C Gestell Presse nakup rabljenega (63.268)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, moč: 11 kW (14,96 KM), vhodna napetost: 200 V, stiskalna sila: 160 t, dolžina mize: 600 mm, skupna masa: 19.000 kg, prebijalna sila: 160 t, vrsta nastavitve višine: električni, vgradna višina: 1.900 mm, nastavitev hidravličnega cilindra: 100 mm, nastavitev hoda: 130 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, Manufacturer: AIDA Model: NC2-160 Pressing force: 160 t Year of manufacture: approx. 1991 Stroke length: 130 mm Shut height (adjustable): 285–335 mm Table dimensions: 1900 x 600 mm Ram dimensions: 1360 x 585 mm Electrical rating: 3x200V (!!), 15 kW – Japanese standard Net weight: 19,000 kg Fedpfou D Dhxjx Ahmeph Dimensions: 2140 x 2210 x 3175 mm Automatic lubrication system. Optionally available with decoiler and straightening machine.

Stanje: rabljeno, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture: approx. 1977 Rated pressing force: 63 t Pressing force: 50 tonnes (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. daylight opening: approx. 730 mm Table height above floor: 970 mm Fodpodzp Trjfx Ahmeph Hydraulic tank capacity: 600 l Drive power: 15 kW Power connection: 380 V, 50 Hz - Hydraulic drawing cushion beneath the table with bored holes through the table plate - Two-hand operation - Electrical control cabinet damaged Space requirement (L x W x H): 2000 x 1200 x 3420 mm Weight: approx. 5 t The machine is operational, but the control cabinet is mechanically damaged. During test operation, the machine achieves a pressing force of 50 tonnes; it is presumed that a pressure relief valve is opening.

Stanje: rabljeno, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Fedjv Uraajpfx Ahmoph Eccentric toggle press, eccentric press Year of manufacture: approx. 1984 Pressing force: 60 tons Throat depth: 160 mm Table size: 580 x 360 mm Slide area: Ø 270 mm Clamping pin bore: Ø 40 mm Distance between uprights: 218 mm Slide stroke: 60 mm Ejector stroke: 15 mm Slide adjustment: 30 mm Max. installation height: 300 mm (with intermediate table plate) Strokes per minute: 70 SPM Motor speed: 1400 rpm Motor power: 3 kW Power supply: 380 Volt, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Intermediate table plate L x W x H 580 x 360 x 58 mm, with holes and cut-outs - Mechanical ejector, ejector system in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety guard, UNIDOR safety enclosure with pneumatic front shield - Cam switchgear BALLUFF Space requirement L x W x H 1400 x 1200 x 1850 mm Weight: 3 tons Good condition

Stanje: rabljeno, Single-Column Hydraulic Press with Drawing Cushion RÖCHER Type REP 100.01 SZ Hydraulic Drawing Press Machine No. 15,499 Year of manufacture: 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with through-hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Drawing cushion force: 40 tons (400 kN) Drawing cushion stroke: 200 mm Drawing cushion surface: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Max. hydraulic operating pressure: 300 bar Hydraulic tank capacity: 700 liters Rapid approach speed: approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Electrical connection: 400 Volt, 50 Hz (63 Amps) - Operation and programming via control panel PC 670 touch panel, keyboard and mouse - Machine control via Siemens S7-300 PLC - Ram stroke and pressing force programmable via the control system - Drawing cushion with drawing and ejector function - Drawing cushion force infinitely adjustable - Ram and drawing cushion fitted with direct travel measurement systems - Drawing cushion can be moved in and out under the press area, for punching operations using the through-hole - Floor-level installation, drawing cushion does not extend into the floor - Pressure and travel shut-off - Fixed stop with indirect measuring system - Pressure holding time infinitely programmable Fjdsyupulopfx Ahmoph - Table surface with holes for drawing cushion ram rods - Ram with ejector - Cutting stroke damping - Stroke release via two-hand operation, foot switch, hand lever, and push button on the control panel - LEUZE light barrier as reach-in protection in safety mode - Front mirror columns on the press table laterally adjustable - Electrical control cabinet mounted on the machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose lines for tool temperature control or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirement for the press (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Stanje: rabljeno, Leto izdelave: 1989, Skupna stiskalna sila: 80 t Grlo stroja: 280 mm Hod bata: 8 - 140 mm Nastavitev bata: 100 mm Vgradna višina (hod spodaj, nastavitev zgoraj): 520 mm Vpenjalna površina mize cca: 850 x 670 mm Vpenjalna površina bata cca: 550 x 400 mm Prebojna odprtina v mizi: 250 x 180 mm Št. hodov na minuto: 20 - 100 min-1 Potrebna moč: 7,5 kW Dimenzije D x Š x V: 2210 x 1510 x 2750 mm Količina olja cca: 50 l Maks. teža orodja na batu: 300 kg Teža stroja cca: 8,3 t Fpodpfxsy Hqz Ss Ahmjh

