Helmerding nakup rabljenega (22)

Stanje: zelo dobro (rabljeno), Pressure: 50 t Throat depth: 245 mm Stroke: 14 / 90 mm Ram adjustment: 75 mm Table height adjustment: 150 mm Bodpotrhf Aofx Abholc Strokes per minute: 42/85 Table surface: 700 x 490 mm Ram surface: 400 x 230 mm Ram pin bore: 40 mm Table through-hole: 240 x 140 mm Installation height (max. stroke up, ram adj. up): 360 mm Total power requirement: 4 kW Machine weight: approx. 3.41 t Space requirement: approx. 0.8 x 1.75 x 2.1 m Machine has been partially overhauled in-house as follows: - Disassembly, cleaning, and inspection - Table refaced - Machine repainted in light grey / gentian blue, ram assembly in orange - Shaft crack inspection performed - Ortlinghaus KBK + additional brake disassembled, cleaned, tested, seals replaced - Additional air reservoir - New control cabinet with safety control and touchscreen display - New machine wiring - New Vogel central lubrication system with pipework (formerly manual lubrication points) - New Herion press safety valve + maintenance unit - New Balluff cam switchgear - New two-hand control panel - New foot switch - Current DGUV safety inspection with brake time measurement - Machine made safe for manual infeed operations

Stanje: rabljeno, Presse excentrique à col de cygne HELMERDING type EH 25 B No de machine : 5917 Année de fabrication : 1993 Force de pressage : 25 tonnes Profondeur de col de cygne : 180 mm Table : 560 x 360 mm Surface du coulisseau : 315 x 150 mm Ouverture de passage dans la table : 150 x 100 mm Réglage de la course : 8 - 82 mm Course réglable du coulisseau : 60 mm Hauteur d'installation max. : 330 mm Alésage pour tenon de fixation : Ø 40 mm Fréquence des coups : 145 coups/min Réglage en hauteur de la table : 150 mm Hauteur de table au-dessus du sol : 630 - 780 mm Puissance moteur : 1,5 kW Raccordement électrique : 400 V, 50 Hz - Embrayage-frein hydraulique, marque : ORTLINGHAUS - Pédale électrique et commande bimanuelle - Graissage centralisé automatique, BEKA Schmiertechnik - Armoire électrique avec commande à contacteurs bi-canal - Table de presse réglable en hauteur par 2 vis de réglage - Sécurité UVV selon VBG 7n 5.1 pour travail manuel - Schéma électrique Blodpfx Asyath Tjbhoc Encombrement (L x l x h) : 1600 x 1100 x 1900 mm Poids : 2 tonnes Bon état

Stanje: rabljeno, Leto izdelave: 1991, Tlačna moč 1.500 kN Nastavljiv hod 20 - 132 mm Nastavitev batnice maks. 90 mm Bjdpsrm Nqmofx Abhelc Število hodov 50 / 75 1/min. Dodatni podatki in slike na zahtevo Rabljena, stiskalnica je bila popolnoma razstavljena Ni delujoča in zahteva mehansko ter električno obnovo Stiskalnica je trenutno mehansko ponovno sestavljena

Stanje: rabljeno, Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Tiskalna sila: 5.000 kN Površina mize: 2.400 mm x 1.700 mm Površina bata: 2.400 mm x 1.400 mm Nastavljiv hod: 25 mm - 200 mm Maks. nastavitev bata: 200 mm Število hodov: 20 - 100 1/min Pogonska moč: 84 kW Teža stroja cca 62.500 kg Z valjčnim podajalnikom in ravnalno kombinacijo + odvijalec Bljdpfxjyg Emzs Abhjc Dodatni podatki in slike na zahtevo

Stanje: rabljeno, Leto izdelave: 1980, Tlačna moč 1.100 kN Nastavljiv hod 20 - 120 mm Največja nastavitev batnice 85 mm Število hodov 35 / 70 1/min Teža stroja pribl. 5.100 kg Dodatni podatki in slike na zahtevo Bedpfx Ajyg Ecpebhelc

