Stacionarna stiskalnica za smeti št. 05

Avermann AVOS SP-16

Stanje: dober (rabljeno), Press: Year of manufacture: 2000 Ijdpfx Agjv D A Itspja 380 V, 32 A 3,300 x 2,100 x 2,200 mm (LxWxH) Buffer tank: Year of manufacture: 2016 25 m³ 6,000 x 2,500 x 2,600 mm (LxWxH)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 1.851 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 70 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 500 kg, skupna masa: 17.000 kg, kapaciteta rezervoarja za olje: 70 l, Technical Specifications Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410 BS-22/50 Year of Manufacture: 2023 Pump Operating Hours: 1,851 hours (as of July 2024) Pressing Force: 70 t (equipped with a 70 t hydraulic cylinder, special feature) Specific Press Force: 90.9 N/cm² (equipped with a 70 t hydraulic cylinder, special feature) Feed Hopper Dimensions: 1,400 x 1,000 mm Theoretical Cycle Time: 13 seconds Theoretical Throughput: 266 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Drive Power: 22 kW Total Connected Load: 65 kW Binding: 4-fold vertical, fully automatic Throughput Rates at Bulk Densities of: - 30 kg/m³: approx. 5.5 t/hour - 50 kg/m³: approx. 7.5 t/hour - 100 kg/m³: approx. 9.7 t/hour Bale Weights (at a bale length of approx. 1.2 m): up to 500 kg, depending on material PLC Control: Siemens S7-1500 Operator Panel: Schneider Harmony Press Dimensions, Assembled: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport Weight (Press): 17 t Special Equipment: - Wear-resistant floor made of HARDOX steel - Larger main hydraulic cylinder with 70 t pressing force - Special press ram for compacting loose bulk materials with small particle size - OptiCut XS system for reduced cutting forces and increased throughput - Special press plunger for compacting "challenging" materials Technical Data for Conveyor: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: KGF GB 1500 Year of Manufacture: 2023 Drive Power: 4.0 kW Belt Speed: approx. 0.3 m/second Feed Belt Length: 2,679 mm Inclined Belt Length: 6,866 mm Gooseneck Length: 1,272 mm Incline: 35° Usable Width: 1,400 mm Sidewall Height (Inclined Belt): 800 mm Isdsu Thbxspfx Agpsa Cleat Height: 50 mm Cleat Spacing: 750 mm Belt Quality: EP 400/3, 3:1 (DIN Quality N) Overall Height: 4,515 mm Transport Dimensions (overall): 11,148 x 2,502 mm (L x W) Technical Data for Contactless Personnel Protection System: Manufacturer: BOREMA Umwelttechnik AG, Switzerland Model: APSS iBOR 22 Year of Manufacture: 2023 Condition of the Baling System: Due to its low operating time of only 1,851 pump hours and the exclusive processing of paper, cardboard, and film, the entire plant is in very good condition. Scope of Delivery: - Avermann baler, type AVOS 1410 BS-22/50, including wire feeding stations and bale chute - Avermann conveyor, type KGF GB 1500 - BOREMA personnel protection system, type APSS iBOR 22 Remarks: Complete documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection by appointment possible. We accept no liability for technical details or possible errors.

Stanje: pripravljen za uporabo (rabljen), Model: Balirka HSM V-press 1160 plus Pritisk (kN): 532 Učinkovitost (bale/uro): 1-2 Iedsra Nyujpfx Agpsa Maks. velikost bale (mm): 1200x1100x1000-1200 Dimenzije d x š x v (mm): 1780x1150x2985 Moč (kW): 7,5 Letnik 2007-2008, cena 5500 EUR Letnik 2009-2010, cena 5800 EUR Letnik 2011-2013, cena 6300 EUR Na voljo tudi balirke HSM v press 1160 max, letnik 2014-2015 Teža (kg): 2300 NA VOLJO TUDI LETNIKI 2017-2018 - 7500 EUR

