Projekcijski varilni stroj

Dalex PMS 11-4

Stanje: rabljeno, Leto izdelave: 1960, Technical Details: Power Output: 60 kVA Throat Depth: 680 mm Arm Spacing: 115 / 415 mm Adjustable Jaw Opening: 180 mm Rated Power: 60 kVA Welding Power: 71 kVA Electrode Force: 100 to 600 daN Voltage: 380 V / 50 Hz Todpou Nv Emofx Anped Air Pressure (min./max.): 6 / 10 bar Cooling Water Consumption: 12 l/min Machine Weight approx.: 685 + 200 kg Supply Voltage: 380 V / 91 A Nominal Power: 60 kVA Connected Load: 54 kVA Dimensions L-W-H approx., Machine: 1,700 x 850 x 1,750 mm Dimensions L-W-H approx., Aggregate: 900 x 650 x 1,000 mm SPOT WELDING MACHINE - WELDING TRANSFORMER Three-phase DC Welding Machine Application: Spot, projection and series spot welding Maximum Short-Circuit Power: 89 kVA Primary Short-Circuit Current: 135 A Secondary Current = Short-Circuit Current: 25 kA, Welding Current max. 20 kA Electrode Stroke max.: 90 mm; Electrode Force min./max.: 100 daN / 600 daN Max. Stroke Rate at 10 mm stroke: 400 strokes/min Spot Armature: Electrode holder Ø 30 mm, adjustable 180 mm, Arm spacing min./max.: 115 / 415 mm Double Foot Switch Cooling unit, mobile – on wheels for portability, output 1.45 kW, pipe connection R 3/4 inch, refrigerant R22

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Naprodaj je razstavni stroj Hammer kombinirana skobeljna-debelinka A3-31 z dolžino stola 1400 mm. Stroj je kot nov. Tehnični podatki: - 3-sistemski nožarski valj Tsdjx U U Ekopfx Anped - Širina skobljanja: 310 mm - Dolžina stola: 1400 mm - Največja odprtina: 230 mm - Moč motorja: 3 kW - Priključek za odsesavanje Ø 120 mm - Leto izdelave: 2022 Stroj se nahaja v kraju A-5431 Kuchl in si ga je mogoče ogledati kadarkoli v delovnem času. Sorodni pojmi: skobeljni stroj, debelinka, kombinirani stroj, skobljanje, debelina Referenca: R-A0117

Stanje: zelo dobro (rabljeno), Pneumatically operated, water-cooled 3-phase DC spot welding machine Manufacturer: DALEX Model: PMS 11-4 G3 Throat depth: 650 mm Equipped with a special cylinder for low pressure range from 20–120 daN Tjdou A Dg Espfx Anpsd Rated output at 50% duty cycle: 60 kVA Secondary short-circuit current: 25 kA Secondary open-circuit voltage: 3.68 V With auxiliary control cabinet according to VDE 0100 Main disconnect switch Synchronous welding controller 8036 Weight: 685 kg

Stanje: dober (rabljeno), Srednjefrekvenčni točkovni varilni stroj 1000 Hz, 400 V 50 Hz Proizvajalec: DALEX Tip: PMS 11-4 MF Tedpfx Anovyk Sfjpsd Izpostava: 950 mm z dvojnim hodom cilindra Nazivna moč pri 20 % ED: 180 kVA Sekundarni kratkostični tok: 37 kA Sekundarna napetost v prostem teku: 9 V Sila elektrode: 60–600 daN Teža: 550 kg

Stanje: zelo dobro (rabljeno), High-performance spot welding tongs with double-stroke cylinder Manufacturer: DALEX Model: 3528 - 4 Rated capacity at 50% duty cycle: 63 kVA Secondary short-circuit current: 31 kA Electrode force: 60–730 daN Double-stroke cylinder: long stroke 62 mm, pre-stroke 40 mm Tsdeki Tkpjpfx Anpjd Working stroke with adjustable lift: 0–22 mm Equipped with 5/2-way solenoid valve Cardan suspension and suspension bracket 10 m connection cable with control line Arm reach: 170 mm Arm spacing: 170 mm Complete with 1 pair of electrode arms, straight top and bottom, 170 mm Synchronised welding control MPS 1036 Sample photo

Stanje: zelo dobro (rabljeno), 3-phase direct current spot welding machine DALEX Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Electrode force: 100–600 daN Arm reach: 550 mm Todpfx Anehmvawepod with mounted control cabinet according to VDE 0100 Main switch Synchronous welding controller 8033 Weight: 740 kg

