Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, obratovalne ure: 44.590 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 200 t, širina odprtine za polnjenje: 2.000 mm, dolžina polnilne odprtine: 1.020 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.000 kg, kapaciteta rezervoarja za olje: 3.100 l, leto zadnje generalne obnove: 2026, volumenski pretok: 795 m³/h, Technical Data – Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 112 Year of manufacture: 2002, partially overhauled in December 2025 Operating hours: 44,590 hours, as of December 2025 Main press force: 200 t Specific press force: 16.5 kg/cm² Feed hopper dimensions: 2,000 x 1,020 mm Filling volume: 2.65 m³ Theoretical throughput: 795 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 75 kW Tying: 5-fold horizontal, fully automatic Throughput for MSW: approx. 48 to 54 t/hour, depending on material Hydraulic oil tank volume: 3,100 L Machine weight (baler): approx. 50.8 t Scope of delivery: 1 unit MACPRESSE baler, type 111A 1 set Operating manual with CE Declaration of Conformity, electrical and hydraulic schematic Notes: The machine has been serviced and partially overhauled in our workshop. The following work was performed and parts replaced: • Hydraulic oil tank drained and cleaned • Oil and air filters replaced • Filled with new hydraulic oil • All hydraulic hoses replaced • Dismantling of press ram, complete disassembly, mechanical parts freed and serviced Ppedpfxey Uruvo Aa Dot • Front two main running rollers replaced • Blades on press ram replaced • Main hydraulic cylinder disassembled and inspected, cylinder tube and piston rod checked, complete seal kit replaced • Counter blade in frame replaced • Blade gap set to approx. 3 mm • Upper steel guide rails in frame (left and right) replaced • Worn press floor cut out, base plate replaced with wear-resistant HARDOX steel • Tying and twisting unit dismantled and serviced, all twisting shafts and ball bearings replaced • All wire rolls in needle heads replaced • Wire cutters cleaned and adjusted, chains lubricated and tensioned • All wire guide rollers serviced • All door limit switches replaced • Air separator dismantled, disassembled and serviced • General maintenance performed Finally, the baler was subjected to a machine test in manual and automatic mode. See video for machine function test. The documentation (Operating manual, CE, electrical/hydraulic diagrams) is complete. Inspection by appointment is possible. We assume no liability for the technical information or possible errors.

Stanje: dober (rabljeno), Leto izdelave: 2015, obratovalne ure: 1.932 h, Funkcionalnost: popolnoma funkcionalen, Baler Presto CC 50 M, semi-automatic, year of manufacture 2015, with lift-and-tip device Podjyz R Etopfx Aa Djpt Technical Data: Manufacturer: Presto Model: CC 50 M Year of manufacture: 2015 Operating hours: 1,932 Pressing force: 50 t Cycle time: 52 s Motor power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Tying: triple, wire, manual Throughput at bulk density of 35 kg/m³ – 1.3 t 60 kg/m³ – 1.7 t 100 kg/m³ – 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4,000 kg Materials: Paper, cardboard, film The operating manual is available in German. Note: The machine is in good condition. It has been inspected and tested at our premises in 28816 Stuhr. You can find the video on our website or on our YouTube channel. Please note: All technical data is based on manufacturer’s information. We assume no liability for the specifications given or for any possible errors. The offer is subject to change, prior sale reserved, and can be revoked at any time. Inspections can be arranged by appointment. Sale is ex works, payment in advance, without warranty or guarantee.

