Sod Tiska nakup rabljenega (5.272)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 208053, barvni kanali: 4, Heidelberg SM 52-4 Anicolor, CP2000, Alcolor. Letnik 2007, serijska številka 208053, število odtisov: 34.790.000. Stroj je optično in tehnično brezhiben, redno vzdrževan in v proizvodnji – možen preizkus. Ijdpfox Svnhox Af Toht

Stanje: dober (rabljeno), Leto izdelave: 1996, Locker box - canister Year approx. 1996 Ihedpfxedqb Ahj Af Tot Single compartment

Stanje: rabljeno, Bito MBD 43 večkrat uporabna transportna škatla, rabljena 🧰 Lastnosti izdelka • Proizvajalec: Bito • Material: plastika (PP) • Stanje: rabljeno • Barva: oranžna • Prostornina: 13 l • Dolžina: 41 cm • Širina: 30 cm • Višina: 20 cm • Nosilnost: 14 kg • Oblikovno obstojna: da • Zložljiva ena v drugo: da • Na voljo le še brez pokrova! Isdpfx Afourkrxo Tsht 💰 Cena € 4,- neto, brez DDV • Količinski popust: na zahtevo • Stroški pošiljanja: po vsej Evropi na zahtevo • Dobava: takoj na voljo • Ogled in prevzem: kadarkoli po dogovoru Stalno na zalogi več kot 5000 tm paletnih regalov različnih proizvajalcev (Spremembe in napake v tehničnih podatkih, informacijah in cenah ter vmesna prodaja pridržani! Glejte naše splošne pogoje, vse cene brez DDV iz skladišča.)

Stanje: rabljeno, Leto izdelave: 1994, obratovalne ure: 27.436 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 6915, stiskalna sila: 80 t, širina mize: 500 mm, dolžina mize: 700 mm, skupna masa: 6.500 kg, širina plošče bata: 400 mm, dolžina plošče bata: 500 mm, tabela razdalj do bata: 500 mm, hod: 300 mm, kapaciteta rezervoarja za olje: 485 l, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, Ponujamo rabljeno hidravlično stiskalnico HYDRAP PRESSEN HPSK80, letnik 1994. Proizvajalec: HYDRAP PRESSEN Model: HPSK80 Letnik: 1994 Stanje: rabljeno Iedpfx Afox Ti Aus Tjht ID kategorije: 1330 ID tipa: 1231 Vrsta stroja: hidravlična stiskalnica Za vprašanja ali dodatne informacije nam pošljite sporočilo ali nas pokličite.

Stanje: novo, Electric Heated Platen Press SCM Model: gs 6/90 30-13 Offer Type: New machine Technical Data: Dimensions of heating platens: 3000 x 1300 mm Number of platens: 2 pcs Maximum temperature of platens: 120°C Recommended operating temperature of platens: 90°C Number of press cylinders: 6 pcs Hydraulic pump motor power: 3.0 kW, 400 V, 50 Hz Pressing force: 90 t (900 kN) Diameter of press cylinders: 70 mm Number of levels: 1 Daylight opening (approx.): 400 mm Connected load: 26.0 kW, 400 V, 50 Hz Heating Platens: Electrically heated aluminium sandwich platens from ELKOM, Germany. Continuously adjustable up to max. 120°C, up to 150°C on request. Thermal insulation towards the press frame. Ihedpfofh Tmmjx Af Tjt Platens are mounted with special brackets to allow for necessary thermal expansion. Hydraulics: Compact hydraulic pump, integrated in the press frame, from HAWE Germany. 2-stage design for closing and pressure build-up phase. Hydraulic cylinders made of high-quality, tempered and ground steel with large diameter. Press Frame: The press frame is a heavy-duty, torsion-resistant, stress-relieved welded steel construction. Presses of the gs series can be loaded from all four sides. Press tables are constructed from welded HEA profiles. Precision machining of the assembly components is done on state-of-the-art CNC machines. Uniform and precise movement of the press table is ensured by rack-and-pinion and self-lubricating slide guides on 2 corners of the frame. Control: Side-mounted control panel with SIEMENS 7'' colour touchscreen Proprietary SCM software enables simple, intuitive operation. The following parameters can be programmed, called up, and changed: - Automatic calculation of maximum allowable hydraulic press pressure based on workpiece size. - Storage of up to 100 programs (temperature, specific pressure, pressing time, platen size) possible. - Direct hydraulic pressure setting. - Internet connectivity for remote maintenance service. - Electronic control of pressing time - Electronic monitoring of platen temperature - Automatic pressure recovery - Complete diagnostics and fault display with messages on the screen OPTIONAL EXTRAS: - Electronic flatness control (misfeeding monitoring) - MYLAR film for protection and easy cleaning of the electric platens - Surcharge for 120 t press force - ELKOM platens with gold anodising finish