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, stiskalna sila: 15 t, Hidralmac C-frame Press – 15 t – Assembly Press – Manual Combination Press For sale is a compact hydraulic C-frame combination press from Hidralmac with a press force of 15 t. This machine is a custom manual version and is ideal for flexible assembly, straightening, and pressing operations in workshop and service environments. The table can be swung out to the left. The lower base plate can be inserted at three different heights. The press ram can be manually lowered using the cross handle. Special features of this press: The operator can apply very precise pressure from 0 to 1.5 t. This is especially important, for example, when pressing in ball bearings. We have supplied this press type multiple times to the aerospace industry, where precise and careful operation is vital. Once the precise positioning is done, the hand pump allows you to build up a pressure of up to 15 t. ##### Technical Data & Information: Assembly/Disassembly Press – 15 t – 270 × 600 mm ==== General Information - Design: C-frame / manual hydraulic press - Manufacturer: DURENDUS - Press force: 0–15 t - Table size: 270 × 600 mm - Installation height: 650 / 800 mm - Table height from floor: 750 mm - Table hole: Ø 60 mm Fpjdpfx Ahjfhcc Iomoh - Distance from lower recess to table: 450 mm - Overall dimensions (W×D×H): 900 × 850 × 2,300 mm - Total weight: approx. 800 kg - Frame: welded steel frame - Table: swing-out - Lower table: adjustable height (3 positions) ==== Hydraulic Cylinder - Ram stroke: 150 mm - Piston rod diameter: Ø 80 mm - Cylinder diameter: Ø 100 mm - Max. working pressure: 250 bar ==== Hydraulics & Drive - Drive: manual via hand lever and hand pump - Precision pressure control: 0–1.5 t via cross handle - Hand pump: 0.5 l - Pressure display: manometer ==== Controls - Operation: manual via hand lever and cross handle - Pressure regulation: mechanically sensitive adjustment ==== Safety - Anti-twist device - Stable frame construction ##### Application areas: Pressing-in, pressing-out, assembly, disassembly, straightening, bearing technology, workshop operations, maintenance, fine assembly, service applications, small batch production Hydraulic press, hydraulic assembly press, disassembly press, workshop press, 15 t press, 15 ton press, manual hydraulic press, C-frame press, single-column press, C-press, hand press, pressing-in press, bearing press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German and European machinery guidelines (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they comply fully with the national Brazilian safety guideline NR 12, which builds upon these. Our core strength is in custom machine building and press automation. We provide bespoke hydraulic presses at surprisingly competitive prices. For the hydraulics of our presses, we mainly use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2022, stiskalna sila: 100 t, Single-column press – Manufacturer: Hidrobrasil – 100 t C-frame press – Table Ø 1,050 mm For sale is a powerful hydraulic single-column press (C-frame) from Hidrobrasil with a pressing force of 100 t. This machine is designed for industrial applications, providing optimal conditions for demanding forming, assembly, and production processes thanks to its high speed and robust construction. ==== Technical Specifications & Details: Hydraulic Single-Column Press – 100 t Fodpfohmi T Usx Ahmoph ==== General Information - Manufacturer: Hidrobrasil - Model: Single-column press / C-frame press - Design: C-frame press - Pressing force: 100 t - Machine weight: approx. 3,500 kg - Dimensions (W × D × H): approx. 1,354 × 2,005 × 2,595 mm ==== Working Area - Daylight opening: 350 mm - Stroke: 300 mm ==== Table & Ram - Table diameter: Ø 1,050 mm ==== Speeds - Feed speed: 250 mm/s - Pressing speed: 3 – 15 mm/s - Return speed: 150 mm/s ==== Hydraulics - Number of cylinders: 2 - Cylinder diameter: Ø 250.97 mm - Piston diameter: Ø 41.76 mm - Working pressure: max. 210 bar - Return force: 10 t - Auxiliary ejector force: 5 t - Auxiliary stroke: 150 mm ==== Hydraulic Power Unit - Pump capacity: 44.5 l/min - Pump/motor ratio: 27.59 cm³/rev - Motor output: 14.24 kW - Motor speed: 1,500 rpm - Oil tank volume: 350 l ===== Assembly operations, forming technology, series production, heavy-duty applications, toolmaking, industrial pressing processes Single-column press, C-frame press, hydraulic press, industrial press, production press, heavy-duty press, die spotting press, tryout press, tool tryout press Looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC norms, and EU safety standards. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which builds on these regulations. Our greatest strength is in special-purpose machine construction and press automation. We offer customized hydraulic presses at surprisingly affordable prices. For the hydraulic systems, we predominantly use components from leading European manufacturers.

