Ekscentrične stiskalnice, enojni steber, nad 100 t nakup rabljenega (117)

Stanje: rabljeno, Leto izdelave: 1977, Press force 250 t Fpsdovuuaiepfx Akwji Stroke 40 - 190 mm Strokes per minute 40 /min Throat depth 500 mm Clearance between frame walls 1050 mm Shut height 615 mm Table area 1380 x 880 mm Die opening in table 450 mm Table height above floor 800 mm Ram area 1200 x 800 mm Ram adjustment 125 mm Drive power 22.0 kW Weight 24.0 t Required space approx. 2.0 x 2.5 x 3.95 m (L x W x H) Approved for manual loading operations according to German accident prevention regulations (UVV) With motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic ram weight compensation, motorized ram adjustment, manual stroke adjustment, motorized central lubrication, bolster plate, two-hand operation

Stanje: rabljeno, Leto izdelave: 1989, Pressure: 250 t Stroke: 20 - 190 mm Strokes per minute: 24 / 48 Throat depth: 500 mm Clearance between frame walls: 1000 mm Installation height: 615 mm Table area: 1400 x 880 mm Pass-through opening in table: 450/500 mm Table height above floor: 800 mm Ram area: 1380 x 620 mm Ram adjustment: 125 mm Drive power: 29.0 kW Weight: 27.0 t Required floor space approx. 2.0 x 2.6 x 4.1 m (L x W x H) Approved for manual loading operations according to German Accident Prevention Regulations (UVV). Fpjdpfx Aovut Ncekwoi Equipped with pole-changeable motor, pneumatic clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram counterbalance, motorized ram adjustment, semi-automatic stroke adjustment, motorized central lubrication, two-hand operation control. The machine can be inspected under power at our warehouse.

Stanje: novo, Condition: New Delivery time: approx. 14 - 16 weeks after order Country of origin: Turkey Fodpowiqu Rjfx Akwspi Price: €92,600 Leasing rate: €1,750.14 Pressing force: 160 t Nominal pressing force at 6 mm Table length: 750 mm Table width: 1100 mm Drop-through hole in table: 230 mm Stroke: 1 - 172 mm Strokes per minute: 45 1/min Ram guides: 6 Ram adjustment: 100 mm Pin hole in ram: 80 mm Throat depth: 375 mm Installation height: 540 mm Motor: 11 kW Length: 1,890 mm Width: 1,950 mm Height: 3,650 mm Weight: 15,500 kg Welded steel frame construction 6-way ram guidance Pneumatic clutch-brake combination Safety enclosure with light barrier and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable strokes per minute via frequency inverter Operating modes: • Setup mode • Two-hand operation • Foot operation • 2-cycle operation via light barriers • Continuous operation Touchscreen for: • Stroke counter with preselection for continuous operation • Stroke rate adjustment • Lubrication intervals and runtime • Alarm messages • Motor rotation direction • Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipped in accordance with CE regulations Sample photos, illustration incl. optionally available clamping plate OPTIONS: • Vibration pads €192.00 • Clamping plate on request • Hydraulic overload protection on request etc.

Stanje: novo, Stanje: novo Dobavni rok: cca. 3–6 tednov od naročila Država izvora: Turčija Cena: 79.900 € Leasing obrok: 1.510,11 € Tlačna sila: 130 t Dolžina mize: 1000 mm Širina mize: 640 mm Prehodna odprtina v mizi: 210 mm Fpedpfx Akjynnbqjwsi Hod: 5 - 110 mm Število hodov: 60 1/min Bat: 630x400 mm Nastavitev bata: 90 mm Izsev: 330 mm Motor: 11 kW Dolžina: 2200 mm Širina: 1372 mm Višina: 3000 mm Teža: 8200 kg 8-kratno vodilo bata Sprednja zaščita z varovalno svetlobno zaveso Ročna nastavitev bata Mehanska zaščita pred preobremenitvijo Samodejno mazanje Oprema v skladu s CE predpisi Navodila za uporabo v NEMŠČINI in ANGLEŠČINI