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 700 h, Funkcionalnost: popolnoma funkcionalen, The ISM 98HT pneumatic hot stamping machine for finished shoes can be used to stamp the company logo and numbering onto the sole of the finished shoe, boot, or sandal prior to packaging. This machine ensures high-quality stamping thanks to its automatic systems: - Set-up of all machine parameters via a fast and intuitive touchscreen keyboard (Omron). - Automatic setting of logo penetration depth in millimeters on the material. - Setting stamp temperature, stamping time, and colored ribbon feed in millimeters through the touchscreen keyboard (Omron). - Stamp descent cylinder (1.5 tons of force) with mechanical end stop. - Stamp holder with No.6 slots, rotatable 360°. - LED light optical projector. TECHNICAL DATA: Dimensions: 75 x 75 x h 210 cm. Net weight: 300 kg. Compressed air: 8 bar. Voltage: 400V, 50–60 Hz. Productivity: 200 pairs/hour. Ihsdpfxjyaq Uqj Af Tjt This MACHINE is being sold because the process is no longer performed in-house. The machine was purchased for a temporary activity (4 months), therefore its condition is nearly new.

Stanje: novo, Leto izdelave: 2025, Press brake from the one and only genuine and reliable manufacturer PROD MASZ® The manufacture of modern press brakes is our passion, which we would like to share with you. At trade fairs, we share our expertise and attention to detail regarding our bending machines, which continuously improves our press brakes while never forgetting who we really work for. The quality of our press brakes is of the utmost importance to us. Directly from manufacturer Prod-Masz! Brand-new, fully equipped machine straight from current production. Technical specifications: - Maximum working width: 3140 mm - Bending capacity: up to 0.8 mm (steel sheet) - Bending angle: max. 145 degrees - Bending beam thickness: 24 mm - Weight: approx. 400 kg - Rotary shear (max. cutting capacity up to 0.8 mm / steel sheet) - The machine complies with CE regulations and comes with a 12-month warranty. - Delivery cost: €300.00 Ihsdpfxscttgfs Af Tet Rotary shear 0.8mm – plus €350 Hand seam folder plus €75 Payment in cash upon delivery Delivery: weekly We look forward to hearing from you! Invoices are issued with 0% VAT as an intra-community supply or plus 19% VAT where applicable.

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 100 h, Funkcionalnost: popolnoma funkcionalen, število kartuš s črnilom: 4, MGI Meteor DP8700 XL Plus z iFoilom in podajalnikom za kuverte, zelo malo rabljen Ihsdpjxcup Nefx Af Tot

Stanje: rabljeno, Leto izdelave: 1998, Pressing force 3500 t Stroke 900 mm Distance between table and ram, stroke down 1000 mm Distance between table and ram, stroke up 1900 mm Table size 3150 x 2150 mm Ram size 3150 x 2150 mm Max. total tool weight 30.0 t Max. upper tool weight 20.0 t Speed from 400 mm/s Working speed 0.9 – 9.2 mm/s Ihsdpfxsvuukhe Af Tjt Hydraulic operating pressure 280 bar Oil capacity 5500 l Rated current 760 A Voltage 400 V Frequency 50 Hz Drive power 425 kW Weight 231.0 t Hydroforming press / IHU press / Internal high-pressure forming press Maximum preforming force approx. 1000 t Total tool weight approx. 30 t Upper tool weight approx. 20 t · Tool function interface: 4 controlled axes, 3 ON/OFF functions ram, 4 ON/OFF functions table · Parallelism control: along the longitudinal side of the press · Light curtain: front and rear · Light barrier: left and right side · Ram locking in upper position · Two-hand operation panel: 1 · Independent high-pressure water hydraulic circuit: 2 · Max. operating pressure: 3,000 bar · Displaced volume per pressure intensifier: 3.74 l · 2 filling pumps: volume and pressure dependent on the power network · Location of pressure intensifier: to be determined · Main pumps: located on the press head/oil tank · Tool changing table: 6.7 x 2.15 m · Max. tool size: 3.15 x 2.15 m · Hydraulic tool clamping at ram · Mechanical tool clamping at table · Electrical control: Schuler Multiview HF Note: This machine is an EU re-import! If the machine is to be installed and operated within the EU, it must be retrofitted to comply with the currently valid EU regulations of the country of installation before commissioning. These works are not included in the offer price. As is, ex location, WITHOUT commissioning, disassembled and stored

