Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 13.209 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.050 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 700 mm, teža bale: 500 kg, kapaciteta rezervoarja za olje: 400 l, leto zadnje generalne obnove: 2025, volumenski pretok: 108 m³/h, Technical Data – Baler: Podpfx Adsw U Dt Neyjgg Manufacturer (according to nameplate): BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Model: HC 50 (equivalent to Presto HPK 50) Year of manufacture: 2007 Operating hours: 13,209 hours (status: March) Number of bales pressed: 23,379 pcs Pressing force: 50 t Specific press force: 650 kN/m² Feed chute dimensions: 1250 x 1050 mm (L x W) Filling volume: 0.96 m³ Theoretical cycle time: 32 seconds Theoretical throughput: 108 m³/hour Bale dimensions: 1100 x 700 mm (W x H), length variable Drive power: 15 kW Total current consumption: 50 A Tying: 4-fold vertical, fully automatic Throughput rates (by bulk density): - 30 kg/m³: approx. 3.1 t/hour - 60 kg/m³: approx. 4.5 t/hour - 100 kg/m³: approx. 7.2 t/hour Bale weights (with bale length 1.2 m): up to 500 kg, material-dependent Hydraulic oil tank capacity: 400 L PLC: Siemens S7-200 Effective transport dimensions (excluding baler): 6780 x 1800 x 2100 mm (L x W x H) Transport weight (baler): 8.5 t Condition of the Baler: The baler was in operational use within a production environment, used exclusively for compacting cardboard, and serviced regularly. With only 13,209 operating hours, the machine has low mileage for its type. The baler has been partially overhauled and subsequently tested in our workshop. The following overhaul work was carried out: - Machine cleaned - Bale retaining claws freed and lubricated - Light barrier replaced - Twisting unit completely dismantled, all bearings and plastic sliding blocks replaced, lubricated, chain tension adjusted - Knife and counter-knife removed, sharpened, reinstalled - Knife gap newly adjusted - General maintenance and lubrication performed Scope of delivery: - 1 baler incl. wire reel boxes, without wire - 1 set of machine documentation Remarks: The complete documentation (operating instructions, CE declaration, electrical/hydraulic schematic) is available. Viewing possible by appointment. We accept no liability for the technical information or for possible errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, obratovalne ure: 32.169 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.320 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 750 kg, skupna masa: 22.000 kg, kapaciteta rezervoarja za olje: 900 l, For sale is a complete baling press system consisting of conveying technology, baler (partially overhauled and tested), and wire stations. Technical data (baler): Manufacturer: Bollegraaf Recycling Machinery B.V. Model: HBC 60A Year of manufacture: 2000 Operating hours: 32,169 hours (as of November 2024) Main press force: 60 t Pre-press force max.: 25 t Feed chute dimensions: 1,320 x 1,100 mm Theoretical cycle time: 18 seconds Podpfsviwdmox Adyogg Bale size: 1,100 x 720 mm, variable length Drive power: 45 kW Total connected load: 60 kW Tying: 5-fold vertical Throughput rates at a bulk density of 30 kg/m³: approx. 5.5 t/h 50 kg/m³: approx. 10 t/h 100 kg/m³: approx. 16 t/h Bale weights: 400 up to 750 kg, depending on material PLC: Telemecanique TSX Micro Baler weight: approx. 22 t Scope of supply: 1 chain belt conveyor 1 Bollegraaf HBC 60A baler with fluffing unit (wirbulator) 1 maintenance platform with access ladder 2 wire stations with guide pulleys for 10 wire reel stands (without wire) The following repair and overhaul work has been carried out: - Hydraulic oil tank drained, cleaned, and refilled with new oil - Oil filter and air filter replaced - Hydraulic block partially resealed - Hydraulic hose at the hydraulic block replaced - Wire run-in marks at the base passages welded and smoothed - Tying unit cleaned and serviced - Electrical system repaired, door interlock switches partially replaced - Fluffing unit repaired - General maintenance carried out, machine lubricated - Machine tested under power, without material, in manual and automatic mode—see function video Remarks: The system has already been completely dismantled, stored, and is ready for prompt loading. Documentation (operating manual, CE, electrical/hydraulic circuit diagrams) is available. Viewing by appointment is possible. We accept no liability for the technical specifications or any errors.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Pgjdpfxex Tznvs Adyeg Press force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 119.5 x 65 cm Condition: Very good! Functionality checked. FLITS Rental & Sales service: with every machine we supply a bundle of baling wire (120 wires). Need more bundles? Please request a free, non-binding quote. At FLITS Rental & Sales you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure you quickly have the right machine. You are very welcome to view the machines on site. Our address is: Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so we can fully inform you and show the right machines. We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste Waste processing