Stanje: rabljeno, Leto izdelave: 2010, skupna širina: 2.080 mm, skupna višina: 1.900 mm, skupna dolžina: 2.440 mm, Barva: Siva Briketirni stroj; Höcker Polytechnik BrikStar C 3-19-L 4,3 kW, 400 V 25 kg/h Volumen lijaka: 3 m³ Oljni rezervoar: 50 l Dimenzije: 2015x2360x1300 mm, 830 kg - Leto izdelave: 2010 - Dokumentacija na voljo: Da - CE-certifikat: Ne Fodpfexqdxcjx Ahmsph - Prevozne dimenzije: 2440 mm x 2080 mm x 1900 mm (d x š x v) - Transportni paketi [kos]: 1 Finančne informacije DDV: Naveden cena je brez DDV DDV / Diferencirana obdavčitev: DDV je odbiten za podjetja Dostava in prevzem v račun možna kadarkoli za vse industrijske stroje Yorick Diebels

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vhodna napetost: 400 V, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional-grade machine designed for precise and demanding processing tasks. Thanks to its C-frame construction, it provides easy access to the working area, allowing for the handling and processing of larger workpieces and convenient material manipulation from various sides. Key Features - High pressing force – ideal for bending, straightening, press-fitting, and assembling components. - C-frame design – improved ergonomics and excellent access to the working area. - Robust steel frame – ensures longevity and safe operation. - Precise hydraulic control – stepless adjustment of force and working speed. - For industrial and workshop use – ideal for both large manufacturing operations and smaller workshops. Thanks to its versatility and rugged design, this press is suitable for many industries – from automotive and metalworking to technical service providers and tool workshops. Technical Data - Pressing force: 250 kN (approx. 25.5 t) - Maximum pressure: 25 MPa - Maximum opening: 500 mm - Stroke: 200 mm Fpedpsyr Ek Rofx Ahmoh - Table dimensions: 500 × 400 mm - Throat depth: 200 mm - Downstroke speed: 10 mm/s - Return speed: 14 mm/s - Motor power: 3 kW