Stanje: rabljeno, Leto izdelave: 1988, Pressure: 300 t Column clearance: 1800 mm Stroke: 1000 mm Distance table/ram, max. stroke up, adjustment up: 1300 mm Table size: 1600 x 1200 mm Table height above floor: 1080 mm Ram area: 1600 x 1200 mm Weight: 24.0 t Space requirement (W x D x H): 2.8 x 2.1 x 6.0 m Approved for manual loading operations in accordance with German accident prevention regulations (UVV §20) With oil-hydraulic drive, pressure/time and stroke-dependent control, two-hand operation Ijdpfevut Hnsx Af Tsht Can be offered without commissioning, or alternatively with new Siemens S7-1500 F control system Video available from seller prior to dismantling

Stanje: rabljeno, Leto izdelave: 1990, Druck 200 t Ständerweite 1400 mm Hub 300 mm Entfernung Tisch/Stößel, gr. Hub oben, Verst. oben 500 mm Tischfläche 1300 x 1100 mm Ziehkissendruck im Tisch 80 t Ziehkissenhub im Tisch 150 mm Ziehkissenfläche 700 x 700 mm Auswerfer im Stößel 10 t Iodpfx Afevut T Ie Tjht Auswerferhub im Stössel 50 mm Tischhöhe über Flur 930 mm seitlicher Ständerdurchgang 770 mm Stößelfläche 1300 x 1100 mm Geschwindigkeit ab 400 mm/s Geschwindigkeit auf 410 mm/s Arbeitsgeschwindigkeit 20 - 50 mm/s Rückzugskraft 30 t Ölinhalt 1350 l Antriebsleistung 70,0 kW Gewicht 23,0 t Raumbedarf (BxTxH) 4,5 x 3,0 x 3,5 m Für Handeinlegearbeiten zugelassen gemäß den deutschen Unfallverhütungsvorschriften (UVV) mit ölhydraulischem Antrieb, hydraulischem Ziehkissen im Tisch, hydraulischem Auswerfer im Stößel, druck/zeit- und wegabhängig steuerbar, Schnittschlagdämpfung keine Fundamentgrube erforderlich

Stanje: rabljeno, Leto izdelave: 2003, Pressure: 50 t Stroke: 800 mm Distance between uprights: 2250 mm Table/ram distance, ram at top dead center, adjustment at top: 1600 mm Ihjdpfsvuun Hex Af Tot Table surface: 2250 x 1200 mm Ram surface: 2250 x 1200 mm Approach speed: 350 mm/s Return speed: 190 mm/s Working speed: 27.5 mm/s Oil capacity: 800 l Drive power: 24.2 kW Weight: 13.0 t Space requirement: approx. 3.75 x 2.75 x 4.67 m (LxWxH) Approved for manual loading/unloading in accordance with CE standard With oil-hydraulic drive, pressure/time and stroke-dependent controllable, light curtain (Sick) at front and rear, hydraulic ram locking (Sitema), light curtain with active start