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Bale Press Dixi 60 SLD, Year of Manufacture 2015 Manufacturer: Dixi Model: Dixi 60 SLD Year of Manufacture: 2015 Drive Power: 7.5 kW, 400 V / 32 A Feed Opening: 990 x 1,110 mm (W x L) Pedpfx Asy Ni Euoa Dspt Pressing Force: 60 t Press Cycle: approx. 47 s Bale Size: 800 x 1,100 x 1,200 mm (W x H x L) Bale Weight: approx. 370-410 kg Tying: 3-fold, manual Machine Dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine Weight: approx. 5,420 kg Materials: Paper, Cardboard, Film The press is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. Operating instructions and CE declaration are available. We are happy to answer any questions about the machine by phone from Monday to Thursday between 08:00 and 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data are based on the manufacturer's information. We do not accept any liability for the details provided or any possible errors. This offer is subject to change, prior sale, and revocation at any time. Inspection is possible by appointment. Sale is ex works, prepayment required, without warranty or guarantee.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, Bale Press Paal Pacomat II, year of manufacture 1979 Technical Data: Manufacturer: Paal Model: Pacomat II Year of manufacture: 1979 Drive power: 11 kW Pressing force: 27 t Channel cross-section: 700 x 1000 mm Filling opening: 1000 x 650 mm Throughput: approx. 60/115 m³/h Bale size: 700 x 1000 mm Bale weight: up to 400 kg Machine dimensions: approx. 7000 x 2000 x 2000 mm (LxWxH) Machine weight: approx. 5,200 kg Materials: Paper, cardboard, film Ppsdpfx Aoyz Salja Det Remarks: The machine is in fully functional condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find the video on our website or on our YouTube channel. Inspections, including under power, are possible by prior arrangement at any time. Please note: All technical data is based on manufacturer’s information. We accept no liability for the details provided or for any errors that may occur. All offers are subject to confirmation, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. The sale is ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Stanje: dober (rabljeno), Leto izdelave: 2017, obratovalne ure: 1.640 h, Funkcionalnost: popolnoma funkcionalen, Bale Press Presto CC 40 M, Year of Manufacture 2017 Technical Data: Manufacturer: Presto Model: CC 40 M Year of Manufacture: 2017 Pressing Force: 40 t Cycle Time: 34 s Drive Power: 15 kW Psdpoyz R Hqjfx Aa Dopt Filling Opening: 1080 x 1100 mm Filling Volume: 0.85 m³ Strapping: 4-fold, polyester strap, manual Throughput at loose bulk density of 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t/h 100 kg/m³ - 3.1 t/h Bale Dimensions: 750 x 1100 mm Bale Weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine Weight: approx. 3800 kg Materials: Paper, Cardboard, Film The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. The operating manual and CE declaration are available. Note: Channel discharge is fully automatic and adjustable. Please note: All technical data refer to the manufacturer's information. We assume no liability for the stated details or any potential errors. Offer is non-binding, subject to prior sale and can be revoked at any time. Viewings possible by appointment. Sale is ex works against prepayment, without warranty or guarantee.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 119 h, Funkcionalnost: popolnoma funkcionalen, Presse verticale à balles HSM V-Press 860 plus B, Année 2019 Données techniques : Fabricant : HSM Modèle : V-Press 860 plus B Année : 2019 Heures de fonctionnement : 119 Force de compression : 60 t Puissance motrice : 4 kW Ouverture de chargement : 1500 x 651 mm Hauteur de chargement : 1129 mm Dimensions de la balle : env. 1500 x 1200 x 780 mm Psdjy I Rnuspfx Aa Dept Poids de la balle : 550 kg Liaison : manuelle Temps de cycle théorique à vide : 25 s Rendement théorique : 32,5 m³/h Dimensions : 2099 x 1245 x 2985 mm (L x P x H) Poids : 2340 kg Matériaux : Film, papier, cartons Remarque : La presse est en très bon état. Veuillez noter : Toutes les données techniques sont basées sur les indications du fabricant. Nous n'assumons aucune responsabilité quant à l'exactitude des informations ou de possibles erreurs. Offres sous réserve, sous réserve de vente préalable et révocables à tout moment. Les visites sont possibles sur rendez-vous. Vente sur site, sans garantie ni responsabilité. Nos conditions de paiement : 100% paiement d'avance.

Stanje: dober (rabljeno), Leto izdelave: 1999, obratovalne ure: 50.702 h, Funkcionalnost: popolnoma funkcionalen, Balin stiskalnica Paal Konti 325 D/SO, letnik 1999 Pedpfoyzzgnsx Aa Dspt Tehnični podatki: Proizvajalec: Paal Tip: Paal Konti 325 D/SO Letnik: 1999 Obratovalne ure: 50.702 Stiskalna sila: 94 t Pogonska moč: 2 x 45 kW Skupna priključna moč: 104 kW Polnilna odprtina: 1020 x 1750 mm Dimenzije bal: 750 x 1100 mm, dolžina variabilna Vezava: 4-kratno samodejno Zmogljivost pri: 35 kg/m³ pribl. 14 t/h 60 kg/m³ pribl. 24 t/h 100 kg/m³ pribl. 38 t/h Teža bala: 525 do 800 kg Transportne dimenzije: pribl. 12.352 x 2.340 x 2.800 mm (DxŠxV) Teža stroja: pribl. 28.000 kg Materiali: Papir, karton, lahki mešani odpadki, plastični odpadki Prosimo upoštevajte: Vsi tehnični podatki temeljijo na informacijah proizvajalca. Za točnost navedenih podatkov in morebitne napake ne prevzemamo odgovornosti. Ponudba je nezavezujoča, vmesna prodaja in preklic sta pridržana. Ogled po dogovoru. Prodaja je možna izključno ob predplačilu, iz obrata, brez jamstva in garancije.

