Stanje: rabljeno, Leto izdelave: 2020, obratovalne ure: 5.200 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3096,

Stanje: rabljeno, Leto izdelave: 2020, moč: 5 kW (6,80 KM), NAPRODAJ ALI NAJEM PREŠNI KONTEJNER! Dodexuu Rkepfx Aa Hswf Proizvajalec - Ludden & Mennekes Tip - LM20GL Leto izdelave - 2020 Kapaciteta - 20 m³ Moč motorja - 5,5 kW Cena na povpraševanje! ----- Prodajamo prešni kontejner! Proizvajalec - Ludden & Mennekes Tip - LM20GL Leto izdelave - 2003 Kapaciteta - 20 m³ Moč motorja - 5,5 kW Cena na povpraševanje!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Balemaster Djdpfordwlkex Aa Hewf Year: 2006 Type: CMG 268 Waste baler

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Amis ZBP 50 S Duo Sawdust Briquetting Machine Dwjdpfjumwm Sox Aa Hsf Year of manufacture: 2019 Capacity depending on material: up to 140 kg 3,800 operating hours Briquette diameter: 50 mm Hopper capacity: 1.2 m³ Roller with feeder Pre-compacting unit Screw conveyor Hydraulic pump motors, each 7.5 kW Fan cooling Sawdust level sensor in the hopper Hydraulic oil tank: 100 l SIEMENS control system Dimensions (L x W x H): 3000 x 2400 x 1700 mm Weight: 2000 kg Price of new machine: €39,800

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 1.851 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 70 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 500 kg, skupna masa: 17.000 kg, kapaciteta rezervoarja za olje: 70 l, Technical Specifications Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410 BS-22/50 Year of Manufacture: 2023 Pump Operating Hours: 1,851 hours (as of July 2024) Pressing Force: 70 t (equipped with a 70 t hydraulic cylinder, special feature) Specific Press Force: 90.9 N/cm² (equipped with a 70 t hydraulic cylinder, special feature) Feed Hopper Dimensions: 1,400 x 1,000 mm Theoretical Cycle Time: 13 seconds Theoretical Throughput: 266 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Drive Power: 22 kW Total Connected Load: 65 kW Binding: 4-fold vertical, fully automatic Throughput Rates at Bulk Densities of: - 30 kg/m³: approx. 5.5 t/hour - 50 kg/m³: approx. 7.5 t/hour - 100 kg/m³: approx. 9.7 t/hour Bale Weights (at a bale length of approx. 1.2 m): up to 500 kg, depending on material PLC Control: Siemens S7-1500 Operator Panel: Schneider Harmony Press Dimensions, Assembled: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport Weight (Press): 17 t Special Equipment: - Wear-resistant floor made of HARDOX steel - Larger main hydraulic cylinder with 70 t pressing force - Special press ram for compacting loose bulk materials with small particle size - OptiCut XS system for reduced cutting forces and increased throughput - Special press plunger for compacting "challenging" materials Technical Data for Conveyor: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: KGF GB 1500 Year of Manufacture: 2023 Drive Power: 4.0 kW Belt Speed: approx. 0.3 m/second Feed Belt Length: 2,679 mm Inclined Belt Length: 6,866 mm Dwsdpfeu Thbxex Aa Hjf Gooseneck Length: 1,272 mm Incline: 35° Usable Width: 1,400 mm Sidewall Height (Inclined Belt): 800 mm Cleat Height: 50 mm Cleat Spacing: 750 mm Belt Quality: EP 400/3, 3:1 (DIN Quality N) Overall Height: 4,515 mm Transport Dimensions (overall): 11,148 x 2,502 mm (L x W) Technical Data for Contactless Personnel Protection System: Manufacturer: BOREMA Umwelttechnik AG, Switzerland Model: APSS iBOR 22 Year of Manufacture: 2023 Condition of the Baling System: Due to its low operating time of only 1,851 pump hours and the exclusive processing of paper, cardboard, and film, the entire plant is in very good condition. Scope of Delivery: - Avermann baler, type AVOS 1410 BS-22/50, including wire feeding stations and bale chute - Avermann conveyor, type KGF GB 1500 - BOREMA personnel protection system, type APSS iBOR 22 Remarks: Complete documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection by appointment possible. We accept no liability for technical details or possible errors.

