Stroj za navijanje/ravnanje

Kohler 30.80/20-300-1

Stanje: dober (rabljeno), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Steady arm throat (horizontal): 670 mm Steady arm throat (vertical): 940 mm Ram stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Redpekvnumsfx Agtet Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Leto izdelave: 1986, stanje: dober (rabljeno), Technische Daten: Rodpfod H Ur Aex Agtst Produkte – - Flachstahl: 10x3 – 25x3 mm, 10x4 – 25x4 mm, 12x5 – 20x5 mm - Vierkantstahl: 6x6 – 12x12 mm - T-Profil: 20x10x3 mm - L-Profil: 15x15x3 – 18x18x3 mm Rohmaterial Draht: 8, 9, 10, 11, 12, 13, 14, 16 mm Transformatorleistung: 20 kW Geschwindigkeit: 35 m/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 144 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 694355, skupna masa: 235 kg, nosilnost: 16 kg, doseg roke: 1.610 mm, This is a KUKA KR 16-2 R1610 industrial robot, year of manufacture 2017. We are also pleased to offer you this robot as a fully refurbished unit upon request! The robot comes with the following options: - Board Package Rodpot N Szpjfx Agtot - EthernetKRL - Load Data Determination - Profinet KRC-Nexxt - Remote Service - Safe Operation - UserTech

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 001669, Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Decoiler with auxiliary drive and brake Fixed coil loading saddle + decoiler traversing device Included: High-Performance Precision Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine No.: 001669 Maximum pass-through width: 620 mm Number of straightening rolls: 9 Straightening roll diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rolls are multi-point supported against deflection All rolls driven via distribution gearbox and cardan shafts. Rjdpfxjhigmbe Agtet Used, as-is ex stock, immediately available. Overhaul available on request. Delivery time by arrangement. Further data available shortly or on request.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, številka stroja/vozila: 06 61 218, Ref. No.: Lg 32821 Single-Sided Decoiler BBT ABH 2000/400 Exhibition machine, unused Machine No.: 06 62 218 Year of manufacture: 2021 Technical Data Rjdpfx Asg U Utvogtet Load capacity approx.: max. 2,000 kg Strip width: max. 400 mm Inner coil diameter: approx. 450 to 520 mm Outer coil diameter: max. 1,500 mm Unwinding speed: approx. 2 to 15 rpm Equipped with adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase gear motor. Expansion of carrying segments manually via hand crank and joints Number of carrying segments: 3 Coil lateral guidance achieved by robust, lockable boundary arms. Decoiler stand constructed in heavy-duty box design, fabricated as welded assembly. Additional Equipment: Shutdown for "loop too small" via antenna switch, mounted on the column of the base housing of the loop control. Height infinitely adjustable. Strip side guide on the base housing of the loop control, via lateral guide rods. Pass-through width infinitely adjustable.

Stanje: rabljeno, Eccentric Pressing Machine HAULICK + ROOS Type RVD 125 Double-column Eccentric Press Machine No. 212560 Year of manufacture: 1981 Pressing force: 125 tons Table size: 880 x 800 mm Table opening: 470 x 140 mm Column width: 900 mm Column width (lateral): 415 mm Ram stroke: 45 mm Ram adjustment: 0-80 mm Die height as pictured: 340 mm Strokes per minute: 50 to 300 spm Main drive motor power: 22 kW Power supply: 380 Volt, 50 Hz - Double-connecting rod mechanism with 4-point eccentric shaft bearing for off-center ram pressure loads Rsdpfxehlnzks Agtjt - Separate electrical control cabinet - NC roller feeder EBU, width 250 mm, year of manufacture: 2003 - Separate operating console for roller feeder - Coil feed direction: left to right Space requirement (press) L x W x H: 3000 x 2000 x 3020 mm Transport height: 2950 mm Weight of press: approx. 11 tons

Leto izdelave: 1987, stanje: rabljeno, Sheet width 150 mm Coil weight 80 kg Coil outside diameter 650 mm Mandrel height 1000 mm Redpfefn Aqlex Agtjt Expansion range 230 - 445 mm Total power requirement kW Machine weight approx. t Space requirement approx. m motorized decoiler

Stanje: rabljeno, Leto izdelave: 1970, številka stroja/vozila: 120895, Pressing force: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 s.p.m. Table: 715 x 500 mm Redpfx Ajfx Hv Hegtjt Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Pass-through opening in the table: 240 mm Pass-through opening in the clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Required floor space approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press in tiltable design, via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or downward (360 x 160 mm), with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot release can be configured, operation mode selector for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Stanje: zelo dobro (rabljeno), KUKA Model: KUKA KR 16 R2010 / Control Unit KR C4 / KUKA smartPAD KUKA KR 16 R2010 – Industrial Robot Technical Data: Payload: 16 kg Reach: 2010 mm Repeatability: ±0.05 mm Axes: 6 Mounting Options: Floor, ceiling, wall, or inclined installation possible Controller: KUKA KR C4 (Standard) Typical Applications: - Handling & assembly Rsdpjwb Ef Uofx Agtot - Arc welding - Machine tending - Packaging & palletizing - Pick-and-place tasks Special Features: - Flexible use in many industrial areas - High precision and reliability - Compact design with large reach Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) If you have any further questions, we will be happy to answer them by phone.

Stanje: rabljeno, For further technical data, please contact the seller. Rjdpfx Aeh A I S Aegtst