Stanje: rabljeno, Tehnične podrobnosti: Fpedeu N Dfhopfx Akwji Tlak: 160 t Hod berila: 32...140 mm Število hodov: 50 hodov/min Izservanje: 400 mm Vgradna višina: 400 mm Nastavitev berilnega vozička: 100 mm Velikost mize: 1000x750 (ali vpenjalne plošče) mm Površina berila: 850x630 mm Luknja za zatič: 400x360 mm Skupna potrebna moč: 15,5 kW Teža stroja cca: cca 10,5 t Mere D-Š-V: električna omara 1,06x0,6x2,0 mm Mere D x Š x V: D:2,9 x Š:1,25 x V:3,3 m - Možen posamezni in/ali neprekinjeni hod - 2 vpenjalni plošči (1200x760x90 mm in 1200x760x70 mm, luknja za zatič Ø=300 mm) - Možno upravljanje z nogo in roko - Zadnji pregled opravljen leta 2006 - 80A; komprimiran zrak 6 kp/cm²; količina olja cca. 30 litrov v skladu z normo.

Stanje: rabljeno, Leto izdelave: 1957, Tlak 100 t Izvlek 315 mm Hod 30 - 160 mm Število hodov 40 /min Razdalja med mizo in batom, velik hod zgoraj, nastavljivo zgoraj 460 mm Površina mize 910 x 680 mm Fjdpfxevzxnwj Akwspi Prehodna odprtina v mizi 400 mm Višina mize nad tlemi 800 mm Prehod med stenami ohišja 400 mm Površina bata 630 x 400 mm Nastavitev bata 80 mm Pogonska moč 7,5 kW Teža 7,5 t Potrebni prostor (ŠxGxV) 1,7 x 2,0 x 3,0 m POSEBNA AKCIJA prodaja se kot stoji in leži BREZ zagona / BREZ drugih del natovorjeno na tovornjak brezplačno

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, moč: 11 kW (14,96 KM), vhodna napetost: 200 V, stiskalna sila: 160 t, dolžina mize: 600 mm, skupna masa: 19.000 kg, prebijalna sila: 160 t, vrsta nastavitve višine: električni, vgradna višina: 1.900 mm, nastavitev hidravličnega cilindra: 100 mm, nastavitev hoda: 130 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, Manufacturer: AIDA Model: NC2-160 Pressing force: 160 t Year of manufacture: approx. 1991 Fpjdou D Dhxjpfx Akwji Stroke length: 130 mm Shut height (adjustable): 285–335 mm Table dimensions: 1900 x 600 mm Ram dimensions: 1360 x 585 mm Electrical rating: 3x200V (!!), 15 kW – Japanese standard Net weight: 19,000 kg Dimensions: 2140 x 2210 x 3175 mm Automatic lubrication system. Optionally available with decoiler and straightening machine.

Stanje: rabljeno, Leto izdelave: 1990, EBU 160t, TIP HK160F TLAK: 160 t DIMENZIJE ZGORNJE PLOŠČE: 1000 x 500 mm DIMENZIJE SPODNJE PLOŠČE: 1200 x 800 mm ŠTEVILO UDARCEV NA MINUTO: 80 DOLŽINA UDARCA: 20–200 mm RAZDALJA MED PLOŠČAMI: 600 mm MOČ: 15 kW TEŽA: 17.500 kg Fjdpfxjzktzys Akwopi STROJ JE V ODLIČNEM STANJU IN PRIPRAVLJEN ZA NALOŽITEV.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1979, moč: 38 kW (51,67 KM), hod: 400 mm, širina mize: 1.320 mm, dolžina mize: 1.000 mm, skupna višina: 6.300 mm, razdalja med stojali: 1.000 mm, nastavitev hidravličnega cilindra: 200 mm, Тримерова преса с натиск 400 тона ERFURT, Германия, модел PKZ 400 Fjdpfolnlpxsx Akwepi