Stanje: pripravljen za uporabo (rabljen), HSM V-Press 860 baler, year 2005-2009, price: €5,600 Pressing force: 54 kN Unit pressure: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening (W x H): 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Dwsdsra Rbgopfx Aa Hef Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Binding material: Wire Pressable materials: Foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 plus, year 2013-2015, price: €7,500 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 plus, year 2019, price: €9,000 HSM V-Press 860 ex demo, year 2020, price: €13,000 4-fold wire bale tying Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000 – 1,200 Bale weight (approx.): 500 kg Technical data: Dimensions (L x W x H, mm): 1,213 x 1,824 x 2,987 Feed opening (mm): 1,200 x 565 Cycle time (s): 35 Press force (t): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B, year 2020, price: €14,000 Press force: 594 kN Voltage/Frequency: 400 V / 50 Hz Motor power: 4 kW Feed opening (W x H): 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Loading method: Manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: Wire Pressable material: Film, cardboard Idle cycle time: 25 s

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 004, teža bale: 5 kg, moč: 3 kW (4,08 KM), lastna masa: 130 kg, Gebrauchte THERMOPERS, Modell TO6 – kompakte Ballenpresse für Kunststoffabfälle speziell für weiche Thermoplaste wie Verpackungs- und Schrumpffolien, zur Verdichtung und Verarbeitung zu handlichen Ballen. Seriennummer: 004. Die Thermopers ist die effiziente Lösung zur Handhabung Ihres Kunststoffabfallstroms. Das Material kann direkt in die Maschine eingefüllt werden. Sobald die Thermopers voll ist, wird sie geschlossen und gestartet – der gesamte weitere Prozess erfolgt vollautomatisch und geräuschlos. Das eingefüllte Material wird verdichtet und zu einem ca. 5 kg schweren, kompakten Paket verschweißt. Eigenschaften: - Mit der Thermopers lässt sich das Volumen von Kunststofffolien um 90 % reduzieren. - Durch die kompakte Bauweise und den Anschluss an eine Standard-230-Volt-Steckdose ist das Gerät überall flexibel einsetzbar. - Die Bedienung ist einfach, der Status des Verdichtungsprozesses wird über eine LED-Anzeige klar kommuniziert. - Der Antrieb ist vollständig elektrisch und wartungsarm. - Paketgröße: 60 x 30 x 10 cm, Gewicht ca. 5 kg. Funktionsweise: Das Kunststoffabfallmaterial wird über das Einfüllventil einfach eingefüllt. Nach dem Schließen des Einfüllventils wird der Startvorgang ausgelöst. Das Material wird dann durch eine Kombination aus Druck und Hitze verdichtet, wobei die Außenhaut der Folie das Paket stabil ummantelt. Anschließend wird das Paket abgekühlt und der Pressmechanismus fährt zurück. Nach Abschluss signalisiert die Maschine akustisch, dass das Paket entnommen werden kann. Danach ist die Maschine umgehend wieder betriebsbereit. Dodpfx Aaor Dufbo Hswf Vorteile: • Einfache Bedienung • Vollautomatisch und leise • Kompakte Bauweise • 90 % Volumenreduzierung • Verhindert das Abdriften von Material • Weniger Lagerbedarf • Geringerer Transportaufwand, dadurch CO2-Einsparung • Höhere Erlöse/Weniger Kosten • Geringer Wartungsaufwand • Konform zur Maschinenrichtlinie, CE-gekennzeichnet Technische Daten: Breite: 70 cm Tiefe: 50 cm Höhe: 128 cm (ohne Pressstangen) Höhe: 208 cm (mit Pressstangen) Gewicht: 130 kg Netzspannung: 230 Volt Leistung: 3 kW Energieverbrauch: ca. 1 kWh pro Paket Verkaufspreis: 1.550 Euro zzgl. MwSt., verhandelbar, FCA Oradea, Rumänien Irrtum, Änderungen und Zwischenverkauf vorbehalten. We speak English. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français. / Vorbim romana.

