Sili Tuš nakup rabljenega (434)

Stanje: rabljeno, Leto izdelave: 1987, Pressure: 4000 kN Isdsynmncspfx Al Notf Table length: 2500 mm Table width: 2000 mm Installation height: 2500 mm Stroke: 2600 mm Tank capacity: 1000 l Total power requirement: 56 kVA Machine weight approx. 85 t Space required approx. 9.2 x 3.1 x 8.2 m Integrated wax unit with 0-5 bar injection pressure

Stanje: rabljeno, Leto izdelave: 1987, Pressure: 400 t Table length: 2500 mm Table width: 2000 mm Upright spacing: 2000 mm Stroke: 2600 mm Distance table/ram, stroke up: 2500 mm Table area: 2000 x 2500 mm Table height above floor: 1120 mm Ram surface: 2000 x 2500 mm Itodpovuumiefx Al Nof Side frame passage: 1500 mm Max. load capacity of swing-out plate: 20 t Oil capacity: 1000 l Drive power: 48.0 kW Weight: 85.0 t Required space (W x D x H): 8.6 x 5.3 x 8.2 m with tiltable ram, extendable table, tiltable table, ejector in the table Disassembled and stored – video available from seller prior to disassembly

Stanje: rabljeno, Leto izdelave: 1973, Tlak 40 t Razdalja med stebri 1150 mm Hod 1100 mm Razdalja miza/drogo, maksim. hod zgoraj, nastavitev zgoraj 1035 mm Površina mize 900 x 1280 mm Višina mize nad tlemi 630 mm Površina droga 1000 x 1200 mm Stranska širina med stebri 705 mm Itedpfoyx Inmox Al Nof Pogonska moč 5,5 kW Teža 9,0 t Prostorske mere (ŠxGxV) 2,35 x 3,8 x 3,55 m S pomičnim drogom, izvlečno mizo, izmetalcem v mizi

Stanje: rabljeno, Leto izdelave: 1979, Tlak 40 t Razdalja med stebri 620 mm Hod 975 mm Razdalja miza/bat, velik hod zgoraj, nastavitev zgoraj 940 mm Površina mize 590 x 1000 mm Višina mize nad tlemi 770 mm Površina bata 590 x 1000 mm Stranski prehod med stebri 470 mm Maks. teža kalupa 2,5 t Maks. nosilnost odklopne plošče 1,5 t Hitrost navzdol 0 - 50 mm/s Hitrost navzgor 0 - 34 mm/s Delovna hitrost 0 - 10 mm/s Vsebnost olja 150 l Pogonska moč 9,5 kW Teža 3,2 t Iodpfoyx Ingsx Al Notf Prostorske zahteve (ŠxGxV) 2,0 x 2,4 x 3,0 m S preklopnim batom, izvlečno mizo, izmetalcem v mizi

Stanje: rabljeno, Leto izdelave: 1988, Press force: 70 t Upright clearance: 750 mm Stroke: 900 mm Ijdpfx Aovuumpol Notf Table surface: 700 x 1000 mm Distance table/ram, stroke up: 900 mm Table height above floor: 680 mm Ram surface: 700 x 1000 mm Lateral upright opening: 600 mm Max. mould weight: 5.0 t Max. load capacity of swing-out plate: 2.0 t Downward speed: 0 - 50 mm/s Upward speed: 0 - 48 mm/s Working speed: 0 - 8 mm/s Oil capacity: 140 l Drive power: 9.5 kW Weight: 8.0 t Required space (WxDxH): 2.2 x 1.2 x 3.7 m With swivelling ram, extendable table, ejector in table Can be inspected under power at our warehouse

Leto izdelave: 1973, stanje: dober (rabljeno), številka stroja/vozila: 699, Press force: 40 t Table size: 670 x 470 mm Ram surface: 670 x 470 mm Clearance between columns: 620/470 mm Maximum installation height: 740 mm Pressing speed: 20 mm/s Rapid traverse: 50 mm Ejector force: 3 t Electrical connection: 380 V, 9.5 kW Space required: 2200 x 1875 x 3000 mm Weight: 2400 kg Ijdsy Dpbjpfx Al Njtf

