fence, safety mat - Vacuum pump included: Yes - └ Quantity [pcs]: 1 - └ Brand: Becker - └ Model: Vtlf 250 - └ Year: 2001 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 250 - └ Connection diameter [mm]: 70 - └ Vacuum [mbar]: 800 - └ Oil-free: Yes - Tools included: Yes - CNC options: Manual control, waste conveyor - Table length [mm]: 6,000 - Table width [mm]: 1,300 - Voltage [V]: 400 Iodpfxeyr Iqae Adketd - Power consumption [A]: 47 - Fuse [A]: 63 - Transport dimensions: 8,100mm x 2,450mm x 2,700mm (L x W x H) - Transport weight [kg]: 4,665kg - Number of transport packages [pcs]: 1 Financial Information VAT: The stated price is plus VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for everything in the industrial sector Glenn Smeets

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, - 3-osiowe centrum CNC SCM Pratix S - model PRATIX 12B z 2012 roku. - Zakres osi X, Y, Z: 2500x1250x150+ mm - Liczba miejsc na narzędzia w magazynie: 8 - Stół maszyny: stół aluminiowy rastrowy, 2 sekcje. - Sterowanie: sterowanie PC - Oprogramowanie: SCM NESTING, SCM XILOG MAESTRO - Numer seryjny: AH/115920 Liczba osi frezujących: 1 Agregat wiertarski: 1 – praktycznie nieużywany Isdpouu Ntgsfx Adketd Maksymalna prędkość obrotowa wrzeciona: 24 000 obr./min Uchwyt narzędziowy: HSK-F63 Silnik główny: 6,6 kW Konstrukcja bramy: maszyna z ruchomą bramą Pompy próżniowe: 2 szt. BECKER z 2012 roku – jedna ustawiona na zewnątrz, druga zainstalowana w maszynie. Wydajność pomp próżniowych m³/h: 240/280 m³/h Interfejs do odczytu formatu CAD (.dxf) Zabezpieczenia: Odrzuty Waga ok. 2500 kg Długość: 5900 mm Szerokość: 2790 mm Wysokość: 2190 mm Automatyczny pomiar długości narzędzia

Stanje: rabljeno, Leto izdelave: 2013, moč: 9,5 kW (12,92 KM), vhodna napetost: 400 V, vhodni tok: 31 A, vhodna frekvenca: 50 Hz, potovalna razdalja osi X: 3.050 mm, pomik osi Y: 1.250 mm, število osi: 3, vrsta aktuacije: električni, skupna višina: 2.244 mm, skupna dolžina: 5.240 mm, skupna širina: 2.500 mm, skupna masa: 2.700 kg, Oprema: CE označba, Ponujamo to rabljeno obdelovalno središče SCM TECH Z1, letnik 2013. Itsdpfx Adsyvpp Hoksd Oznaka tipa: FORA-FRESATRICE CN Proizvajalec: SCM Serijska številka: AA1/017424 Tip: TECH Z1 Model: TECH Z1 Leto izdelave: 2013 Teža: 2700 kg Nazivna napetost: 400 V Nazivni tok: 31 A Frekvenca: 50 Hz Kratkostični tok: 10 kA Za dodatna vprašanja ali informacije nam pišite ali nas pokličite.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 3300 x 2100 x 2100 mm Weight: 1500 kg Total power requirement: 17.5 kW CNC Machining Center ROUTERMAX 1325 SIM 4SP - Working area X-axis: 1300 mm - Working area Y-axis: 2500 mm Itsdpfx Ajv A Ha Dodkjd - Working area Z-axis: 180 mm - 4 x 2.2 kW water-cooled milling spindles, ER 25 with CHILLER CW 3000 cooling unit - All 4 spindles operate simultaneously (SIMULTANEOUS MODE) - 4 x chip extraction hoods - Spindle speed: 6,000 – 24,000 rpm - Drive system (X & Y axes): rack and pinion - Drive system (Z axis): ball screw spindle - Drive motors: stepper motors - Max. traverse speed: 20 m/min - Max. working speed: 12 m/min - Working accuracy: 0.05 mm - Vacuum grid table with 4 sections and T-slots - 5.5 kW dry-running, air-cooled vacuum pump - Tool length sensor - Controller: DSP Type NK 105 - Interface: USB - CAD/CAM software: Vectric Cut2D PRO (including Nesting) - Electrical connection: 3-phase, 400 V, 50 Hz - Operating ambient temperature: 0–45°C - Width: 2100 mm - Length: 3300 mm - Weight: 1500 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4000 x 2900 x 2100 mm Weight: 2500 kg Total power requirement: 24 kW CNC Machining Center ROUTERMAX ATC 2130 ECO - Working area X-axis: 2100 mm - Working area Y-axis: 3000 mm - Working area Z-axis: 300 mm - Milling spindle, air-cooled, 9.5 kW, ISO 30 - Spindle speed, infinitely variable: 24,000 rpm - Tool changer: 12-position, side-mounted - Drive system (X & Y axes): Rack and pinion - Drive system (Z axis): Ball screw - Servo motors: AC Leadshine 850 W - Max. traverse speed: 45 m/min - Max. working speed: 20 m/min - Working accuracy: 0.05 mm - Vacuum grid table with 8 zones and T-slots - 2 vacuum pumps, 5.5 kW each, air-cooled - Pneumatic workpiece positioning stops, 2 each in X and Y - Tool length sensor Itedpfxev A E Uao Adked - CAD/CAM software: VECTRIC CUT 2D PRO (nesting included) - Controller: DSP NK105 G3 - Interface: USB - Electrical connection: 3-phase, 400 V, 50 Hz - Operating ambient temperature: 0-45°C - Width: 2900 mm - Length: 4000 mm - Weight: 2500 kg