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 22,06 kW (29,99 KM), prebijalna sila: 250 t, Eccentric press EBU, suitable for insertion work, UV-tested Stroke adjustment from 10 to 140 mm Fedpfsv T Dapjx Akwepi Ram adjustment 80 mm Stroke rate 50 strokes/min.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1975, Funkcionalnost: popolnoma funkcionalen, globina grla: 450 mm, very good condition! with gearbox: Capacity: 300 tons Fpjdpfx Akszc Rw Rswji Stroke rate: 35 strokes Throat depth: 450 mm - pneumatic clutch - ram weight compensation Ram stroke: 20 - 140 mm Ram adjustment: 80 mm Motor power: 30 HP

Stanje: rabljeno, Leto izdelave: 2018, Nominal pressing force: 4,000 kN Ram stroke, adjustable in steps: 30 ... 160 mm Ram adjustment: 180 mm Throat depth: 515 mm Strokes per minute, idle: 45 / min Option: Infinitely variable speed: 10 … 60 / min Fpsdpow Rbxzofx Akwji Die installation height at maximum stroke (bottom) and adjustment (top): 660 mm Table clamping surface (W x D): 1,700 x 1,000 mm Table height above floor: 1,005 mm Ram clamping surface (W x D): 1,100 x 800 mm Pin hole in ram: 65 mm Main motor power: 45 kW Approximate machine height: 4,325 mm Machine weight: 33,000 kg Control system: - Press safety control with redundant design and self-diagnosis, as well as status and error display in plain text Infinitely variable stroke rate adjustment in the range of 10 ... 60 strokes/min using ABB frequency inverter Control variant: TFT color touchscreen including electronic cam controller with tool management and tool protection, with color touchscreen visualization, SIEMENS PLC S7-300, tool data management, counting systems, data transmission via Profibus Fully automatic stroke and ram adjustment Rigidly welded tie rods, clear spacing between tie rods: 1,345 mm Swiveling main control console Contactless safety device - LUMIFLEX BWS on the front of the machine table or die space, each mounted on the tie rods

Stanje: rabljeno, Leto izdelave: 1985, Technical details: Fedpfx Akou Nfh Dewspi Pressure: 100 t Stroke rate: 35-100 strokes/min Throat depth: 360 mm Ram adjustment: 20-130 mm Ram surface: 750x550 mm Clamping plate on table: 1000x640 mm Stroke adjustment: 90 mm Clearance between uprights (longitudinal/lateral): 610x500 / 440x550 mm Shut height (table/ram bottom): 300 mm Total power requirement: 17.5 kW Machine weight approx.: 7.0 t Machine dimensions approx. LxWxH: 1.9x1.4x2.7 m - The ram plate is equipped with 5 longitudinal T-slots - Center hole = 50 mm This press is currently for sale without control system. Completion to customer specification available as an option. i.e.

Stanje: rabljeno, Leto izdelave: 1979, Technical Details: Pressure: 250 t Ram stroke: 40–160 mm Throat depth: 545 mm Ram adjustment: 110 mm Table size: 1250 x 800 x 100 mm Fsdpfou Nfinex Akwopi Maximum distance between table and ram: 670 mm Drawing force: 16 t Table height above floor: 1000 mm Ram clamping surface: 900 x 670 x 100 mm Clearance between uprights: 500 x 400 mm Total power requirement: 23 kW Approx. machine weight: 16.6 t Machine dimensions: 2.8 x 1.4 x 3.7 m Control cabinet dimensions LxWxH: 1.15 x 0.6 x 2.1 m Drawing unit: Ejector force and blankholder force each 16 t Table fitted with 4 parallel T-slots (1250 x 800 x 100 mm) Ram plate fitted with 4 radial T-slots Accessories: - Steel plate 1170 x 860 x 80 mm

