Spenjalniki

RUCHSER Jumbo Automatic Video

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, obratovalne ure: 13.117 h, nosilnost: 4.000 kg, vrsta goriva: plin, lastna masa: 6.000 kg, Linde H40T-02 naprodaj. Ogled je prav tako mogoč. Ncedpfx Aoxhgzneltew

Leto izdelave: 2026, stanje: novo, The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested according to BGI 739-1” seal. This makes it suitable for manual sanding work as well as for processing workpieces with hand-held power tools. The grinding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to the funnel-shaped design of the tray with an integrated air duct, the airflow is specifically directed towards the suction connection. Connection to an on-site extraction system can be made via either a 140 mm or a 160 mm diameter port, depending on the required extraction capacity. The folded edges on both long sides of the working surface also allow for end-face machining of workpieces. The extraction grids are aerodynamically aligned with the suction port, ensuring optimal extraction performance. For cleaning tasks inside the grinding table, the slatted beechwood deck can be removed and the air duct can be detached by loosening just a few screws. The grinding table is delivered pre-assembled; only the legs need to be attached and adjusted to the required working height. Your benefits: • Accessible from all 4 sides • Load capacity up to 150 kg • Manual, tool-free height adjustment with scale • Offset long sides for edge sanding • Workpiece-friendly removable beechwood grid Ncsdpfsfyadbox Altjw • Funnel-shaped air guidance to the suction port Technical specifications: • Suction connection: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at the connection at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working area (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Leto izdelave: 2024, stanje: novo, Voziček za prevoz in shranjevanje profilov v navpičnem položaju COMALL CARR 300 Q, nov Tehnične specifikacije: - 10 prekatov z delovno velikostjo 128 mm - Stične površine prevlečene z neopraskajočim in udarnoodpornim plastičnim materialom Njdpfef Nk H Hjx Altocw - 4 kolesa Ø 125 mm, od tega 2 z zavoro - Roke nastavljive v 5 različnih položajev - Podporna miza prevlečena z gumo - Nosilnost: 650 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, minimax ti 55es LL - Spindle Moulder Image shows T 55 i elite s standard version The professional joiner's machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting Stable steel/cast iron construction Large-dimension spindle unit made from cast iron, tiltable up to -45° to the rear Spindle speeds displayed via LEDs Quick and easy speed change thanks to eccentric clamp Reversible spindle rotation (clockwise/counter-clockwise) Height and tilt indication accurate to 0.1 mm Heavy-duty professional fence: fine adjustment via rack-and-pinion, digital readout, aluminum fence jaws, 3-position settings for fast repeatability Ncsdpfx Aledqzh Rstjw Scope of delivery: Aluminum fence jaws Curved guard Table extension left and right Model: minimax ti 55es LL Article No.: 5502252 Technical Data Table dimensions: 2500 x 655 mm Sliding table size: Useful spindle length: 125 mm Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tenoning cutter diameter: 320 mm Spindle tilt: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400 V/50 Hz/S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Window production line WEINIG consisting of: Machining center Unirex 3000 Univar 15 Unitex 15 Nedpfxoh H Iyxo Altecw

Stanje: novo, Leto izdelave: 2025, Suction nozzle diameter: 1 x 200 mm, 3 x 100 mm Nominal air flow rate: 1760 m³/h Residual dust content: 0.1 mg/m³ Chip collection volume: 240 l Filter cleaning: motorized Motor power: 3 kW Nsdpfx Ajhpmawjltocw Noise level: 78 dB(A) Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Weight: 178 kg

Stanje: kot nova (razstavni stroj), A demonstration double mitre metal cold circular saw with a 350 mm circular saw blade Cutting capacity Round/Rectangle 90°: 120 mm / 140 x 100 mm Round/Rectangle 45° right and left: 100 mm / 100 x 100 mm Blade speed: 18 / 36 m/min Ncedpfx Alopgmngotsw For further technical data, please refer to the PDF document. Technical data and dimensions subject to change and errors excepted.

Stanje: dober (rabljeno), Leto izdelave: 2010, Weinig Conturex C126 CNC Fensterfertigungsanlage Beschreibung: Nodpfxex Tq I Eo Altjcw Baujahr: 2010 Arbeitsbreite: 40–260 mm Arbeitshöhe: 25–150 mm PowerGrip-Spannsystem Tischbeladelänge Einzeltisch: 4 x 2280 mm Werkstücklänge Einzeltisch-Betrieb: 220–2700 mm Tischbeladelänge Doppeltisch (kombiniert): 2 x 4630 mm Werkstücklänge Doppeltisch-Betrieb ohne Folge: 220–5000 mm Werkstücklänge Doppeltisch-Betrieb mit Folge: 5000–6000 mm Komplett neuer PC & Software 2025 Vollständige Beschreibung auf Anfrage Verfügbar ca. Sommer 2026 (Trotz größter Sorgfalt sind alle Änderungen, Irrtümer bei technischen Daten, Preisen und weiteren Angaben vorbehalten. Keine Gewähr für Druckfehler! Verfügbarkeit vorbehaltlich Zwischenverkauf.) Preise exkl. Inserierungskosten MaschinenSucher Die besten Holzbearbeitungsmaschinen aus den Niederlanden

Stanje: rabljeno, Leto izdelave: 2003, Delovna višina 2300 mm, delovna širina 3500 mm, motor 1,5 kW. 3 tlačni cilindri od zgoraj, 2 s strani. Tlačna moč na valj: 3000 kg. Hod tlačnega valja do 200 mm. Hidravlika: 10–150 bar. Potrebni prostor: 3950 x 900 x 2550 mm. Teža: 670 kg. Skladišče: Nattheim. Ncjdpfjvvkmbox Altow

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Število motorjev: 1 kos Delovna dolžina: 2500 mm Ncedpfx Aovpr N Rsltsw Nadzor: ne Hecht ES 350, enostranska žaga za steklene profile ----- Nagibanje s pomočjo pnevmatskega sistema proti fiksnim oporami. 45º/90º/135º z pnevmatskim podajanjem žaginega lista pnevmatsko nagibanje s pomočjo ročnega nagibnega sistema z osnovo stroja, pnevmatsko napenjanje Žagin list HM 350 x 3,0/2,2/30 Z 100 Mere stojala žage: dolžina 700 mm, globina 1600 mm, višina 1500 mm Nastavljiva opora 1,5 m Podpora 1,5 m s podstavkom Nastavljiva opora 3 m Podaljšek podpore od 1,5 m na 3 m s podstavkom Vložki mize z utori za obdelane steklene profile HECHT ASB, ročna dolžinska opora z digitalnim prikazovalnikom, 2500 mm Z napravo za odsesavanje (tehnični podatki po navedbah proizvajalca – brez jamstva!)