Stanje: rabljeno, Leto izdelave: 2012, moč: 5 kW (6,80 KM), PRESTOVALNIK ZA PRODAJO ALI NAJEM! PRESTOVALNIK LM10ASG LETO IZDELAVE - 2012 MOČ - 5,5 kW KAPACITETA - 10 m2 CENA PO POVPRAŠEVANJU! Dwjdpfx Asxuu Amea Hof

Stanje: novo, For industrial production of rectangular briquettes The ZBP 500 briquettes pressable materials into highly compacted briquettes. The briquettes are easy to store and, thanks to their stackability, easy to transport. In the press chamber of the hydraulic press unit, the briquettes are formed by a pressure cylinder. This allows for the production of up to nine briquettes per minute with a press force of 1 kg/cm². Standard equipment: - Safety limit switch for oil temperature and oil level - Oil cooler - Automatic briquette length monitoring - Automatic hopper level monitoring - Control cabinet with PLC control for fully automatic operation Dedeghgcqopfx Aa Hswf Options: - Customizable hopper extension available according to customer requirements - Press ram with lettering/logo

Stanje: dober (rabljeno), Leto izdelave: 2019, obratovalne ure: 673 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 720 mm, višina bale: 1.100 mm, skupna masa: 12.500 kg, kapaciteta rezervoarja za olje: 800 l, moč: 37 kW (50,31 KM), Technical Data – Baler: Manufacturer: Riko Ekos d.o.o Model: S-60K (5) Year of manufacture: 2019 Operating hours: 673 hours (as of August 24) Number of bales pressed: 1,127 bales (as of August 24) Dodpfx Aasu Thicj Hewf Main press force: 60 t Feed hopper dimensions: 1,100 x 1,400 mm Filling volume per press cycle: 2.1 m³ Bale dimensions: 720 x 1,100 mm (W x H), length variable Drive power: 37 kW Total connected load: 47 kW Tying: 4-fold horizontal, fully automatic Throughput rates at bulk density: – 30 kg/m³: approx. 5–6 t/h – 50 kg/m³: approx. 9–11 t/h – 100 kg/m³: approx. 15–19 t/h Hydraulic oil tank capacity: 800 L PLC control: Siemens SIMATIC S7-1200 Operator panel: Siemens SIMATIC HMI Overall machine dimensions (installed, without feed hopper and chute): 12,220 x 3,654 x 2,685 mm (L x W x H) Effective transport dimensions (press only, strapping system removed): 7,230 x 1,750 x 2,685 mm (L x W x H) Transport weight (press): 12.5 t Condition of the Baler: The machine is part of a sorting facility and was only used occasionally for compacting specific material streams. It is no longer required and is therefore being sold. The baler is still operated once a week for two to three bales to keep it functional. Due to the very low operating hours, the baler is in good condition and ready for immediate use. Scope of supply: 1 baler, without conveyor belt, hopper, and drop chute 8 wire tying stations, without wire 1 bale slide 1 set of machine documentation Remarks: The documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete. Inspection by appointment is possible. We assume no liability for the technical specifications or possible errors.

Stanje: zelo dobro (rabljeno), Model: Stiskalnica za baliranje HSM V-press 1160 plus Dwsdpfx Aev Al Tioa Hof Tlačna sila (kN): 532 Zmogljivost (bale/uro): 1-2 Največja velikost bale (mm): 1200x1100x1000-1200 Dimenzije d x š x v (mm): 1780x1150x2985 Moč (kW): 4 kW Teža (kg): 2300 Leto izdelave: 2017-2021 Letnik 2018, cena: 8.500 EUR

