Ravnalna stiskalnica

Hidrobrasil Portalrichtpresse

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: -, stiskalna sila: 40 t, This press is based on an already proven and tested design and can be newly manufactured at short notice and specifically tailored to your application. Inspection of the existing machine at the customer's site is possible upon prior arrangement. The press is suitable for straightening work, assembly operations, as well as pressing-in and pressing-out processes. ### Technical Data – Frame *Pressing force: 40 t *Usable table area: 635 × 555 × 70 mm *Distance between columns: 900 mm *Opening (ram – table, max.): 500 mm *Distance table to floor: 1,200 mm *Overall dimensions (W × D × H): 1,880 × 900 × 2,300 mm *Total weight: approx. 1,500 kg *Frame: Welded steel frame * * * ### Hydraulics – Cylinder *Piston stroke: 550 mm *Piston rod diameter: Ø 90 mm *Cylinder diameter: Ø 150 mm *Max. operating pressure: 280 bar * * * ### Hydraulics – Power Unit *Pump: ASC *Delivery rate: 12 l *Motor power: 4 kW *Return speed: 16 mm/s *Idle speed: 10 mm/s Gjdpfsyia D Rex Agweip *Oil tank volume: 120 l *Hydraulic block / valves: Hydropack *Pressure gauge: Manometer *Pressure adjustment: Adjustable *Pressure switch: Present *Power unit: Side-mounted on the press * * * ### Operation * Manual operation via adjustable hand lever valve * Sensitive speed control via lever position * Pressure adjustment via rotary control * * * ### Electrical Data *Main supply: 400 V AC *Control voltage: 24 V DC *Frequency: 50 Hz *Hydraulic main motor connection: 4 kW *Total connected load: approx. 5 kW * * * ### Control Cabinet / Electrical Equipment *Protection class: IP 54 *Spare capacity: approx. 30% *Cooling: No *Internal lighting: No *Operating mode selector switch: Yes, lockable *Electrical components: Siemens, Allen-Bradley, Sick * * * ### Paint Finish *Frame / Main body: RAL 7035 (Light Grey) *Aggregates & moving parts: RAL 7016 (Anthracite Grey) *Painting: 2-coat finish (primer + topcoat) *Special colours: RAL colours freely selectable by arrangement * * * ### Documentation & Standards *Documentation: German and English *Documentation included: * CE documentation * Spare parts lists * E-plans and E-BOM (digital) Guidelines & standards: * 2006/42/EC Machinery Directive * 2014/35/EU Low Voltage Directive * 2014/30/EU EMC Directive * EN ISO 16092-1 / -3 * EN 60204-1 * EN ISO 12100 * EN ISO 4413 * * * ### Note The cut-out in the table was originally implemented at the express request of the customer. Alternatively, the press can be supplied with a solid steel plate or with a T-slotted plate. The table design can be individually adapted to the application. The ram features an integrated tool holder. Various press heads with a diameter of up to 250 mm can be mounted via this interface. This allows the press to be flexibly adapted to changing tools and production processes. We would be happy to advise you on a version precisely tailored to your production and application requirements. Hydraulic workshop press, 40-t press, Durendus press, new hydraulic press, workshop press with table, assembly press, straightening press, pressing-in press, industrial workshop press, CE-compliant press, hydraulic press 400 V

Leto izdelave: 2024, stanje: novo, Make: DURMA Model: MS 2504 Year of manufacture: 2022 Goded R Er Djpfx Agwsip Cutting length: 2550 mm Sheet thickness: 4 mm Control system: EZM9910 Operating hours: 0 Cutting angle: 1°30' Strokes per min.: 42 Motor power: 7.5 kW Backgauge range: 750 mm Table width: 450 mm Table height: 800 mm Dimensions (LxWxH): 3200x2300x1350 mm Weight: 3780 kg Standard equipment: - EZM9910 control unit - Programmable backgauge range 750 mm via control unit - Plastic inserts for hold-downs - 1 side gauge and 2 sheet support arms - Finger guard - Portable foot switch with emergency stop - Spring-loaded stop in T-slot of support arms - Recirculating ball screw - Table plates with ball rollers - Upper blade with 2 cutting edges - Lower blade with 4 cutting edges - CE marking Optional equipment: - Adjustable angle stop 0–180° The machine can be inspected and demonstrated at our showroom in Staufenberg by appointment at any time. Additional machines are available and ready for demonstration at our Staufenberg location. Further information is available on request.