Leto izdelave: 2008, obratovalne ure: 40.000 h, Stanje: dober (rabljeno), številka stroja/vozila: HBC 140 2x75kW 2008 (00191), Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Balenpers (2x75kW). Balenpers: Gewicht: 47.100 kg Bouwjaar: 2008 Hardox bodemplaat alleen Variabele kanaaldrukregeling Kunststof ventiel Hydraulische pomp aangedreven door frequentieregelaar Anti-ratten bekabeling Dieptefiltratie van olie Modem Draaiuren: 40.000 Deze pers kan ook volledig gereviseerd geleverd worden volgens de 'Bollegraaf OEM Certified Refurbishment standards'. Dit omvat 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van revisie Ijdpekcgf Hjfx Agpsa Reiniging & demontage Voordat de daadwerkelijke revisie plaatsvindt, wordt de balenpers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Spelingen Na demontage worden de toleranties van alle stalen onderdelen gemeten en waar nodig opnieuw gelast. Dit geldt in ieder geval voor de volgende componenten: • Perswagen (ram), • Frame, • Kanaal, • Voordruk-klep (pre-press-flap) Na demontage en inspectie wordt de perswagen opnieuw opgelast en voorzien van nieuwe perswielen. De beschermroosters en de voordruk-klep worden uitgedeukt en waar nodig gerepareerd. Opnieuw gespoten Na het meten van de toleranties en eventuele herstel- en laswerkzaamheden worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydrauliekleidingen en slangen worden vervangen. Hydraulische componenten worden herverpakt. De hydrauliekolie wordt ververst. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitkasten worden vervangen en teruggeplaatst op goed toegankelijke posities. Slijtdelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het kanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vervangen voor nieuwe. Cilinders: De cilinders worden herverpakt en indien nodig voorzien van een nieuwe chroomlaag of nieuwe cilinderstang. MCC-kast De schakelkast wordt gecontroleerd en gereinigd. Indien nodig worden elektronische componenten vernieuwd. De PLC en HMI (human interface) worden vervangen door de nieuwste Schneider M340 versie inclusief de nieuwste software.

Leto izdelave: 2012, Stanje: dober (rabljeno), Manufacturer: Gipo AG Model: B 1370 Year of manufacture: 2012 Feed opening size: 1,320 x 680 mm Includes: Isdpfsilh Efox Agpoa - Frame - Pre-screen - Electric motors for crusher and pre-screen. Spare jaws in stock!

Leto izdelave: 1972, Stanje: dober (rabljeno), Power generator, emergency power generator, generator, unit, power generator, emergency generator, power generating set -Manufacturer: PILLER/MWM -Power output: 730 kVA 50 Hz -Engine: MWM type TbRHS 518V16, output 850 HP, speed 1500 rpm -Generator: PILLER NKTB 4-1158 -Note: without control system -Individual components: see photos -Transport dimensions: 6 loading metres -Total weight: 8600 kg Isdpfxoivql Ij Agpea

Stanje: rabljeno, Leto izdelave: 2009, obratovalne ure: 20.536 h, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, lastna masa: 16.000 kg, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 20,536 hours (as of September 2024) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput rate: 300 m³/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying system: 4-fold vertical, fully automatic Throughput rates (depending on bulk density): — 30 kg/m³: approx. 6.0 t/h — 50 kg/m³: approx. 10.5 t/h — 100 kg/m³: approx. 17.5 t/h Bale weights at approx. 1.2 m bale length: up to 600 kg, depending on material Iodpfx Agsu Thypepsa PLC: Siemens S7-300 Display panel: pulsotronic Press dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight (press): 16 t Special features: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk goods of small grain size • Switch cabinet with air conditioning • Machine base raised by 200 mm Note: The machine is currently located in our workshop and is undergoing partial refurbishment. We expect the overhaul to be completed by the end of October, after which the machine will be tested and released for sale.

Stanje: nepreverjeno (rabljeno), Hydraulic press for compacting paper and similar materials. The machine was in working condition prior to disassembly. Press dimensions: Length: 4,850 mm, width: 1,370 mm, height: 3,000 mm (can be reduced to 2,300 mm). Weight approx. 3,500 - 4,000 kg. For further information, please contact: +48 539 660 495. Isdpfeh Nyfyox Agpsa

Stanje: pripravljen za uporabo (rabljen), Stožčasti drobilnik Svedala Znamka: Svedala Iedpfx Ajpn I H Tsgpja Tip: 36/H/MC Vključuje: osnovno šasijo in oljno enoto

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. Iodpfxjvwlqqj Agpsa The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.