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, številka stroja/vozila: 161.40.492, Strautmann használt bálaprés, típus: BalePress 3, sorozatszám: 161.40.492, gyártási év: 2020, szalagkihúzó kampóval Tápellátás: 230 V 50 Hz Elektromos teljesítmény: 0,75 kW Védettségi osztály: IP54 Préselési erő: 27 kN Préselési út: 580 mm Gép súlya: 275 kg Dwodpfx Aaovvk T Is Hof Szállítási méretek (h x sz x m): 1070 x 754 x 2110 mm (raklap nélkül) 1070 x 754 x 1945 mm Töltőnyílás (sz x m): kb. 700 x 450 mm Ciklusidő: 27 mp Bála súlya: 30 kg Bála mérete a kamrában (h x sz x m)*: 500 x 700 x 500 mm Bála kötözés: két zsineggel, PP pánttal ELŐNYÖK Egyszerű telepítés és szállítás Könnyen kezelhető bálák Gyakorlatias bálaürítés Fólia/karton üzemmód váltókapcsoló Egyszerű és biztonságos kezelhetőség Stabil ajtózáró rendszer Stabil préspad vezetés „D” szintű biztonsági rendszer Kis helyigény BP3: nyitott ajtóval történő bála kötözés; BP3CD: zárt ajtóval kötözött bálák Masszív kivitel Görgős ajtózár Ideális kisboltok számára. A Strautmann BalePress 3/3CD egy kompakt, egykamrás bálaprés, amely tökéletesen alkalmas papír, fólia, PET-palack és műanyag hulladék bálázására. Kompakt kialakítása miatt nagyon kis helyen is elfér, így kiváló választás partnereink számára, akiknél kisebb a hulladékmennyiség és a hely is szűkös. Az akár 3 tonnás préselési erővel akár 90%-os térfogatcsökkenés is elérhető az anyagtól függően. A gép maximum 35 kg-os, könnyen kezelhető bálákat állít elő. Használatával jelentős tárolási és szállítási költségek takaríthatók meg, a bálák egyszerűbben szállíthatók és értékesíthetők, mint a kezeletlen hulladék. Kis mérete miatt korlátozott helyű partnereink számára is ideális választás. Ár: 3.490 EUR + ÁFA, alku lehetséges, FCA: Nagyvárad/Románia Az elírás, változtatás és közbenső értékesítés jogát fenntartjuk. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français. /Vorbim romana.

Stanje: rabljeno, Leto izdelave: 2016, Na prodajo/za najem: stiskalna postaja STV1000 z 1 kosom 30 m3 kontejnerja! Tehnične specifikacije stiskalne postaje: Stiskalna postaja STV1000 Letnik izdelave: 2016 Dsdexurycopfx Aa Hewf Dimenzije (dolžina x višina x širina): 3360 x 1165 x 1561 mm Tlačna sila: 300 kN Polnilna odprtina: 1180 x 1405 mm Moč: 7,5 kW KONTEJNER: Kapaciteta/volumen – 30 m3 Letnik izdelave: 2016 CENA NA POVPRAŠEVANJE!

Stanje: novo, številka stroja/vozila: AMIS Brikettierpressen Typ ZBP 50, 60 und 70, AT A GLANCE: Variable container sizes (customizable on request) Left- or right-hand configuration Hydraulics with separate oil tank All series also available as "DUO" variants Wood chips, sawdust, shavings, etc. are generated in all craft and industrial woodworking operations. This results in significant daily storage and transport costs. Briquetting presses offer an ideal solution, as briquettes are easy and space-saving to store and transport. Additionally, the risk of self-ignition is significantly reduced. The briquetting presses require little space, are robustly constructed, and equipped with low-maintenance technology. Whether it’s wood, paper, biomass, foam, or polystyrene – the ZBP briquettes every suitable material. With a throughput capacity of up to 35–130 kg/h, they are particularly suitable for small and medium-sized businesses. Flexible installation options thanks to availability in both left- and right-hand models. Start briquetting now! Dsdpoghgciofx Aa Hswf

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 170 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 1.800 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, skupna masa: 40.000 kg, kapaciteta rezervoarja za olje: 3.000 l, leto zadnje generalne obnove: 2024, For sale is a used baling press system consisting of a chain belt conveyor for under-floor operation, complete with a feed hopper, a hydraulic pre-compactor with agitator, a MACPRESSE 111A baling press, two complete wire tying racks each with 5 wire spool holders (wire not included). Technical data - Press: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 111A Year of manufacture: 1996, overhauled in 10/2024 Main press force: 170 t Specific press force: 14 kg/cm² Feed chute dimensions: 1,800 x 1,020 mm Filling volume: 2.5 m³ Theoretical throughput: 750 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 55 kW Tying: 5-fold horizontal, fully automatic Throughput rates: approx. 30 to 35 t/hour, depending on material Hydraulic tank volume: 3,000 l Transport dimensions (press with new machine feet): 11,700 x 2,300 x 2,900 mm (L x W x H) Machine weight (press): approx. 40 t Remarks: The baling press was partially overhauled in our workshop and fully tested after completion—see our function video for reference. Previously, paper and cardboard from municipal collection were pressed with the system. The operation was reassigned after the contract period ended, so the entire plant is for sale. Details of the overhaul and replaced spare parts can be found in the detailed photo documentation and our offer. The full documentation (manual, CE declaration, electrical/hydraulic diagrams) is available. Inspection by appointment. No liability assumed for technical data or possible errors. Technical data - Conveyor belt: Manufacturer: Wagensfeld B.V. Model: Chain belt conveyor 1700 mm Year of manufacture: 2017 Drive power: 7.5 kW Belt speed: 14 m/minute Feed belt length: 6,900 mm Dwsdpfx Aasu Th D Rj Hjf Inclined belt length: 12,885 mm Gooseneck length: 1,747 mm Total length: 21,271 mm Incline: 32° Usable width: 1,644 mm Drive axle height above ground: 5,777 mm Feed belt wall height: 500 mm Inclined belt wall height: 880 mm Steel cleat height: 40 mm Cleat spacing: 1,200 mm Transport dimensions (disassembled): 15,005 x 2,503 x 2,435 mm (L x W x H) Pit dimensions: 11,500 x 2,700 x 1,015 mm (L x W x D) Remarks: The chain belt conveyor, built in 2017, was custom-built and installed to fit the press at its last installation in the Netherlands. The conveyor is in good, ready-to-use condition and has therefore not been overhauled. A layout drawing with pit dimensions is available. Scope of delivery: 1 x Chain belt conveyor, Wagensveld B.V. 1 x Feed hopper with pre-compactor flaps 1 x Agitator 1 x MACPRESSE baling press, type 111A 2 x Wire tying racks with wire spool holders, without wire 1 x Operating manual with CE declaration, electrical and hydraulic wiring diagrams

