Stroj Za Centriranje nakup rabljenega (88.767)

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Clamping range: 25 mm ID to 120 mm OD Electric drive: 1050 W, 230 V, 50 Hz Tool holder speed (no load): 150 rpm, nominal: 70 rpm Clamping with wrench Manual tool feed Weight approx. 6.5 kg Includes operating manual Supplied in wooden case Incl. 1 facing tool (90°) and 2 beveling tools (30°) Itjdpfevr Ec Aox Af Tob

Stanje: dober (rabljeno), Rezkalni / centrirni stroj UMA SZM 100 E Letnik: 1976 Serijska številka: 33-0241 Vpenjalno območje: 10-160 mm Premer za čelno obdelavo: do 100 mm Razdalja med vpenjalnima točkama: 90-1950 mm Vrtalno vreteno: ISO40 DIN2079 2 vpenjalni glavi Iodoxt Dzpjpfx Af Tetb - Poseben program za notranje rezanje navojev z povratnim podajanjem in rezervacijo vretena kot drugi program v avtomatskem načinu - Samodejno 3-kratno razbremenje za globlja vrtanja - 2-rezilna orodna glava, pozitivna, z utorom 12H7 za držalo z dvema HM izmenljivima ploščicama SPGN 190 (DIN4968) in držalom za centrirni sveder R4,0 mm Stroj je bil do zadnjega v uporabi in je popolnoma funkcionalen. Cena je neto, prost naložen s skladišča.

Stanje: rabljeno, Leto izdelave: 1991, Technical Details: Workpiece diameter - max.: 8 - 50 mm Workpiece length: 5 - 500 mm Spindle speed: 100 - 1000 rpm Workpiece diameter - max.: Ø 50 mm (solid material) Workpiece diameter - min.: Ø 8 mm (solid material) Workpiece diameter - max.: Ø 70 mm (tubing) Workpiece diameter - min.: Ø 8 mm (tubing) Wall thickness: 1 - 10 mm Centre height: 300 mm Spindle bore: Ø 90 mm Cut-off length with swing stop min./max.: 5 - 500 mm Total power requirement: approx. 25 kW Machine weight approx.: on request t Machine dimensions (LxWxH): approx. 5.8 x 1.5 x 1.7 m Control cabinet dimensions: 1300 x 450 x 1950 mm Dimensions (L x W x H): control panel: 0.36 x 0.30 x 0.68 m Dimensions (L x W x H): material feed: 5.5 x 0.95 x 1.15 m Cut-off turning and end-finishing machine including bar feeder (Manufacturing processes: cutting to length and deburring, parting-off, facing, grooving, centering, and more possible) Working principle: stationary material – rotating tools Further features: - Steplessly adjustable parting/cut-off head speed: 100 - 1000 rpm Iedpfxju Iww Us Af Totb - End-machining: 4 tool sets with speed from 52 - 1320 rpm - Feed for cut-off head/tool: stepless, 0 - 0.3 mm/rev, with rapid and working feed, hydraulic - Feed for deburring device: stepless up to 0 - 175 mm/sec. - Material feed speed: 170 mm/sec. - Piece counter - Bar feeder Operation via operator panel/control panel i.D.

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2 6750 007, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, Ponujamo rabljeni centrirni in stroj za obdelavo koncev WAFIOS AF 750, letnik 2002. Tip: AF 750 Št. stroja: 2 6750 007 Leto izdelave: 2002 Itodex Srnqspfx Af Teb Št. načrta: 6750 2 9000 07 Napetost: 3~ 400 V Frekvenca: 50 Hz Krmilna napetost DC: 24 V Krmilna napetost AC: 230 V Tok: 35 A Varovalka: 50 A Za dodatna vprašanja ali več informacij nam pišite ali nas pokličite.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1976, Here we offer centering and facing tools for a UMA counterbore and centering machine, type SZM 80/800. Approximately 11 complete sets are available for double-sided machining. Please refer to the pictures for further details. Please note: Only the tools are being offered; the machine has already been sold! Itedohfww Iopfx Af Tob Purchase is possible as a complete lot or by set upon request. The holders are specifically designed for UMA SZM machines.