Stanje: rabljeno, Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 04.015.00, razmak između stupova: 2.100 mm, širina mize: 2.000 mm, dolžina mize: 2.500 mm, skupna masa: 85.000 kg, hod: 2.600 mm, stiskalna sila: 200 t, Die spotting press by manufacturer Reis, sourced from automotive production, is now available for sale. The machine comes from the ongoing production of a renowned automotive manufacturer at the Berlin site. All maintenance and service intervals have been regularly performed. The unit is currently powered up and can be demonstrated in a production environment. Despite its year of manufacture, the machine is in technically flawless and well-maintained condition. It is ideally suited for precise spotting and adjustment work in tool and mold making. Inspection is possible at any time by prior appointment. Dismantling and loading are to be carried out by the buyer. Upon request, dismantling, loading, and transport organization can be handled by us for an additional charge. Here are the technical details of the machine offered: ##### Technical data & information: Spotting Press TUS 200 OK-200 #####General Specifications Itjdpsylu Sdsfx Al Nof - Model: TUS 200 OK-200 - Serial No.: 04.015.00 - Year of manufacture: 05/1989 - Manufacturer: REIS - Total weight: 85 t #####Press Force - Pressing force: 200 t - Operating pressure: 200 bar - Distance between uprights: 2100 × 1500 mm - Installation height (min. distance table–ram): 2500 mm - Max. ram stroke: 2600 mm #####Machine Frame - Configuration: vertical - Design: 4 columns Ø 300 mm - Number of hydraulic cylinders: 1 - Ram/Cylinder Ø: 360 mm #####Table - Table size: 2500x2000 mm - Clamping table - Design: movable platen - Clamping area: 2500 × 2000 mm - T-slots according to DIN: DIN 650 - Number of T-slots: 6 - T-slot width: 28 mm - Slot pitch: 350 / 700 mm - Thickness of clamping plate: 300 mm (Spotting press, try-out press, hydraulic press) ##### Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Directive, the European Machinery Directive (2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they are compliant in all aspects with the Brazilian national safety standard NR 12, which builds upon these regulations. Our core strength lies in custom machinery construction and press automation. We offer tailor-made hydraulic presses at surprisingly competitive prices. For the hydraulic systems, we predominantly use components from leading European manufacturers.

Stanje: rabljeno, Leto izdelave: 1981, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 03.010.00, razmak između stupova: 1.620 mm, širina mize: 1.600 mm, dolžina mize: 1.800 mm, širina plošče bata: 1.600 mm, dolžina plošče bata: 1.800 mm, skupna masa: 22.000 kg, hod: 1.800 mm, stiskalna sila: 200 t, Spotting press with injection unit – Manufacturer: Reis – from automotive production For sale is a spotting press with integrated injection unit from manufacturer Reis. The machine comes from the ongoing production of a renowned automotive manufacturer at the Berlin site. All maintenance and service intervals have been carried out regularly. The system is currently under power and can be demonstrated in a production environment. Despite its year of manufacture, the machine presents itself in technically flawless and well-maintained condition. It is particularly suitable for precise spotting and adjustment work in tool and mold making. An inspection is possible at any time by prior arrangement. Disassembly and loading are the responsibility of the buyer. Upon request, dismantling, loading, and transport organization can be provided by us for an additional charge. Technical data of the offered machine: ##### Technical Data & Information: TUS 160 OK – 200 #####General Information - Designation: Spotting press with injection unit TUS 160 OK - 200 - Design: Vertical / Column type - Manufacturer: REIS - Factory No.: 03.010.00 - Year of manufacture: 1981 - Total weight: 22 t #####Press Capacity - Press force (ram): 200 t - Ejector force: 30 t - Operating pressure: 200 bar - Accumulator: No. 05015 #####Machine frame - Type: 4 columns / Sheet frame - Pressure piston: 1 - Diameter: Ø 360 mm - Position: vertical, top #####Table - Table size: 1800x1600 mm #####Clamping table Clamping slots: - Number: 5 - Type: T-slot - Dimensions: 22 DIN 650 - Screw Ø: M 20 #####Ram Maximum stroke: 1800 mm Return force: 70 t #####Clamping slots: - Number: 5 - Type: T-slot - Dimensions: 22 DIN 650 - Screw Ø: M 20 #####Ejector - Ejector stroke: 190 mm (above clamping plate) #####Pump - Power requirement: 22 kW - Flow rate: 122 l/min - Speed: 1450 rpm (Spotting press, try-out press, test injection press, hydraulic press) ##### Looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery guidelines, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety standards, as they also comply with all aspects of the Brazilian national safety regulation NR 12, which builds upon these standards. Our core strength lies in custom machine construction and press automation. We offer tailor-made hydraulic presses, press brakes, and guillotine shears at surprisingly affordable prices. For the hydraulics of our presses, we mainly use components from leading European manufacturers. Itsdpfx Aeyluivsl Nsf