Stanje: rabljeno, Leto izdelave: 1991, Pressure: 500 t Column gap: 1910 mm Stroke: 500 mm Distance table/ram, max. stroke up, adjustment up: 700 mm Table area without cutting shock absorber: 1910 x 1360 mm Table area with cutting shock absorber: 1600 x 1360 mm Table height above floor: 800 mm Ram area: 1600 x 1270 mm Lateral frame passage: 600 mm Speed down: 400 mm/s Speed up: 330 mm/s Working speed: 10 - 28 mm/s Oil capacity: 1200 l Drive power: 60.0 kW Weight: 40.0 t Space requirement (WxDxH): 3.6 x 2.5 x 5.0 m Height above floor: 4.5 m Approved for manual loading in accordance with German accident prevention regulations (UVV) Equipped with oil-hydraulic drive, cutting shock absorption, ram locking, and two-hand operation. Table area depending on cutting shock absorber: Ihodpfx Asvuuiqjf Tjt - without: approx. 1910 x 1360 mm - with: approx. 1600 x 1360 mm Can be offered: as-is without commissioning, as-is with commissioning, or alternatively retrofitted with new Siemens S7-1500 F control system.

Stanje: rabljeno, Leto izdelave: 2011, Pressure: 200 t Stroke: 900 mm Upright spacing: 3520 mm Distance table/ram, max. stroke up, adj. up: 1400 mm Table area: 3500 x 1600 mm Ram area: 3500 x 1600 mm Lateral throat clearance: 1150 mm Return speed: from 500 mm/s Advance speed: 550 mm/s Working speed: 38 mm/s Oil capacity: 2000 l Drive power: 90.0 + 21.0 kW Weight: 34.00 t Space required (WxDxH): 4.4 x 3.3 x 5.5 m Approved for manual loading operations according to CE standard With electrohydraulic drive, pressure/time and stroke dependent control, cascading light barrier (Sick) at the front and rear, hydraulic ram locking, operation possible by up to 4 operators Ijdev Svbvspfx Af Tjht

Stanje: rabljeno, Leto izdelave: 1979, Press force: 60 t Column distance: 650 mm Stroke: 220 mm Distance table/ram, max. stroke at top, adjustment at top: 410 mm Table surface: 600 x 525 mm Blankholder force in table: 5 t Blankholder stroke in table: 80 mm Table height above floor: 900 mm Lateral frame opening: 200 mm Ram surface: 560 x 490 mm Ihodovuk Nmepfx Af Tot Required space (WxDxH): 1.9 x 1.3 x 2.7 m Approved for manual loading operations according to German accident prevention regulations (UVV) with oil-hydraulic drive, light curtain (Sick FGS 600), hydraulic blankholder in table, two-hand and foot operation No foundation pit required Can be offered in its current condition, either as-is or ready for operation

Stanje: rabljeno, Leto izdelave: 1997, Pressure 130 t Clearance between uprights 1600 mm Stroke 8 - 140 mm Stroke rate 50 - 200 strokes/min Installation height (stroke + ram adjustment at top position) 520 mm Lateral pass-through between uprights 610 mm Table area 1600 x 880 mm Pass-through opening in table 1000 x 350 mm Table height above floor 950 mm Ram area 1600 x 880 mm Drive power 24.2 kW Machine weight approx. 28.00 t Space requirement approx. 4.3 x 2.2 x 3.8 m Ram adjustment 100 mm Approved for automatic operation according to German accident prevention regulations (UVV) with steplessly adjustable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic ram weight compensation, motorized ram adjustment, automatic stroke adjustment, 8-fold roller guide, electronic roll feeder (Hensel, EVX 500) with hydraulic intermediate ventilation 2025 - in progress: new control and safety electronics - Siemens S7-1500F, Ijdpjvuugcjfx Af Tjht convenient operation via touch panel Video available from seller before dismantling

Stanje: rabljeno, Leto izdelave: 1996, Presskraft 160 t Ständerweite 1380 mm Hub 300 mm Abstand Tisch-Stößel, großer Hub oben, Verstärkung oben 500 mm Tischfläche 1250 x 850 mm Ziehkissendruck im Tisch 80 t Ziehkissenhub im Tisch 150 mm Ziehkissenfläche 450 x 450 mm Tischhöhe über Boden 900 mm Seitlicher Ständerdurchgang 250 x 400 mm Stößelfläche 1350 x 850 mm Abwärtsgeschwindigkeit 400 mm/s Aufwärtsgeschwindigkeit 350 mm/s Arbeitsgeschwindigkeit 50 mm/s Ölvolumen 1850 l Antriebsleistung 58,0 + 11,0 kW Gewicht 24,1 t Platzbedarf (BxTxH) 2,85 x 2,15 x 4,6 m Für Handbeschickung gemäß CE-Norm zugelassen Mit ölhydraulischem Antrieb, druck- und wegabhängig steuerbar, hydraulischem Ziehkissen/Auswerfer im Tisch, Schnittschlagdämpfung, mechanischer Tiefenanschlag (motorisch verstellbar), Stößelverriegelung. Kann sowohl funktionsbereit als auch im bestehenden Zustand angeboten werden. Iedpfx Aovut Ilef Tsht