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6422.P01.347, teža bale: 100 kg, vrsta vhodnega toka: trifazni, moč: 7,5 kW (10,20 KM), leto zadnje generalne obnove: 2023, Stroj je priložen s celotno električno shemo. Pjdpfjxz Avusx Adyjgg

Stanje: rabljeno, Leto izdelave: 2006, moč: 5 kW (6,80 KM), NAPRODAJ! Stiskalnica je primerna za stiskanje sekundarnih surovin ter živil ali druge mokre odpadke. Leto izdelave: 2006 Pgedoycg Ifepfx Adysg Prostornina: 10 m³ Moč motorja: 5,5 kW

Stanje: rabljeno, Leto izdelave: 2009, moč: 11 kW (14,96 KM), Na prodaj ali najem: preša s postajo in dvema kontejnerjema po 30 m³ Tehnične specifikacije: Oprema: postaja za prešanje STV 1200 Letnik: 2009 Dimenzije (dolžina x višina x širina): 3.660 x 1.165 x 1.561 mm Pritisk preše: 320 kN Polnilna odprtina: 1.180 x 1.405 mm Višina tlačnega bata: 600 mm Širina izteznega bata: 1.405 mm Globina vpenjanja: 600 mm Psdpfoycgv Aox Adyegg Moč: 11 kW Postaja ima sistem hidravličnih kljuk Schott Systema+! Na novo pobarvano Kontejnerji x 2: Kapaciteta – 30 m³ Letnik – 2009 Na novo pobarvano Preša je v dobrem stanju! 1. Bat, peskan/na novo grundiran in barvan 2. Hidravlični cilindri, vsi obnovljeni in ponovno sestavljeni 3. Novi hidravlični sestavni deli, hidravlične cevi 4. Avtomatska omara je bila ponovno izbrana CENA PO DOGOVORU!

Stanje: rabljeno, Leto izdelave: 2012, moč: 5 kW (6,80 KM), NA VOLJO ZA PRODAJO ALI NAJEM: STISNJEVALNI KONTEJNER! STISNJEVALNI KONTEJNER LM10ASG LETO IZDELAVE – 2012 MOČ – 5,5 kW KAPACITETA – 10 m² CENA NA POVPRAŠEVANJE! Pedoycgmhopfx Adyegg

Stanje: rabljeno, Leto izdelave: 2006, moč: 5 kW (6,80 KM), NA PRODAJO/NAJEM Stiskalnica je primerna za stiskanje sekundarnih surovin ter živil in druge mokre odpadke. Pgjdpsycghxjfx Adyjg Leto izdelave: 2006 Volumen: 18 m³ Dimenzije zabojnika (D x Š x V): 5800 x 2500 x 2550 mm Višina polnjenja brez koles: 1540 mm Kompatibilnost: 370 kN Moč motorja: 5,5 kW

Stanje: rabljeno, Leto izdelave: 2016, moč: 7 kW (9,52 KM), Naprodaj/najem stiskalna postaja STV1000 z enim kontejnerjem 30 m3! Tehnične specifikacije za stiskalno postajo: Stiskalna postaja STV1000 Leto izdelave: 2016 Dimenzije (dolžina x višina x širina): 3360 x 1165 x 1561 mm Pritisna sila: 300 kN Polnilna odprtina: 1180 x 1405 mm Moč: 7,5 kW KONTEJNER: Kapaciteta/volumen – 30 m3 Leto izdelave: 2016 Psdpfoycf Spex Adyjgg CENA PO POVPRAŠEVANJU!