Stanje: dober (rabljeno), Leto izdelave: 1988, številka stroja/vozila: 03105, razmak između stupova: 1.300 mm, širina mize: 1.200 mm, dolžina mize: 1.500 mm, Own weight: approx. 16,000 kg, table size: approx. 1500x1200 mm, with sliding table and separate control/operation panel. Iedpfxjtdnnmo Al Netf

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Spotting press – Manufacturer: Reis – Model: TUS 130-100 – 26–100 t Spotting Press – Table 1,600 × 1,300 mm For sale is a spotting press from Reis, model TUS 130-100, featuring a variable pressing force adjustable between 26 and 100 t. The machine is equipped with a large table surface measuring 1,600 × 1,300 mm, a max. daylight of 1,700 mm, and extensive features such as a swing-away ram plate and integrated ejector. It is ideally suited for spotting, adjustment, and tryout work in tool and mould making. ==== Technical Data + Information: Spotting Press Reis TUS 130-100 – 26–100 t ==== General specifications - Manufacturer: Reis - Model: TUS 130-100 - Design: 4-column spotting press - Press force: 26 – 100 t (adjustable) - Machine weight: approx. 17,000 kg - Dimensions (W × D × H): 4,900 × 2,800 × 5,500 mm ==== Working area - Max. daylight: 1,700 mm ==== Table and ram - Table size: 1,600 × 1,300 mm - Max. table load: 12,000 kg - T-slots: DIN 650 – 22 mm ==== Forces - Return force: max. 45 t ==== Hydraulics - Hydraulic pump: Rexroth SYDFE2x/071R-PPA.. - Motor power: 15 kW - Operating pressure: max. 200 bar - Pressure accuracy: ± 5 bar - Oil tank volume: approx. 475 l - Hydraulic oil: HLP 36 ==== Electrical equipment - Main supply: 400 V AC Ijdpoxd Tv Djfx Al Netf - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection: 15 kW - Total connected load: approx. 21 kW ==== Control system - Siemens Simatic S7-634 - Operation via control panel - Functions: - Ram up / down - Ram tilting - Table extension - Ejector operation - Press force adjustment ==== Equipment - Swing-away ram plate: 180° (tiltable up to 7.5 t) - Integrated ejector in ram: 5.6 t / 160 mm stroke - Stroke extension: +300 mm - Increased speed ==== Documentation - Hydraulic diagram - Electrical diagram - Technical drawings - Data sheet ===== Spotting operations, tool adjustment, tool tryout, mould making, toolmaking, tryout operations, adjustment processes Spotting press, tool tryout press, tryout press, tool adjustment press, tool try out press, trial press, hydraulic press Are you looking for a hydraulic press tailored to your application? Contact us for a customised offer. Our hydraulic presses are manufactured in accordance with German machine guidelines as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, also fully complying with all aspects of the Brazilian national safety directive NR 12, which builds on these standards. Our core strengths are special-purpose machine construction and press automation. We offer custom-built hydraulic presses at surprisingly attractive prices. For the hydraulic systems, we mainly use components from leading European manufacturers.