Stanje: zelo dobro (rabljeno), globina grla: 1.100 mm, nazivna moč pri 50-odstotnem delovnem ciklu: 96 kVA, tok kratkega stika: 31.500 A, vhodna napetost: 400 V, vrsta hlajenja: voda, skupna masa: 830 kg, Oprema: Na voljo je tipska ploščica, Spot Welding Machine Type PMS 11-4 G3 in 3-Phase Direct Current Version - specially designed for welding aluminium sheets - minimally used, fully inspected and cleaned - everything functions, ready for demonstration - Rated voltage: 400V/50Hz - Rated power: 96 kVA - Welding current: 23 kA - Connection cable cross-section: 10 mm² per phase - Fuse protection: 63A - Throat depth: 1050 mm (!!) - Electrode arm diameter: 60 mm - Electrode holder diameter: 30 mm - Electrode force: 600 daN - Stroke: 65+25 mm - Electrode taper: MK2 - Control: MPS 8043/1 by Harms & Wende with current increase and pulses - includes operating manual - 2-step foot switch in accordance with UVV - Main machine switch Tjdpfxoh N Sc Ej Anped - Pneumatic maintenance unit - Weight: approx. 830 kg - Complete documentation with wiring diagram, compressed air circuit, and cooling water circuit available - VAT can be shown separately - Delivery from stock Dresden, approx. 4 days within Germany – export may take longer! Commissioning on-site is subject to a fee and will be billed based on actual effort. System is located in Dresden, close to the A17 motorway, and can be inspected and demonstrated by appointment.

Leto izdelave: 1990, stanje: rabljeno, številka stroja/vozila: 9072492, Rated power: 100 kVA Reach: 500 mm Tjdpfx Asz H Dyjnpjd Electrode arm spacing: 330 - 500 mm Electrical connection: 400 V kW Required installation space: 700 x 1420 x 2000 mm Weight: 750 kg

Stanje: novo, Fastech 3-Roller Round Bending Machine FRM 1050 x 90 Technical Specifications: Special features included in price: - Hardened rollers - Motorized rear roller adjustment - Digital display Tsdpfx Aehzq Dbonpsd Sheet width: 1050 mm Sheet thickness: max. 3.3 mm Sheet thickness (pre-bending): 3.0 mm Roller length: 1050 mm Roller diameter: 90 mm Minimum bending diameter: 130 mm Weight: 475 kg Dimensions (L x W x H): 1750 x 800 x 1130 mm Motor: 1.1 kW Equipment: - Upper and lower rollers electrically driven - Swing-out upper roller - Device for conical bending - Asymmetric roller arrangement - Self-braking main motor - Separate control and operator panel - Safety rope Values apply for St-37 / 240 N/mm² CE marking

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, stiskalna sila: 160 t, Hidrobrasil Double-Column Press – 160 t – 1,500 × 600 mm – Stroke 500 mm For sale is a hydraulic double-column press from Hidrobrasil with a pressing force of 160 t. This twin-cylinder press is specifically designed for insertion work and small series production, featuring a robust construction and precisely adjustable pressing parameters. Thanks to its compact design and flexible table adjustment, it is ideally suited for a wide range of production applications. ===== Technical Data & Information: Hydraulic Double-Column Press – 160 t ==== General Data - Manufacturer: Hidrobrasil - Model: Double-Column Press - Design: Double-Column / Twin-Cylinder Press - Machine Type: Small-Series Press - Pressing Force: 160 t (at 250 bar) - Year of manufacture: 12/2020 - Machine weight: approx. 4,200 kg - Overall height: approx. 2,800 mm ==== Working Area - Open height: 700 mm - Stroke: 500 mm ==== Table & Ram - Table size: 1,500 × 600 × 100 mm (height adjustable) - Ram plate: 1,500 × 600 × 100 mm - Optionally: 1,600 × 600 × 100 mm - T-slots: per customer specification ==== Speeds - Downstroke speed (idle): 9.8 mm/s - Return speed: 15 mm/s ==== Hydraulics & Drive - Motor power: 11 kW - Pump output: 22 l/min - Oil tank volume: approx. 200 l - Pressure adjustment: approx. 30–160 t via rotary controller ==== Control & Operation - Travel limit via cam switch - Two-hand operation - Adjustable stroke travel ==== Equipment - Height-adjustable table - Paint finish: RAL 5005 (Royal Blue) or per customer request - Ram plate in safety colour (RAL 2009 or RAL 1023) - Assembly, commissioning and operator training optional ===== Todpfxjgz H Dhe Anpjd Insertion work, assembly processes, small series production, forming technology, workshop applications Hydraulic press, double-column press, twin-cylinder press, insertion press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a custom quote. Our hydraulic presses are manufactured in compliance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety standards as they comply fully with the national Brazilian safety guideline NR 12, which builds upon these standards. Our main strengths are special-purpose machine construction and press automation. We offer customised hydraulic presses at surprisingly competitive prices. For the hydraulic systems, we predominantly use components from leading European manufacturers.