Stanje: rabljeno, Leto izdelave: 1984, Tlačna moč 1.500 kN Nastavljiv hod 20 - 120 mm Nastavitev bata maks. 85 mm Število hodov 50 / 75 1/min. Teža stroja ca. 8.000 kg Dodatni podatki in slike na zahtevo Bjdpfxoyg Ebxo Abhjlc

Stanje: rabljeno, Leto izdelave: 1989, Tlačna sila 1.500 kN Nastavljiv hod 20 - 132 mm Nastavitev bata maks. 90 mm Število hodov 50 / 75 1/min. Blodpeyg D U Rsfx Abhsc Teža stroja cca 8.900 kg Dodatni podatki in slike na zahtevo

Stanje: dober (rabljeno), Leto izdelave: 1977, 1 rabljena ekscentrična stiskalnica Proizvajalec: Helmerding Tip: EL 35 B Leto izdelave: 1977 Bljdpfjwxxr Asx Abhoc Št. stroja: 5182 Tlačna moč: 350 kN Nastavljiv hod: 12 - 80 mm Nastavljiv hod batu: 70 mm Število gibov bata na minuto: 110 Nastavljiva miza: 150 mm Varnostna razdalja: 150 mm Zaviralna pot: 50 mm Teža: 2050 kg Opremljena z varnostnim ventilom za stiskalnico

Leto izdelave: 2008, Stanje: rabljeno, Pressure: 315 t Stroke: 40–200 mm Stroke rate: 20–100 strokes/min Slide adjustment: 120 mm Slide area: 2000x1100 mm Bolster area: 2000x1200 mm Die opening in table: 1700x250 mm Shut height (bottom), slide adjustment top: 500 mm Side frame window: 820x650 mm Total power requirement: 45 kW Machine weight: approx. 44 t Hydraulic clutch-brake combination Hydraulic overload protection in slide Semi-automatic stroke adjustment Motorized slide adjustment Stroke rate frequency-controlled Central grease lubrication for guides Oil circulation lubrication Slide counterbalance cylinders Safety doors front/rear Hydraulic die clamping system Extendable bolster plate Hydraulic rollblock strips in table Feed unit: Helmerding EWH800/150 (V-1341-6518) Strip width: 100–800 mm, strip thickness: 0.5–6.0 mm, max. strip cross-section: 1600 mm² Loop control, height adjustment via geared motor Straightener: R-70/800/9-S (R-1343-6518) Strip width: 100–800 mm, strip thickness: 0.5–4.0 mm, Max. strip cross-section: 1600 mm² at 450 N/mm² Straightening speed, frequency-controlled up to 25 m/min Strip introduction aid: transfer table with hydraulic separating wedge, hydraulically adjustable Hold-down hydraulically adjustable Strip edge guidance: 1 pair of lateral roller guides, adjustable via handwheel Feed rollers: 2x rollers Ø140 mm, pneumatically adjustable Straightener: 9x rollers Ø70 mm, adjustment manual via handwheel Decoiler: HE-4/800/MOT/HYD (H-1342-6518) Strip width: 100–800 mm Max. load: 4 t Coil inner diameter: Ø508 mm Coil outer diameter: Ø1000–1600 mm Drive, frequency-controlled Limiting arms Bedpfx Aberdi Dlohslc Hydraulic expansion Hydraulic hold-down arm

Leto izdelave: 1985, Stanje: rabljeno, Pressure: 110 t Throat depth: 295 mm Stroke: 20-120 mm Strokes per minute: 60/90 spm Slide adjustment: 85 mm Table surface: 920x580 mm Slide surface: 540x280 mm Pass-through opening in table: 300x180 mm Table height: 830 mm Ram bore diameter: 50 mm Machine weight approx.: 5.1 t Bodpfx Ajlp U Rvebhjlc Space requirement approx. (WxDxH): 1500x2000x2500 mm Machine no.: 5591 Hydraulic clutch-brake combination Manual central lubrication (grease) Mechanical overload protection in slide Manual stroke adjustment Manual slide adjustment