Stanje: rabljeno, Stroj za centriranje gredi ipd. Na voljo sta 2 kosa. 1x proizvajalec Inpro 1x proizvajalec neznan Oba stroja sta delujoča in takoj pripravljena za uporabo. Prodajna cena na stroj: 1x 2000 € Itodpfsx Rb Ahsx Af Tsb 1x 2500 €

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Simply Center Punsh – the center punching aid! Revolution in precision: We present the ‘Simply Center Punch’ The world’s unique scribing device – our own development from Northern Germany. Ijdpfx Asxb Ucaef Tetb The Problem No more inaccurate center punching of round parts • Are you familiar with the challenges of precise center punching of shafts/bars from 15 mm to 400 mm? • Inaccurate positioning. • Poor lighting conditions • No glasses for older users • Time-consuming manual alignment • Inefficient and error-prone processes • The market offers no universal and reliable solution for various diameters. Our Solution: Simply Center Punch – World First! Simply Center Punch: Precision, made simple. • Unique worldwide: A center punching/marking device developed and utility model protected by us, setting new standards. • 100% in-house development: From the first concept to the finished product – all from a single source. • Manufactured in-house: We stand for quality “Made in Germany”. • Versatile use: For diameters from 15 mm to 400 mm. • Center punching at the push of a button: Simply apply, turn the handle and punch. The advantages at a glance Your benefits. • Maximum precision: Centers drillings and markings with 0.3 mm accuracy. • Time and cost savings: Accelerates work processes and reduces rework. • Extremely easy to use: Intuitive operation, no prior experience required – weight only 780 g. • Universally applicable: One tool for almost all diameters in mechanical engineering, metalworking, etc. • Robust and durable: Manufactured from high-quality materials for professional continuous use.

Stanje: rabljeno, Leto izdelave: 1961, Workpiece diameter - max. 0 mm Workpiece diameter - min. 0 mm Workpiece length 0 mm Total power requirement 0 kW Machine weight approx. 3 t Required space approx. 0 m The UMA was built in 1961 and the guides were modified at some point. Isdpfx Afowwl I Is Tetb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, moč: 24 kW (32,63 KM), tlak (maks.): 120 letvica, TEHNIČNE PODROBNOSTI Minimalna dimenzija za obojestransko obdelavo Premer: 12 mm Dolžina: 200 mm Maksimalna dimenzija za obojestransko obdelavo Premer: 50 mm Dolžina: 800 mm Minimalna dimenzija za enostransko obdelavo Premer: 12 mm Dolžina: 75 mm Maksimalna dimenzija za enostransko obdelavo Premer: 70 mm Dolžina: 500 mm Premer rezkarja: maks. 140 mm Vpenjanje orodja: SK40 Vpenjanje obdelovanca: hidravlični centrirni vpenjalec PODROBNOSTI O STROJU Tehnični podatki Moč: 24 kW Napetost: 400 V Itodpfx Ajxxkd Isf Tsb Frekvenca: 50 Hz Maks. tlak: maks. 120 bar OPREMA Horizontalni center za obdelavo koncev Sočasna obojestranska obdelava koncev valjastih delov.

Stanje: novo, Leto izdelave: 2024, teža obdelovanca (maks.): 12 kg, • Weight approx. 11.8 kg Isdpfsri Sicex Af Tstb • CNC-manufactured from A 600, anodized surface • Working range up to 506 mm diameter • No additional material handling required, saving crane capacity, man-hours, and energy When machines are used for this purpose, materials have to be craned to and from the machine and the picking area – the time lost for just 2 center drillings is immense. • Ready for use in seconds • Infinitely adjustable clamping across 3 diameter ranges • Produce a center hole in seconds (directly after sawing on the machine) • All components are manufactured in Germany • Center holes according to DIN 333 Form A, 60°, 5, 6.3 and 8 mm. Other sizes available upon request. A "must have" for every steel dealer! • Sale price: EUR 5,950 net plus VAT ex stock, free shipping within Germany • Scope of delivery: Fixture, Fein cordless drill, charger, • 2 batteries – complete in case • 3 center drills 5, 6.3 and 8 mm DIN 333 A with flat, incl. 3 tool holders, one 6 m

