Iztiskalnik z enim vijakom ES 75-28 L/D

Alpahtec A-ES 75.28 V

Leto izdelave: 2004, Stanje: delavnici obnovljeno (rabljeno), No. 2054 1 used, partially overhauled and function-tested Alphatec Extruder, type AE-S 75.28 Screw diameter: 75 mm, 28 L/D Drive: 75 kW AC Screw speed up to 80 rpm, adjustable 1x degassing zone with vacuum pump Installed heating capacity approx. 30 kW 3x temperature control zones for downstream equipment Control cabinet – NEW control system – type Fsdpfx Aoiyx Uzjflsft Inspection possible at our plant in Wuppertal. Further extruders available.

Stanje: pripravljen za uporabo (rabljen), BESCHREIBUNG MERKMALE MATERIAL Kaltband, verzinkt DICKE 0,4–2,5 mm BAND-/COILBREITE 500–1.550 mm MAXIMALES COILGEWICHT FÜR DIE VERARBEITUNG 16 t INNENDURCHMESSER COIL 480–520 mm, 580–620 mm, 740–800 mm AUSSENDURCHMESSER COIL 1.600 mm INNENDURCHMESSER BANDSTREIFEN 508 mm Fodpfx Aovupmdsfleft TOLERANZ BREITE BANDSTREIFEN 0,1 mm MINIMALE STREIFENBREITE 20 mm MAXIMALE STREIFENBREITE 1.520 mm Anzahl der Schnitte / Streifenbreiten: 0,4–1 mm 20 Streifen 1,01–2 mm 10 Streifen 2,01–2,5 mm 8 Streifen MINIMALE BESCHNITTBREITE 8 mm (2×4 mm)

Stanje: rabljeno, številka stroja/vozila: 11481, Rotor diameter: 300 mm Rotor width: 600 mm 3-knife rotor 4 rows of stator knives Feed opening approx. 250 x 600 mm Fsdpfx Asghgmzjflsft Drive motor 37 kW

Stanje: delavnici obnovljeno (rabljeno), Stock no. 2553 Fsdpsiyyndefx Aflsft 1 used, partially overhauled and function-tested extruder, consisting of: Material hopper Single-screw extruder BATTENFELD type UNI-EX 1-75-25 B Screw diameter: 75 mm – 25 L/D, barrel air-cooled Screw speed up to 130 rpm Drive 120 kW – DC (overhauled), drive via belt pulley Heating zone control sections for downstream equipment Control cabinet, melt pressure sensor Inspection / test run possible at short notice by arrangement at our Wuppertal facility. Matching accessories available: > Screen changer > Pelletizing (strand, hot face cut, or water ring) > Miscellaneous Further extruders and complete lines are available for demonstration ex works Wuppertal. We look forward to your enquiry or your visit.

Stanje: zelo dobro (rabljeno), Here we offer you a Zwick / Roell tensile testing machine (table-top testing machine). Zwick / Roell Materials Testing Machine Model: BDO-FB0.5TH - Load testing in tension/compression direction: 500 N Fedpfxod Sr S Ij Afloft - Height: 1565 mm, Width: 292 mm, Depth: 469 mm - Width of test area: unlimited - Test area depth: 100 mm - Max working stroke without accessories: 1266 mm - PC or printer interface: RS 232 - Required PC connection (for PC operation): COM 1 - Power specifications: 115/230 V (PH, N, PE) - Rated power: 0.4 kVA - Mains frequency: 50/60 Hz - Weight: 47 kg - Type: BDO-FB0.5TH - Condition: used - Scope of delivery: (see pictures) (Subject to change and error in technical data and specifications!) If you have any further questions, we are happy to answer them by phone.