Stanje: dober (rabljeno), Leto izdelave: 2021, obratovalne ure: 245 h, Funkcionalnost: popolnoma funkcionalen, Vertical baler HSM V-Press 860 plus, year of manufacture 2021 Technical data: Manufacturer: HSM Model: V-Press 860 plus Year of manufacture: 2021 Operating hours: 245 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time (idle): 25 s Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Pjdey Tvzdepfx Aa Dopt Weight: 2213 kg Materials: Foil, paper, cardboard Note: The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on the manufacturer's information. We accept no liability for the information provided or for possible errors. Offers are subject to change, prior sale reserved, and may be withdrawn at any time. Viewings can be arranged by appointment. The sale is ex location, without warranty or guarantee. Our terms of payment are 100% advance payment.

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Vertical baler HSM VL 600, year of manufacture 2002 Pedpfoyz Sa Ssx Aa Dspt Technical Data: Manufacturer: HSM Model: HSM VL 600 Year of manufacture: 2002 Pressing force: 60 t Drive power: 7.5 kW Idle cycle time: 37 s Filling height: 1130 mm Filling opening: 1150 x 735 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Weight: 3575 kg Materials: Suitable for paper, cardboard, film, and car tyres The press is in good condition and has been inspected and tested. A video is available on our website or YouTube channel. Operating manual and CE declaration are available. Viewings, including powered operation, are possible by appointment at any time. Upon request, we can also conduct tests with your material for a handling fee. Please note: All technical data are based on the manufacturer's information. We accept no liability for the information provided or for any potential errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Viewings are possible by appointment. Sale is ex works, advance payment only, without warranty or guarantee.

Stanje: dober (rabljeno), Leto izdelave: 2013, obratovalne ure: 12.110 h, Just arrived Baling Press Paal Konti 325 G, Year of manufacture 2013 Technical specifications: Manufacturer: Paal Model: Konti 325 G Year of manufacture: 2013 Operating hours: 12,110 Pressing force: 100 t Drive power: 2 x 55 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, variable length Tying: 5-fold automatic Throughput at 35 kg/m³ approx. 13.5 t/h 60 kg/m³ approx. 21.5 t/h 100 kg/m³ approx. 33 t/h Bale weight up to 800 kg Transport dimensions approx. 12,216 x 2,530 x 2,800 mm (LxWxH) Machine weight approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste The baler is in good condition and has been inspected and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on information provided by the manufacturer. We do not accept liability for the specifications given or for any possible errors. This offer is subject to change, prior sale reserved, and may be withdrawn at any time. Viewings are possible by appointment. Ppsdpfxoy Twt Uj Aa Dst Sale is ex works, against prepayment, without warranty or guarantee.