Stanje: dober (rabljeno), Leto izdelave: 2013, E.Büker - Tip N76 Stroj za obdelavo koncev / Stroj za posnemanje robov - Delovno območje 6 - 76 mm - Hitrost vrtenja 10-1800 vrt/min - Moč 0,75 kW - Podnožje - Nujna zaustavitev Itedpfoxnlnmsx Af Tsb Dimenzije: D x Š x V 0,7 x 0,5 x 1,4 metra / Teža 250 kg Pridržujemo si pravico do napak in sprememb.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Suitable for facing operations, internal/external chamfering – machine in excellent condition and supplied with extensive accessories! TECHNICAL DETAILS Workpiece diameter: 25 - 80 mm Workpiece length: 50 - 1,200 mm Max. workpiece weight: 12 kg Control: Siemens PLC Tool holder: HSK 63C Spindle speed: 350 - 12,000 rpm Working height: 1,000 mm Axial movement of milling spindle (automatic/manual, max.): 300 mm MACHINE DETAILS Itedjvpgtqspfx Af Teb Total power requirement: 26 kW Machine weight: approx. 6.8 t Space requirement: approx. 7.7 m x 2.9 m x 2.1 m EQUIPMENT - 1 work station - 2 spindle units - Feed conveyor - Discharge conveyor - Fully automatic process sequence

Stanje: dober (rabljeno), Centrirni stroj - KUHN KAZ 80-2 Itodpfx Afjxcmhws Tsb - Maks. premer obdelovanca / okrogli: 80 mm - Maks. premer obdelovanca / kvadratni: 60 mm - Dolžina centriranja – neomejeno - Vpenjalna enota z samocentričnim primežem - Pogon vretena 1,8 kW - Vpenjalna glava - Kad za ostružke - Priključni kabel - Utori za viličarja za transport Dimenzije: D x Š x V 1,7 x 0,7 x 1,4 metra / Teža 600 kg Pridržujemo si pravico do napak in tipkarskih napak.

Stanje: novo, automatic chamfering and facing machine Designed and manufactured in England - CNC Mitsubishi M70 control system - automatic cycle start - automatic shutdown for repeatable chamfer lengths - colour touchscreen operation panel - maximum spindle speed: 3,000 rpm - bar diameter: 8–80 mm - hydraulic 3-jaw chuck - cutting head suitable for all material sizes - quick-change ISO insert system - maximum chamfering/turning length: 37 mm - 4 kW motor - high-precision Mitsubishi servo drive - ball screw with high thrust performance - large machine door - internal high-performance LED work light - chip collection bin with external chip basket - lifting points for pallet truck Itodecb E Hnopfx Af Tjb - weight: 500 kg - dimensions (L/W/H): 1000 x 600 x 1200 mm CE-certified OPTIONS - mist lubrication (oil mist): €2,890 - universal chamfering head: €1,040 - 8 kW motor for hard materials: €4,150

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1985, In 2020, the machine underwent extensive refurbishment for €7,000. Proof of this is available. Operating processes: - 60° chamfering - Longitudinal turning up to a maximum of 40 mm - Center drilling Itodpfeiamn Ssx Af Tsb Fully automatic operating sequence: - Clamping, chuck closes - Rapid traverse forward - Working feed - Dwell time for cutting - Rapid traverse return - Unclamping, chuck opens Technical data: Maximum workpiece diameter, round: 80 mm Maximum workpiece diameter, hex (across flats): 70 mm Minimum workpiece diameter, round and hex: 10 mm Minimum workpiece length: 450 mm Stepless speed range Stage I/Stage II = 51–306 / 102–612 rpm Electrical equipment: 220/380 V, 50 Hz Main motor power: 1.3 / 1.8 kW Coolant motor power: 0.07 kW Required air pressure: 6–8 bar Weight: approx. 520 kg Dimensions: L 1520 mm x W 610 mm x H 1350 mm Roller conveyor

Leto izdelave: 1989, Stanje: zelo dobro (rabljeno), 1 used centering drilling machine Make: Jones & Shipman Ijdpehg Ennjfx Af Tjtb Infinitely variable speed up to 1400 rpm Drive: 0.37 kW Excellent condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Machine used in a fish processing plant, previously used for washing squid. In very good condition, like new. Itodpfx Aev T Rllsf Teb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.500 mm, najv. debelina pločevine: 1 mm, TEHNIČNI PODATKI Širina pločevine: 1.500 mm Debelina pločevine: 1,5 mm Iedpfx Asx I Egref Tstb

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2001, vrsta upravljanja: NC krmiljenje, delovna širina: 2.520 mm, najv. debelina pločevine: 4 mm, skupna masa: 3.720 kg, TEHNIČNI PODATKI Širina pločevine: 2.520 mm Debelina pločevine: 4 mm Hod zgornje prečke: 250 mm Nastavitev upogibne prečke: 80 mm PODROBNOSTI STROJA Vrsta krmiljenja: NC Dimenzije in teža Dimenzije (D x Š x V): 3.150 x 805 x 1.425 mm Teža stroja: cca 3.720 kg Pogonska moč zgornje prečke: 2,2 kW Pogonska moč upogibne prečke: 3,0 kW Itjdex I Eqqspfx Af Tjb OPREMA Nožni pedal Električni zadnji prislon Rezilo