Stanje: rabljeno, Leto izdelave: 2002, stiskalna sila: 115 t, moč: 150 kW (203,94 KM), Naprodaj: Horizontalna balirka Paal Konti 425 D Tehnične specifikacije: Proizvajalec: Paal Tip: Konti 425D Podpfxeycf R Sj Adyegg Leto izdelave: 2002 Velikost dovodne odprtine: 102 x 200 cm Pogonska moč: 2 x 45, 2 x 75 kW Tlačna sila: 115 t Nastavitve: Horizontalno, popolnoma avtomatsko Teža bale: 550-850 kg Stiskalna teža: 36 t CENA PO POVPRAŠEVANJU!

Stanje: rabljeno, Leto izdelave: 2007, moč: 7 kW (9,52 KM), POKONČNA PREŠA ZA BALE NAPRODAJ ALI NAJEM! (Najem na voljo v Litvi, Latviji, Estoniji in na Poljskem) Pgedpsycfxcofx Adysg Tehnične informacije: Proizvajalec: HSM Model: HSM 500 VL Pritisna sila: 54–540 kN Velikost bale: 1200 x 800 x 1200 mm Teža bale: pribl. 500 kg Maks. velikost bale: pribl. 1.200 x 800 x 1.200 mm (Š x D x V) Dimenzije tlačne komore: 1.200 x 800 x 1.520 mm (Š x D x V) Motor: 7,5 kW Leto izdelave: 2005 CENA PO POVPRAŠEVANJU!

Stanje: rabljeno, Leto izdelave: 1994, stiskalna sila: 40 t, moč: 22 kW (29,91 KM), Horizontalna balirka za PRODAJO/NAJEM BAUER 300 Balirka je v dobrem delovnem stanju (uporabljena je bila v tiskarni)! Tehnične specifikacije: Namestitev balirke za sekundarne surovine Proizvajalec: BAUER Model: 300 Leto proizvodnje: 1994 Moč: 22 kW Kledex Dk S Asm Aty Atjl Stiskalna sila: 40-50 t Dimenzije balirke: 10.300 x 2.000 x 3.000 mm Teža nagibanja: ~400 kg CENA NA POVPRAŠEVANJE! Pgjdpeycfv Iofx Adyog

Stanje: rabljeno, Leto izdelave: 1995, stiskalna sila: 85 t, moč: 170 kW (231,14 KM), Baler PAAL KONTI 425 C Tehnične specifikacije: Proizvajalec: Paal Tip: Konti 425C Letnik izdelave: 1995 Vstopen odprtina: 102 x 175 cm Podpfjycfuqsx Adyegg Pogonska moč: 170 kW Sila stiskanja: 85 t Nastavitve: Horizontalno, popolnoma avtomatsko Teža zvitka: 500-650 kg Teža preše: 25 t CENA PO DOGOVORU!

Stanje: rabljeno, Leto izdelave: 1995, moč: 2 kW (2,72 KM), Vertikalni balirni stroj HSM 45 VL na PRODAJO/NAJEM! Proizvajalec: HSM Tip: 45 VL Letnik proizvodnje: 1995 Skupaj na voljo: 8 kosov. Prodajna cena: 1200 EUR/kos (exw Litva) Pjdpoycfhkjfx Adysgg

