Ekscentrični stiskalnici - en stolpec
HELMERDING ERH 75 B

Name: HELMERDING ERH 75 B
Brand: HELMERDING
Availability: InStock

Leto izdelave

1990

Stanje

Rabljeno

Lokacija

Schmölln

Ekscentrični stiskalnici - en stolpec HELMERDING ERH 75 B

Prikaži karto

Podatki o stroju

Opis stroja:: Ekscentrični stiskalnici - en stolpec

Proizvajalec:: HELMERDING

Model:: ERH 75 B

Leto izdelave:: 1990

Stanje:: rabljeno

Cena in lokacija

Lokacija:: 04626 Schmölln

Klic

Podrobnosti ponudbe

ID ponudbe:: A4040479

Št. reference:: 1010-866

Nazadnje posodobljeno:: dne 07.05.2024

Opis

Pressure: 75 t
Outreach: 300 mm
Stroke: 8 – 110 mm
Table surface: 750 x 600 mm
Ram adjustment: 75 mm
Ram surface: 430 x 230 mm
Through-hole in table: 250 x 150 mm
Pin hole in ram: 40 mm
Stroke rate: 60 + 90 strokes/min
Machine weight: approx. 4.4 t
Total power requirement: 4.5 – 6.8 kW
Space requirement: approx. 1.95 x 1.1 x 2.35 m
Distance table/ram with stroke down, ram down: 19 mm
Distance table/ram with stroke up, ram up: 380 mm

Equipment:
- With hydraulic clutch-brake combination, new hydraulics and oil cooler
- With gear train in oil bath
- Fixed table prepared for mounting of tool change consoles
- 2 roller strips in the table
- Mechanical overload protection in ram (shear plate)

The following works are carried out on the machine / Partial overhaul:
- Machine completely disassembled, inspected, seals replaced, defective parts exchanged, etc.
- Machine repainted
- New Balluff cam switch
- New hydraulic unit with oil cooler for clutch
- New Vogel central lubrication system
- New control cabinet with touch panel and ABB safety control
- Current UVV safety inspection with brake time measurement
Nedpfx Adod Nl E Uoljdd

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Ponudnik

Registriran od: 2013

76 Oglasi na spletu

Klic

Pošlji zahtevo

Telefon & Faks

+49 34491... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

mali oglas

Obdelovalni center Emmegi Comet T6 Emmegi Comet T6

Scerne

397 km

Obdelovalni center Emmegi Comet T6
EmmegiComet T6

Klic

Leto izdelave: 2002, Stanje: dober (rabljeno), AXES TRAVEL X AXIS (longitudinal) (mm): 7,700 Y AXIS (transversal) (mm): 470 Z AXIS (vertical) (mm): 420 A AXIS (spindle rotation): 0° ÷ 180° ELECTROSPINDLE Maximum power in S1 (kW): 8 Maximum speed (rpm): 24,000 Tool holder taper: HSK - 63F Automatic tool clamping: ● Cooling with heat exchanger: ● Nsdpfx Aorupldodlsdd ONBOARD AUTOMATIC TOOL MAGAZINE Maximum number of tools in magazine: 8 Maximum number of angular heads insertable in the tool magazine: 2 Maximum saw blade diameter storable in the magazine (mm): Ø = 180 FUNCTIONALITY Multi-piece operation: ● Dynamic pendulum operation: ● WORKABLE FACES With direct tool (top face, side faces): 3 With angular unit (side faces, end faces): 2 + 2 With saw blade tool (top face, side faces, end faces): 1 + 2 + 2 TAPPING CAPACITY With compensator: M8 Rigid (optional): M10 WORKPIECE CLAMPING Standard number of clamps: 8 Maximum number of clamps: 12 Independent motorized clamps: ● Maximum number of clamps per zone: 6

Poglej podrobnosti

mali oglas

Samodejna izsekavanje Press BRUDERER BSTA 30

Eislingen/Fils

489 km

Samodejna izsekavanje Press
BRUDERERBSTA 30

Klic

Stanje: rabljeno, Leto izdelave: 1979, številka stroja/vozila: 5255, Pressure: 30 t Stroke rate: 100–600 strokes/min Sheet width: 120 mm Table size: 540 x 450 mm BRUDERER precision double-roll feeder: left side Adjustable stroke (min–max): 16–40 mm Ndsdpfxscxxu Nj Adljd Distance between columns: 330 x 300 mm Total power requirement: 5.5 kW Machine weight approx.: 3 t Space requirement approx.: 2.10 x 1.65 x 0.75 m High-speed stamping press in three-column design, equipped with air cooler, piece counter, separate control cabinet, air clutch, and BRUDERER precision double-roll feeder, left side.

Poglej podrobnosti

mali oglas

Stružnica - ciklično krmiljena WEILER C 50

Wölzing-Fischering

70 km

Stružnica - ciklično krmiljena
WEILERC 50

32.500 €

Stalna cena brez DDV

Klic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 83 mm, stružna dolžina: 1.000 mm, premer struženja: 570 mm, premer struženja nad zgornjim sanežem: 340 mm, premer tulec: 80 mm, hod vretena: 200 mm, skupna masa: 3.200 kg, zunanji premer vpenjalne glave: 250 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Machine is in very good condition. Ndodowxw S Ispfx Adlod Available immediately! Can be tested under power.

