Sod Tiska nakup rabljenega (12.490)

Stanje: zelo dobro (rabljeno), Profesionalna ročna stiskalnica Harting – model , namenjena za kontakte HAN D. Uporablja se v industrijski avtomatizaciji, elektrotehniki in nizkonapetostnih inštalacijah. • Obseg vodnikov: 0,14 – 2,5 mm² (AWG 30–13) • Prilagojena za stiskanje kontaktov: HAN D 0,5 mm² in 1,0 mm² • Sila stiska: 60–108N, odvisno od premera vodnika • Katalogski številki kontaktov: 73300-200 in 73300-201 • Ergonomski ročaji, natančno delo • Oznake na glavi: 0,14 / 1,0 / 1,5 / 2,5 mm² • Originalno industrijsko orodje – Made in Germany. Stanje: zelo dobro – popolnoma delujoče, pripravljeno za nadaljnjo uporabo. Hnodpfxow Su Nco Af Teg

Stanje: rabljeno, Leto izdelave: 1991, Pression 125 t Distanța între stâlpi 2100 mm Cursă 1000 mm Înălțime de montare 1300 mm Suprafața mesei 2230 x 1300 mm Forță pernă de tragere 63 t Cursă pernă de tragere 60 mm Suprafața pernei de tragere 1000 x 900 mm Înălțime masă deasupra pardoselii 1050 mm Suprafața ștampilei 2100 x 1000 mm Viteză coborâre 50 mm/sec Viteză ridicare 50 mm/sec Viteză de lucru 10 mm/sec Volum ulei 410 l Putere acționare 22,0 kW Greutate 31,0 t Dimensiuni aprox. 3,1 x 1,7 x 5,95 m Hnodpfsvut D Tox Af Tjg Presă de probă hidraulică Aprobată pentru încărcări manuale conform normelor germane de prevenire a accidentelor (UVV) Cu acționare hidro-oleică, control dependent de presiune/timp și cursă, pernă de tragere hidraulică în masă, blocare a ștampilei, operare cu două mâini Nu necesită groapă de fundație Poate fi oferită nepusă în funcțiune, pusă în funcțiune în starea dată sau opțional cu nouă comandă Siemens S 7-1500 F.

Leto izdelave: 2025, Stanje: novo, Rated capacity 3000 kg/h (depending on fruit type & operating conditions up to 6000 kg/h possible) Yield up to 75% Belt width/length: 1000 mm / approx. 7000 mm Working width/height: 900 mm / 0–50 mm, continuously adjustable Belt speed continuously adjustable: 1.0–5.2 m/min Electrical connection: drive motor 2.2 kW 400V Washing arm motor 0.25 kW 400V Water consumption: 3 l/operating minute Weight: approx. 2300 kg Dimensions LxWxH: 2750x1890x1690 mm without high-pressure cleaner and without compressor Hjdjygmwspfx Af Teng

Stanje: rabljeno, Leto izdelave: 1991, Pressure 300 t Column gap 1350/1000 mm Stroke 500 mm Machine weight approx. 20 t Table area 1900x1600 mm Hnjdpfxsvn U S Se Af Tog Ram area 1900x1600 mm Table height 1000 mm Stroke and pressure shut-off Working feed 10 mm/s

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen,

Leto izdelave: 1981, Stanje: skoraj kot novo (rabljeno), Used hydraulic (triple-acting) deep drawing press LAUFFER 400t. The press has already been dismantled and is in excellent condition, as it has been used very little. Technical Data: Year of manufacture: 1981 Press force in t: 400 Height above floor in mm: 5940 Stroke in mm: 800 Table dimensions (LxW) in mm: 1600 x 1300 Ram dimensions (LxW) in mm: 1500 x 1300 Installation space in mm: 850 Upper ejector stroke in mm: 160 Upper ejector force in t: 6.3 Lower ejector stroke in mm: 200 Lower ejector force in t: 12 Hedpjd Ntd Dofx Af Tjng Total power in kW: 150 Overall dimensions (LxWxH) in mm: 3550 x 1200 x 5940 Total weight in kg: 50,000

