Briketirni stiskalnica Comafer 70N 2012

Comafer 70N

Stanje: rabljeno, Skupna višina 6500 mm, tloris 2000 x 2000 mm, postavitev na prostem. Kompaktna filtrirna serija, model PKFP – 1 element – 1,92 x 1,92. Filtrirni sistem z stresanjem, nadtlakovno delovanje. Dolžina filtrirne vreče 2500 mm, premer 180 mm, filtrirna površina 105 m². 2 ventilatorja za surovi zrak, 2 cevi (premer 300 mm). 1 x ventilator KT 300, moč 15 kW, zmogljivost 6361 m³/h, letnik 1999. 1 x ventilator S 25 / 300, moč 7,5 kW, zmogljivost 7400 m³/h, letnik 1993. 1 x transportni ventilator 6,1 kW, zmogljivost 57 m³/min, letnik 1996. Skupen volumenski pretok cca 14.000 m³/h. Briketirni stroj Höcker Polytechnik tip BrikStar C 3 - 12.1225, motor 3,0 kW, premer briket 65 mm okrogle, kapaciteta cca 40-45 kg/h, odvisno od specifične teže materiala. Lokacija skladišča: Nattheim. Ledpfx Aovviytjl Nerk

Stanje: rabljeno, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal Treatment Plant / Thermal Chamber for Wood Modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on wood thickness and type. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler using thermal oil as the heat transfer medium. Technical Data: Capacity: 5,950 - 9,900 m³ of wood per year (based on 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions (LxWxH): 10,500 x 1,300 x 1,100 mm Minimum board thickness: 10 mm Power supply: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel Duplex EN 4462 Door opens hydraulically, 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, covered with 1 mm galvanized steel sheet Main Components: 1. Autoclave for heat treatment 2. Vacuum system for extracting air from the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 each side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Safety chimney made of stainless steel (300 mm diameter, 6,000 mm length) Function Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without disassembly, without transport or installation Disassembly, loading, and transport by us are possible as an option Errors in description and pricing reserved To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale takes place as is Technical data, description of condition, year of manufacture and scope of supply according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: "purchased as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Ljdpfx Aev Si Szel Nork Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.150 mm, skupna širina: 1.000 mm, skupna višina: 1.550 mm, vrsta vhodnega toka: trifazni, skupna masa: 700 kg, teža obdelovanca (maks.): 500 kg, vhodna napetost: 400 V, hitrost pomika os X: 30 m/min, širina transportnega traku: 400 mm, moč: 2 kW (2,72 KM), vhodna frekvenca: 50 Hz, SA250 or SA380 profile sanding machine for glazing bars, boards, beams and more. The SA380 brush sanding machine offers the following advantages: 1. Flexible: Handles all profiles including beams up to 400mm wide and 260mm high 2. Mobile: Mounted on wheels and can optionally be equipped with a mobile extraction unit 3. Powerful: Automatic feed speed of 13–30 m/min ensures high throughput 4. Superior results: 8-axis system with flexible Fladder brushes delivers excellent finishing: 4 brushes sand WITH and 4 sand AGAINST the feed direction (4 sides, 2 per side) 5. Safe: Fully enclosed construction, requiring only a single 120mm extraction connection. The SA250 and SA380 models are extremely robust and manufactured entirely in Denmark. We currently have two demonstration machines in stock. Ledjw Av Ivopfx Al Nork

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, as new (only approx. 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Group: For the application of oils, etc. Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm Membrane pump with max. capacity 18 l/min Frequency inverter for variable speed of the application roller Frequency inverter for variable speed of the counter-roller Transport belt speed adjustable from 3 to 14 m/min Stainless steel recovery trays Pad Group + Brush Group: For spreading and removing excess oils Touch screen control Manual height adjustment Transport belt speed adjustable from 3 to 14 m/min Max. working width: 300 mm Max. workpiece height: 50 mm Pad diameter: 300 mm Quick-change system for pads Brush dimensions L x D = 300 x 160 mm Quick-change system for brushes UV / LED Group Touch screen control Manual height adjustment Max. working width: 300 mm Ledsx Ah A Ajpfx Al Nsrk Max. workpiece height: 50 mm UV-LED power = 12 Watt/cm² Incl. extraction fan Transport belt made of Kevlar fabric Transport belt speed adjustable from 3 to 14 m/min Outfeed Transport Belt Length approx. 2,500 mm Max. working width: 300 mm Transport belt speed adjustable from 3 to 14 m/min Notice for used machines: • Subject to errors in technical data and prior sale. • Prices quoted are ex-location, loaded onto truck. • The machine has been cleaned and tested for functionality. • All machines are purchased as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines at our location. • Special agreements are only possible in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Popolnoma opremljena peč za termično modifikacijo lesa (thermo wood), vključuje: 15 m visok izoliran dimnik z dvojno steno iz nerjavečega jekla AISI 316L, dovodne/izhodne cevovode, tlačne ventile, manometre, zračni kompresor, celotno enoto za ogrevanje na lesne pelete, Siemens krmilno ploščo, nakladalno/razkladalno platformo za les, 2 kompleta distančnikov za les. Prostornina lesa 7...8 m3, odvisno od dimenzij in dolžine desk; Notranja komora za les do dolžine 7,5 m, skupna dolžina peči 10 m; Lrodpfovzub Hjx Al Nok Celoten cikel toplotne modifikacije ~24 h (segrevanje do ohlajanja); Nastavljiva temperatura do 230 °C ali več po potrebi; Potreben nazivni električni priključek 25 A, možno je delovanje zunaj omrežja z agregatom; Za proizvodnjo 1 m3 termično modificiranega lesa: 9...10 kWh + 55...60 kg lesnih pelet = 16...20 EUR (brez stroškov dela); Naše peči za termično modifikacijo lesa naredimo po željah naročnika v dolžinah od 3,6 do 9 m (prostornina lesa 3 do 9 m3).