Stanje: novo, Leto izdelave: 2019, stiskalna sila: 400 t, Press force: 400 t Upright distance: 2,500 mm Stroke: 600 mm Table size: 2,500 x 2,000 mm Distance table - ram (bottom dead center): 600 mm Gsdpfx Agsd Ttydoweip Total power requirement: 18 kW Forward speed: 9 mm/sec Return speed: 19 mm/sec Pump capacity: 67 L/min Total weight approx.: 26 t

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, stiskalna sila: 200 t, Main Cylinder Press Capacity: 200 t - Maximum operating pressure: 285 bar - Cylinder stroke: 1500 mm - Clear width/clear height: 1500 mm - Distance between columns: 2050 mm - Max. lateral cylinder movement: 1450 mm - Max. longitudinal frame movement: 2800 mm - Table plate dimensions: 4000 x 2000 mm - Hydraulic unit power: 5.5 kW Gedpsxrb Nbefx Agwjip - Approach speed: 20 mm/s - Working speed: 2 mm/s - Hydraulic oil not included in the delivery - Hydraulic units are mounted on top of the press - Hydraulic block and valves by Rexroth - Air filter by FILTREC - Oil filter by FILTREC - Air and water (cooler) cooling system for hydraulics - Stroke cylinders integrated in the worktable Rod diameter: 25 mm - Stroke: 80 mm - Controlled via cylinder control system or hydraulic unit with lever control - 10 stroke cylinders installed - Digital control with position measurement via encoder and pressure measurement with value display - Siemens KTP 900 9" touchscreen display for programming (up to 99 programs): - Maximum cylinder stroke up/down - Pressure dwell time at bottom table - Decompression time - Setting the working pressure - Piece counter - Pre-stop up/down stroke accuracy of 0.1 mm - Alarm management - Frame-mounted display for real-time display of process parameters - Remote control unit with two buttons for simultaneous operation - Control cabinet with Siemens CPU - Hydraulic power unit with solenoid valves (replaces hanging control panel) - Air/oil heat exchanger with decompression valve 5. ELECTRICAL INSTALLATION AND SAFETY - The PLC system is SIEMENS (S7-1200 series) - Siemens 9" MTP900 LCD touchscreen integrated in control cabinet - Electrical equipment from SIEMENS, ALLEN BRADLEY, and PHOENIX - System pressure of the pressure cylinder is set via the LCD touchscreen - Operating mode (semi-automatic and automatic), power, vertical stroke, and dwell time of the upper cylinder are programmable - 99 recipes can be saved; all the above-mentioned values can be programmed in each recipe - Activation via remote control - Double button for slow or fast up/down movement, emergency stop, and maneuver confirmation switch - Safety light curtain is mounted at the bottom of the portal columns - Control cabinet mounted on side wall of bridge - Anti-rotation lock for the cylinder - Oil temperature is displayed on the LCD touchscreen - Overtemperature warning for hydraulic oil is displayed on the LCD touchscreen - Filter contamination status is displayed on the LCD touchscreen - System errors are displayed on the LCD touchscreen - Press status information is displayed on the LCD touchscreen - As soon as oil temperature reaches 45 °C, the air cooler starts to cool the oil. At 65 °C, the machine stops operation until it cools back down to operating temperature - An operating manual is included in the scope of delivery - The system fulfills all essential safety and health requirements according to CE regulations.