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2026, stiskalna sila: 20 t, For sale is a C-frame assembly and small batch hydraulic press from DURENDUS with a maximum pressing force of 20 T. This machine features a table size of 700 × 920 mm, a maximum installation height of 550 mm, and a stroke of 400 mm, making it ideally suited for assembly work, small-batch production, pressing operations, and straightening processes in industrial applications. ##### Technical Data & Information: C-frame Assembly & Small Batch Press – 20 T – 700 × 920 mm ==== General Specifications - Design: C-frame / Single-column press - Manufacturer: DURENDUS - Pressing force: 5–20 T (adjustable) - Max. installation height: 550 mm - Table size: 700 × 920 mm - Press head: Ø 100 mm - Table height from floor: 1,000 mm - Overall dimensions (W×D×H): 900 × 900 × 2,340 mm - Total weight: approx. 1,200 kg - T-slots: DIN 650 – 22 mm or as per customer specifications - Forklift pockets: available - Press workspace lighting: available ==== Hydraulic Cylinder - Stroke: 0–400 mm (adjustable) - Cylinder diameter: Ø 110 mm - Piston rod diameter: Ø 65 mm - Max. working pressure: 280 bar - Return speed: 50 mm/s - Working speed: 10 mm/s - Idle speed: 10 mm/s - Pressure build-up time: max. 2 sec (steel on steel) ==== Hydraulics & Drive - Hydraulic pump: ASC - Delivery rate: 24 l/min - Motor power: 3 kW - Pressure accuracy: ±5 bar - Tank volume: 60 l - Valve technology: DUPLOMATIC - Filtration technology: FILTREC - Oil level monitoring: electronic - Cooling: oil-air cooling - Hydraulic unit: mounted at the rear top ==== Controls - Operation: foot pedal or hand lever - Pressure setting: rotary knob - Travel limit: adjustable sensors - Selector switch: foot/hand operation - Control cabinet components: primarily SIEMENS ==== Safety - Emergency stop switch - Travel limit - Robust steel frame construction - CE-compliant execution ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC Fpjdpfx Ajy Sx Uwehmjh - Frequency: 50 Hz - Main motor power supply: 3 kW - Total connected load: max. 5 kW ##### Areas of application: assembly works, small-batch production, pressing, straightening, toolmaking, fixture construction, metalworking, maintenance, workshop operations, and service assignments. (Hydraulic press, hydraulic C-frame press, single-column press, assembly press, small-batch press, workshop press, 20 T press, 20 ton press, insertion press, straightening press, industrial press, C-frame press) Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured in accordance with German Machinery Directives, as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements by fully complying with all aspects of the national Brazilian safety regulation NR 12, which builds upon these standards. Our core strengths are special machine construction and press automation. We offer customized hydraulic presses at surprisingly competitive prices. The hydraulic systems of our presses primarily use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: PRASA HYDRAULICZNA TYPU C HPW 50 50 TON, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, stiskalna sila: 51 t, hod: 200 mm, širina mize: 400 mm, dolžina mize: 500 mm, hitrost stiskanja: 18 mm/s, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Its C-frame design provides easy access to the working area, allowing the processing of larger workpieces and convenient material handling from different sides. Key Features - High pressing force – ideal for bending, straightening, pressing in, and assembling components. - C-frame construction – enhanced ergonomics and excellent access to the work area. - Robust steel frame – ensures durability and safe operation. - Precise hydraulic control – stepless adjustment of force and working speed. - Suitable for industrial and workshop use – ideal for both large-scale production and smaller workshops. Fpjdoyr D R Nopfx Ahmsh With its versatility and robust design, this press is suitable for many industries – from the automotive sector and metalworking to technical service providers and tool workshops. Technical Data - Pressing force: 500 kN (approx. 51 t) - Maximum pressure: 25 MPa - Maximum opening: 500 mm - Stroke: 200 mm - Table dimensions: 500 × 400 mm - Throat depth: 200 mm - Downstroke speed: 19 mm/s - Return speed: 18 mm/s - Motor power: 4 kW Delivery to the customer is possible. Shipping costs are calculated individually according to the carrier’s offer. If you are interested in further machines, please visit our website.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vhodna napetost: 400 V, Hydraulic C-frame press Our hydraulic C-frame press is a professional-grade machine designed for precise and demanding processing tasks. Thanks to its C-frame construction, it offers easy access to the working area, making it possible to handle larger workpieces and conveniently operate materials from different sides. Main features - High pressing force – ideal for bending, straightening, pressing-in, and assembling components. - C-frame design – improved ergonomics and excellent access to the work area. - Robust steel frame – ensures durability and safe operation. - Precise hydraulic control – stepless adjustment of force and working speed. - Industrial and workshop use – suitable for both large manufacturing facilities and smaller workshops. Fpjdpfx Ahsyrr Rksmeh Thanks to its versatility and robust construction, this press is suitable for many industries – from automotive and metalworking to technical service companies and tool workshops. Technical specifications - Pressing force: 1000 kN (approx. 102 t) - Maximum pressure: 25 MPa - Maximum opening: 600 mm - Stroke: 300 mm - Table dimensions: 700 × 500 mm - Throat depth: 250 mm - Approach speed: 11 mm/s - Return speed: 25 mm/s - Motor power: 5.5 kW Delivery to customer possible. Transport costs are calculated individually by the carrier.

Stanje: novo, Pressure: 100 Motor: 15 Mounting height: 500 Max. stroke length: 400 Table size: 800 x 600 Ram area: 800 x 600 Table height: 850 Dimensions (LxWxH): 1,300 x 2,000 x 2,750 Approx. weight: 5,500 Oil capacity: 200 Control / Key switch: 1. Set-up mode Manual without light sensor (max. 10mm/sec speed) 2. Automatic (with full speed) with light sensor Main cylinder: Ø 230mm Fpsdpfx Ajm Nntyohmsh Auxiliary cylinders: 2 pcs Ø 50 x 30mm Auxiliary guides: 2 pcs Ø 50mm Motor: 11 kW – 15 hp (IE-3) Pump: 23 liters / ASC Speed: Advance 110mm/sec – Return 200mm/sec – Pressure: 9mm/sec Mounting height: 500mm Stroke length: 400mm Table plate: 800 x 600 (with T-slots) (custom designs possible) Ram plate: 800 x 600 (with T-slots) Table height: 850mm (floor to top edge of table plate) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure setting via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Swiveling operator panel Safety PLC – SICK Light sensors SICK 700 + 150mm Linear scale for setting stroke length 9” PLC display – Siemens (German & English) Mobile two-hand operation Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) 2x workstation lighting 8 free inputs & outputs on the PLC for external connections The press complies with Machinery Directive Hydraulic proportional valves Dual-channel cable safety Operating manual & parts list (German) With side safety door (doors slide to the rear)