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 607 mm, pomik po osi Z: 286 mm, model krmilnika: Fanuc 32i A, hitrost vretena za brušenje: 30.000 obr/min, The offer comprises a CNC hard turning lathe with FMB automation! The machine is from year of manufacture 2013, but was only taken into operation in 2017 (exhibition machine)! HARDINGE GT27SP GG-134HS TECHNICAL DETAILS Travel distance X-axis: 607 mm Travel distance Z-axis: 286 mm Maximum spindle speed: 6,000 rpm Number of axes: 2 MACHINE DETAILS Control: Fanuc 32i A Itodpfox I A Hpjx Af Tob Dimensions & Weight Machine dimensions with robot cell (L x W x H): 4,600 x 1,600 x 2,700 mm Weight: approx. 2,100 kg Operating hours: 34,536 h EQUIPMENT MARPOSS measuring system MicroCentric 4-410-3-QC chuck Jäger HF spindle (spindle speed: 30,000 rpm) S400 oil mist filter Spindle cooling possible FMB Unirobot LR Mate (serial number: E-83200 (robot)/ E15X36204 (controller), year of manufacture: 2015) Robot model: FANUC LR MATE 200iD7L-P2TB Controller: FANUC R30iB Part feed max.: 70 mm Axes: 6 Weight of robot cell: approx. 1,000 kg GENERAL EQUIPMENT Knoll filtration system KF110/500 (volume: 500 l) Grinding spindle holder RINECK grinding wheel receptacle Reversing station in robot cell Transport belt for raw/finished parts, 2,900 mm 2x MAS-MEX20-GT27-1-S385H holders 2x MAS-MEX20 turn sleeves 2x MAS-turn rings 2x hydraulic expansion chucks for internal boring bars Holder for turning toolholder + turning toolholder MARPOSS probe with mounting

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, loèitev (maks.): 2.400 DPI (pik na palec), minimalna gramatura papirja: 60 g/m², največja gramatura papirja: 350 g/m², širina papirja (maks.): 330 mm, največja višina papirja: 487 mm, Le prix neuf de l'imprimante était de 486 000 € HT ! DÉTAILS TECHNIQUES Résolution d'impression : 2 400 × 2 400 dpi Vitesse d'impression : 100 images par minute Volume d'impression mensuel recommandé : 100 000 à 450 000 pages Capacité d'impression mensuelle maximale : 1 500 000 pages Formats de papier pris en charge (min.) : 182 × 182 mm Formats de papier pris en charge (max.) : 330,2 × 487,7 mm Plage de grammage papier : 60 g/m² à 350 g/m² Plage de grammage papier (avec validation) : jusqu'à 400 g/m² Grammage des supports en duplex : 350 g/m² DÉTAILS DE LA MACHINE Capacité d'alimentation papier standard : 1 000 feuilles Capacité totale extensible jusqu'à : 10 000 feuilles Ijdpfx Aex Ezgpof Tetb Dimensions de la machine principale C10000 (H x L x P) : 145,5 cm x 258,6 cm x 115,3 cm ÉQUIPEMENT Qualité proche de l'offset Utilisation sur supports spéciaux et texturés Capteurs en ligne pour la gestion des couleurs Calibration automatique