Stanje: rabljeno, Leto izdelave: 2009, moč: 11 kW (14,96 KM), For sale or rent: PRESS STATION WITH 2 CONTAINERS, each 30 m³ capacity: Technical Specifications: Dwedoxuqlqspfx Aa Hsf - Model: STV 1200 Press Station - Year of manufacture: 2009 - Dimensions (L x H x W): 3,660 x 1,165 x 1,561 mm - Pressing force: 320 kN - Filling opening: 1,180 x 1,405 mm - Ram height: 600 mm - Extension ram width: 1,405 mm - Pressing/chamber depth: 600 mm - Power: 11 kW - Equipped with Schott Systema+ hydraulic hook-lift tank system - Newly painted Containers (2 units): - Capacity: 30 m³ each - Year of manufacture: 2009 - Newly painted The press station is in good condition! 1. Ram, newly primed/painted 2. Hydraulic cylinders, all reassembled/restored 3. New hydraulic components and hoses 4. The automatic locking system has been renewed PRICE ON REQUEST!

Stanje: novo, The briquette press is designed for compressing all types of sawdust and wood shavings into briquettes. Its construction is compact, user-friendly, and it is manufactured in Germany. The large oil tank ensures continuous operation. The briquetting press is immediately ready for use – simply plug it in and start working. Dwedpfx Aaskyza Ds Hsf

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 3.641 h, Funkcionalnost: omejena funkcionalnost, stiskalna sila: 36 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.080 mm, širina bale: 1.100 mm, višina bale: 750 mm, moč: 15 kW (20,39 KM), lastna masa: 4.000 kg, volumenski pretok: 90 m³/h, Technical Data – Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of Manufacture: 2010 Dwedpfsu Thh Ejx Aa Hjf Operating Hours: 3,641 h Main Press Force: 36 t Specific Pressing Force: 467 N/cm² Feed Hopper Dimensions: 1,080 x 1,100 mm (L x W) Cycle Time: 34 seconds Filling Volume per Press Cycle: 0.85 m³ Theoretical Throughput: 90 m³/hour Throughput under Operating Conditions (at material bulk density of 35 kg/m³): approx. 51 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Drive Power: 15 kW Binding: 4-fold vertical, semi-automatic, with polyester twine Throughput at Bulk Density of: - 35 kg/m³: 1.8 t/hour - 60 kg/m³: 2.5 t/hour - 100 kg/m³: 3.1 t/hour Transport Dimensions (Baler only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine Weight (Baler): approx. 4 t Remarks: The baler has been function-tested in our workshop, subsequently stored, and is thus available at short notice. Complete machine documentation (operating manual, CE certificate, electrical and hydraulic schematics) is available. Viewing by appointment is possible. We assume no liability for the technical specifications or possible errors.

