Weiler Matador Vs1 nakup rabljenega (203)

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout (NEW) Geometrically overhauled with an acceptance report certifying tolerances compliant with new machine standards. Technical Data: Redpfewrm Dtox Aafoch >> Machine No.: 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock Morse Taper: MK 3 >> Feeds: 0.015 to 0.46 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle Brake (switchable) >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Accessories: >> 3-axis digital readout from K&C (new), 12 months manufacturer's warranty, operating manual included Functions: mm/inch selection, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, selectable counting direction >> NEW collet chuck, NEW collet set 3–26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws (NEW) >> Multifix (Quick-Change Toolpost) Size B (NEW) with 3 tool holders >> Bed stop >> Electrical chuck guard (NEW) >> Rear splash guard >> Operating manual >> Coolant system >> Machine levelling feet About the Machine: A Weiler Condor 81 lead and feed screw lathe is being offered in excellent, geometrically overhauled condition. The slides have been newly ground or hand-scraped. Delivered with an inspection protocol. The accessories, collets, and chuck are all new. For safety: The machine is equipped with a braking motor, electronic spindle guard, and two emergency-stop buttons—a lathe in as-new condition. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and capable of producing surfaces comparable to grinding. Take the opportunity to view and test the machine under power on site to convince yourself of its condition.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Ta stružnica Weiler Commodor prihaja iz tehnične šole, zato ima malo delovnih ur. Lahko uporabljena in ni bila močno obremenjena – čista, zanesljiva naprava z dolgo življenjsko dobo. Rcedpfjw U Sx Hox Aafoh Dolžina struženja: 1.000 mm. Premer struženja nad ležiščem: 380 mm. Premer struženja nad prečnim suportom: 190 mm. Število vrtljajev vretena: 25 – 2.000 min⁻¹. Število stopenj hitrosti: 18. Premer vretenaste luknje: Ø 56,0 mm. Vretenov konus: MK DIN 228 / MK 4. Vretenova prirobnica: DIN 55027 / velikost 6. Pomik rezkalne glave: 150 mm. Širina ležišča: 310 mm. Podaljšano podajanje – vzdolžno: 0,022 – 0,8 mm/obrat. Podaljšano podajanje – prečno: 0,011 – 0,4 mm/obrat. Napetost: 380 V. Skupna potrebna moč: 7,5 kW.

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Na prodaj je robusten in natančen cikelni stružnica WEILER E90 x 4500, letnik 1999, z velikim premerom vrtenja in cikličnim krmiljenjem – idealna za težke obdelovance do 6000 kg. Stroj je tehnično v dobrem stanju in je bil nazadnje v industrijski uporabi. Odličen je za posamično in maloserijsko proizvodnjo velikih komponent. Stroj ima ciklično krmiljenje, stabilno luneto in konjiček z velikim hodom pinole. Rcodow Idx Sjpfx Aafsh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Swing diameter: 330 mm Turning length: 750 mm Control: WEILER D 1 Centre height: 165 mm Centre distance: 750 mm Maximum swing diameter over cross slide: 160 mm Spindle bore: 42 mm Spindle speeds: 1 - 4,500 rpm Spindle nose: DIN 55027 size 5 Cross slide travel: 180 mm Feed rates X-axis: mm/rev Feed rates Z-axis: mm/rev Rapid traverse X-axis: 5 m/min Rapid traverse Z-axis: 10 m/min Rcsdpewi Ugqsfx Aafjh Feed force X/Z-axis: 3,000 / 6,000 N Tailstock taper: MT 3 Tailstock quill diameter: 50 mm Tailstock quill stroke: 110 mm Total power requirement: 10 kW Machine weight approx.: 1.3 t Machine dimensions (L x W x H): 1.8 x 1.2 x 1.7 m Accessories: SCHUNK 3-jaw chuck 0 mmø, quick-change toolholder, coolant system

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 120160, stružna dolžina: 925 mm, premer struženja: 480 mm, skupna višina: 1.990 mm, skupna dolžina: 3.350 mm, skupna širina: 1.800 mm, moč: 0,032 kW (0,04 KM), Oprema: dokumentacija / priročnik,

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Universal lead and feed screw lathe Rcjdpfx Aaeg R S Rcofoh Manufacturer: WEILER Model: Condor B Year of manufacture: 1989 - overhauled newly painted, RAL 7035 light grey Machine no.: 1401 with warranty Includes: - 3-axis digital readout FAGOR Innova 30i T, new - Chuck guard with electrical interlock, new - Quick-change tool post base unit, size B - Bed stop - Coolant system - Chip backsplash - Operating manual -Used, as seen-

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Engine Lathe Model Condor B, Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout NEW Geometrically overhauled with inspection protocol for new machine tolerances! Technical Data: >> Machine No. 90-1495 >> Center height: 165 mm >> Center distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Features: >> New K&C 3-axis digital readout, 12 months manufacturer's warranty with operation manual Functions: switching mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments >> 160 mm three-jaw chuck with 2 sets of jaws, NEW >> Multifix quick-change toolpost, size A, with 2 tool holders, NEW >> Bed stop >> Electric chuck guard NEW >> LED machine lamp NEW Rcodpfxsvambcs Aafeh >> Rear safety cover >> Operating manual >> Coolant system >> Machine feet About the machine: For sale is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, like-new condition. All guides have been newly ground or hand-scraped. Delivered with a test protocol upon acceptance. This is an excellent machine with electronic spindle protection. All accessories such as collets, chuck, and Multifix toolpost are new. Spindles, spindle nuts, bearings, belts, and wipers have been replaced. Take the opportunity to inspect this machine under power at our site and convince yourself of its condition.