Stanje: dober (rabljeno), Leto izdelave: 2021, obratovalne ure: 450 h, Funkcionalnost: popolnoma funkcionalen, Vertical baler HSM V-Press 860 plus, year of manufacture 2021 Technical data: Manufacturer: HSM Model: V-Press 860 plus Year of manufacture: 2021 Operating hours: 450 Podpjy R Srtsfx Aa Djpt Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time (idle): 25 s Theoretical throughput: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Suitable materials: film, paper, cardboard Comment: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data are based on information provided by the manufacturer. We do not assume any liability for the accuracy of the information or for any possible errors. Offers are subject to change, prior sale reserved, and may be withdrawn at any time. Viewings are possible by appointment. Sale is ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Available from June 2026 Baler Presto HPK 50 BS, year of manufacture 2011, with whirlulator and optional Horstmann chain belt conveyor Manufacturer: Presto Model: HPK 50 BS Year of manufacture: 2011 Drive: 30 kW Pressing force: 50 t Feed opening: 1600 x 1050 mm (LxW) Channel cross-section: 700 x 1100 mm Max. feed volume: 1.23 m³ Cycle time: 19 s Binding: 4-fold Throughput at 35 kg/m³: 6 t/h 60 kg/m³: 9.6 t/h 100 kg/m³: 13.9 t/h Bale weight: up to 500 kg Machine dimensions: 8500 x 1700 x 2400 mm (LxWxH) Machine weight: approx. 12,000 kg Chain Belt Conveyor Data Manufacturer: Horstmann Model: PK 1100/11 Year of manufacture: 2011 Belt width: 1100 mm Speed: approx. 0.2 m/s (max. 0.3 m/s) Feed section: approx. 3000 mm Inclined section: approx. 5000 mm Gooseneck: approx. 1000 mm The baler is still in operation and can be inspected under working conditions. It will be available from early June 2026. Please note: All technical data is based on information provided by the manufacturer. We do not assume any liability for the information provided or for possible errors. This offer is subject to prior sale, is non-binding and can be revoked at any time. Viewings are possible by appointment. Sale is ex works, subject to prior payment, and without warranty or guarantee. Ppjdpfx Aaey Ticzs Djt

Stanje: dober (rabljeno), Leto izdelave: 2021, obratovalne ure: 423 h, Funkcionalnost: popolnoma funkcionalen, Vertical baler HSM V-Press 860 plus, year of manufacture 2021 Technical data: Manufacturer: HSM Model: V-Press 860 plus Year of manufacture: 2021 Operating hours: 423 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Ppsdpfoy T E I Hjx Aa Dot Tying: manual Theoretical cycle time (idle): 25 s Theoretical press capacity: 12 m³/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: film, paper, cardboard Note: The baler is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to information provided by the manufacturer. We do not assume liability for the given information or any possible errors. Offers are subject to change, prior sale reserved, and can be withdrawn at any time. Inspections are possible by arrangement. The sale is ex location, without warranty or guarantee. Our payment condition is 100% prepayment.

Stanje: dober (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Bale Press Dixi 80 SLD, with lift/tip device, semi-automatic, year of manufacture 2017 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2017 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Suitable materials: paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Ppodpfxjy Ni I Ao Aa Dot We are happy to answer any questions about the machine by phone, Monday to Thursday from 08:00 to 14:00. On Fridays we are available from 08:00 to 13:00. Please note: All technical data is based on the manufacturer's specifications. We accept no liability for the information provided or for any errors. This offer is subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by appointment. Sale is ex works against advance payment, without warranty or guarantee.

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 5.812 h, Funkcionalnost: popolnoma funkcionalen, Baling Press Presto HPK 50 HS, year of manufacture 2012, with perforator and inclined conveyor (slat belt conveyor) Manufacturer: Presto Model: HPK 50 HS Year of manufacture: 2012 Operating hours: 5,812 Drive: 30 kW Pressing force: 50 t Podpfx Aaey R Tp Ts Dept Feed opening: 1,600 x 650 mm (L x W) Channel cross-section: 700 x 950 mm Max. feed volume: 1.06 m³ Cycle time: 19 s Tying: 4-fold Throughput at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8,420 x 1,900 x 2,400 mm (L x W x H) Machine weight: approx. 10,500 kg Perforator, hydraulically movable Drive power: 2 x 4 kW / 400 V Throughput: approx. 220 m³/h Clear feed opening: 1,380 x 1,200 mm Inclined conveyor Length: 7,931 mm Belt width: 1,400 mm Total width: 2,026 mm Incline: 29° Speed: 0.6 m/s Materials: Paper, cardboard, film, PET bottles Please note: All technical data is based on information provided by the manufacturer. We do not accept liability for the accuracy of these details or for any errors. Offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by appointment only. Sale is ex works, against prepayment, without warranty or guarantee.

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Baling Press Dixi 60 SLD, Year of Manufacture 2012 Ppodpfx Aaoy Ni Dqj Dot Manufacturer: Dixi Model: Dixi 60 SLD Year of manufacture: 2012 Drive power: 7.5 kW, 400 V / 32 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Press cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: threefold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Materials: Paper, cardboard, film The press is in good condition. If you have any questions regarding the machine, we are happy to answer your inquiries by phone from Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data are based on manufacturer information. We do not assume any liability for the information provided or for possible errors. This offer is subject to change, prior sale reserved, and can be withdrawn at any time. Viewings are possible by arrangement. The sale is made in advance payment, ex works, without warranty or guarantee.

