Stiskalnica za bale

HSM 4809

Stanje: pripravljen za uporabo (rabljen), Balirni stroj Hsm HL 4809 LI Blsdpfx Afora Dddensd - Velika odprtina za polnjenje, idealna za velike škatle - Posoda s prekucnikom za enostavno polnjenje Pritisna sila v kN: 480 - Napetost/frekvenca: 3 x 400 V / 50 Hz - Teža bale v kg (odvisno od materiala): do 400 kg - Dimenzije bale dolžina x širina x višina v mm: 1200 x 1100 x 750 - Dimenzije stroja dolžina x širina x višina v mm: 5648 x 1849 x 2515 Trajanje praznega cikla v sekundah: 53 - Ročno vezanje: 4-krat z žico

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Teža: 4950 kg, skupna masa: 12 000 kg Bljdpfewpmckjx Afnod 5,5 kW

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, dolžina bale: 1.000 mm, širina bale: 750 mm, višina bale: 750.750.750 mm, teža bale: 500 kg, vhodna napetost: 400 V, skupna masa: 7.500 kg, kapaciteta rezervoarja za olje: 500 l, moč: 30 kW (40,79 KM), lastna masa: 7.500 kg, vhodna frekvenca: 50 Hz, Manufacturer: Pal Pacomat V Year of manufacture: 1985 Main press force: 50 t Bljdpfx Aoic Rl Djfnod Specific press force: 5 kg/cm² Feed channel: 1,000 x 720 mm (L x W) Theoretical throughput: 200 m³/h Bale size: 700 x 1,000 mm (W x H), length adjustable Drive motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8 t The hydraulic unit is functional, the drive motor is removed.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, obratovalne ure: 2.632 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 29.381, stiskalna sila: 35 t, širina odprtine za polnjenje: 620 mm, dolžina polnilne odprtine: 1.000 mm, skupna širina: 2.380 mm, skupna višina: 2.500 mm, skupna dolžina: 6.625 mm, Vključno z dovodnim trakom. Stroj je takoj pripravljen za uporabo. Bledpfsvaw T Aex Afnsd

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 38 t, moč: 5,5 kW (7,48 KM), Neu auf Lager Bledowhfu Aopfx Afnsd Avermann MPC 20 PEL Optional mit Behälterlift

Stanje: dober (rabljeno), Leto izdelave: 1973, Waste compactor container, waste compactor, compactor container, waste container, self-compacting container, mobile waste compactor, paper compactor container, paper container Bedpjb A Ii Sjfx Afneld - Stationary compactor for: roll-off containers - Feed chute: covered - Compaction process: hydraulic - Compaction process: automatic - Emergency stop switch: at the feed chute - Ram dimensions: 1450 x 650 mm - Ram stroke: 1100 mm - Transport dimensions: 2100 x 4500 mm - Side screw ratchets for roll-off containers - Function tested

Stanje: pripravljen za uporabo (rabljen), Baler HSM VK 42/1200 fully automatic Pressing force: 42 tons Bale dimensions: 700 x 800 x 600 – 1200 mm Blsdpfx Afsra Nrxenod Bale weight: approx. 450 kg Press length: approx. 7 meters Press weight: approx. 6,000 kg Tying: 4x automatic wire tying

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Balemaster Year: 2006 Type: CMG 268 Waste baler Bedpfx Aordwlksfnjld

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, vhodni tok: 238 A, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded Bjdpfx Asvf E Avefnsld - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: W230-028, stiskalna sila: 80 t, trajanje garancije: 24 meseci, pritisk: 250 letvica, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2024, Oprema: dokumentacija / priročnik, This fully refurbished baler is being sold by Bollegraaf Recycling Solutions. It concerns a HBC80 baler (45kW) equipped with vertical tying. This baler has already been completely refurbished in our overhaul workshop. The refurbishment was carried out in accordance with the strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold including a 2-year warranty. The press is supplied with the following options: * support stands, * intermediate hopper, * bale exit chute, Bljdpjtvat Tofx Afnod * wire spool platforms