Stanje: dober (rabljeno), Leto izdelave: 1994, stiskalna sila: 50 t, moč: 22 kW (29,91 KM), Prodajamo balirko BAUER 400 Pgjdeycd N Tspfx Adyeg Tehnične specifikacije: Namestitev stiskalnice za reciklažo Proizvajalec: BAUER Model: 401 Letnik izdelave: 1994 Moč: 22 kW Pritisk stiskanja: 40-50 t Dimenzije: 10300 x 2000 x 3000 mm Teža pri kipanju: ~400 kg CENA NA POVPRAŠEVANJE!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 09-BE000590-04, skupna širina: 1.700 mm, skupna dolžina: 1.400 mm, skupna višina: 2.200 mm, skupna masa: 860 kg, vrsta vhodnega toka: trifazni, dolžina polnilne odprtine: 990 mm, širina odprtine za polnjenje: 670 mm, moč: 22 kW (29,91 KM), vhodna napetost: 380 V, Description Bergmann PS8100 Mini Compactor Machine number: 09-BE000590-04 Year of manufacture: 2004 Own weight: 860 kg Delivered with a one-year valid NEN certificate and a maintenance service. Includes 2 rolls filled with plastic bags for cardboard waste. Dimensions: Serial number: 09-BE000590-04 Motor power: 2.2 kW 5.1A Required space: 1400x1700x2200mm Large filling opening: approx. 990x670 mm General information Configuration: Mini compactor Pgsdpfxsu H Uwpe Adyog Year of manufacture: 2004 New: No Condition General condition: Good Technical condition: Good Optical condition: Very good Financial information VAT: The displayed price is excluding VAT VAT/margin: VAT deductible for businesses Company information All our prices are excl. VAT We always have machines in stock. No transport? No problem, we have our own truck.

Stanje: rabljeno, Leto izdelave: 1994, stiskalna sila: 30 t, LIKON 200C Horizontal Ballenpresse Technische Daten: Motorleistung – 22 kW Baujahr – 1994 Mit Ölkühler Horizontale Bindung, 4-fach Presskraft – 30 t Gesamtabmessungen der Presse: 10.000 x 2.000 x 2.750 mm Eigengewicht der Presse: 10 t Abmessungen der Einfüllöffnung: 1.400 x 700 mm Ballenabmessungen – 700 x 1.100 x 1.000–1.200 mm (Länge variabel) Mit Hydrauliköl Pgjdpfeyb Ndaox Adyeg Ohne Bindematerial Die Presse arbeitete in einer Druckerei ohne Förderband, ausschließlich mit trocken geschredderten Druckabfällen! Betriebsstunden: 62.639 Die Presse befindet sich in gutem Zustand und ist sofort einsatzbereit. PREIS AUF ANFRAGE!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, moč: 11 kW (14,96 KM), Novo proizvedena 2021. godine, instalirana, ali nikada nije pokrenuta/nekorišćena/oprema kao nova! SCHNECKPRESSSTATION SA 2 KOMADA BOXOVA PC6500 NA PRODAJU! Tehnički podaci: Ukupna dužina: 2480 mm Ukupna širina: 1660 mm Ukupna težina: 2300 kg Visina utovara: 1350 mm Dimenzije ulaza: 1375 x 1490 mm Prečnik puža: 750/500 mm Brzina puža: 17 o/min Pogonska snaga: 11 kW Godina proizvodnje: 2021, uređaj nije korišćen! Pedpsyb Haljfx Adyogg Pres stanica sa Schneck sistemom +KEV (dovod/odvajanje kartona, grubi usitnjivač, odgovara KZK, ali snažnije izvedbe) CENA NA UPIT!

Stanje: rabljeno, Leto izdelave: 2006, moč: 11 kW (14,96 KM), PRODAJAMO ALI ODDAMO V NAJEM PREŠNO POSTAJO S POLŽASTIM SISTEMOM IN ENO ENOTO KAPACITETE, PRIMERNO ZA STISKANJE SEKUNDARNIH SUROVIN! PROIZVAJALEC – PRESTO GmbH (Nemčija) Tip: SPN15 Leto izdelave – 2006 KAPACITETA – 30 m³ Moč – 11 kW Pgodpfjyb D A Dox Adyeg Ta sistem oddajamo v najem v Litvi, Latviji, Estoniji in na Poljskem! CENA PO POVPRAŠEVANJU!