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, obratovalne ure: 34.797 h, številka stroja/vozila: 2011-0250, Premer cevi (maks.): 600 mm, Dolžina cevi (maks.): 1.500 mm, Kot upogiba (maks.): 180 °, radij upogibanja (maks.): 200 mm, debelina stene: 3 mm, Original machine year of manufacture: 1996. Completely overhauled by the manufacturer in 2011 at a cost of approx. €250,000: electrical and mechanical systems extensively renewed. TECHNICAL DETAILS Tube diameter: 16 - 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 - 200 mm Tube feed length: 1,500 mm Bending angle: max. 180° + springback Tube length: 400 - 1,500 mm Tube outer diameter: 28 mm - 60 mm Material parameters Tensile strength stainless steel: max. 750 N/mm² Tensile strength mild steel: max. 450 N/mm² Performance limit (steel): Ø 60 x 3 mm Performance limit (stainless steel): Ø 57 x 2 mm Motion parameters Bending direction: left Forward bending speed: max. 22.0 rpm (infinitely variable) Return bending speed: constant 22.0 rpm Rotation angle: max. 360° Rotational speed: 50 rpm Height adjustment for multiple radii: lowest tube center 55 mm Height adjustment travel: suitable for 3-groove bending tools MACHINE DETAILS Overrun time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Operator console (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic tank volume: 340 l Control Bending planes: up to 6 (CNC programmable) Itjdpfxjx Srkle Af Tob Positioning unit: NTB version Control unit: Schwarze-Robitec operator and control console EQUIPMENT - Automatic cold tube bending machine - Tube positioning unit - Gripper - Schwarze-Robitec tube magazine - Hydraulic drive for bending table, tool clamping, sliding rail, mandrel retraction, reinforced sliding rail feed and return - Various bending tools for Ø 60 mm tube - Various accessories - Control cabinet cooling unit - Foot switch (2-way) - Schwarze-Robitec operator console - Rittal control cabinet cooling unit type SK 3361100 Note: Due to lack of operator knowledge, the machine could only be tested in setup mode. No faults are known. The machine is currently dismantled.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, številka stroja/vozila: PB12093N2025005, premer gredi: 155 mm, lastna masa: 450 kg, Oprema: dokumentacija / priročnik, Neporabljeni profilni upogibni stroj, letnik 2025! TEHNIČNI PODATKI Premer gredi: 155 mm Kapaciteta okroglega profila: 50 mm Število valjev: 3 kos PODROBNOSTI STROJA Upravljanje: konvencionalno Moč: 1,5 kW Dimenzije in teža Dimenzije (D x Š x V): 1.200 x 800 x 1.800 mm Lastna teža: 450 kg Transportni paketi: 1 kos Delovne ure: 0 Itodpfxsx Tp N Us Af Tob OPREMA Dokumentacija CE oznaka CE certifikat

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HB10011N2025006, širina mize: 550 mm, dolžina mize: 300 mm, hod: 180 mm, stiskalna sila: 28 t, lastna masa: 800 kg, Neuporabljeni stroj za upogibanje trakov, letnik 2025! TEHNIČNI PODATKI Moč: 28 t Maks. hod: 180 mm Itodpfx Afox Tp E As Tsb Širina mize: 550 mm Dolžina mize: 300 mm PODROBNOSTI STROJA Moč motorja: 4,0 kW Dimenzije in teža Dimenzije (D x Š x V): 1.300 x 800 x 1.400 mm Lastna teža: 800 kg Transportni paketi: 1 kos Obratovalne ure: 0 OPREMA Dokumentacija CE oznaka CE certifikat

Leto izdelave: 2009, obratovalne ure: 5.387 h, Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, skupna masa: 12.000 kg, skupna dolžina: 15.000 mm, največja hitrost vrtenja: 24.000 obr/min, delovna dolžina: 7.500 mm, Functions: Sawing, notching, milling, drilling, thread cutting, shifting processing TECHNICAL DETAILS Number of controlled NC axes: 14 Processing length: 7,500 mm Max. traverse speed X / Y / Z: 60 / 60 / 30 m/min A-axis rotation: ±110°, continuous C-axis rotation: ±220°, continuous Tool holder: HSK-63F Tool dimensions milling cutter / drill (max. d/l): Ø 50 mm / 200 mm Tool dimensions disc cutter (max. d): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor power: 16 kW Number of positions in the tool magazine: 16 Number of special tool positions: 2 Automatic positioning of clamping fixtures: Yes Number of clamping fixtures: 8 Profile systems with quick-change system: Yes Processing features Max. cross-section W x H / length for single bar processing: 400 x 300 / 7,500 mm Min. cross-section W x H / length for single bar processing: 30 x 30 / 300 mm Motion: Tool Max. number of profiles per machine setup: Up to 8 profiles (depending on individual bar length) Number of profile fixed stops: 2 Shifting of clamping fixtures during 2 processing steps: Automatic Steel processing (up to 5 mm wall thickness): Yes Electronics / Software Equipment Machine PC processor: Yes Operator panel with display and keyboard: 19" touch TFT color display Machine operation based on Windows® with menu navigation: Yes Self-programming without NC/CNC knowledge: Yes Schüco CAM installable on office PC (processing visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Itsdpex U Thkofx Af Tjb Weight: 12 t On-time: 20,616 h Spindle hours: 5,387 h