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Z293-068, skupna višina: 3.800 mm, skupna širina: 4.000 mm, skupna dolžina: 5.000 mm, širina mize: 1.500 mm, dolžina mize: 2.500 mm, RASTER ZEULENRODA GHP 400 H/K-08 preskusna stiskalnica, leto izdelave 2004 TEHNIČNI PODATKI IN OPREMA: Tovarniška številka: Z293-068 Obratovalna napetost: 400 V Frekvenca: 50 Hz Krmilna napetost: 230 V Hjdpfxjw Rggwe Af Tong Priključna moč: 240 kW Nazivni tok: 100 A Hidravlični pritisk: 320 bar Nazivna sila: 2 x 2000 kN Dimenzije mize: 2500 x 1500 mm Izteg konzol proizvajalca HILMA: 1600 mm Vključno s CNC krmiljenjem ter hladilno napravo in filtrom za izsesavanje REFERENČNA ŠTEVILKA 138 MERE IN TEŽA: 5000 x 4000 x 3800 mm 32000 kg OPOMBE O ODVOZU: Artikel je na voljo od oktobra 2025. Termin za prevzem je treba uskladiti na določen datum med 20.10.2025 in 31.10.2025 FCA: 59759 Arnsberg (DE), naloženo na tovornjak

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0319, Pressure: 125 t Passage width: 1000 mm Stroke: 500 mm Machine weight approx. (without operating fluids): 6 t Dimensions (L x W x H): 2540 x 933 x 3000 mm Retracting force: 12 t Max. working height: 700 mm Return speed: 25 mm/sec Ram plate: 600 x 1300 mm Table plate: 600 x 1300 mm Table height above floor approx.: 850 mm Oil cooling (electric): 1.5 kW (max) Motor power: 11 kW Approach speed: 10 mm/sec Pressing phase speed: 10 mm/sec Oil tank: 250 l Rapid traverse speed: 10 mm/sec Hsdpsfxykpefx Af Tsng Column diameter: 120 mm Operating principle of the tool testing press: 1. The main switch is activated by turning. 2. Then, the press lighting should be switched on. 3. The tool is placed into the pressure center of the press. If the tool requires greater force off-center (e.g., with combination tools where the first station punches thick sheets while subsequent stations only carry out fine work), it may be necessary to shift the tool slightly to the left or right so that the counterforce from the material acts as centrally as possible on the ram. 4. The lower tool is bolted to the press table, and the upper tool is then lowered. 5. To do this, switch on the pump at the control cabinet. The fall protection then releases the ram. 6. A slow pull on the control lever starts the downward movement. The more you pull, the faster the press operates. For safety reasons, the maximum downward speed is limited to 10 mm/sec. 7. The pressing force is set via a rotary knob, located to the right near the manual control lever. 8. After the ram reaches the upper tool, it is attached to the ram. 9. Any transport locks are removed if present, then the press is opened by pressing the manual lever. The speed of the upward movement can be continuously adjusted from 0 to 25 mm/sec using the manual lever.

Stanje: rabljeno, Sodček 800 l, za proizvodnjo pijač, na voljo več kosov. Hsdpjwun Ncsfx Af Tsng

Stanje: rabljeno, Leto izdelave: 1998, Pressure 40 t Stroke 250 mm Total power requirement 6 kW Machine weight approx. 3 t Frame/gap width 600/350 mm Table surface 860x620 mm Hnedpfx Afovnwfns Tjg Ram surface 860x620 mm Table height 900 mm Manual lever operation Pressure cut-off

Stanje: skoraj kot novo (rabljeno), Set, packed in wooden box, screw and cylinder barrel for 150 mm extruder, grooved feed section, screw with shear and mixing section Hedpfx Afodm Aghe Tsng

Stanje: dober (rabljeno), Obel Pedersen High-Frequency Throughfeed Belt Press Opel-Pedersen Press Type 2412 Pressing length: 2,500 mm, width: 600 mm with glue application system, lay-up table, HF generator T20 V and water cooling Hjdpfjdybr Rex Af Tong The system has been dismantled.

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, širina mize: 620 mm, dolžina mize: 750 mm, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Rok plačila za stroj je 20.11.2025! Oddaja ponudbe vas zavezuje k pravočasnemu prevzemu med 01.12.2025 in 05.12.2025! TEHNIČNI PODATKI Prostornina: 180 l Tlačna sila: 100 kg Dimenzije mize: 750 x 620 mm PODROBNOSTI STROJA Priključna moč: 7,5 kW Dimenzije in teža Dimenzije (D x Š x V): 1.500 x 1.200 x 2.900 mm Hedpfoxniw Esx Af Tsng Teža: 4.250 kg

