Stiskalnica za bale

HSM V press 1160 plus , v press 1160 max

Stanje: rabljeno, prevoženi kilometri: 306.127 km, prva registracija: 10/2013, skupna dolžina: 10.600 mm, skupna širina: 2.520 mm, skupna višina: 300 mm, Leto izdelave: 2013, Oprema: ABS, EBS (Elektronski zavorni sistem), elektronski program stabilnosti (ESP), klimatska naprava, nadzor oprijema, servovolan, tempomat, žerjav, - Stability control = Additional options and accessories = - Differential lock = Notes = MB Actros 4146 AK MP3 8x8 crane truck with Fassi 660 loading crane / winch and slewing drive !! SINGLE TIRES !! • All-wheel drive • Fully leaf-sprung • EURO 5 • Telligent 16-speed transmission with clutch pedal • Air conditioning • Reinforced engine brake • Cruise control • Auxiliary heater • Hill start assist • 2 x differential lock • ABS deactivatable • Signal horn • Lamp bar with LED work lights • Rotating beacons • Multifunction steering wheel • Radio CD player • Telephone • Tires: 395/85 R20 Gbodpfx Afjwmn Tlsqsg • Good tire tread! • Unladen weight: 22,544 kg • Gross weight: 32,000 kg (36,000 kg technically possible!) • Trailer coupling – towing eye • Permissible towing capacity: 12,500 kg • 2-line trailer brake system • Overall vehicle length: 10,600 mm Body: FASSI 660 XD Type F600A / 660 AXP 24 • Remote control • 4 hydraulic extensions • Hydraulic slewing head • Hydraulic winch • 4-point stabilizer supports • 10-ton spreader beam • Flatbed body by MÜLLER with drop sides Special equipment: 2-line trailer brake, trailer coupling G 150, trailer socket 24V / 15-pin, brushed steel dashboard, audio system: CD radio (Bluetooth incl. fixed installation for telephone), 220 Ah battery, compressed air horn(s) on cab roof, cab: reinforced shock absorber, cab: moveable entry, cab: comfort suspension (1.8 Hz), construction site vehicle filter, 100 A alternator, fuel tank 400 liters, reinforced clutch, reinforced cooling, PTO MB 10C, programmable special module, rotating beacon left/right, side windows with heat-insulating glass, circuit breaker, seats in cab: comfort driver's seat with air suspension and horizontal suspension, sun visor, roller sunblind for side windows, driver’s and passenger doors, inverter 24V/12V 15A, reinforced stabilizer rear axle, 12 volt socket, front bumper in steel, cross member for trailer coupling, additional heat insulation, auxiliary water heater, gearbox oil cooler Additional features: 2nd steerable front axle, EURO 5 emission standard, axle configuration: 8x8/4, front axle load 9.0 t, trailer coupling: towing coupling, upright exhaust silencer behind cab, mirrors electrically adjustable and heated, steel roof hatch, rear axle differential lock, front axle differential lock, cab version: S (short), suspension leaf/leaf, electric window lifters, 16-speed gearbox, rear axle H 7, 13 t, crown wheel 300, hydraulic pump (Meiller – 6-piston pump), body/chassis for tipper (additional AV), body/chassis: tipper, model update from 06/2008, engine 12.0 ltr – 335 kW V6 diesel (OM 501 LA), engine brake with constant throttle, wheelbase 4800 mm, rear window, Telligent shift system, Telligent braking system with ABS, drum brake front and rear axle, transfer case with differential lock, CB radio preparation, telephone/fax preparation, immobiliser, heat-insulating glass, central locking Cab: single

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Mobile Shredding Machine - Used & Fully Refurbished - Arjes 760 D with Magnet - On Wheel Axle - Complete Conversion to Hydraulic Drive -- High Performance Shredder -- Gjdpfxsv Dtfve Afqobg - The Most Powerful Shredder in its Size Class - For Heavy-Duty Applications REBUILD The machine was completely disassembled and rebuilt starting from the steel construction. Conversion to a hydraulic drive system Engine: Mercedes Benz OM 471 Stage 3 350 kW / 477 HP!!! (No AdBlue Required) - Transmission: SYNCHRON: 2x125,000 Nm - Hydraulics: Bosch Rexroth -- 285 cc pump + 2x 215 cc hydraulic motors - Control System: NEW - Hydraulic Lines: NEW - Radio Remote Control: NEW - Shafts / Tools: NEW (Combination tool for wood, waste, light scrap) The machine is equipped with a post-crushing beam. WERT GmbH is a metalworking company specialized in the development and production of twin-shaft shredding tools as well as machinery refurbishment for renowned brands such as Hammel, Arjes, Linder, Eggersmann, Terex, and Keestrack. With an in-house design department and a highly qualified team, we offer customized, innovative solutions that meet the highest quality standards. Our goal is to continuously meet the individual requirements of our customers through technological excellence and continuous improvement. We serve companies from various sectors including waste management, recycling, and mechanical engineering, and place great value on long-term partnerships. With our reliable and high-performance shredding solutions, we support our customers in increasing their efficiency and competitiveness.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 22 kW (29,91 KM), skupna masa: 2.600 kg, Leto izdelave: 2006, Cutting width: 600 mm Gbedotzbvyjpfx Afqjg Cutting length: 1200 mm Center distance between knife shafts: 250 mm Knife shaft speed: approx. 16 rpm Knife shaft torque: approx. 17,000 Nm Feed hopper: 1,200 mm x 2,400 mm Drive power: 2 x 11 kW Total drive power: 22 kW Weight: 2,600 kg

Stanje: pripravljen za uporabo (rabljen), Stožčasti drobilnik Svedala Znamka: Svedala Godpfxepn I H Tj Afqjbg Tip: 36/H/MC Vključuje: osnovno šasijo in oljno enoto

Leto izdelave: 1982, Stanje: dober (rabljeno), številka stroja/vozila: 14320, baling press / paper baler Gsdsiuky Iepfx Afqobg

Leto izdelave: 2021, Stanje: kot nova (razstavni stroj), Overband plate magnet Godped Evl Djfx Afqjbg Construction in stainless steel 1.4301, fully welded and sealed including drawer for cleaning 800 x 500 x 180 mm completely welded housing lifting eyes for suspension

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Gsdpfovwlqqjx Afqobg Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Leto izdelave: 2006, obratovalne ure: 15.000 h, Stanje: dober (rabljeno), For sale is an Erema 1007T Year of manufacture: 2006 Operating hours: 15,420 Throughput: 250–350 kg/h The plant is currently processing HDPE, but it is also suitable for other plastics such as LDPE... Gbsdpfxsumubye Afqjg The machine can be inspected during operation. A new extruder screw was installed in February.

Stanje: nepreverjeno (rabljeno), Hydraulic press for compacting paper and similar materials. The machine was in working condition prior to disassembly. Press dimensions: Length: 4,850 mm, width: 1,370 mm, height: 3,000 mm (can be reduced to 2,300 mm). Weight approx. 3,500 - 4,000 kg. For further information, please contact: +48 539 660 495. Gbsdpoh Nyfyefx Afqsg

Stanje: novo, Leto izdelave: 2024, Hacker knives 40 x 40 concave Blades for Weima, Gross, etc. Gbedpfjbxu Dhjx Afqsg For almost all common chippers/shredders Available from stock in Bitburg Subject to prior sale