Stanje: novo, Pressure: 100Motor: 11Installation Height: 500Max. Stroke Length: 400Ram Adjustment: 790 x 600Table Height: Floor to Top of Table - 850Dimensions (LxWxH): 1,300 x 2,000 x 2,750 mmWeight approx.: 5,500Oil Fill: 200Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 bar Control / Key Switch Modes: Setup Mode – Manual, without light curtain Automatic Mode – Full speed with light curtain Hydraulic System: Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 units, Ø 50 x 30 mm Auxiliary Guides: 2 units, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc – 23 l/min, helical gear pump Speeds: Advance: 110 mm/sec Return: 200 mm/sec Pressure Phase: 9 mm/sec Machine Dimensions: Installation height: 500 mm Stroke length: 400 mm Fjdpowrkctjfx Ahmsph Ram plate: 790 x 600 mm (with T-slots) Table plate: 790 x 600 mm (with T-slots) Table height: 850 mm (from floor to top of table) Hydraulic Accessories: Hydraulic control block & components by REXROTH Pressure setting via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Pre-fill valve Pressure holding valve Control Accessories: Siemens S7-1200 control system Main control cabinet Safety PLC by SICK Safety light curtains by SICK (700 mm) Linear scale for stroke adjustment 10" BEIJER touchscreen (German & English) Movable two-hand control Ethernet interface for remote maintenance Fault indicator with light and audible alarm Dual workspace lighting Side safety doors (can be swung out) Hydraulic proportional valves Dual-channel safety control Operating manual & parts list (German) Complies with current machinery directive EN 693 Oil quantity: 220 liters (tank volume: 250 liters) Total weight: approx. 5,500 kg Dimensions: 1,300 x 2,000 x 2,750 mm Paint finish: RAL 7035 light grey & RAL 7016 anthracite grey

Stanje: rabljeno, Leto izdelave: 1978, številka stroja/vozila: 4788, Skupna pritiskalna sila: 35 t Izvlaka: 225 mm Hod bata: 8 - 80 mm Nastavitev bata: 50 mm Montažna višina (hod spodaj, nastavitev zgoraj): 325 mm Fjdpfx Ahew Tukijmsph Pritrdilna površina mize pribl.: 600 x 450 mm Pritrdilna površina bata pribl.: 300 x 225 mm Število hodov na minuto: 160 min-1 Potreba po moči: 2,2 kW Dimenzije DxŠxV: 1000 x 1600 x 2200 mm Teža stroja pribl.: 1,9 t

Stanje: rabljeno, Leto izdelave: 1972, številka stroja/vozila: 1171, Total pressing force: 160 t Throat depth: 350 mm Ram stroke: 20 - 140 mm Ram adjustment: 75 mm Installation height (stroke down, adjustment up): 740 mm Table clamping surface approx.: 1000 x 680 mm Ram clamping surface approx.: 600 x 300 mm Strokes per minute: 50 min⁻¹ Power requirement: 15 kW Machine weight approx.: 12 t Standard equipment: Machine includes: - Guard HS Decoiler M 15 / 500 - Year of manufacture 2009 Material width: 15 - 500 mm Coil weight: 1.5 t Coil outside diameter: 1400 mm Coil inside diameter: 380 - 530 mm HS Straightening Machine RME 40 - 9 - Year of manufacture 2009 Material thickness: 0.4 - 2 mm Number of feed rollers: 2 pcs Number of straightening rollers: 9 pcs Straightening roller diameter: 61.9 mm Feed roller diameter: 61.9 mm Feed speed: 40 m/min Feed length: 0 - 9999.99 mm Fjdpfouqdwxsx Ahmjph Additional equipment: The machine was retrofitted with SIEMENS S7 control in 2009.