Stanje: rabljeno, Leto izdelave: 1992, Pritisk 100 t Dolžina mize 1800 mm Širina mize 1550 mm Hod mize 2000 mm Vgradna višina 1800 mm Skupna potrebna moč 19,5 KVA Teža stroja pribl. 22 t Nazivna sila: 1000 KN Zgornja plošča nagibna Miza pomična Tehnični podatki so podatki proizvajalca ali upravljalca in zato niso zavezujoči za nas. Pridržujemo si pravico do vmesne prodaje; veljajo izključno naši splošni pogoji poslovanja in prodaje. O nas več kot 400 lastnih strojev na zalogi Itodpfxoyt R H Te Al Njf več kot 15.000 m² skladiščnih površin, nosilnost žerjava 70 t več kot 10.000 artiklov dodatne opreme za vašo delavnico

Stanje: rabljeno, Leto izdelave: 1985, Pressure: 200 t Table length: 1500 mm Table width: 1200 mm Column gap: 1250 mm Stroke: 1150 mm Table surface: 1200 x 1500 mm Distance table/ram, stroke up: 1475 mm Table height above floor: 638 mm Ram surface: 1200 x 1500 mm Weight: 16.0 t Isdpfxsvuul Ee Al Nstf Space requirements (W x D x H): 2.2 x 4.52 x 4.6 m with swivelling ram, extendable and tiltable table, ejector in table, spraying device in ram, ram locking via rack and pinion

Stanje: rabljeno, Leto izdelave: 1985, Pressure: 100 t Column clearance: 1250 mm Stroke: 1035 mm Table surface: 890 x 1280 mm Distance table/ram, max. stroke up, adjustment up: 1035 mm Table height above floor: 630 mm Ram surface: 1000 x 1200 mm Lateral column passage: 700 mm Isdpfovuumcjx Al Nstf Max. mould weight: 7 t Max. load capacity of swivel plate: 3.5 t Oil capacity: 180 l Drive power: 9.0 kW Weight: 11.0 t Space requirements (WxDxH): 2.1 x 3.8 x 3.9 m With pivoting ram, extendable table, tiltable table, ejector in table, hydraulic ram locking Press can be inspected in operation at our warehouse

Leto izdelave: 2011, stanje: kot nova (razstavni stroj), For sale: Soundproof emergency generator set Technical Specifications: Condition: Like new! Manufacturer: VISA ONIS Model: MA790 SS Engine: MAN 2842 LE 213 Generator: Marelli Output: 810 kVA RPM: 1500 RPM Frequency: 50 Hz Voltage: 230/400 Volt Operating hours: 50 hours Year of manufacture: 2011 Ijdpjp Auywefx Al Njtf - Complete with control unit featuring automatic start function - Incl. 900 litre diesel tank integrated in the base frame - Immediately available

Stanje: rabljeno, Leto izdelave: 1991, Pressure: 40 t Column width: 930 mm Stroke: 1100 mm Distance table/ram, large stroke at top, adjustment at top: 1035 mm Table surface: 900 x 1280 mm Table height above floor: 665 mm Ram surface: 900 x 1200 mm Lateral column passage: 700 mm Max. mould weight: 7.0 t Max. swiveling plate load capacity: 3.5 t Speed, downwards: 0 - 50 mm/s Speed, upwards: 0 - 34 mm/s Working speed: 0 - 10 mm/s Oil capacity: 140 l Itodpfxjvuul Se Al Nof Drive power: 9.5 kW Weight: 7.0 t Space requirements (W x D x H): 2.1 x 3.6 x 3.6 m With swiveling ram, retractable table. Can be offered either unused or in its current operational state. Video from the owner prior to disassembly is available.

