Električna stiskalnica, servo stiskalnica, stiskalnica v obliki črke C

TOX CMB008.407.A.001

Stanje: pripravljen za uporabo (rabljen), An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Wafios RB20 bending head, bending direction: left and right, max. total tool height: 78 mm, bending capacity: 360 Nm, bending speed: 560°/s, bending radius: 57 mm, repeatability for bending, rotation and feed: +/-0.05 mm. 2) Kuka KR 16-2 KRC 2 robot, axes: 6, payload: 16 kg, max. reach: 1611 mm, repeatability: +/-0.05 mm, weight: approx. 235 kg. Includes overhead magazine, Kuka control cabinet, discharge conveyor, safety fence, mobile operator panel, docking station and work table. Documentation available. On-site inspection possible. Bodpfx Aiswwlkioyjdi

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 181199, Machine No.: 181199 Manufacturer: AGTOS Type: Drum Shot Blasting Machine Designation: TS 150-3.6-01-15.0 Turbines: 1 turbine with 15.0 kW Extraction air volume: 3000 m³/h Max. batch weight: approx. 1000 kg Type: Sinter plate filter Other Details Characteristics of the installed filter system Residual dust content: ≤ 1 mg/Nm³ Characteristics of the blasting machine Blasting media (material and size): Wire shot Blasting media amount (initial fill): approx. 1000 kg Bdedjrq Hmzspfx Aiysi Workpiece temperature: max. 80°C Drum length: 900 mm Drum diameter: 800 mm Max. drum load: 250 kg Max. single piece weight: 5 kg Capacity: 150 liters Max. lifting capacity of loader: 480 kg Sound pressure level without noise protection: ≤ 85 dB(A)

Leto izdelave: 1981, stanje: rabljeno, Pressure: 63 t Stroke: 6–60 mm Strokes per minute: 90–550 spm Installation height (table bottom to ram adjustment top): 300 mm Table area: 780 x 600 mm Ram area: 807 x 460 mm Ram pin hole diameter: 40 mm Ram adjustment: 80 mm Total power requirement: 15 kW Machine weight approx.: 8 t Bjdpjlp U R Isfx Aiyodi Space requirement (WxDxH): approx. 2900 x 2000 x 3000 mm Oil central lubrication IMCO press force measuring device

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 Bdedsuhaxfjpfx Aiyji - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turret heads: 2 UPPER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 [mm] - Y-axis travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 - X/Z-axis travel: 35/79.5 [mm] FRONT UNIT - Number of positions: 4 - Number of driven positions: 4 - Driven tools speed: 10,000 [rpm] - X/Z-axis travel: 415/138.5 [mm] SUBSEQUENT MACHINING - Number of positions: 4 - Number of driven positions: 4 - Driven tools speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES - CNC control: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: LNS TRYTON HYBRID

Stanje: dober (rabljeno), Leto izdelave: 1999, Pneumatic press, manufacturer SCHMIDT, model ZHS-2/22, year 1999. Equipped with two-hand operation. Bsdpfx Aijiduvcoyedi Safety inspection (UVV) valid until 2023.

Leto izdelave: 2023, stanje: rabljeno, Sheet width: 300 mm Coil weight: 1 t Coil inner diameter: 375–550 mm Coil outer diameter: 1600 mm Machine weight: approx. 0.5 t Space requirement: approx. 1500 x 1500 x 1900 mm Bsdpelp U Tbofx Aiyedi Hydraulic expansion Loop control 6x limit arms Safety device Machine number: 35223

Stanje: rabljeno, Leto izdelave: 1992, številka stroja/vozila: 120 4687, Press force: 80 t Adjustable ram stroke: 4 - 60 mm Ram adjustment: 0 - 80 mm Bdsdjuqc I Aspfx Aiysi Shut height (stroke down, adjustment up): 310 mm Distance between uprights (L-R): 800 mm Table height above floor: 1150 mm Table clamping area approx.: 780 x 640 mm Ram clamping area approx.: 800 x 460 mm Die opening in table: 690 x 170 mm Strokes per minute: 30 - 300 min-1 Power requirement: 21 kW Height above floor approx.: 2900 mm Machine weight approx.: 12 t Control: Siemens S5 Standard equipment: Roll feeder Type WAV - RDS 2E 1125 Max. strip width: 310 mm Strip thickness: 0.3 - 3 mm Cross-section of strip: 630 mm² Feed speed: 80 m/min Roll diameter: 125 mm

Stanje: dober (rabljeno), Bobnasti stroj za peskanje z gumastim trakom Maks. volumen serije: 140 L Maks. teža serije: 300 kg Maks. teža komponente: 10 kg Premer prekata: 700 mm Širina prekata: 850 mm Št. turbin: 1 Moč turbine: 4 kW Bsdpezbrftsfx Aiyjdi Maks. pretok turbine: 56 kg/min Tip čiščenja: zrak Temelji: ne Zaščita ohišja: Mn + guma Filter enota: DA Maks. instalirana moč: pribl. 12 kW !!! NAMEŠČEN NOV gumijasti trak !!!

Leto izdelave: 1994, stanje: rabljeno, Bandwidth: 20–80 mm Material thickness: 0.3–1.5 mm Speed: 0–40 meters/min Working direction: left to right Straightening rollers: 20 pieces, diameter 30 mm Decoiler load capacity: 300 kg Expansion range: 200–540 Outer diameter: 1000 mm Braking: pneumatic Bdodpfxedc Ez He Aiysi

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, INJECTION MOULDING MACHINE Arburg ALLROUNDER 1300 T 1000 – 170 Year of manufacture: 2023 Technical specifications Clamping unit: - Clamping force: 1,000 kN – ensures high process stability - Rotary table diameter: 1,300 mm – optimizes the production cycle - Usable mould mounting surface: 800 × 590 mm - Minimum mould height: 300 mm - Maximum daylight between platens: 585 mm Injection unit (3 exchangeable cylinders): - Cylinder Ø 30 mm: 83 cm³ at 2,200 bar - Cylinder Ø 40 mm: 140 cm³ at 1,250 bar - Cylinder Ø 20 mm: 36 cm³ at 2,500 bar Additional equipment: - 2 hydraulic core pulls – for handling complex mould designs - 2 pneumatic valves – for additional mould functions - GK control – possible to operate 3 heating zones directly from the machine - SELOGICA DIRECT control system – precise process control, custom sequence programming possible Year of manufacture: 08/2023 Pump operating hours: 1,062 h Detailed description The machine is equipped with a hydraulic system featuring two energy-saving variable delivery pumps and a servo valve, ensuring precise control of pressure and movements. The hydraulic unit is mounted outside the injection moulding machine’s frame, significantly reducing operational noise levels. Thanks to highly efficient filters and low oil volume, the oil change interval has been extended to 20,000 hours. T2 technology with servo control includes: - two variable delivery pumps - programmable, adjustable, and stabilized clamping force - programmable and manually adjustable nozzle contact force Bdjdpsxzklqsfx Aiyei - capability for parallel movements (nozzle, ejector, core pulls) The machine also features: - Additional continuous oil filtration and cooling system (bypass circuit) - AES system – automatic optimization of the main drive operation, reducing energy consumption by smoothly adjusting the pump speed according to machine load (for motors 15–75 kW, 380–480V, 50–60 Hz) Required option: 525/02 – adjustable machine cooling circuits The platen plates are equipped with a central injection position and a centering hole Ø 125 mm.