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Ponujamo rabljeno hidro-toplotno napravo za obdelavo lesa IWT Moldrup-SPP Lodpfx Aleymxqae Njrk Industrijska naprava MOLDRUP-SPP je zasnovana za hidro-toplotno modifikacijo lesa premerov do 2.600 mm in dolžin do 12.000 mm. Izdelana je iz robustnega nerjavečega jekla ter konstruirana za neprekinjeno industrijsko proizvodnjo z v celoti avtomatiziranim PLC-krmiljenjem. Industrijska hidro-termična naprava za obdelavo lesa – Ø2.600 x 12.000 mm Industrijska naprava za hidro-toplotno obdelavo je namenjena učinkoviti in enakomerni termični modifikaciji lesa v nadzorovanem, kisika prostem okolju. Jedro naprave predstavlja robusten nerjaveč jekleni avtoklav Ø2.600 mm × 12.000 mm, ki omogoča obdelavo približno 15–22 m³ lesa na eno polnjenje, pri obratovalnem tlaku do 12 bar (absolutno). Popolnoma avtomatiziran sistem s PLC-krmiljenjem omogoča natančen nadzor vakuuma, tlaka, temperature in večfaznih procesnih ciklov. Integriran vakuumski sistem zagotavlja varno odstranjevanje kisika, medtem ko sistem ogrevanja s termalnim oljem skrbi za natančno upravljanje temperature tekom celotnega postopka. Celotna postavitev obsega tlačno posodo, ogrevalni sistem, vakuumsko črpalko, cirkulacijski ventilator, sistem za ravnanje s kondenzatom, nakladalni voziček ter varnostno opremo. Priloženi so tudi agregat za ogrevanje s termalnim oljem (boiler skid) in naprava za nadzor emisij. Tehnična dokumentacija je na voljo na zahtevo. Hidro-toplotna naprava za obdelavo lesa se prodaja v videnem/obstoječem stanju. Za vsa dodatna vprašanja ali več informacij nam lahko pišete ali nas pokličete.

Stanje: rabljeno, Lakirniška naprava znamke Promac, model S.3P.3L, sestavljena iz črpalke za barvo, treh lakirnih pištol, treh UV-svetilk za sušenje in transportnega traku širine 6200 x 10 mm, krmilne plošče, časovnikov ter pogonov z možnostjo izbire med ročnim in samodejnim načinom delovanja. Ljdpjivurxjfx Al Nsrk

Stanje: rabljeno, Leto izdelave: 2009, Premer odsesavanja: 250 mm Nazivni volumenski pretok: 3534 m³/h Ljdpfeyym A Sex Al Njrk Filtrirna površina: 22,6 m² Motor: 5,5 kW Briketiranje: zmogljivost ca.: 30 kg/h Premer briketa: 65 mm Motor: 3,0 kW Lokacija skladišča: Nattheim

Stanje: rabljeno, delovna širina: 250 mm, Machine à brosser / Brossage automatique Fabricant : Ceetec Modèle : A 250 Machine d'application avec brosses distributrices Dimensions des pièces : - Largeur max. : 250 mm - Hauteur max.: env. 100 mm - Longueur à partir de : env. 800 mm La machine à vernir est adaptée à l'application de peintures, produits de préservation du bois, ainsi qu'huiles et cires (par exemple, pour bardages extérieurs, lames de terrasse...) Données techniques : - Pompe à membrane électronique (aucun air comprimé nécessaire) - Buses de pulvérisation pour l'application de produit de protection du bois sur toutes les faces - 12 brosses distributrices rotatives sur 8 axes (garniture nylon standard) pour une application sur 4 faces des produits de revêtement Avance réglable par rouleau d'entraînement, env. 16–45 m/min Capacité env. 960 à 2 500 mètres/heure Raccordement électrique : 3 × 380 V (EU) Poids de la machine : env. 350 kg Lsdoyuaptjpfx Al Nork La machine sera nettoyée et contrôlée techniquement à la commande. Les conduits, la membrane et le set de brosses seront remplacés ! Délai de livraison : env. 3–4 semaines

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), I am selling a Renojava spraying machine, year 2013. Working width: 80 mm Element height: up to 80 mm Lsdpfx Alsh Ibivj Nsrk Feed conveyor length: 1.60 + 2.60 m Technology opening: 200 mm / Minimum element length: from 300 mm. Total length: 4.40 m Ring arm system for guns on both sides. Pump included. Feed system with motors. Good condition. Available immediately.