Stanje: rabljeno, Leto izdelave: 1998, For sale is a used spotting press from the manufacturer Reis, featuring an adjustable pressing force of up to 100 tons. This 4-column press offers a table size of 1600 × 1300 mm, a maximum daylight of 950 mm, and is equipped with an ejector in the table, making it especially suitable for spotting, adjustment, and tool work in mold and tool making. ##### Technical Data & Information: Spotting Press – REIS TUS 80-100 ##### General Details - Designation: Spotting press - Manufacturer: REIS - Model: TUS 80-100 - Type: 4-column press - Year of manufacture: 1998 - Pressing force: 26–100 t (adjustable) - Maximum return force: 45 t - Table size: 1600 x 1300 mm - Max. table load: 5,000 kg - Max. daylight: 950 mm - Overall dimensions (W x D x H): approx. 3400 x 4200 x 3700 mm - Total weight: approx. 8,500 kg - T-slots: DIN 650 – 22 mm ##### Hydraulics - Hydraulic pump: Rexroth SYDFE11x71RN0030CAM - Motor power: 7.5 kW - Max. working pressure: 200 bar - Pressure accuracy: ±5 bar - Oil tank capacity: 215 L - Hydraulic oil: HLP 36 ##### Features / Equipment - 180° foldable ram plate (up to 3 t) Iedpfxexd Tiqj Al Notf - Table ejector (3.5 t / 130 mm) - Oil connection sockets for core pulls - Digital measuring system - Material feed through the ram plate possible (injection molding) - Increased speeds ##### Control - Operator panel - Siemens / Pilz control system - Functions: - Ram up / down - Tilt ram plate - Extend table - Operate ejector - Set pressing force - Operate core pulls / oil sockets ##### Electrical Connection - Main power supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor: 7.5 kW - Total connected load: approx. 10 kW (Spotting press, try-out press, tool adjustment press, toolmaking press, 4-column press, hydraulic press, REIS press, toolmaking spotting press)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Emergency power generator 125 kVA – as new/barely used Technical data: 100 kW / 125 kVA 230/400 V Current: 180 A Frequency: 50 Hz Itedetdb A Rjpfx Al Nef Year of manufacture: 12/2022 Manufactured according to ISO8528

Stanje: rabljeno, Leto izdelave: 1988, Druck 200 t Tischlänge 2500 mm Tischbreite 1800 mm Tischweg 2700 mm Einbauhöhe 2250 mm obere Aufspannfläche: 1800x2500 Ständergrundfläche 1900 mm Gesamtleistungsbedarf 22 KW Maschinengewicht ca. 30 t Raumbedarf ca. . m Nennkraft: 1000 KN Oberplatte schwenkbar Tisch verfahrbar Die technischen Daten sind Hersteller- bzw. Betreiberangaben und daher für uns unverbindlich. Einen Zwischenverkauf behalten wir uns vor; es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen. Über uns: - Mehr als 400 eigene Maschinen im Lager - Über 15.000 m² Lagerfläche, Krankapazität 70 t - Mehr als 10.000 Artikel Zubehör für Ihre Werkstatt Sie wollen Maschinen, Produktionslinien oder Ihren Betrieb verkaufen? Dann sprechen Sie uns gern an. Iedpfeyqvxisx Al Netf Weitere Angebote finden Sie auf unserer Webseite. Besichtigungen sind nach Absprache möglich. Wir freuen uns auf Ihren Besuch. Ihr Markus Hirsch Team

Stanje: rabljeno, Leto izdelave: 1981, Druck 100 t Tischlänge 1250 mm Tischbreite 900 mm Isdpfeyqvtmex Al Njtf Tischweg 1200 mm Einbauhöhe 700 mm obere Aufspannfläche: 1000x1200 Maschinengewicht ca. 12 t Raumbedarf ca. . m Nennkraft : 1000 KN Oberplatte schwenkbar Tisch verfahrbar Die techn. Daten sind Hersteller- bzw. Betreiberangaben und daher für uns unverbindlich. Einen Zwischenverkauf behalten wir uns vor; es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen. Über uns mehr als 400 eigene Maschinen im Lager über 15.000 m² Lagerfläche, Krankapazität 70 t mehr als 10.000 Artikel Zubehör für Ihre Werkstatt Sie wollen Maschinen Produktionslinien oder Ihren Betrieb verkaufen, dann sprechen Sie uns an. Weitere Angebote finden Sie auf unserer Webseite. Besichtigungen sind nach Absprache möglich. Wir freuen uns auf Ihren Besuch. Ihr Markus Hirsch Team