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 28.155 h, Funkcionalnost: popolnoma funkcionalen, Bale Press Paal Konti 200 D, Year of Manufacture 2000 Technical Data: Manufacturer: Paal Model: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28,155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Ppsdpeyz R Uuefx Aa Dst Feed opening: 1020 x 1400 mm Bale dimensions: 750 x 1100 mm, length variable Binding: 4-fold automatic Throughput performance at 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions: approx. 10123 x 2152 x 2720 mm (LxWxH) Machine weight: approx. 15,000 kg Materials: Paper, cardboard, film The press is in good condition and has been inspected and tested. A video is available on our website or YouTube channel. The complete documentation is available. Please note: All technical data is based on manufacturer information. We accept no liability for the provided details or possible errors. This offer is subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. The sale is ex works against prepayment, without warranty or guarantee.

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Baler Dixi 60 SLS, Year of manufacture 2013 Technical Data: Manufacturer: Dixi Year of manufacture: 2013 Pressing force: 60 t Drive power: 11 kW, 32 A Filling opening: 990 x 1110 mm (W x L) Bale dimensions: 1100 x 800 x 1200 mm Bale weight: approx. 370–450 kg Binding: triple manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: Paper, Cardboard, Film The baler is in good, fully functional condition and has been checked and tested by us. You can find the video on our website or YouTube channel. If you have any questions about the machine, we will be happy to assist you by phone from Monday to Thursday, 08:00 to 14:00. On Fridays we are available from 08:00 to 13:00. Please note: All technical data is based on the manufacturer's specifications. We assume no liability for the details provided or for any unintentional errors. This offer is non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by arrangement. Ppedpfx Aajy Ni Hrj Dst Sale is ex works, payment in advance, without warranty or guarantee.

Stanje: dober (rabljeno), Leto izdelave: 2016, obratovalne ure: 1.060 h, Funkcionalnost: popolnoma funkcionalen, Baler Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2016 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2016 Operating hours: 1030 Drive power: 11 kW, 400 V / 32 A Ppjdpfxoy Ni Shs Aa Dot Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 3-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The baler is in very good condition. It has been checked and tested at our site in 28816 Stuhr. You can find the video on our website or our YouTube channel. The hydraulic hoses should be replaced. If you have any questions about the machine, we are happy to answer them by phone from Monday to Thursday between 08:00 and 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data refers to the manufacturer's information. We accept no liability for the provided details or possible errors. The offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by arrangement. The sale is ex works against prepayment, without warranty or guarantee.

Stanje: dober (rabljeno), Leto izdelave: 2021, obratovalne ure: 7 h, Funkcionalnost: popolnoma funkcionalen, Vertical baler HSM V-Press 860 plus, year of manufacture 2021 Technical data: Manufacturer: HSM Model: V-Press 860 plus Year of manufacture: 2021 Operating hours: 7 Pressing force: 60 t Drive power: 4 kW Ppjdpoy T E Iaofx Aa Djt Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Strapping: manual Theoretical idle cycle time: 25 s Theoretical throughput: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video is available on our website or our YouTube channel. Please note: All technical data is based on information provided by the manufacturer. We assume no liability for the information provided or for any possible errors. Offers are subject to change without notice; prior sale reserved; offers may be revoked at any time. Viewings can be arranged by appointment. Sale is ex works, without warranty or guarantee. Our payment terms: 100% advance payment.

Stanje: dober (rabljeno), Leto izdelave: 2019, obratovalne ure: 1.022 h, Funkcionalnost: popolnoma funkcionalen, Baler Presto CC 20 M, Year of Manufacture 2019 Technical Data: Manufacturer: Presto Model: CC 20 M Year of manufacture: 2019 Operating hours: 1,022 Pressing force: 20 t Cycle time: 24 s Drive power: 7.5 kW Feed opening: 1,030 x 750 mm Feed volume: 0.53 m³ Tying: 3-fold, manual Throughput rate at bulk density of 35 kg/m³ – 1.6 t 60 kg/m³ – 2.3 t 100 kg/m³ – 2.8 t Pedpfx Aaeyz R S He Dspt Bale size: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3,300 x 1,235 x 1,860 mm (LxWxH) Machine weight: approx. 2,500 kg Materials: Paper, cardboard, film Remarks: The machine is in good condition. It has been inspected and tested at our premises in 28816 Stuhr. You can find a video on our website or YouTube channel. Please note: All technical data is based on the manufacturer's information. We do not assume liability for the stated information or any possible errors. Offers are non-binding, subject to prior sale, and may be revoked at any time. Inspections can be arranged by appointment. Sale is ex-works, without warranty or guarantee.