Poglej podrobnosti

mali oglas

Villingen-Schwenningen

532 km

Avtomatski stroj za izsekovanje
BSTA 18

Klic

Stanje: generalkompletno obnovljen (rabljeno), Maximum pressing force: 180 kN (18 tons). Stroke rate: 100 to 600 strokes per minute. Maximum strip width: 60 mm. Maximum feed length: 60 mm. Maximum strip thickness: 2 mm. Adjustable stroke: 4 - 36 mm. In very good condition. Programmable speed and number of strokes. Three operating modes: manual, single stroke, and automatic. Pneumatic clutch and brake. Machine comes with a 6-month warranty. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx. 1.2 tons. Power consumption: 2.2 kW. Nodpfx Aefmavxodlodd Technical air supply: 8 bar. More high-speed presses in stock, including Bruderer models BSTA 18, 20, 30, 200, 50, as well as Schaal and Mabu presses.

Poglej podrobnosti

mali oglas

Stiskanje štancanje upogibanje nekdanji stroj BIHLER RM 40

Lyon

789 km

Stiskanje štancanje upogibanje nekdanji stroj
BIHLERRM 40

Klic

Leto izdelave: 1984, Stanje: dober (rabljeno), Bihler RM 40 (1984) – večsmerni stroj za prebijanje, prešanje in upogibanje Stroj je prikazan s petimi pomičnimi enotami (slajdi), na voljo je tudi šesta. Na voljo je več odvijalcev za pločevino ali žico. Stroj ima 8-tonski prešo in 5 ali 6 pomičnih enot, hidravlično vpenjanje za žico ali pločevino. Ena od naprav je opremljena z dodatnim podajalnim sistemom, ki dovaja material s hrbtne strani stroja skozi sredinsko odprtino. Ndodpfx Aoh T Ulyodljd

Poglej podrobnosti

mali oglas

Laserski stroj - Laserski stroj za rezanje MAZAK Hyper Gear 510

Großrudestedt

621 km

Laserski stroj - Laserski stroj za rezanje
MAZAKHyper Gear 510

Klic

Leto izdelave: 2007, Stanje: zelo dobro (rabljeno), TOP CONDITION - OVERHAULED IN 2022! Year of manufacture: 2007 Table size: 3000 x 1500 x 100 mm Power: 4000 W Control unit: Mazatrol Preview with LAN/USB Includes chiller Includes linear drives on all axes Includes programming software Includes training Includes commissioning Includes fast piercing Includes ball transfer table Includes 4-position head change magazine Includes 2 cutting heads Ndjdpfxohturvs Adled Includes 10-position automatic nozzle changer Mild steel: up to 24 mm Stainless steel: up to 15 mm oxide-free Designed for high-pressure cutting up to 20 bar No foundation required! Regularly maintained Optional: Automatic loading and unloading with Mazak CELL510 INCLUDING warranty / commissioning / training

Poglej podrobnosti

mali oglas

Štiri čeljustna vpenjalna glava (28188) tip Wescott ROTO RECORD DHK 315 x 4

Tönisvorst

849 km

Štiri čeljustna vpenjalna glava (28188) tip Wescott
ROTO RECORDDHK 315 x 4

Klic

mali oglas

Vretenska stružnica za vodenje in vlečenje WEILER Primus GS 4443

Burgoberbach

476 km

Vretenska stružnica za vodenje in vlečenje
WEILERPrimus GS 4443

5.500 €

Stalna cena brez DDV

Klic

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, For sale: WEILER lathe, model Primus LZ-GS The machine is in excellent condition. Technical specifications: Year of manufacture: 1989 Machine no.: 4443 Operating voltage: 380 V Centre height: 120 mm Centre distance: 430 mm Spindle speed: 60 - 3,000 rpm with 18 geared steps Spindle bore: 23 mm Short taper spindle nose, DIN 55027 Tailstock: MT 2 Feeds: 0.03 to 0.15 mm/rev Threads possible: metric, imperial, module, and diametral-pitch Metric thread pitches: 0.25 to 2.5 mm Dimensions (LxHxD): 1.2 m x 1.3 m x 0.65 m Prices are subject to VAT. Nedpjihig Isfx Adlsdd Inspections are possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or contact options, please visit our website.

Poglej podrobnosti

mali oglas

Stroj za krtačenje, stroj za brušenje, stroj za odstranjevanje napak - Italy MASTER ROTOR 400.2 / Special 5

Egenhofen

373 km

Stroj za krtačenje, stroj za brušenje, stroj za odstranjevanje napak
- ItalyMASTER ROTOR 400.2 / Special 5

Klic

Stanje: novo, Leto izdelave: 2024, Delovna širina: 380 mm Delovna višina: 150 mm 1. Sklop, rotorska skupina: Skupina 5 nihajnih rotorskih ščetk, Ø 115 mm, vsaka z motorjem 3 kW 2. Sklop, ščetka: Scotch Brite Hard / premer 210 mm, variabilni pogon Nastavitev višine: ročni ročaj Prikaz višine: mehanski števec Hitrost podajanja: 4 - 12 m/min Moč pogonskega motorja: 0,37 kW Vakuumska preproga: da Dolžina stroja: 1400 mm Širina stroja: 900 mm Teža: 500 kg Nsdpfxotnf Rrs Adlodd

Poglej podrobnosti

mali oglas

Varjenje pa tabele, visoka nastavljiva Protec KT 600 HV

Hergensweiler

430 km

Varjenje pa tabele, visoka nastavljiva
ProtecKT 600 HV

Klic

Stanje: kot nova (razstavni stroj), 600 kg load capacity welding positioner, height-adjustable, with a table diameter of 1,000 mm. Height adjustable from a minimum of 0.65 m to a maximum of 1.53 m. Rotation speed from 0.01 to 1.1 rpm. Tilting angle up to 135°. Manual and foot remote control with speed display. Very robust design. Njdpfx Adjd D D Hloljdd

Poglej podrobnosti

Oglašujte tukaj