Leto izdelave: 1987, Stanje: rabljeno, Pressure: 150 t Throat depth: 350 mm Stroke: 20–120 mm Strokes per minute: 50 / 75 spm Ram adjustment: 85 mm Table size: 1150 x 670 mm Ram surface: 800 x 380 mm Through-hole in table: 330 x 200 mm Table height: 800 mm Pin bore in ram: Ø 50 mm Machine weight: approx. 8 t Bedpfx Ajp Apxhebhelc Space requirement (WxDxH): approx. 2000 x 2000 x 2700 mm Features: - Hydraulic clutch-brake combination - Centralized oil lubrication - Mechanical overload protection in ram - Semi-automatic stroke adjustment - Manual ram adjustment - Two-hand control - Foot pedal operation - Counter bearing

Leto izdelave: 1982, Stanje: rabljeno, Pressure: 150 t Throat depth: 350 mm Stroke: 20-120 mm Blsdslp U Iwjpfx Abhoc Strokes per minute: 40-60 Ram adjustment: 85 mm Table surface: 1050x690 mm Ram surface: 650x320 mm Passage hole in table: 325x200 mm Table height: 850 mm Pin hole in ram: Ø 50 mm Machine weight approx.: 8.6 t Space requirement approx.: 2500x2500x2900 mm Manual central grease lubrication Pneumatic clutch-brake combination Mechanical overload protection (shear plate) in the ram Two-hand operation Foot operation

Stanje: rabljeno, Leto izdelave: 1986, Pritisk 35 t Izteg 240 mm Hod 12-84 mm Število hodov 135 hod/min Nastavitev batnice 70 mm Površina mize 600x450 mm Površina batnice 360x180 mm Prehodna odprtina v mizi 220x130 mm Višina mize 630 mm Luknja v batnici Ø35 mm Teža stroja cca. 2,5 t Prostorske mere (ŠxGxV) cca 1500x2000x2600 mm Hidravlična spojčno-zavorna kombinacija Mehanska varovalna plošča v batnici Ročna nastavitev hoda Ročna nastavitev batnice Bsdpoxh Sx Ejfx Abhslc Ročno centralno mazanje Višinsko nastavljiva miza Dvoroka upravljalna naprava

Stanje: rabljeno, Drilling machine, pillar drill, column drill, core pillar drill, box column drill, thread cutting machine, tapping machine - Machine: is in very good condition with exceptionally smooth running Bedpfx Abshv S Etjhslc - Manufacturer: HIW Helmerding, pillar drilling machine - Motor: 1.0/1.6 kW - Speeds: 95 - 1050 rpm, 8 steps - Feed: 0.08/0.16/0.28 mm/rev - Table size: 500 x 400 mm, travel distance 685 mm - Spindle taper: MT3 - Spindle stroke: 180 mm - Throat depth: 280 mm - Dimensions: 1100/650/H2340 mm - Weight: 690 kg

Leto izdelave: 1990, Stanje: rabljeno, Pressure: 75 t Outreach: 300 mm Stroke: 8 – 110 mm Table surface: 750 x 600 mm Ram adjustment: 75 mm Ram surface: 430 x 230 mm Through-hole in table: 250 x 150 mm Pin hole in ram: 40 mm Stroke rate: 60 + 90 strokes/min Machine weight: approx. 4.4 t Total power requirement: 4.5 – 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram with stroke down, ram down: 19 mm Distance table/ram with stroke up, ram up: 380 mm Blsdpod Nl E Ujfx Abhjc Equipment: - With hydraulic clutch-brake combination, new hydraulics and oil cooler - With gear train in oil bath - Fixed table prepared for mounting of tool change consoles - 2 roller strips in the table - Mechanical overload protection in ram (shear plate) The following works are carried out on the machine / Partial overhaul: - Machine completely disassembled, inspected, seals replaced, defective parts exchanged, etc. - Machine repainted - New Balluff cam switch - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication system - New control cabinet with touch panel and ABB safety control - Current UVV safety inspection with brake time measurement