Stanje: dober (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Bale Press Dixi 80 SLD, with Lift/Tilt Device, semi-automatic, year 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Ppjdpfx Asy Avhcsa Djt Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on the manufacturer's information. We do not accept liability for the stated specifications or potential errors. Offer is subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. Sale is ex works, advance payment only, without warranty or guarantee.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Vertical Baler Dixi 50 S, Year of Manufacture 2019, Very Good Condition Technical Specifications Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 50 S Year of Manufacture: 2019 Drive Power: 7.5 kW Pressing Force: 50 t Pressing Cycle: 23 s Filling Opening: 1200 x 620 mm Filling Height: 1000 mm Bale Size: 1200 x 800 x 830 mm Bale Weight: 300-350 kg Tying: Manual Transport Dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Ppodpfx Aaoybapaj Dst Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, styrofoam, fleece, glass wool, etc. The operating manual and EC Declaration of Conformity are available in German. Remarks: The machine is in very good condition. It has been inspected and tested at our site in 28816 Stuhr. You can find the video on our website or on our YouTube channel. Viewing, including under power, is possible at any time by arrangement. On request, we can also carry out tests with your material for a service fee. If you have any questions regarding the machine, we are happy to assist you by phone from Monday to Thursday from 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data is based on manufacturer specifications. We assume no liability for the details provided or for any errors. Offers are non-binding, subject to prior sale, and may be withdrawn at any time. Viewings by prior arrangement. Sale is ex location, without warranty or guarantee.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Vertical baling press Dixi 50 S, year of manufacture 2020, very good condition Technical data: Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 50 S Year of manufacture: 2020 Drive power: 7.5 kW Pressing force: 50 t Pressing cycle: 23 s Feed opening: 1200 x 620 mm Feed height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300–350 kg Binding: manual Transport dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Suitable materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, Styrofoam, fleece, glass wool, etc. The operating manual and EC declaration of conformity are available in German. Remark: The machine is in very good, as-new condition. The seals on both cylinders for the retaining clamps have been renewed. The machine has been inspected and tested at our site in 28816 Stuhr. A video is available on our website or our YouTube channel. Viewing, including under power, is possible at any time by prior arrangement. Upon request, we can also perform test runs with your material for a handling fee. Psdpeybak Rsfx Aa Dspt For questions about the machine, we are happy to assist you by phone from Monday to Thursday, 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We do not accept any liability for the information given or for possible errors. Offers are subject to change, prior sale reserved, and may be revoked at any time. Viewings are possible by arrangement. The sale is ex location, without warranty or guarantee.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Vertical Baler Dixi 50 S, Year of Manufacture 2019, Very Good Condition Ppedpfx Aeybal Uja Det Technical Specifications Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 50 S Year of Manufacture: 2019 Drive Power: 7.5 kW Pressing Force: 50 t Pressing Cycle: 23 s Filling Opening: 1200 x 620 mm Filling Height: 1000 mm Bale Size: 1200 x 800 x 830 mm Bale Weight: 300-350 kg Tying: Manual Transport Dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, styrofoam, fleece, glass wool, etc. The operating manual and EC Declaration of Conformity are available in German. Remarks: The machine is in very good condition. It has been inspected and tested at our site in 28816 Stuhr. You can find the video on our website or on our YouTube channel. Viewing, including under power, is possible at any time by arrangement. On request, we can also carry out tests with your material for a service fee. If you have any questions regarding the machine, we are happy to assist you by phone from Monday to Thursday from 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data is based on manufacturer specifications. We assume no liability for the details provided or for any errors. Offers are non-binding, subject to prior sale, and may be withdrawn at any time. Viewings by prior arrangement. Sale is ex location, without warranty or guarantee.