Stanje: rabljeno, Leto izdelave: 2008, vpenjalna sila: 160 kN, delovna prostornina: 251 cm³, tlak vbrizgavanja: 2.500 letvica, skupna masa: 8.200 kg, delovne ure: 37.200 h, premer polžastega transporterja: 40 mm, Dobavni pogoji: FCA Pegnitz Ffsdewd Udljpfx Afljt Dobavni rok: po dogovoru Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto

Leto izdelave: 2024, Stanje: novo, Air Separators ZIGZAG Application Description: The ZIGZAG type air separator is a device designed for cleaning materials in the waste recycling process. The separator divides light and heavy fractions using a pneumatic method. It is suitable for a wide range of waste materials with particle sizes from 0 to 150 mm. This type of air separator is used for pre-shredded, torn, or very fine materials. Thanks to our unique design, the separator features multi-point adjustment options that are crucial for the purity of the obtained fractions. ZIGZAG type separators are utilized in many fields: - density classification of metal granules - cleaning shredded scrap from light fractions (films, plastics, paper) Ffedpfeua D Alex Aflet - removal of floating fractions during WEEE recycling - cleaning of plastics, rubber - cleaning of municipal waste and glass - dust removal Construction Description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first section, the ZIGZAG module is installed. The module features an inspection opening and an adjustable material stream gap. In the second section, there is a cyclone for extracting light fractions. Below the cyclone is a rotary valve with variable speed for the discharge of separated materials. At the top of the assembly is a fan with electronic speed control. The design is partially prepared for loading and unloading via belt conveyors. The separator comes with a control cabinet equipped with a safety system.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3.04-00054, Oprema: Na voljo je tipska ploščica, Rabljeni ekstruder Bellaform, tip: BH45-30D, letnik 2013 Ffedpjuxa Abofx Afljt s polžem mere 45 mm - 30 l/d, hitrost vrtenja polža pribl. 160 obr/min z vodno hlajenim servomotorjem 30 kW, z menjalnikom cilinder s 4 ogrevalno/hladilnimi conami in vodno pušo v območju dovoda materialni lijak plus dozirni polž COLORTRONIC za masterbatch en senzor tlaka taline krmilna omara integrirana v ogrodje stroja, s povsem novim PLC in z novim zaslonom na dotik za enostavno in intuitivno upravljanje ta ekstruder je bil funkcionalno preizkušen! Dimenzije: pribl. 195 x 70 x 200 cm (D x Š x V z lijakom)

Leto izdelave: 2024, obratovalne ure: 10 h, Stanje: skoraj kot novo (rabljeno), Extrusion line with stuffing unit – ideal for recycling applications This robust and versatile extrusion line is optimally suited for recycling polyolefins such as LDPE, HDPE, and PP. Thanks to the integrated stuffing unit, materials with low bulk density – such as regrind, EPS, film scraps, or other lightweight plastic waste – can be processed without any issues. The stuffing unit reliably compacts the loose material and feeds it directly to the extruder. This ensures consistent material intake and stable extrusion, even with challenging input materials. Advantages: • Effortlessly processes all types of polyolefins • Ideal for light and voluminous materials such as EPS or film regrind • Efficient material feed thanks to integrated stuffing unit • Compact design, easy to maintain - Feeding extruder / melt extruder - Screw diameter: 145 mm - Drive: 45 kW Ffodpfx Afjtziudsljt - Induction heating - Stuffing unit - Hopper for material feed (Suitable for low bulk density material) - Large filter / screen changer - Strand die adapted

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 6 meseci, Preț disponibil pentru configurația de mai jos: Top Freezer AHT Kinley sau Epta 250, combinat cu vitrină orizontală AHT Miami (ne-recondiționată, dar testată și completă cu grilaj interior – rafturi și separatoare), garniturile capacului de sticlă schimbate. Fun Ice SRL este reprezentant AHT în România de peste 25 de ani Revânzător autorizat de echipamente noi și second-hand AHT Livrare rapidă, la nivel global AHT Kinley 210/250 cm (poate fi folosit ca vitrină frigorifică sau congelator, temperatură medie și joasă) !!! Sistem la cheie, complet testat (bază + 2 rânduri de rafturi) Agent frigorific ECO R290 Pregătit pentru conectare, instalare facilă Iluminare LED internă (canopy LED și iluminare uși cu LED) Unități disponibile aleatoriu pe stoc – Top freezere AHT Kinley / Epta sau Carrier, 210 cm și 250 cm lungime Se pot combina cu vitrine AHT Miami sau Athen XL LED (pe stoc în Oradea, România) Ffodpfx Asrhwuwoflot Toate echipamentele recondiționate din seria AHT EQ beneficiază de garanție 6 (șase) luni pentru piese, cu excepția materialelor consumabile și de uzură (agent frigorific, garnituri, lămpi neon etc.) Accesorii și piese de schimb disponibile pe stoc