Stanje: rabljeno, Pressing force: 50 t Throat depth: 265 mm Stroke: 250 mm Installation height: 400 mm Fodpfx Aswyplcehmjph Table clamping surface approx.: 700 x 450 mm Ram clamping surface approx.: 550 x 300 mm Table height above floor: 850 mm Rapid approach speed: 32 mm/s Working speed: 6.3 mm/s Rapid return speed: 42 mm/s Power requirement: 4 kW Dimensions LxWxH: 1290 x 1160 x 2085 mm Machine weight approx.: 1.75 t Standard equipment: Siemens S7-1200 control system, working mode, inching mode, foot switch, mechanically adjustable stop, light barriers Automation: Optionally available with HORST robot.

Stanje: rabljeno, Leto izdelave: 1971, številka stroja/vozila: 7130, Total pressing force: 60 t Throat depth: 275 mm Ram stroke: 5 - 100 mm Installation height (stroke down, adjustment up): 375 mm Table clamping surface approx.: 740 x 470 mm Strokes per minute: 14 - 100 min⁻¹ Fpjdpfx Asuqcxnshmjh Power requirement: 10 kW Dimensions (LxWxH): 2,300 x 1,500 x 3,000 mm Machine weight approx.: 3.5 t

Stanje: rabljeno, Leto izdelave: 1970, Press force: 30 t Throat depth: 160 mm Adjustable ram stroke: 20 - 45 mm Ram adjustment: 10 / 60 mm Shut height (stroke bottom, adjustment top): 220 mm Table clamping area approx.: 470 x 300 mm Ram clamping area approx.: 250 x 190 mm Strokes per minute: 80 - 240 min⁻¹ Power requirement: 4 kW Dimensions LxWxH: 1,400 x 1,800 x 2,000 mm Machine weight approx.: 2.67 t Fjdeuqc Enjpfx Ahmsph Standard equipment: The machine's electrical system was modernized in 2015.

Stanje: rabljeno, Leto izdelave: 1983, številka stroja/vozila: 5154, Total pressing force: 25 t Throat depth: 250 mm Ram stroke: 6 - 60 mm Ram adjustment: 50 mm Installation height (stroke down, adjustment up): 190 mm Clamping plate thickness: 50 mm Fpsdpeuqc Hfjfx Ahmeh Table clamping surface approx.: 500 x 400 mm Ram clamping surface approx.: 350 x 250 mm Ram bore (clamping pin hole): 40 H7 mm Strokes per minute: 160 min⁻¹ Dimensions (LxWxH): 1,300 x 1,500 x 1,995 mm Machine weight approx.: 2 t Additional features Tiltable press frame

Stanje: novo, Pressing Force: 150 t Motor: 15 kW Installation Height: 500 mm Max. Stroke Length: 400 mm Table Size: 900 x 600 mm Ram Area: 900 x 600 mm Table Height: 850 mm Dimensions (LxWxH): approx. 1300 + (300 control cabinet) x 2000 x 3200 mm Weight approx.: 8,000 kg Oil Filling: 400 l Hydraulic C-Frame Press General Information: Design: C-frame, hydraulic Pressing Force: 150 t at 240 bar Return Force: 30 t at 150 bar Voltage: 400 V / 50 Hz Standards: Machinery Directive EN 693 Paintwork: RAL 7035 – Light Grey Warranty: 12 months Dimensions (WxDxH): approx. 1300 + 300 mm control cabinet x 2000 x 3200 mm Total Weight: approx. 8,000 kg Control System: Mode 1: Setup mode without light sensor Mode 2: Automatic mode (single stroke) with light sensor PLC Control: Siemens S7–1200 Safety PLC: SICK Swiveling operator panel with soft starter Two-hand control (mobile) Light sensors: SICK 700 + 130 mm Stroke Measurement System: Ruler scale (500 mm) Touchscreen: 9" Siemens, memory for up to 500 tool sets Remote maintenance: Secomea module 8 free I/O ports for external connections (e.g., robot, coil line) Work area lighting (double) Hydraulic System: Main Cylinder: Ø 270 mm Auxiliary Cylinders: 2 x Ø 70 x 40 mm Auxiliary Guides: 4 x Ø 50 mm Motor: 15 kW / 22 HP (IE3) Auxiliary Motor: 2.2 kW / 3 HP Pump: 45 cc, 65 l/min – REXROTH Auxiliary Pump: present Tank Volume: 500 l Oil Volume: 400 l Air cooler for oil tank Hydraulic accessories: REXROTH hydraulic block & valves, pre-fill valve, hydraulic & mechanical ram lock (top dead center) Pressure & speed adjustable via PLC Mechanical Data: Installation height: 500 mm (distance ram – table top) Stroke length: 400 mm Die depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to table top) Plate dimensions: Table plate: 900 x 600 x 120 mm (with T-slots, customer-specific) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Speeds (adjustable via PLC): Approach: 120 mm/s Return: 140 mm/s Pressing phase: 13 – 5 mm/s Fodewzzzfjpfx Ahmoph Control & Electronics: Main control cabinet Pressure & speed adjustment via PLC Swiveling operator panel Mobile two-hand control Light sensors SICK Stroke measurement system Display: 9" Siemens touchscreen Remote maintenance via Secomea module Safety & Operation: Hydraulic proportional valves Dual-channel safety system Lateral safety doors (sliding to the rear) Operating instructions & parts list (German), including maintenance plan