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1985, 1 rabljena preširna stiskalnica Iedoyb Stqjpfx Al Netf Proizvajalec: REIS Tip: TUS 160 OK 200 Leto izdelave: 1985 Tehnične podrobnosti: Tlačna sila: 200 t Dolžina mize: 2200 mm Širina mize: 1550 mm Vgradna višina: 2200 !! mm Povratna sila batnice: 6.000 kg Obremenitev mize: 10.000 kp Potrebna skupna moč: pribl. 25–30 kW Teža stroja pribl.: 30 t Potrebni prostor pribl.: 4 x 7 x 7 m Transportne mere pribl.: 13,4 x 3 x 3 m

Leto izdelave: 1990, stanje: pripravljen za uporabo (rabljen), Na voljo je Reis usklajevalna stiskalnica za orodjarstvo in izdelavo kalupov. Pritisna sila: 1000kN, vpenjalna površina: 1200mm/1500mm, vgradna višina: 1575mm, največja teža orodja: 10000kg, največja obremenitev vrtljive plošče: 4000kg, hod batnice: 1450mm, povratna sila: 400kN, hidravlični tlak: 190bar, pnevmatski tlak: 5bar. Dimenzije stroja X/Y/Z: pribl. 3200mm/4500mm/4100mm. Dokumentacija na voljo. Možen ogled na lokaciji. Itjdext Rl Ispfx Al Nof

Stanje: zelo dobro (rabljeno),

Stanje: dober (rabljeno), Leto izdelave: 1986, Pressing force: 400 kN Table size: 900 x 1,280 mm Ram size: 900 x 1,200 mm Mould weight: max. 7,000 kg Hydraulic motor power: 7.5 kW Stroke: 1,000 mm Itsdpfx Asthdbnol Nef Other features: - Mobile die table - Tilting table Weight: approx. 7,000 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 380 mm, stružna dolžina: 5.000 mm, premer struženja: 590 mm, izvrtina vretena: 72 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 25 obr/min, moč vretenovega motorja: 11 W, hitro pomikanje X-os: 8 m/min, CNC Lathe TUS 580 C Brand new CNC-controlled lathe with flat bed and Siemens Sinumerik 828D BASIC ShopTurn control. Delivery time: approx. 4 months after technical and commercial agreement. Center height [mm]: 290 Swing diameter over bed [mm]: 590 Swing diameter over cross slide [mm]: 380 Distance between centers [mm]: 1000/1500/2000/3000/4000/5000 Max. machining length [mm]: 1250/1750/2750/3750/4750/5750 Spindle bore [mm]: 72 Spindle nose [DIN]: 55027/8 Taper in main spindle [MT]: 8 Max. workpiece weight: - Between centers [kg]: 400 - In chuck and live center in tailstock [kg]: 600 - In chuck and steady rest [kg]: 800 - In chuck, steady rest and live center [kg]: 1300 - Cantilevered (Lmax = 250 mm) [kg]: 150 Bed width [mm]: 400 Turning tool cross-section (H x W) [mm]: 32 x 32 Multifix toolpost system [size]: C Speeds: Total speed range [rpm]: 25 to 2000 Number of gear stages: 3 Gear stage I [rpm]: 25 - 100 Gear stage II [rpm]: 100 - 400 Gear stage III [rpm]: 500 - 2000 Max. spindle torque [Nm]: 1200 - Gear stage I [Nm]: 1200 - Gear stage II [Nm]: 300 - Gear stage III [Nm]: 60 Travel: Longitudinal travel - X axis [mm]: 290 Longitudinal travel - Z axis [mm]: 1000/1500/2000/3000/4000/5000 Feed range: Feed rate in X/Z axis [mm/min]: 1 - 3000 Rapid traverse speed X axis [mm/min]: 8000 Rapid traverse speed Z axis [mm/min]: 8000 Axis drive torque: X axis [Nm]: 11 Z axis [Nm]: 16 Feed override [%]: 0 - 120 Tailstock: Quill diameter [mm]: 90 Iedpfsufgg Djx Al Nstf Quill travel [mm]: 230 Quill taper [MT]: 5 Drives: Main motor power [kW]: 11 Coolant pump motor power [kW]: 0.09 Total connected load [kVA]: 15 Space requirements/weight: Machine length at 1000 mm between centers [mm]: 3150 Machine length at 1500 mm between centers [mm]: 3650 Machine length at 2000 mm between centers [mm]: 4150 Machine length at 3000 mm between centers [mm]: 4650 Machine length at 4000 mm between centers [mm]: 5250 Machine length at 5000 mm between centers [mm]: 5750 Machine width, depending on configuration [mm]: 2000 Machine height, depending on configuration [mm]: 2000 Machine weight at 2000 mm between centers [kg]: 3800 Additional weight per 1000 mm distance between centers [kg]: approx. 500 Standard accessories: - Electrical equipment for 400 V / 50Hz three-phase, compliant with VDE 0113 - Siemens SINUMERIK 828D BASIC ShopTurn - Frequency converter for main drive - SIEMENS - Worklight - Quick-change tool post size C - Coolant unit with electric pump - Interlocked chuck guard - Rear chip guard - Front chip guard on compound slide - Operating manual, inspection certificate - CE and declaration of conformity - Machine color (similar to RAL 7035 RAL 7011) Options: - Fixed steady rest - 3-jaw and 4-jaw chucks - Faceplate - Chuck flange - Hydraulic tailstock quill - Power chuck - Turret head with turret disk - Drilling rest with boring bar - And much more

