Hidravlična delavniška stiskalnica

MIOTAL® WHP 250

Stanje: novo, Swing over bed: 410 mm Swing over cross slide: 240 mm Turning length: 1,000 mm Swing in the gap: 530 mm Spindle speed: 65 – 1,810 rpm Centre height: 205 mm Spindle bore: 52 mm Tailstock quill taper: MT 4 Total power requirement: 2.2 kW Machine weight approx.: 0.9 t Space required approx.: 1.9 x 0.8 x 1.3 m Leadscrew and feed shaft lathe with: • 3-axis digital readout fully installed Rbedsm Rlb Nepfx Ad Tjt • Electromagnetic main spindle brake • Automatic feed in longitudinal and transverse direction • Safety relay • Micrometer stop • Coolant device • 3-jaw chuck with 1 set each of hard and soft jaws • German operating manual.

Leto izdelave: 2023, Stanje: kot nova (razstavni stroj), Technical data: - Load capacity: 15,000 kg Rbodpfx Aod Iuqaed Tot - Dead weight: 960 kg - Workpiece diameter (insertable): approx. 50 – 3,200 mm - Roller diameter: 250 mm - Roller width: 240 mm - Rotation speed: approx. 100–2,000 mm/min - Two-pedal foot switch - Potentiometer for stepless speed control

Stanje: novo, Leto izdelave: 2025, Centre height: 250 mm Spindle bore: 82 mm Centre distance: 2000 mm Swing over bed: 500 mm Swing in gap: 710 mm Swing over cross slide: 300 mm Spindle speed range: 9 - 1600 rpm (24 steps) Spindle nose: DIN 55029 Camlock D1-8 Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Inch threads: 72 - 1/8 TPI; 49 steps Module threads: 0.5 - 112 mm; 42 steps Diametral threads: 56 - 1/4 DP; 42 steps Rjdpfx Adjd I A Aus Tobt Quill diameter: 75 mm Quill travel: 150 mm Quill taper: Morse Taper 5 Motor power: 7.5 kW Weight: 2,950.00 kg Dimensions: 3132 x 975 x 1270 mm

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Rbjdpfx Aefxyhfod Tot Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Leto izdelave: 2024, Stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply. Rjdehx Elfepfx Ad Tebt

Stanje: novo, Tlak 28,0 t Izvlek 225 mm Hod 150 mm Delovna površina mize 325 x 300 mm Delovna hitrost 2,0 - 9,8 mm/s Povratna hitrost 12,8 mm/s Skupna potrebna moč 4,0 kW Teža stroja pribl. 650 kg Rbsdpfx Adog Igpno Tjt Potrebni prostor pribl. 1800 x 900 x 2000 mm - NC krmiljenje za nastavitev hoda bata - Preklopnik za ročno ali polavtomatsko delovanje - Ventil za uravnavanje pretoka in ventil za uravnavanje tlaka - Vgrajen manometer - Na bat je možno namestiti različna orodja – v notranjosti je 40 mm luknja za pritrditev orodij

Stanje: novo, The KNWP H 100 is a powered workshop press in the workshop press category, distinguished by its precise and robust construction. This hydraulic workshop press features a torsion-resistant, welded frame made of thick-walled profile steel, specifically designed for professional applications. The adjustable, open worktable makes it easy to press bearings in and out, and enables a wide range of assembly and repair tasks. With a pressing force of 100 t and a stroke of 400 mm, axles, beams, and shafts can be straightened effortlessly. In addition, the powered hydraulic unit ensures efficient workflows. High-quality components guarantee reliable operation even under demanding conditions. Whether for technical workshops or maintenance departments, the KNWP H 100 is the ideal tool. Order your powered workshop press now and benefit from its performance. Rsdpfxouyh A Es Ad Tsbt

Leto izdelave: 1967, Stanje: dober (rabljeno), številka stroja/vozila: 7011/C, Table clamping surface: 310 x 1400 mm Table travel (X-axis): approx. 950 mm Table travel (Y-axis): 325/345 mm Table travel (Z-axis): approx. 500 mm Spindle speeds: 20 - 1500 rpm Feeds, longitudinal and cross: 18 - 620 mm/min Feeds, vertical: 18 - 620 mm/min Rsdpfx Asd Rxw Hjd Tsbt Electrical connection: 380 V, kW Required space: 1900 x 1600 x 1750 mm Weight: approx. 1500 kg

Stanje: novo, Leto izdelave: 2025, nosilnost: 20.000 kg, 20-ton container rotator, turning rolls, complete set 380 V, infinitely variable speed adjustable from 200 to 1000 mm/min. Suitable for diameters from 500 mm to 4000 mm Roller diameter: 300 mm x 140 mm Rsdoifgu Uspfx Ad Tsbt Support rollers temperature resistance: 100°C Dual synchronized drive AC motor, 380 V, 750 W With hand and foot remote control, complete set

Stanje: novo, Leto izdelave: 2024, Protec welding turntable, 5000 kg load capacity Continuously variable speed control: 0.05 - 0.5 rpm Hand-held remote control Height: 600 mm Rbjdoid Szcspfx Ad Tet Diameter: 1500 mm Foot pedal remote control available at extra cost