Stanje: rabljeno, Leto izdelave: 1981, Technical details: Fodpfx Asu Nfklskwspi Pressing force: 250 t Ram stroke: 36...126 mm Throat depth: 400 mm Ram adjustment: 110 mm Ram clamping surface: 630 x 500 x 100 mm Installation height: 400 mm Table size: 1000 x 750 x 100 mm Table height above floor: 1000 mm Total power requirement: 23.0 kW Machine weight approx.: 13.5 t Control cabinet dimensions (LxWxH): 1.1 x 0.7 x 1.3 m Machine dimensions approx. (LxWxH): 3.0 x 1.3 x 3.3 m Further features: - Operation via two-hand control stand with foot pedal - 4 foot plates, Ø 220 mm

Stanje: rabljeno, Leto izdelave: 1983, Technical details: Pressing force: 100 t Stroke: fixed 20 mm Strokes per minute: 55 spm Throat depth: 355 mm Ram bore: Ø 36 mm Table size: 900x640 mm Ram adjustment: 150 mm Ram clamping area: 500x415 mm Height above floor: 800 mm Maximum distance between table and ram: 390 mm Passage opening in table: Ø 330 mm Total power requirement: 11 kW Approx. machine weight: 7.5 t Approx. machine dimensions LxWxH: 1.46x1.58x2.57 m Transport dimensions LxWxH: 1.9x1.6x3.1 m The press is supplied without machine control panel/electrical cabinet. (Control system can be supplied optionally.) Complete electric single drive for 3x 380 Volt, 50 Hz Belt and ram guard Fodpfxsu Nfizj Akwepi Friction clutch and brake unit PRESSMATIC

Stanje: rabljeno, Technical details: Pressure: 250 t Stroke: Continuous idle 40 mm Ram stroke: adjustable 36 - 126 mm Ram adjustability: 110 mm Ram clamping area: 630 x 500 mm (L x W) Clamping surface: 1000 x 750 x 100 mm Distance table / ram: 400-526 mm Passage opening in table: 400 x 360 mm Operating pressure: 0.6 MPa Ejector stroke: 63 mm Throat depth: 400 mm Total power requirement: approx. 20.0 kW Control cabinet dimensions (L x W x H): 1.2 x 0.65 x 2.1 m Fpsdpfxju N Ddwe Akwji Machine dimensions approx. (L x W x H): 2.9 x 1.2 x 3.4 m - Two-hand operation - Operator stand Accessories: - Base plate 2200 x 1500 x 40 mm

Stanje: rabljeno, Leto izdelave: 1980, Technical details: Fedpfx Aou N A Uuekwepi Pressing force: 400 t Stroke: 40 - 140 mm Strokes/min, continuous: 32 Throat depth: 400 mm Shut height, min/max: 450/590 mm Ram adjustment: 125 mm Table size: 1250 x 750 mm Height above floor: 1130 mm Total power requirement: approx. 31.5 kW Machine weight, approx.: 23.0 t Machine dimensions (LxWxH): 3.7 x 1.7 x 3.9 m Control cabinet dimensions (LxWxH): 1.0 x 0.7 x 2.1 m Additional features: - Clamping plate L:1260 x W:760 x H:100 mm - Equipped with drawing device, force: 250 kN, stroke approx. 83 mm - Operation via control panel No UVV (accident prevention regulations) In operation.

Stanje: rabljeno, Leto izdelave: 1980, Détails techniques : Pression : 160 t Fedpfxeu N A U Is Akwjpi Course : 20-160 mm Profondeur de col de cygne : 400 mm Réglage du coulisseau : 120 mm Nombre de courses : 71 cp/min Hauteur d'installation table/coulisseau en haut : 720 mm (course 160 mm) Hauteur d'installation table/coulisseau en bas : 560 mm (course 160 mm) Surface du coulisseau : 900 x 660 mm Passage entre les montants : 500 x 450 mm Surface de la table (LxlxØ) : 1200 x 750 x 100 mm Puissance totale requise : env. 23,0 kW Poids de la machine env. : 15,0 t Dimensions de la machine (LxlxH) : 2,7 x 1,5 x 3,45 m Dimensions de l'armoire électrique (LxlxH) : 2,0 x 0,65 x 2,15 m Commande via pupitre/pupitre sur pied/pédale et boîtier de commande manuel. La presse peut être proposée selon deux options : 1ère option : Vente en l'état, non raccordée, non complète, non fonctionnelle. 2ème option : La presse est remise à neuf, toutes les pièces sont remplacées, rénovées et contrôlées. La presse est entièrement révisée. Pour toute demande concernant cette presse, veuillez indiquer l'option d'offre souhaitée ! i. D.