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 240 mm, izvrtina vretena: 80 mm, premer struženja: 400 mm, višina središča: 220 mm, stružna dolžina: 1.500 mm, poteza s peresom: 230 mm, premer tulec: 90 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 25 obr/min, premer nihanja nad prečnim premičnikom: 240 mm, širina postelje: 400 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Production Lathe MEXPOL TUS 400 – Available from Stock The MEXPOL TUS 400 is a high-performance production lathe designed for precise and efficient machining operations. With its robust construction, high drive power, and comprehensive standard equipment, the machine is ideally suited for continuous industrial use. Technical Data • Centre height: 220 mm • Swing over bed: 400 mm • Swing over cross slide: 240 mm • Distance between centres: 1,500 mm • Bed width: 400 mm • Spindle bore: 80 mm • Spindle mount: DIN 55027 / 8 • Main drive: 11 kW with frequency inverter • Speed range: 25 – 2,000 rpm (3 gear stages) • Maximum spindle torque: 1,200 Nm • Max. workpiece weight: o Between centres: 150 kg o In chuck with tailstock: 600 kg o With steady rest: up to 1,300 kg • Accuracy according to DIN 8606 • Electrical equipment: 400 V / 50 Hz • Noise level: max. 84 dB(A) Feeds and Thread Cutting • Longitudinal feed: 0.04 – 12 mm/rev • Cross feed: 0.02 – 6 mm/rev • Rapid traverse longitudinal/cross: 3,800 / 1,900 mm/min • Metric, inch, module, and DP threads without gear change Slide • Cross slide travel: 315 mm • Top slide travel: 130 mm Tailstock • Quill diameter: 90 mm • Quill taper: Morse taper MT 5 • Quill stroke: 230 mm Weight • Machine weight: approx. 2,500 kg Standard Equipment (excerpt) Itedjyhzgqopfx Al Nef • Frequency-controlled main drive • Quick-change tool post Multifix size C • Centralized lubrication for slide, headstock, and feed gearbox • Coolant system • Interlocked chuck guard • Travelling chip guard and rear chip wall • CE marking and declaration of conformity • Machine color RAL 7035 / RAL 7011 Options • Digital position indicator FAGOR INNOVA 30iT