Stroj za točkovno varjenje

DALEX PMS11-4

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Electrode force: 100 daN, welding power: 255 kVA, rated output: 80 kVA, with DALEX DRF 5.2 cooling system. Dksdpfx Aeiknv Eoplel

Stanje: novo, Leto izdelave: 2026, Stroji po meri, prilagojeni vašim proizvodnim potrebam Naši stroji po meri so natančno zasnovani in konstruirani tako, da izpolnijo edinstvene zahteve vaših proizvodnih procesov. Ne glede na to, ali se osredotočate na končno obdelavo, odstranjevanje oksida ali zaobljanje robov, ti stroji zagotavljajo vrhunsko preciznost in zmogljivost. -Končna obdelava: Dosezite gladke, visokokakovostne površine na različnih materialih ter zagotovite stalen, profesionalen in dovršen izgled. -Odstranjevanje oksida: Učinkovito odstranite površinske okside za čisto, brezhibno površino – ključno za nadaljnjo obdelavo ali nanašanje premazov. -Zaobljanje robov: Natančno zaoblite robove po želenem radiju ter tako povečate varnost in končno kakovost vaših izdelkov. -Možnosti prilagoditev Vsak stroj je popolnoma prilagojen vašim zahtevam ter omogoča prilagodljivost pri: Hitrosti obdelave: Nastavljive hitrosti, ki se prilagodijo vašim produkcijskim potrebam. Posebne funkcije: Možnosti vključujejo sisteme za odsesavanje prahu in dima, nastavljive pritiske ter programabilne rešitve za optimizacijo vašega delovnega procesa. Dkodpjhq Dbxofx Apljl Izdelano za vzdržljivost Naši stroji po meri so zasnovani za dolgo življenjsko dobo in zanesljivo delovanje v zahtevnih proizvodnih ciklih. Ne glede na to, ali jih uporabljate za manjše projekte ali visoko industrijsko proizvodnjo, zagotavljajo izjemne rezultate, leto za letom.

Stanje: rabljeno, Leto izdelave: 1960, Technical Details: Power Output: 60 kVA Throat Depth: 680 mm Arm Spacing: 115 / 415 mm Adjustable Jaw Opening: 180 mm Rated Power: 60 kVA Djdpou Nv Emsfx Aplskl Welding Power: 71 kVA Electrode Force: 100 to 600 daN Voltage: 380 V / 50 Hz Air Pressure (min./max.): 6 / 10 bar Cooling Water Consumption: 12 l/min Machine Weight approx.: 685 + 200 kg Supply Voltage: 380 V / 91 A Nominal Power: 60 kVA Connected Load: 54 kVA Dimensions L-W-H approx., Machine: 1,700 x 850 x 1,750 mm Dimensions L-W-H approx., Aggregate: 900 x 650 x 1,000 mm SPOT WELDING MACHINE - WELDING TRANSFORMER Three-phase DC Welding Machine Application: Spot, projection and series spot welding Maximum Short-Circuit Power: 89 kVA Primary Short-Circuit Current: 135 A Secondary Current = Short-Circuit Current: 25 kA, Welding Current max. 20 kA Electrode Stroke max.: 90 mm; Electrode Force min./max.: 100 daN / 600 daN Max. Stroke Rate at 10 mm stroke: 400 strokes/min Spot Armature: Electrode holder Ø 30 mm, adjustable 180 mm, Arm spacing min./max.: 115 / 415 mm Double Foot Switch Cooling unit, mobile – on wheels for portability, output 1.45 kW, pipe connection R 3/4 inch, refrigerant R22

Stanje: dober (rabljeno), Srednjefrekvenčni točkovni varilni stroj 1000 Hz, 400 V 50 Hz Proizvajalec: DALEX Tip: PMS 11-4 MF Izpostava: 950 mm z dvojnim hodom cilindra Nazivna moč pri 20 % ED: 180 kVA Sekundarni kratkostični tok: 37 kA Sekundarna napetost v prostem teku: 9 V Sila elektrode: 60–600 daN Teža: 550 kg Djdpfevyk Sfox Apljkl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, premer struženja nad prečnim suportom: 800 mm, izvrtina vretena: 92 mm, premer struženja: 800 mm, stružna dolžina: 6.000 mm, skupna dolžina: 9.000 mm, skupna širina: 1.900 mm, skupna višina: 2.100 mm, največja hitrost vretena: 1.400 obr/min, hitrost vretena (min.): 14 obr/min, HeidenHain ND-780 mit 3-Achsen-Digitalanzeige X, Zo, Z Dodpevn Svuofx Aplokl HeidenHain LS388C Maßstäbe 2 x CE-Futterabdeckung für 500 & 900 mm SCHUNK 3-Backenfutter Ø 400-102 mm Bison 4-Backenfutter ... Feste Lünette Ø 30 - 210 mm Feste Lünette Ø 210 - 370 mm Spitzenweite: 6000 mm Umlaufdurchmesser über Bett: 800 mm Umlaufdurchmesser über Planschlitten: 520 mm Umlaufdurchmesser im Bettvorsprung: 870 mm Bettvorsprungslänge: 320 mm Spindelbohrung: 92 mm Spindelleistung: 15 kW Bettbreite: 550 mm Spindelaufnahme: 6 Mk Drehzahlbereiche: 14 - 1400 U/min Länge: 9000 mm Breite: 1900 mm Höhe: 2100 mm Gewicht: 7670 kg