Stanje: novo, Leto izdelave: 2025, moč: 5,5 kW (7,48 KM), stiskalna sila: 80 t, širina mize: 660 mm, dolžina mize: 860 mm, prebijalna sila: 80 t, prebojna odprtina v mizi: 180 mm, nastavitev hoda: 110 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric presses are a type of mechanical press driven by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to their high production speed and repeatability, they offer an efficient and reliable solution for serial production lines. CRONOSSTECH C-Type Eccentric Press 80 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for mass production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-oriented design (light curtain + safety systems) - Low maintenance requirement with central automatic lubrication - Production-ready operation with PLC control + dual hand/foot control Areas of Use - Cold cutting and punching operations - Cold breaking applications - Metal forming with dies - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided guideways • Spheroidal graphite cast iron connecting rod and gear housings • Crankshaft and drive shafts made of 4140 quenched and tempered steel • Central fully automatic grease lubrication • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger and hand protection system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Occupational safety regulation compliant • CE standard compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One die set manufactured to requested specifications • 8-point slide guidance ✅ TECHNICAL SPECIFICATIONS (80 TON) Capacity: 80 Tons Throat depth: 280 mm Bed–ram distance: 400 mm Slide–bed distance: 420 mm Distance between uprights: 400 mm Ram adjustment: 85 mm Approximate width: 1400 mm Approximate depth: 1735 mm Fodpovtx H Rofx Ahmsph Approximate height: 2220 mm Front anchorage size: 670 mm Side anchorage size: 1040 mm Bolster hole diameter: Ø190 mm Bolster dimensions: 540×740 mm Die fixing hole diameter: Ø40 mm Ram size: 370×230 mm Bed height from floor: 755 mm Stroke adjustment: 10–100 mm Strokes per minute: 45–75 spm Motor power: 7.5 kW Motor speed: 1450 rpm Approximate weight: 4000 kg Note: Should you require changes to technical specifications, please contact us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, moč: 22 kW (29,91 KM), stiskalna sila: 250 t, hod: 160 mm, širina mize: 700 mm, dolžina mize: 1.100 mm, globina grla: 350 mm, nastavitev hoda: 150 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, The eccentric press is a type of mechanical press operated by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 250 Ton is designed for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure make it a reliable performer suitable for serial production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready with PLC control and dual-hand/foot operation Applications - Cold cutting and punching operations - Cold breaking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES - Steel construction body - Four-sided guided slide - Nodular cast iron connecting rod and gear housings - Crankshaft and transmission shafts made of 4140 tempered steel - Centralized fully-automatic grease lubrication - Pneumatic clutch and brake combination Fpsdpfx Ajx N Nfbjhmsh - Compliance with CE safety directives - Double-coil safety valve - Manually adjustable stroke - Finger-hand protection safety system with light curtain - PLC control system - Dual-hand/foot control system - Mechanical safety system - Emergency reverse motor operation - Complies with occupational health and safety regulations - Conforms to CE standards ✅ OPTIONAL FEATURES - Vibration isolation mounts - Touch LCD screen (standard for 150–300 ton models) - Hydraulic safety system (standard for 200–300 ton models) - Spare bolster plate - Coil feeder, straightener, and uncoiler - One set of dies according to requested specifications - Eight-way guided slide ✅ TECHNICAL SPECIFICATIONS (250 TON) - Capacity: 250 tons - Throat depth: 350 mm - Table–ram distance: 520 mm - Slide–table distance: 630 mm - Distance between side frames: 520 mm - Ram adjustment (regulation): 150 mm - Approx. press width: 2000 mm - Approx. press depth: 2500 mm - Approx. press height: 3100 mm - Front anchoring dimension: 930 mm - Side anchoring dimension: 1430 mm - Table hole diameter: Ø250 mm - Table size: 700×1100 mm - Die clamping slot diameter: Ø60 mm - Ram size: 670×380 mm - Table height from floor: 810 mm - Stroke adjustment: 20–160 mm - Strokes per minute: 40 spm - Motor power: 22 + 2.2 kW - Motor speed: 1450 rpm - Approximate weight: 12,000 kg Note: Please inform us if you require modifications in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, moč: 30 kW (40,79 KM), stiskalna sila: 300 t, hod: 200 mm, širina mize: 700 mm, dolžina