Stanje: novo, Leto izdelave: 2023, Tube drilling machine, angle drilling machine, automatic drilling unit TDM100, manual operation, equipped with one drilling head AVAILABLE IMMEDIATELY FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - Manual material clamping Gjdpfx Agelgvkisweip - Manual feed - Maximum tube length 3,000mm (option: 6,000mm) - Positioning accuracy +/- 0.2mm - 10 stops (can be extended as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube swiveling device - Drilling unit power: 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit lighting - Integrated tool cabinet - For round tubes up to 114mm - For square profiles up to 100 x 100mm - For flat material up to 100 x 15mm - For T-profiles up to 100 x 100 x 12mm - For L-profiles up to 100 x 100 x 8mm - For double posts up to 100 x 15mm - Flow drilling up to M12 - Drillings up to Ø 50mm

Stanje: zelo dobro (rabljeno), Odlično ohranjen šest vretenski stružni avtomat INDEX MS 25 s šetimi prečnimi on šestimi vzdolžnimi vodili orodij. Gsdpsqhkukefx Agwjip Cena je po dogovoru glede na izbrano dodatno opremo: vpenjalne stročnice, orodja, transporter odrezkov itd. Stroj še obratuje v proizvodnji. Po dogovoru možen ogled.

Stanje: novo, Ostas 3-Roller Plate Bending Machine ORM 1070 x 110 Technical Specifications: Special features included in the price: hardened rollers electrically powered rear roller adjustment Gedpsgkwhaofx Agwsip digital display Sheet width: 1070 mm Sheet thickness: max. 5.0 mm Bending sheet thickness: 4.0 mm Roll length: 1070 mm Roll diameter: 110 mm Weight: 1000 kg Dimensions (L x W x H): 2250 x 800 x 1100 mm Motor: 2.2 kW Equipment: Top and bottom rollers electrically driven Swing-out top roller Cone bending device Asymmetric roller arrangement Self-braking main motor Separate control and operation panel Safety rope CE mark

Stanje: novo, Primerljivo z Behringer, Kaltenbach, Kasto, Jaespa itd. Rezno območje 90° okroglo 260 mm ploščato 300x260 mm najmanjši premer 5 mm Gjdpfxoh Tnd Aj Agwsip NC-krmiljen, avtomatski podajalnik materiala s hidravličnim popolnim vpenjanjem materiala enostavno upravljanje preko NC-krmiljenja z jasnim tekstovnim prikazom Funkcija prednastavitve materiala brez ponovnega vpenjanja pri kratkih segmentih Stabilna, linearno vodena pomična čeljust s servopozicioniranjem za maksimalno natančnost Samodejna nastavitev vodila traku glede na širino materiala Priporočene opcije: poganjana krtača za ostružke, sinhronizirana s hitrostjo traku posebej postavljena nadzorna plošča 7" CE panel, možnost omrežne povezave, shranjevanje do 1000 zapisov, zgodovinski pomnilnik za različne funkcije in podatke itd.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1975, -KOM 1002- Offered here is a press from HYDRAP, model HKPS8000. Technical data: Gedpfjg Ufvbox Agwjip Type: HKPS8000 Year of manufacture: 1975 Usable stroke: 200 mm Throat depth: 250 mm (central) Table size: 320 x 320 mm Installation height: approx. 345 mm Voltage: 380V Permissible load: 80,000 N Drive type: HYDR (hydraulic) Motor power: 1.5 kW Oil capacity: 60 l Oil viscosity: 3°E You will receive a proper invoice with stated VAT upon purchase. We have many other interesting items for sale as well. Feel free to check out all our listings. If you are interested or have any questions, please feel free to contact us via the messaging function!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 5.157 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 642106, Precizni ravnalec za dele debeline 2-23 mm, do 1300 x 1250 mm Gjdpowa Nvbjfx Agweip