Stanje: rabljeno, Leto izdelave: 1979, Pressure: 160 t Clearance between uprights: 1,620 mm Stroke: 600 mm Distance table/ram, stroke up: 800 mm Table area: 1,600 x 1,100 mm Table height above floor: 750 mm Iodpfx Ajvut Ryef Tsht Blankholder force in table: 63 t Blankholder stroke in table: 180 mm Blankholder area in table: 1,300 x 750 mm Lateral upright passage: 600 mm Ram area: 1,600 x 1,100 mm Oil capacity: 1,160 l Drive power: 30.0 + 16.0 kW Weight: 23.6 t Space requirements (LxWxH): 2.9 x 2.3 x 4.65 m Height above floor: 4.26 m Approved for manual feeding in accordance with German accident prevention regulations (UVV) With oil-hydraulic drive, hydraulic blankholder in the table No foundation pit required Can be offered 'as-is', in operational condition, or alternatively equipped with a new Siemens S7-1500 F control system Video from seller before dismantling is available

Stanje: rabljeno, Leto izdelave: 1988, Pressing force: 200 t Stroke: 30 - 160 mm Strokes per minute: 40 - 120 /min Upright clearance: 1500 / 1300 mm Shut height (stroke + ram adjustment at top): 860 mm Lateral frame passage: 600 x 530 mm Table surface: 1250 x 1250 mm Pass-through opening in the table: 550 x 300 mm Table height above floor level: 1000 mm Ram surface: 1250 x 1000 mm Ram adjustment: 125 mm Ihjdpovut S Defx Af Tjt Material width: 30 - 500 mm Material thickness: 0.5 - 3.0 mm Feed length: 0 - 999.9 mm Drive power: 50.0 kW Weight: 34.00 t Space requirement approx. 4.0 x 1.7 x 5.2 m (L x W x H) Approved for automatic operation in accordance with German accident prevention regulations (UVV). Equipped with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in the ram, pneumatic ram weight compensation, motor-driven ram adjustment, automatic stroke adjustment.

Stanje: rabljeno, Leto izdelave: 1988, Pressure: 100 t Column gap: 1180 mm Stroke: 3 – 120 mm Strokes per minute: 95 /min Distance table/ram, stroke up: 500 mm Table area: 1100 x 700 mm Through-hole in table: 220 x 100 mm Table height above floor: 800 mm Lateral column passage: 400 mm Ram area: 750 x 350 mm Ram adjustment: 100 mm Oil capacity: 1300 l Drive power: 42.0 kW Weight: 10.0 t Dimensions (W x D x H): 1.8 x 1.8 x 3.55 m Approved for manual loading operations in accordance with German accident prevention regulations (UVV). Equipped with a hydraulically driven toggle system, pressure- and stroke-dependent control, two-hand operation With electrohydraulic roller feed No foundation pit required Ihedpfevut Tzox Af Tjt Optionally available: Fecker decoiler (price on request) Can be offered with or without commissioning – video from the owner before dismantling available

Stanje: rabljeno, Leto izdelave: 1998, Pressure: 160 t Stroke: 30 - 90 mm Stroke rate: 50 - 300 strokes/min Frame gap: 1270 mm Ihsdpfx Afsvut Uxo Tst Installation height (stroke + ram adjustment top): 590 mm Lateral frame passage: 440 mm Table area: 1250 x 900 mm Pass-through opening in table: 950 x 300 mm Ram area: 1250 x 800 mm Ram adjustment: 100 mm Material width: 200 mm Material thickness: up to 6.0 mm Feed length: 0 - 120 mm Drive power: 64.5 kW Weight: 21.00 t Space requirement: approx. 3.0 x 2.2 x 3.9 m (LxWxH) Approved for automatic operation according to CE standard With infinitely variable DC drive, hydraulic clutch/brake combination (Desch brand), automatic stroke adjustment, motorized ram adjustment, fixed table, oil circulation lubrication Mechanical roller feeder Bruderer BBV 205/120 driven by the main shaft/universal shaft of the press Cantilever brackets Guethle CK 01/0800