Stanje: zelo dobro (rabljeno), 3-phase direct current spot welding machine DALEX Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Electrode force: 100–600 daN Arm reach: 550 mm Dodpfjhmvawsx Apljkl with mounted control cabinet according to VDE 0100 Main switch Synchronous welding controller 8033 Weight: 740 kg

Stanje: zelo dobro (rabljeno), Pneumatically operated, water-cooled 3-phase DC spot welding machine Manufacturer: DALEX Model: PMS 11-4 G3 Throat depth: 650 mm Equipped with a special cylinder for low pressure range from 20–120 daN Rated output at 50% duty cycle: 60 kVA Secondary short-circuit current: 25 kA Dsdpfx Apsu A Dg Eslekl Secondary open-circuit voltage: 3.68 V With auxiliary control cabinet according to VDE 0100 Main disconnect switch Synchronous welding controller 8036 Weight: 685 kg

Leto izdelave: 1990, stanje: rabljeno, številka stroja/vozila: 9072492, Rated power: 100 kVA Reach: 500 mm Electrode arm spacing: 330 - 500 mm Electrical connection: 400 V kW Dkjdpfx Apoz H Dyelsl Required installation space: 700 x 1420 x 2000 mm Weight: 750 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Rated power at 50% duty cycle: 80 kVA Short-circuit current: 45.4 kA Electrode force: 100–600 daN / single stroke Throat depth: 350 mm Djdpfowqmrnjx Aplokl --- Control unit: MPS 100mono (8 cycles, 1 program) Pre-installed upper electrode holder Foot switch Adjustment device, Electronic flow monitor 4-step transformer tap switch and main switch. --- Warranty: 6 months --- Training and commissioning available upon request --- Spot welding electrodes and spare parts available from stock --- For further information, please visit our website

Stanje: zelo dobro (rabljeno), Roll seam welding machine in longitudinal seam design Make: DALEX Model: PMS 11-4 Nl Throat depth: 350 mm Rated power at 50% duty cycle: 80 kVA Secondary short-circuit current: 23 kA Dodpfx Apotxl Ivslekl Secondary open-circuit voltage: 3.5 - 4.26 V with 2-step switch (High/Low range) Electrode force: 80-600 daN with mounted control cabinet according to VDE 0100 Main disconnect switch Synchronous welding control 8036 Weight: 635 kg Sample photo – Machine is still being refurbished

Leto izdelave: 2008, stanje: dober (rabljeno), številka stroja/vozila: 431808, Ref. No. 18177 Hydraulic Flat, Profile, and Bar Shear with Notching Attachment and Punching Unit Technical Data: - Flat Bar Shear cuts up to 375 x 10 mm or 220 x 20 mm - Profile Steel Shear cuts angle steel (L-profile) at 90° up to 130 x 13 mm - Bar Shear cuts round bar up to 45 mm, square bar up to 45 mm - Notching Attachment with square notching tool 100 x 42 x 10 mm - Punching Unit – Punching force: 600 kN – with stop table Dsdpfxjmidyij Apljkl – Throat depth: 300 mm – Punches holes in steel up to 28 mm Ø in 15 mm material, or 34 mm Ø in 12 mm material - Manual length stop - Drive: 400 V / 4 kW - Space requirements approx. W 600 x H 1550 x D 1500 mm - Weight approx. 1300 kg

Stanje: zelo dobro (rabljeno), combined spot and projection welding machine Manufacturer: DALEX Model: PMS 11-4 Version "B" Dkedpfxswz Rz Ie Aplsl Throat depth: 350 mm Rated power at 50% duty cycle: 100 kVA Secondary short-circuit current: 59.2 kA Secondary open-circuit voltage: 2.15–4.33 V Electrode force: 190–1140 daN Equipped with 4-step switch Control cabinet mounted according to VDE 0100 With main switch Synchronous welding controller with monitoring function MPS 8043-1 IQ1 Selector switch for operation with dual-hand safety control panel and foot pedal Sample photo Machine currently being overhauled