Leto izdelave: 1988, Stanje: rabljeno, Pressure 100 t Outreach 300 mm Stroke 20 - 124 mm Bsdpfx Aeguz Sujbhslc Strokes per minute 60/90 Ram adjustment 85 mm Table size 920 x 600 mm Ram area 540 x 290 mm Installation height with large stroke up and ram adjustment up max. 440 mm Through-hole in table 290 x 170 mm Pin hole in ram diameter 50 mm Total power requirement 6.5 – 8.5 kW Machine weight approx. 5.7 t Required space: approx. ... m (please complete) Equipment: - Gear-driven wheel mechanism - 3-point supported shaft - Semi-automatic stroke adjustment - Oil circulation lubrication - Hydraulic clutch - Separate hydraulic unit with oil cooler The machine will be partially overhauled as follows: - Disassembly and inspection - Connecting rod receives a new bushing and will be re-bored - New paintwork - New control cabinet with touch panel and ABB safety control - New wiring - Up-to-date safety inspection (UVV) with brake time measurement

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SV 18RA, zunanji premer vpenjalne glave: 200 mm, Zelo dobro ohranjeni stružnica na prodaj Blodpoxv Sm Eefx Abhjc

Stanje: rabljeno, Frame punch - swing frame punch - flatbed die cutter - platen punch - eccentric press Punch + feeder for use with band knife die cutting tools Flatbed die cutter HELMERDING Type PSH 25 Order No. EP 97784 Machine No. 6073 Year of manufacture 1998 Pressing force 25 tons Clearance between tie rods 700 mm Table area = installation space 800 x 670 mm Blodpfx Asdzqmzsbhsc Table area = installation frame width 510 x depth 440 mm, plate thickness 20 mm Ram area 800 x 670 mm Drop-through hole in the table 490 x 420 mm Ram stroke 45 mm Ram adjustment range 10 mm Installation height = tool height 100 mm Strokes per minute up to 250 strokes/min Motor power 15 kW Power supply 400 Volt, 50 Hz - controlled drive for infinitely variable stroke rate - pneumatic clutch-brake combination - ram counterbalance cylinder - automatic central lubrication system VOGEL - heavy-duty base plate with 4 vibration dampers beneath the machine Required space L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons Good condition Previously, the machine was used for punching cardboard blanks. Ideal for punching non-woven fabrics or similar materials for respiratory masks.

Leto izdelave: 1997, Stanje: pripravljen za uporabo (rabljen), A complete stamping line with Helmerding eccentric press is available. 1) Helmerding KDH 100 eccentric press, year of manufacture: 1997, power: 11 kW, press force 30° before BDC: 100 t, stroke adjustment: 8 mm–110 mm, ram adjustment: 80 mm, strokes: 40–140 per min, length: 2,100 mm, width: 1,500 mm, weight: approx. 12,000 kg. 2) Kohler 1000.1 decoiler, year of manufacture: 1983, power: 1 kW, load capacity: 1,000 kg, length: 1,500 mm, width: 1,100 mm. 3) Kötje RM-7-300-60 straightening machine (pre-setting device), year of manufacture: 1998, power: 3 kW, max. strip width: 300 mm, straightening roller diameter: 60 mm, number of straightening rollers: 7, length: 1,400 mm, width: 1,200 mm. 4) Kötje EWV 80-50-S roll feeder, year of manufacture: 1998, power: 4 kW, length: 750 mm, width: 700 mm. Bedpfxevnd Sne Abhjlc Documentation is available. An on-site inspection is possible.

Stanje: rabljeno,

Stanje: dober (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, globina grla: 180 mm, nastavitev hidravličnega cilindra: 60 mm, skupna višina: 2.000 mm, širina mize: 360 mm, dolžina mize: 560 mm, skupna širina: 950 mm, skupna dolžina: 1.680 mm, skupna masa: 1.750 kg, stiskalna sila: 25 t, Throat depth 180 mm Minimum distance between press table and ram at maximum stroke down, Ram adjustment down 50 mm Blsdpet Sgrujfx Abhoc Maximum distance between press table and ram at maximum stroke up, Ram adjustment up 340 mm Pass-through hole in the table 150 x 100 mm Table adjustment 150 mm Ram stroke 12–80 mm

Stanje: zelo dobro (rabljeno), For sale: well-maintained Helmerding eccentric press. Very little used! Bledpfxofdnw He Abhsc