Ekscentrični tisk

Helmerding EH 25

Stanje: dober (rabljeno), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Steady arm throat (horizontal): 670 mm Steady arm throat (vertical): 940 mm Ram stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Hjdpfx Aokvnumsf Tjng Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Stanje: dober (rabljeno), Leto izdelave: 2001, dolžina brušenja: 650 mm, širina brušenja: 525 mm, skupna višina: 350 mm, dolžina mize: 600 mm, širina mize: 350 mm, Manufacturer: Geibel & Hotz Model: FS 635-Z SA Control: Digital readout Year of manufacture: 2001 Magnetic table 600 x 350 mm Enclosed housing for CE compliance Vertical automatic feed (SA) Automatic lubrication Coolant tank Hedpfxevdal Ao Af Tong Specifications Metric / US Standard X-axis 650 mm Y-axis 525 mm Z-axis 350 mm Table length 600 mm Table width 350 mm Table load capacity 400 kg Feed rate X-axis 35,000 mm/min Feed rate Z-axis 1,000 mm/min Grinding wheel size 300 x 50 x 76.2 mm Power 3.7 kW Speed 2,800 rpm Dimensions (approximate) Length 3,200 mm Width 2,000 mm Height 2,870 mm Weight 2,300 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or contractual terms. We recommend verifying all important details.

Stanje: dober (rabljeno), 16 pieces external turning tool holders Hodpfxsikn E Ho Af Teng 41 pieces internal turning tool holders

Stanje: rabljeno, Leto izdelave: 1986, Grinding diameter: 350 mm Grinding length: 600 mm Center height: 175 mm Very well-maintained machine. Hnjdpfxov Tqqns Af Tjg The machine comes from a precision grinding workshop in the Black Forest. It can still be inspected under power at the seller’s site for a short time. In 2022, the machine underwent partial overhaul and maintenance at our facility, including geometry restoration according to the manufacturer’s protocol. Equipment: - 2-axis FAGOR digital readout - Sine bar - Tailstock with fine adjustment - Hydraulic tailstock - Face grinding attachment - Internal grinding attachment - Internal grinding spindle Fischer UJ70 - Paper band filter - Automatic cycle: roughing – finishing – spark out – return

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1984, Pressing force: 3,600 kN, Pressing stroke: 1.7 mm, Pressing capacity: 6,120 J. Stroke: 60 mm, Installation height: 340 mm. Table clamping width/depth: 440 mm/525 mm, Tool holder width/depth: 440 mm/320 mm. Dimensions (LxWxH): 1,300 mm x 2,000 mm x 2,230 mm, Weight: approx. 6,300 kg. Hnjdpfxjr A Eifj Af Teg

Leto izdelave: 2002, Stanje: rabljeno, Pressure: 63 t Reach: 315 mm Hnedpfx Afjlp U D Te Tog Stroke: 8–100 mm Stroke rate: 140 strokes/min Ram adjustment: 63 mm Table surface: 1200 x 630 mm Ram surface: 800 x 315 mm Through hole in table: Ø 110 mm Table height: 820 mm Ram bore: Ø 50 mm Installation height: 335 mm Total power requirement: 7.5 kW Machine weight: approx. 5 t Pneumatic clutch-brake combination Centralized oil lubrication Hydraulic overload protection Manual stroke adjustment Manual ram adjustment Two-hand operation Foot control Roller block strips in table Hydraulic clamp on the ram Counterbalance cylinder Approved for manual loading operations

Stanje: rabljeno, Leto izdelave: 2001, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, hitro pomikanje X-os: 12 m/min, hitri pomik os Y: 12 m/min, hitri pomik na osi Z: 12 m/min, nazivna (navidezna) moč: 17 kVA, vrtilni moment: 82 Nm, proizvajalec krmilnikov: Heidenhain, model krmilnika: Mill Plus, skupna višina: 2.450 mm, skupna dolžina: 4.000 mm, skupna širina: 2.200 mm, širina mize: 700 mm, dolžina mize: 500 mm, obremenitev mize: 200 kg, skupna masa: 3.500 kg, We offer a Deckel Maho DMU 50 T with Heidenhain Mill Plus control for sale. Hjdpfxow Dfbhs Af Tong

Stanje: novo, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Hodpfxob U Hwps Af Teng Table surface: 520 x 400 mm Stroke rate: 160 strokes/min Ram surface: 160 x 160 mm Ram adjustment: 40 mm Ram bore: 32 H7 mm Throughhole in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Total power requirement: 2.7 kW Machine weight approx.: 1.9 t Space requirement approx.: 1.3 x 1.0 x 1.85 m - Ortlinghaus pneumatic clutch/brake combination - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: novo, Pressure: 40 t Hodpfob U Hwtjx Af Tsng Throat depth: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Ram bore: 40 H7 mm Through-hole in table: 210 x 170 mm T-slots: 22 Clamping plate: 570 x 450 x 65 mm Total connected load: 3.5 kW Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m - Hydraulic clutch-brake combination - Central lubrication (Vogel) - Cam control (Balluff) - Control cabinet with touchscreen - Height-adjustable table - Foot switch

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1994, The press brake was manufactured in 1994. Working length is 1250 mm with a pressing force of 600 kN. Hnjdjp R Ircepfx Af Teg Manufacturer: Micoda Working length: 1250 mm Pressing force: 600 kN Weight: 4000 kg Power: 10 kW