Ekscentrični pritisk - enojni stolpec

HELMERDING ERVL 50 B

Leto izdelave: 1962, Stanje: rabljeno, številka stroja/vozila: 1790, Manufacturer: Karl Klink Model: RW 5 Year of manufacture: 1962 Weight: approx. 2,500 kg Machine no.: 1790 General / Technical Data: Hydraulic horizontal broaching machine in good, operational condition Broaching stroke: 1,320 mm Broaching stations: 1 unit Tensile force: 5,000 kg at 3 m/min (3,000 kg at 7 m/min) Broaching tool clamping: Universal draw head for flat shanks Through-bore in clamping table: Ø 100 mm Workpiece diameter: max. 420 mm (limited by the oil and chip tray) Cutting speed: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,600 mm x 600 mm x 1,900 mm (without work area) Power supply: 380 Volt / 50 Hz / 15A Hydraulic motor: 4 kW Accessories / Special equipment: • The machine is equipped with a universal draw head for flat shank tools • Coolant/lubrication system • No automatic tool loader included • Short oil and chip tray (approx. 900 mm) Remarks: Ndsdpfjdl Uzkex Agcsd The machine is ideal for producing keyways. Broaching needles and broaching arbors can be supplied on request. The machine is available for demonstration under power in our warehouse.

Leto izdelave: 1990, Stanje: rabljeno, Pressure: 75 t Outreach: 300 mm Stroke: 8 – 110 mm Table surface: 750 x 600 mm Ram adjustment: 75 mm Ram surface: 430 x 230 mm Through-hole in table: 250 x 150 mm Pin hole in ram: 40 mm Stroke rate: 60 + 90 strokes/min Machine weight: approx. 4.4 t Total power requirement: 4.5 – 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram with stroke down, ram down: 19 mm Distance table/ram with stroke up, ram up: 380 mm Equipment: - With hydraulic clutch-brake combination, new hydraulics and oil cooler - With gear train in oil bath - Fixed table prepared for mounting of tool change consoles - 2 roller strips in the table - Mechanical overload protection in ram (shear plate) The following works are carried out on the machine / Partial overhaul: - Machine completely disassembled, inspected, seals replaced, defective parts exchanged, etc. - Machine repainted - New Balluff cam switch - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication system Ndsdpod Nl E Usfx Agced - New control cabinet with touch panel and ABB safety control - Current UVV safety inspection with brake time measurement

Stanje: dober (rabljeno), Leto izdelave: 2007, Gildemeister Lathe NEF 600 Year of manufacture: 2007 Control: Heidenhain Plus Max. turning diameter: 600 mm Distance between centers: 1,250 mm Swing diameter over bed: 600 mm Cross travel: 320 mm Main spindle: Speed range – main spindle: max. 3,000 rpm Spindle bore: 90 mm Chuck diameter: 320 mm Tool turret: Number of tool positions: 8 stations Total connected load: 42 kVA Nodpfxeucl Alo Agcjdd Machine weight: approx. 5.0 t Space requirements: approx. 3.6 x 2.14 x 1.95 m Accessories: coolant gun, Schunk chuck 315 mm, tailstock MK 5

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), Parts Cleaning Machine / Spray Cleaning System Type L102 Automatically operating hot water parts washing machine with basket drive via geared motor, equipped with 2 stainless steel wash pumps (manufacturer: Lowara), and 2 rotating three-sided spray systems. - Basket diameter: 910 mm - Usable height: 520 mm - Max. load weight: 200 kg Njdpfxjhymmgj Agcjdd - Spray pressure: 2x 3 bar - Tank volume: 175 liters - Heating: electrically adjustable (RT - 90°C) System dimensions (LxWxH): 1,300 x 1,250 x 1,990h mm Net weight: approx. 300 kg Freely adjustable wash timer (minutes and hours) Entire cleaning machine (internal components and external cladding) constructed from stainless steel 1.4301 Water circulation system and loading basket made from stainless steel 1.4301 Bath cover with fine filter (2,000 micron) 2 intake filters for pump protection Steam vapor extraction including condensate return This is a showroom machine from the Glogar Technology Center.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Vertical Broaching Machine VADARI GmbH Type SRM 2026 - 60 kN - New Machine - BROACHING MACHINES MADE IN GERMANY Currently available with special conditions! ==> ==> Information for manufacturers or dealers with in-house production: Drawings, rights, spare parts, customer and lead data, planning and production documentation (including plans for a variant with 9 tons pulling force) for the broaching machine can be acquired from us if required. If interested, please contact us. ==> Our new machines are made to order according to customer specifications. Short production and delivery times are possible. ==> Currently, spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are available for immediate delivery. Cost-effective and extremely robust vertical broaching machine for long-term use. Broaching tools (including special pins for internal spline cutting, etc.) and accessories are available on request. Please inquire separately regarding these. Our broaching machine can also be used with all broaching tools and holders from other manufacturers! Complete production and assembly take place in our factory in Germany. Delivery possible at short notice by arrangement. Furthermore, we offer replacement and wear parts for Wolff and VADARI SRM broaching machines (spindles, spindle nuts, motors, gears, as well as all other necessary components—incl. electrics). Vertical Broaching Machine Type SRM 2026 – NEW MACHINE: The primary application is the production of keyways with widths from 3-28 mm and similarly sized profiles. Due to its compact design and small footprint, the machine can be successfully used in small, medium, and large workshops. The low price justifies the investment even for small series and one-off production. Drive is via a pole-changeable geared brake motor. The maintenance-free double spindle drive ensures smooth operation, central pulling point, and consistent cutting performance. The open tool table allows large workpieces to be easily accommodated. In most cases, it is not necessary to clamp the workpieces tightly. Stroke adjustment is achieved via adjustable limit switches with stroke limitation. For short hubs/workpieces, several items can be stacked and machined simultaneously. Broaching needles, push rods, and spare parts available on request at favorable conditions. Technical Data: Pulling force: 60 kN at 3 m/min, 40 kN at 6 m/min Broaching speed: 3 m/min and 6 m/min (Optionally available with stepless speed adjustment from 0–6 m/min via enhanced electronics) Return speed: 6 m/min Stroke: 1050 mm Broaching tool length: 1200 mm Ndodpfouqbnhox Agcjd Workpiece diameter: unlimited Work table: 450 x 350 mm Table opening: 140 mm Weight: approx. 510 kg Floor space: 750 x 570 mm Overall machine height: 1510 mm Drive power: 3.7 / 4.4 kW Electrical equipment: 400/230 Volt, 50 Hz Control voltage: 230 Volt Operating voltage: 400 Volt, 50 Hz Paint finish: Exterior RAL 7035/7036/7016, Interior RAL 3000 or customized Safety door: Standard equipment Coolant device: Standard equipment The machine conforms to the current Machinery Directive and bears the CE mark.