mize: 1.200 mm, globina grla: 370 mm, nastavitev hoda: 150 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, Eccentric presses are mechanical press types operated by an eccentric mechanism, used for cold forming operations such as punching, cutting, and forming with dies. Thanks to their high production speed and repeatability, they offer an efficient and reliable solution for serial production lines. CRONOSSTECH C-Type Eccentric Press 300 Ton is designed for stable operation in cold forming applications. Its rigid steel construction frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production. Key Advantages Fpedpfx Aex N Nfhjhmeh - Stable stroke performance and high repeatability in mass production - Operator safety-oriented design (light curtain + safety systems) - Low maintenance requirement thanks to central automatic lubrication - Ready-to-use with PLC control and dual-hand/foot pedal operation Areas of Application - Cold cutting and punching operations - Cold breaking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction body • 4-way guide slide • Spheroidal cast connecting rod and gear housings • Crankshaft and transmission shafts made of 4140 tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • Designed according to CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger and hand protection system • PLC control system • Dual-hand/foot pedal operation system • Mechanical safety system • Emergency motor reverse feature • Complies with occupational safety regulations • CE compliance ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touch-screen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • One set of die according to requirements • 8-way slide system ✅ TECHNICAL SPECIFICATIONS (300 TON) Capacity: 300 Ton Throat depth: 370 mm Bed–ram distance: 530 mm Ram–table distance: 650 mm Distance between side frames: 470 mm Ram adjustment (shut height adj.): 150 mm Approximate press width: 2000 mm Approximate press depth: 2700 mm Approximate press height: 3200 mm Front anchor dimension: 940 mm Side anchor dimension: 1440 mm Table hole diameter: Ø260 mm Table size: 700×1200 mm Die clamping slot diameter: Ø60 mm Ram size: 780×400 mm Floor-to-table height: 810 mm Stroke adjustment: 20–200 mm Strokes per minute: 38 spm Motor power: 30 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 13,200 kg Note: Please inform us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, moč: 15 kW (20,39 KM), stiskalna sila: 200 t, širina mize: 800 mm, dolžina mize: 1.100 mm, prebijalna sila: 200 t, prebojna odprtina v mizi: 220 mm, vrtina cilindra: 60 mm, nastavitev hoda: 180 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press driven by a force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. With its high production speed and repeatability, it offers an efficient and reliable solution for serial production lines. CRONOSSTECH C-Type Eccentric Press 200 Ton is designed for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver reliable performance suitable for mass production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with central automatic lubrication Fpjdpfsvtyx Isx Ahmoh - Production-ready use with PLC control and dual hand/foot controls Applications - Cold cutting and punching operations - Cold shearing applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-surface slide guides • Spheroidal graphite cast iron connecting rod and gear bearings • Crankshaft and transmission shafts made of 4140 quenched and tempered steel • Central, fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Double-solenoid safety valve • Manually adjustable stroke • Light curtain hand–finger safety system • PLC control system • Dual hand/foot control system • Mechanical safety lock • Emergency reverse motor movement • Compliant with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare table • Decoiler, feeder, and straightener • One set of tooling/custom die as requested • Eight-point slide guidance ✅ TECHNICAL SPECIFICATIONS (200 TON) Capacity: 200 Ton Throat depth: 340 mm Bed–ram distance: 500 mm Slide–bed distance: 600 mm Distance between uprights: 510 mm Ram adjustment (shut height): 130 mm Approx. press width: 1900 mm Approx. press depth: 2400 mm Approx. press height: 3000 mm Front anchor distance: 920 mm Side anchor distance: 1420 mm Table hole diameter: Ø240 mm Table size: 680×1000 mm Die clamping slot diameter: Ø60 mm Ram size: 620×350 mm Floor to bed height: 805 mm Stroke adjustment: 20–140 mm Strokes per minute: 50 spm Motor power: 18.5 + 0.75 kW Motor speed: 1450 rpm Approx. weight: 9200 kg Note: If you require any changes to the technical specifications, please let us know. ✅ MANUFACTURING / SUPPLY NOTE: This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.