Stanje: rabljeno, Leto izdelave: 2007, moč: 7 kW (9,52 KM), NA PRODAJO / ZA NAJEM: VERTIKALNA BALIRKA! (Najem na voljo v Litvi, Latviji, Estoniji in na Poljskem) Tehnične informacije: Proizvajalec: HSM Model: HSM 500 VL Pritisk: 54–540 kN Velikost bale: 1200 x 800 x 1200 mm Teža bale: cca 500 kg Maks. velikost bale: cca 1200 x 800 x 1200 mm (Š x G x V) Dimenzije preše: 1200 x 800 x 1520 mm (Š x G x V) Motor: 7,5 kW Leto izdelave: 2005 Dwedpfxexuqkms Aa Hef CENA PO POVPRAŠEVANJU!

Stanje: novo, številka stroja/vozila: ZBP 30, The AMIS briquetting press type ZBP 30 produces 30 mm briquettes. These briquettes are ideally suited for combustion in wood gasifiers as well as in smaller wood chip boilers and heating systems. Any material generated in a woodworking operation (shavings, dust, etc.) can be briquetted. Wood chips, sawdust, wood shavings, and more are by-products found in all craft and industrial enterprises within the woodworking sector. Enormous storage and transport costs are incurred daily for these materials. Briquetting presses offer an ideal solution, as briquettes are simple and space-saving to store and transport. Additionally, the risk of self-ignition is significantly reduced. Dedpfxsghgcbj Aa Howf The briquetting presses require little space, are robustly built, and feature low-maintenance technology. Whether wood, paper, biomass, foam, or Styrofoam – the ZBP can briquette any suitable material. With a throughput of up to 35 – 130 kg/h, they are especially suitable for small and medium-sized businesses.

Stanje: dober (rabljeno), Leto izdelave: 2019, obratovalne ure: 2.320 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 720 mm, višina bale: 1.100 mm, skupna masa: 12.500 kg, kapaciteta rezervoarja za olje: 800 l, moč: 37 kW (50,31 KM), Technical Data – Baler: Manufacturer: Riko Ekos d.o.o Model: S-60K (6) Year of Manufacture: 2019 Operating Hours: 2,320 hours (as of Aug 2024) Number of Bales Produced: 4,359 bales (as of Aug 2024) Main Pressing Force: 60 t Feed Hopper Dimensions: 1,100 x 1,400 mm Filling Volume per Press Cycle: 2.1 m³ Bale Dimensions: 720 x 1,100 mm (W x H), variable length Drive Power: 37 kW Total Connected Load: 47 kW Tying: 4-fold horizontal, fully automatic Throughput Rates at a Dwedpfx Aou Thipea Hef Bulk Density of 30 kg/m³: approx. 5 – 6 t/h Bulk Density of 50 kg/m³: approx. 9 – 11 t/h Bulk Density of 100 kg/m³: approx. 15 – 19 t/h Hydraulic Oil Tank Capacity: 800 L PLC Control: Siemens SIMATIC S7-1200 Operating Panel: Siemens SIMATIC HMI Overall Press Dimensions (assembled, without hopper and drop shaft): 12,220 x 3,654 x 2,685 mm (L x W x H) Effective Transport Dimensions (press only, with tying system removed): 7,230 x 1,750 x 2,685 mm (L x W x H) Transport Weight (press): 12.5 t Condition of the Baler: The machine is part of a sorting plant and was only partially used for compacting individual material streams. It is no longer required and is therefore being sold. The press is, however, started once a week to produce two or three bales in order to keep it operational. Due to the very low operating hours, the press is in good, ready-to-use condition. Scope of Delivery for the Baler: 1 piece baler without conveyor belt, hopper, or drop shaft 8 pieces wire threading stations, without wire 1 piece bale chute 1 set of machine documentation Notes: The documentation (operating manual, CE declaration, electrical/hydraulic diagrams) is complete. Inspection by appointment. We do not assume liability for technical details or any errors.