Stanje: rabljeno, Leto izdelave: 1983, Technical details: Pressure: 100 t Stroke: 20 mm fixed Strokes per minute: 55 Table surface: 900x640 mm Throat depth: 355 mm Ram adjustment: 150 mm Pin hole in ram: Ø 36 mm Ram clamping surface: 500x415 mm Height above floor level: 800 mm Max. distance between table and ram: 390 mm Die opening in table: Ø 330 mm Total power requirement: 11 kW Machine weight approx.: 7.5 t Transport dimensions (LxWxH): 1.9x1.6x3.1 m Press is without machine control panel/control cabinet (installation optional). Complete electric separate drive for 3x 380 Volts, 50 Hz Belt and ram guard Fsdpfx Aju Nfi Ujkwspi Friction clutch and brake unit PRESSMATIC

Stanje: rabljeno, Tehnične podrobnosti: Pritisk: 160 t Izvitek: 760 mm Fpedpsu Nfhqofx Akwsi Hod bata: 32...140 mm Razdalja med mizo in batom: 400 mm Nastavitev bata: 100 mm Število hodov: 50 hodov/min Miza: 760x1000x95 mm Prehodna odprtina v mizi: 400x350 mm Vpenjalna površina bata: 630x850 mm Vpenjalna plošča: 760x1010x92 mm Skupna potreba po moči: 15 kW Teža stroja pribl.: 6,2 t Dimenzije stroja pribl. D x Š x V: 2,9x1,2x3,4 m Dimenzije elektro omare D x Š x V: 0,8x0,45x2,1 m Upravljanje preko dvomičnega upravljanja Stroj je možno demonstrirati. i.D. *

Stanje: novo, Condition: New Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 Pressing force: 100 t Nominal pressing force at 4.5 mm Table length: 700 mm Table width: 1,000 mm Pass-through hole in table: 210 mm Stroke: 1 - 132 mm Strokes per minute: 58 1/min Ram guides: 6 Fjdjwiqq Sopfx Akwopi Ram adjustment: 90 mm Ram bore diameter: 60 mm Throat depth: 300 mm Installation height: 445 mm Motor: 7.5 kW Length: 1,650 mm Width: 1,545 mm Height: 3,011 mm Weight: 7,000 kg Welded steel frame construction Crankshaft made of AISI4140 (42 CrMo4), ground Bronze bearings made of SnBz-12 6-way ram guiding Pneumatic clutch-brake combination 7" touchscreen Pneumatic ram balance Drive gears in oil bath PLC for safety functions Work area safeguarded by light curtain Power ram adjustment Mechanical overload protection Dual-hand and foot pedal operation Adjustable stroke rate (inverter) Automatic central lubrication Machine and equipment in accordance with CE regulations OPTIONS: Vibration pads €192.00 Clamping plate €2,580.00

Stanje: rabljeno,

Stanje: dober (rabljeno), Manufacturer: DIGÉP Model: SD 100 Fpodpem Uc R Asfx Akwji

Stanje: rabljeno, Leto izdelave: 1988, Pressure: 200 t Outreach: 450 mm Stroke: 30 - 140 mm Table clamping surface: 1100 x 850 mm Installation height: 500 mm Ram surface: 800 x 600 mm Ram adjustment: 110 mm Fpsdpfxjvb I Ito Akwji Pin hole in ram: diameter 65 mm x depth 105 mm Strokes per minute: 45 Total power requirement: 15 kW Machine weight approx.: 14.2 t Machine dimensions (L x W x H): 3.18 x 2.09 x 3.05 m