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0325, Pressure: 40 t Passage width: 1000 mm Stroke: 400 mm Approx. machine weight (without operating fluids): 3.5 t Dimensions (L x W x H): 2065 x 700 x 2905 mm Retracting force: 4 t Max. working height: 700 mm Return speed: 25 mm/sec Ram plate: 1320 x 600 mm Table plate: 1320 x 600 mm Table height above floor approx.: 750 mm Oil cooling (electric): 1.5 kW (max) Motor power: 8 kW Feed speed: 10 mm/sec Pressing speed: 10 mm/sec Hnedpfx Afjfxykwe Tjg Oil tank: 200 l Rapid traverse speed: 10 mm/sec Column diameter: 100 mm Hydraulics and tank mounted on top of the press: 2400 ? All-round maintenance platform: 3600 ? Siemens S7 1200: 4600 ? Drip tray made of painted steel: 850

Leto izdelave: 1999, Stanje: dober (rabljeno), We are selling the membrane press for kitchen doors or door frames, etc. Hnedpfx Aod Ew Tbsf Tjg Manufacturer: Italpresse, Model: Form Air. Year of manufacture: 1999. Working area: 2330 x 780 mm. Inspection possible. Complete documentation included.

Stanje: skoraj kot novo (rabljeno), ELBOR MAG - Žična elektroda Tip SG-3 Stanje: Kot novo Hnsdpsxbfnyjfx Af Tsg EN ISO 14341-A- (2011) G 46 4M21 4Si1/G42 3C1 AWS A5.18-05: ER70S-6 Premer 1,0 mm Sod 250 kg Okoli 230 kg še na voljo v sodu

Stanje: generalkompletno obnovljen (rabljeno), The EGLI 1700 butter churn has a capacity of 900 liters of cream with a butter yield of 60%. All product-contact surfaces are made of 316L stainless steel. The gearboxes and motors are coated with painted metal. The machine has seen little use since a complete overhaul in 2022. Equipped with a new control panel for starting the machine. Hnjdpfsx Nca Esx Af Tsg Churn: EGLI Model: 1700L total capacity Cream capacity: 850L Serial number: DM1700UK Condition: Refurbished Available: Immediately Location: In stock

Stanje: rabljeno, Pressione: 600 TON Punti di pressione: n°2 Modello: AF 600 MB 30-60 Anno di costruzione: 1994 Dimensioni piano di lavoro: 3.000 x 1.600 mm Dimensioni slitta: 3.000 x 1.600 mm Luce frontale: 3.000 mm Luce laterale: 1.200 mm Regolazione slitta: 150 mm Colpi al minuto: 20 c/min Corsa: 500 mm Apertura stampo a PMI: 1.118 mm Potenza motore principale: 30 kW Hnsdpfxeq N Ettj Af Tjg Sistema di sicurezza idraulica: presente Peso: 110 ton

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Z293-068, skupna masa: 32.000 kg, širina mize: 1.500 mm, dolžina mize: 2.500 mm, stiskalna sila: 407 t, vrsta upravljanja: CNC krmiljenje, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Rok plačila za stroj je 20.11.2025! Ponudba velja kot zaveza za prevzem med 01.12.2025 in 05.12.2025! TEHNIČNI PODATKI Širina mize: 1.500 mm Dolžina mize: 2.500 mm Hnsdpfx Afexm R S Is Tjg Hidravlični tlak: 320 bar Nazivna sila: 2 x 2.000 kN PODATKI O STROJU Električni podatki Obratovalna napetost: 400 V Frekvenca: 50 Hz Krmilna napetost: 230 V Priključek: 42 kW Nazivni tok: 100 A Dimenzije in teža Dimenzije: 5.000 x 4.000 x 3.800 mm Teža: 32.000 kg OPREMA CNC krmiljenje Hladilna naprava Filtrirna odsesava HILMA izhod konzol (1.600 mm)

Stanje: novo, Leto izdelave: 2018, številka stroja/vozila: DF0199 - Rev.00, Pressure: 160 t Passage width: 1200 mm Hodsdxvfhjpfx Af Tong Stroke: 600 mm Machine weight approx. (without operating materials): 7 t Dimensions (L x W x H): approx. 2400 x 1400 x 3400 mm Return force: 16 t Max. working height: 800 mm Return speed: 25 mm/sec Ram plate: 1670 x 800 mm Table plate: 1670 x 800 mm Table height above floor approx.: 800 mm Oil cooling (electric): 1.5 kW (max) Motor power: 18 kW Advance speed: 10 mm/sec Pressing speed: 10 mm/sec Travel distance: 600 mm Oil tank: 300 l