Stanje: dober (rabljeno), Welger Type: RC 660 Roll Compactor with Bridge Extraction Compact and fully automatic Exclusively designed for the production of pressed bales from low-density packaging materials. Application Variants Materials to be processed Paper edge trims (strips and continuous) Paper and film bags PP film edge trims Film strips Garment protective film (PP/PE films) Pgedpfx Adjdtxbioysg PP/PE fibre material Insulation and nonwoven materials Foam grids Packaging foam Tetra Pak cartons Dimensions: 2100 mm (L) x 940 mm (W) x 1755 mm (H) Feed hopper dimensions: 330 mm x 600 mm Max. bale size: 400 mm x 600 mm Bale weight: 20 – 30 kg depending on material Compaction density: 250 – 400 kg/m³ depending on material Throughput / daily output: 30 bales per day Feed rate: 0.36 m/s RC 660 3x 400V, 50Hz, 16A 2.2 kW, 5.0A Weight: 700 kg Bridge Extraction System Model: KFA Size: 60-30-3000 Airflow: 6,000 m³/h Motor power: 0.3 kW Filter area: 30 m² Vacuum: 3,100 Pa Condition: used Scope of delivery: (See photo) (Specifications and technical data may be subject to change and errors!) For further questions, feel free to contact us by phone.

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Vertical baling press HSM VL 600, year of manufacture 2002 Technical data: Manufacturer: HSM Model: HSM VL 600 Year of manufacture: 2002 Pressing force: 60 t Drive power: 7.5 kW Cycle time (idle): 37 s Filling height: 1130 mm Filling opening: 1150 x 735 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Weight: 3575 kg Materials processed: paper, cardboard, film The press is in good condition and has been inspected and tested. A video can be found on our website or YouTube channel. The operating manual and CE declaration are available. Inspections, including live demonstrations, are possible at any time by prior arrangement. Upon request, we can also conduct test runs with your material for a service fee. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday between 08:00 and 14:00, and on Friday from 08:00 to 13:00. Please note: All technical data are based on the manufacturer’s information. We accept no liability for the stated details or possible errors. This offer is subject to change, prior sale reserved, and may be withdrawn at any time. Inspections are possible by prior arrangement. Pedpfx Adsx Iryrsyjgg Sale ex works, advance payment required, without warranty or guarantee.

Stanje: rabljeno, Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, Bale Press Paal Pacomat II with Hopper, Year of Manufacture 1979 Technical Data: Manufacturer: Paal Model: Pacomat II Year: 1979 Drive Power: 11 kW Pressing Force: 27 t Channel Cross Section: 700 x 1000 mm Feed Opening: 1000 x 650 mm Throughput: approx. 60/115 m³/h Bale Size: 700 x 1000 mm Bale Weight: up to 400 kg Machine Dimensions: approx. 7000 x 2000 x 2000 mm (LxWxH) Machine Weight: approx. 5200 kg Materials: Paper, Cardboard, Film Remarks: The machine is in working condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find the video on our website or on our YouTube channel. Inspections, including under power, are possible at any time by prior arrangement. Upon request, we can also carry out tests with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00. On Fridays we are available from 08:00 to 13:00. Please note: Pgodpfx Aox Irvaedyog All technical data is based on manufacturer information. We accept no liability for the information provided or for any errors. Offers are non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by prior arrangement. Sale is ex location, without warranty or guarantee. Our payment term is 100% advance payment.

Stanje: novo, Novi in rabljeni briketirni stroji. Potrebujete stiskalnico za brikete? Kontaktirajte nas. Imamo dolgoletne izkušnje s stroji za briketiranje materialov kot so les, biomasa, papir in drugo. Več kot 20 let izkušenj. Stiskalnice za okrogle ali pravokotne brikete. Pjdpfox S Ii Rox Adyogg Dostava po celotni EU. Zmogljivost od 20 do 400 kg na uro.

Leto izdelave: 2010, Stanje: dober (rabljeno),

Stanje: dober (rabljeno), Europress CK. Pritisk stiskanja 30 t. Teža bale 280–320 kg. Pgsdpfx Aeycw Ebsdyeg