Stanje: zelo dobro (rabljeno), The SB-10 grinding machine enables flawless grinding of boring bars, thread-cutting tools, parting-off tools, or boring bar steels made of HSS or carbide for jig boring machines or lathes. By selecting the correct rake angle to suit the respective material, you achieve optimum utilization and a longer service life of the tools. These boring bars are still mostly ground by hand today and are subsequently used on high-quality machine tools. On the SB-10, the steels are ground using a profiled grinding wheel at the circumference. The desired profile is achieved effortlessly with a dressing diamond and the template mounted on the machine. For excellent stability and surface quality, the horizontal carriage is mounted on cross-roller guideways. Grinding wheel (ØxWxB): 125 x 20 x 20 mm Speed: 2800 rpm Longitudinal adjustment: 130 mm Transverse adjustment: 80 mm Ndsdpfx Ajfqicxsgced Height adjustment: 65 mm Rake angle: +25° to -10° Dimensions (W x D x H): approx. 550 x 450 x 650 mm Weight: approx. 70 kg

Stanje: novo, The bSander 75.200 & 150.200 are machine grinders designed for grinding pipe ends and profile ends, as well as for edge grinding and surface grinding on the top side of the unit. bSander 150.200: Belt dimensions: 150 x 2000 mm Belt speed: 29 m/s Drive power: 4.0 kW // 3x400 V // 50Hz Dimensions (L x W x H): 700 x 530 x 1130 mm Weight: 90 kg bSander 75.200: Belt dimensions: 2000 x 75 mm Belt speed: 29 m/s Drive power: 3.0 kW // 3x400 V // 50 Hz Ndoded Dp Aajpfx Agcsd Dimensions (L x W x H): 700 x 490 x 1130 mm Weight: 72 kg Price on request

Leto izdelave: 1985, Stanje: dober (rabljeno), številka stroja/vozila: 04.2187, Hydraulic Internal Broaching Machine in Good Working Condition Manufacturer: Arthur Klink Nodjixntwjpfx Agcsdd Year of Manufacture: 1985, refurbished Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Tensile Force: 10,000 kg at 3 m/min Broaching Speeds: hydraulically variable from 1 m/min to 7 m/min Return Speed: hydraulically variable from 7 m/min to 30 m/min Maximum Stroke: 1200 mm Broaching Tool Clamping: universal pull head for flat shanks up to 26 mm width Maximum Workpiece Diameter: Ø max. 480 mm (limited by oil and chip tray) Table Bore: Ø 70 mm Power Supply: 380 Volt / 50 Hz / 5 kW

Leto izdelave: 1978, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Pulling force: 6.3 t Broaching speeds: hydraulically variable from 1 m/min to 7 m/min Return stroke speed: hydraulically variable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Ndsdpoiw Dlkjfx Agcod Accessories / Special Equipment: - Coolant / lubricant system - Without tool feeder - Oil and chip tray (approx. 2,000 mm) Remarks: The machine is ideal for the production of keyways. Upon request, broaching tools and arbors can be supplied. The machine is available for demonstration under power in our warehouse.

Stanje: novo, Hydraulic combined ironworker with two independent pistons, punching station with mechanical back gauge and adjustable piston stroke, notching, shearing of flat bars, round bars, and profiles with adjustable back gauge and automatic shear control, dual foot pedal, centralized lubrication system, working light. The machine is supplied with safety guards in compliance with CE regulations, CE conformity declaration, and operating manual. Applied force: 85 tons Motor power: 7.5 kW Dimensions: 1,920 x 950 x 2,040 mm (L x W x H) Weight: 2,315 kg PUNCHING: Ndsdpfjggbt Sjx Agcsd Punching capacity: Ø 33 mm x 20 mm thickness Throat depth: 355 mm Punch stroke: 80 mm Working height: 1,080 mm SHEARING: Flat bars: 380 x 20 mm 480 x 15 mm Blade length: 482 mm Round bars: Ø 50 mm Square bars: 50 mm 90° angle profiles: 150 x 150 x 15 mm 45° angle profiles: 80 x 8 mm NOTCHING: Max thickness: 13 mm Width: 52 mm Depth: 100 mm Working height: 940 mm