Stanje: novo, Leto izdelave: 2024, MOBIL 2500 Hjdpfsyuv Tsx Af Tong Mobile Pneumatic Edge Press for Furniture Manufacturing! Technical Data MOBIL Type 2500 (Type 3000): > Sturdy welded-frame construction made from rectangular hollow sections with stop and straightening guide, suitable for solid wood, veneer, and plastic edges. > Integrated electric heating rod made of durable AL alloy, cross-section 64 x 46 mm, adjustable from 50 - 248°C, power 1200 (1450) watts. > 4 (6) clamping and pressing units, each with 7-fold ball bearing guidance. Each pressing unit features one clamping and one pressing cylinder; gluing width adjustable via moveable straightening guide from 12 - 105 mm. Edging thickness up to 50 mm for solid wood edges. > Adjustable counter-stops ensure precise edge overhang. > The clamping cylinders and counter-stops are equipped with rubber pads. The stop and straightening guide have a special glue-repellent coating. > The pneumatic pressing units can always be actuated in pairs, with one switch for 'clamping the workpiece' and one switch for 'pressing'. > Press is mobile with 4 swivel casters, 2 of which are braked. > The press is equipped with a pneumatic maintenance unit, 3/8" connection, adjustable from 3-10 bar. Electrical connection for heating rods is 230 V, 50 Hz, 1200 (1450) watts. Usable dimensions W x H x D in mm: 2500 x 50 x 105 External dimensions W x H x D in mm: 2700 x 1200 x 850 Additional options and accessories for MOBIL available on request! Packaging: €92

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Hydraulic Horizontal Straightening and Bending Press - Manufacturer: ZOPF Hnjdpfx Ajdk H A Ijf Tsg - Model: T500 with 1500 mm long straightening beam - Press force: 50 tons - Semi-automatic control system (99 programs, each with up to 16 steps) - Includes bending pins (without punch) - Includes tool holder for dies and foot pedal - Infinitely variable stroke adjustment: 0–300 mm - Adjustable working speed Working stroke max. 10 mm/sec. Return stroke: 20 mm/sec. - Adjustable hydraulic pressure - Maximum tool height: 300 mm - Motor power: 5.5 kW - 400 Volt, 50 Hz, 3 phase - Working height: 900 mm - Enclosed table - Interchangeable wear plate - Weight: 1300 kg - Bending capacities: Flat material: 300 x 15 mm Flat on edge: 60 x 15 mm Round tube: 3/8"–2 1/2"

Stanje: rabljeno, Leto izdelave: 1998, številka stroja/vozila: 101486, Vertical Press Delivery Heidelberg VSA-66.D+MK, Year 1998 – Serial-No. 101486/98-256505 Working width max. 660 mm Hedpoh Ayfwofx Af Tsng Marking Device included Online video inspection via Skype video available We would be very pleased to welcome you for an inspection – more machines available in stock Available immediately – can be inspected Located in Emskirchen/Nuremberg – Test runs possible

Stanje: novo, Leto izdelave: 2018, številka stroja/vozila: DF0163, Pressure: 800 t Clear width between uprights: 1200 mm Stroke: 500 mm Total power requirement: 85 kW Approx. machine weight: 40 t Dimensions L x W x H: 4100 x 3500 x 6650 mm Return force: 80 t Main cylinder: 1 piece Column diameter: 250 mm Installation height (distance between bolster and ram plate with cylinder fully retracted): 1000 mm Table size: 1300 x 1100 mm Ram area: 1300 x 1100 mm Ram height: 800 mm Table height above floor approx.: 950 mm Max. table load: 5 t Hjdpfx Afedxvfpo Teng Approach speed: 250 mm/sec Return speed: 150 mm/sec Oil tank: 1000 l Working speed at start: 10 mm/sec Hydraulics and tank mounted on top of press: included? All-round maintenance balcony: included? Side panels: included? Light barriers front and rear: included? Right side monitored door: included (800 x 530 mm)? Left side monitored door: included (800 x 530 mm)? Electrical oil cooling and thermal insulation for ram and table by a 30 mm thick insulation plate Table deflection according to DIN max. 0.2 mm Ejector force: 150 t Ejector stroke: 200 mm Ejector speed: 70 mm/sec

Stanje: kot nova (razstavni stroj), Leto izdelave: 2018, Pressure: 110 t Passage width: 1500 mm Stroke: 650 mm Total power requirement: 15 kW Approx. machine weight: 11 t Dimensions L x W x H: approx. 2640 x 3200 x 3650 mm Return force: 11 t Column diameter: 120 mm Max. working height: 1000 mm Table size: 1990 x 1000 mm Ram size: 1990 x 1000 mm Ram travel: 650 mm Table height above floor: approx. 800 mm Approach speed: 10 mm/sec Pressing speed: 10 mm/sec Hnjdpfx Afofhcc Ts Tjg Oil tank: 200 l Oil cooling (electric): 1.5 kW (max)