Stanje: zelo dobro (rabljeno), obratovalne ure: 2.658 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 71 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.620 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 600 kg, vhodni tok: 200 A, kapaciteta rezervoarja za olje: 1.250 l, lastna masa: 29.000 kg, Technical Data - Baler: Dwsdpfx Aju Thcvsa Hef Manufacturer: BOA Recycling Systems B.V. Model: Impress M75-45-A-5-1.6 Ecoline Year of Manufacture: 2021 Operating Hours: 2,658 hours (as of May 2024) Number of Bales Produced: 42,212 (as of May 2024) Main Pressing Force: 71.2 kN (71 t) Specific Pressing Force: 9 kg/cm² Operating Pressure: 280 bar Cylinder Stroke: 2,200 mm Feed Hopper Dimensions: 1,620 x 1,000 mm Filling Volume per Pressing Cycle: 2.4 m³ Theoretical Cycle Time: 21 seconds Theoretical Throughput Capacity: 450 m³/hour Bale Dimensions: 1,100 x 720 mm, length adjustable up to 1,400 mm Drive Power: 45 kW Total Connected Load: 100 kW Power Consumption: 200 A Tying: 5-fold vertical, fully automatic; press ram is prepared for additional 3-fold horizontal tying Throughput Rates at Bulk Densities of: - 30 kg/m³: approx. 13.6 t/hour - 60 kg/m³: approx. 24.2 t/hour - 100 kg/m³: approx. 36.4 t/hour - 150 kg/m³: approx. 54.7 t/hour Bale Weights: up to 600 kg (material-dependent) Hydraulic Tank Volume: 1,250 L PLC: Siemens S7 1500 Control Panel: Siemens SIMATIC HMI TOUCH Transport Dimensions of Baler: 10,000 x 2,800 x 3,385 mm (L x W x H) Height Assembled with Feed Hopper: 4,743 mm Height Assembled with Conveyor Belt: 7,123 mm Machine Weight (Baler): 29 t Noise Level:

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, vhodni tok: 238 A, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Dodpfjvf E Avjx Aa Hjwf Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, obratovalne ure: 3.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 70 t, skupna masa: 9.500 kg, širina odprtine za polnjenje: 420 mm, dolžina polnilne odprtine: 1.250 mm, Technical Data for Baling Press / Can Press / Sheet Metal Press: Manufacturer: unoTech GmbH Dwodpfx Aaou Th S Sj Hef Model: UPAXX 70 Year of manufacture: 2019 Operating hours: approx. 3,000 hours Pressing force: 700 kN at 315 bar Filling opening (feed chute): 420 x 1,250 mm (D x W) Channel cross-section (bale size): 350 x 500 mm (H x W), length depends on material Drive power: 30 kW Total connected load: 40 kW Total current consumption: 70 A Throughput for empty beverage cans: - with one compaction cycle: approx. 1.7 t/hour - with two compaction cycles: approx. 2.5 t/hour Achieved compaction: approx. 1,200 kg/m³ Hydraulic oil tank volume: 850 L Press dimensions (assembled): 8,000 x 1,600 x 2,500 mm (L x W x H) Transport weight (press): approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material suitability: According to the manufacturer, this machine is suitable for pressing tin cans, sheet metal trimmings, steel sheet, as well as aluminum, brass, and copper scrap. Condition of the baling press: The baling press has been completely overhauled in our workshop. The press is in very good condition and is sold with a 12-month OBM spare parts warranty. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagrams). Inspection is possible by appointment. We do not assume liability for the technical specifications or possible errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Technical specifications of the EPS (Styrofoam) compactor: Manufacturer: FZ-Recycling GmbH & Co. KG, Germany Model: FZR 320 Year of manufacture: 12/2022 Shredder drive power: 4 kW Compactor screw drive power: 7.5 kW Hydraulic unit drive power for retaining clamp in press channel: 1.1 kW Total connected load: 12.6 kW Rated current: 32 A Compaction ratio of pressed blocks to original material: approx. 50:1 (material dependent) Block weight after compaction: approx. 300 kg/m³ (material dependent) Block dimensions: 320 x 320 mm, length variable Throughput: approx. 100 kg/hour, depending on material Achievable density: approx. 250–300 kg/m³ The pressed blocks are stacked to about 1400 mm high on a pallet and wrapped with stretch film. Machine dimensions: approx. 4,600 x 1,400 x 1,980 mm (L x W x H) Djdou Thkaopfx Aa Howf Transport weight of compactor: 1,325 kg Condition of the compactor: The machine has only been used occasionally, is in very good condition, and is available at short notice. Due to the low weight of the compactor and the forklift shoes in the transport frame, the machine is mobile and can be used directly at the material generation point, such as on construction sites. Electrical connection is provided via a CEE 32 A plug. Scope of delivery: 1 unit EPS compactor, ready to connect and operate Remarks: The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. An inspection is possible by appointment. We assume no liability for technical data or possible errors.