Stanje: rabljeno, Leto izdelave: 1976, Pressure: 200 t Column gap: 1550 mm Stroke: 30 - 160 mm Strokes per minute: 30 - 90 spm Shut height (stroke + slide adjustment top): 745 mm Side column opening: 800 mm Table area: 1500 x 1150 mm Ihodpfx Asvuubaef Tjt Passage opening in table: 450 mm Table height above floor: 810 mm Slide area: 1500 x 1000 mm Drive power: 38.0 kW Machine weight approx.: 26.5 t Space requirement approx.: 5.1 x 1.6 x 3.7 m Slide adjustment: 110 mm Approved for automatic operation in accordance with German accident prevention regulations (UVV) Equipped with steplessly adjustable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in the slide, pneumatic slide weight compensation, and motorized slide adjustment. Can be offered without commissioning or alternatively with new Siemens S7-1500 F control system.

Stanje: rabljeno, Leto izdelave: 1986, Pressure: 160 t Stroke: 20 - 120 mm Strokes per minute: 20 - 120 Upright clearance: 1300 mm Lateral column passage: 520 mm Installation height: 570 mm Table area: 1250 x 900 mm Pass-through opening in table: 900 x 250 mm Table height above floor: 1000 mm Ram area: 1100 x 700 mm Ram adjustment: 100 mm Iodpfx Afjvut Rts Teht Material width: 20 - 320 mm Material thickness: 0.3 - 4.0 mm Feed length: 1.0 - 9999.99 mm Drive power: 18.5 kW Machine weight: approx. 25.0 t Space requirement: approx. 3.0 x 2.3 x 3.7 m (L x W x H) Approved for automatic operation according to German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination, electro-hydraulic overload protection, automatic stroke adjustment, motorized ram adjustment, pneumatic ram weight compensation, motorized central recirculating lubrication system Electronic roller feeder Kaiser KWV 320 Z, year 2000, with hydraulic intermediate ventilation

Stanje: rabljeno, Leto izdelave: 1991, Pressure: 100 t Frame width: 770 mm Stroke: 200 mm Distance table/ram, stroke at top: 800 mm Table surface: 770 x 900 mm Table height above floor: 850 mm Cushion pressure in table: 40 t Cushion stroke in table: 200 mm Cushion surface in table: 600 x 600 mm Isdovut Ufopfx Af Tjht Lateral frame opening: 600 mm Ram surface: 770 x 900 mm Downward speed: 62 mm/s Upward speed: 350 mm/s Working speed: 17.5 mm/s Oil capacity: 700 l Drive power: 42.0 kW Weight: 9.0 t Space requirements (WxDxH): 2.6 x 2.0 x 3.8 m Approved for manual loading/unloading in accordance with German accident prevention regulations (UVV) Equipment: with oil-hydraulic drive, pressure/time and stroke-dependent control, hydraulic cushion in table, shock absorption during cutting, depth stop, two-hand operation No foundation pit required Can be offered not commissioned, commissioned in current condition, or alternatively with a new Siemens S 7-1500 F control system – video of machine before disassembly available

Stanje: rabljeno, Leto izdelave: 1978, Pressure: 150 t Fixed stroke: 80 mm Stroke rate: 30–150 strokes/min Column width: 930 mm Installation height (stroke + ram adjustment at top): 400 mm Lateral column opening: 650 mm Table area: 880x1300 / 1500x600 mm Through-hole in table: 760x180 mm Table height above floor: 1270 mm Ram area: 920x1000 / 1300x600 mm Weight: 27.5 t Space requirement approx. 3.1 x 1.8 x 4.3 m (LxWxH) Approved for automatic operation in accordance with German accident prevention regulations (UVV) with steplessly adjustable drive, pneumatic clutch/brake combination, fixed stroke, motorized ram adjustment, pneumatic ram weight compensation, central lubrication WITHOUT feed unit Iedpfsvut Urox Af Teht As-is, as currently situated, WITHOUT commissioning Price for commissioning (with new control system) on request