Stanje: dober (rabljeno), Lead and feed screw lathe Weiler Condor VS 2 Technical Data: Centre height: 160 mm Centre distance: 800 mm Spindle bore: 40 mm Bed width: 240 mm Spindle speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock taper: MT 3 Quill stroke: 110 mm Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (W x D x H), approx.: 1930 x 880 x 1470 mm Equipment: 3-jaw chuck Quick-change toolpost system Multifix size A incl. 1 toolholder Electrically interlocked chuck guard Retrofitted brake motor Bed stop Emergency stop button Coolant system Machine lamp Chip guard at rear ELESTA 3-axis digital readout Rotating centre The machine has been technically inspected and is in very good condition. Backlash on cross slide: 0.2 mm Backlash on top slide: 0.15 mm Inspection under power possible at any time. Rjdpfx Aeu E H Iwsafoch Price net, ex-works, loaded from stock

Stanje: novo, Praktikant VC plus The new standard in conventional precision lathes. High-quality, energy-efficient, precise, and universally deployable for production, training, and further education. This machine stands out with: forward-looking technology maximum precision durability operator-friendly ergonomics minimal footprint and a wide range of accessories. The consistent and innovative further development of the proven Praktikant series offers an economical and intelligent solution for your daily applications. Technical Data: WORK AREA Center height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Distance between centers: 650 mm SPINDLE Spindle nose DIN 55027/DIN ISO 702-3: Size 5 Spindle bore: 43 mm Front bearing diameter: 70 mm MAIN DRIVE Rcsdpshw N Ntofx Aafoh Drive power 60%/100% duty cycle: – / 8 kW Speed range: 25 – 5,000 rpm Number of speeds: stepless FEED RANGE Number: stepless Longitudinal: 0.01 – 6 mm/rev Cross: 0.003 – 2 mm/rev THREAD CUTTING RANGE Metric threads: 0.1 – 20 mm TAILSTOCK Quill diameter: 40 mm Quill travel: 85 mm Internal taper DIN 228: MK 3 ACCEPTANCE ACCURACY: DIN 8605 Equipped with WEILER display WTS 15 VC plus - Large, clear 15" touchscreen, rotatable and swiveling, 1366 x 768 resolution - Change control screens via swipe gestures - All functions accessible via app manager - Control panels can be configured, placed, and scaled freely - Import drawings / sketches from PDF via USB interface, individually zoomable - Video-assisted machine maintenance - Context help menu (instead of WEILER VC plus display) - Coolant system 18 liters incl. coolant pump The machine is available for immediate delivery and can be inspected in our showroom in 71334 Waiblingen-Beinstein. For details on equipment, please contact us.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 40 mm, višina središča: 140 mm, stružna dolžina: 500 mm, največja hitrost vretena: 4.000 obr/min, hitrost vretena (min.): 30 obr/min, največja hitrost vrtenja: 4.000 obr/min, vrtljajska hitrost (min.): 30 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Distance between centres: 500 mm Centre height: 140 mm Spindle bore: 40 mm Spindle speed: 30 - 4000 rpm Weight: approx. 800 kg Dimensions: approx. 1430 x 935 x 1550 mm Accessories: operation manual, lamp, Multifix tool holder, collet chuck device (at extra charge) Further accessories available on request Rsdjvnr E Nopfx Aafjch

Stanje: rabljeno, Leto izdelave: 2008, Swing diameter: 720 mm Turning length: 3000 mm Centre height: 360 mm Spindle bore: 106 mm Speed range: 1 - 1800 rpm Tailstock quill taper: MT 6 Max. workpiece weight: 3,800 kg Total power requirement: 36 kW Rodpfx Aajw A Sqmsfech Machine weight approx.: 6,100 kg Space requirement approx.: 4,800 x 2,450 x 2,000 mm CNC lathe – cycle-controlled Equipment: - Chip conveyor - Coolant system - 3-jaw chuck Ø630 mm - MULTI-FIX quick change tool post - Live centre - Machine lamp

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Universal lead and feed screw lathe Make: WEILER Model: Primus VC Rcedpsv D Ip Nefx Aafeh Year of manufacture: 2007 - overhauled Newly painted RAL 7035 light grey Machine no.: CK17 Centre height: 140 mm Centre distance: 500 mm Spindle bore: 40 mm with warranty Geometric acceptance test with inspection protocol Accessories: - 3-axis digital readout SIEMENS - Chuck guard with electrical interlock - Braked drive motor - Quick-change tool post, base body size A - Bed stop - Covered lead and feed screw - Chip guard at rear - Removable chip tray - Operating manual - used, as seen -

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe with 2-Axis Heidenhain Digital Readout from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MK 2 >> Feeds: 0.03 to 0.15 mm/rev >> Possible threads: Metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg Rcodpfx Aaeu Afqlsfjh >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> 2-axis digital readout from Heidenhain >> 1 new 125 mm 3-jaw chuck with 2 sets of jaws >> New collet chuck system with brand new collets, range from 3 mm up to 25 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Rear splash guard About the machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for ground-like surface finishes. Take the opportunity to view this machine on-site under power and see its condition for yourself.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Centre distance: 650 mm Centre height: 160 mm Spindle bore: 40 mm Speed range: 48 – 2,500 rpm Tailstock: MT 3 Drive power: 2.4 / 3 kW Weight: 680 kg Dimensions: 1,600 x 750 x 1,290 mm Paint finish: RAL 6011 (reseda green) Digital readout: 3-axis Fagor Accessories: Additional accessories available on request! We are also pleased to offer you this machine fully reconditioned! Rcsdewc Sh Ejpfx Aafoh

Stanje: rabljeno, Swing over bed: 250 mm Swing over cross slide: . mm Distance between centers: approx. 400 mm Center height: approx. 125 mm Speed range: 80 - 3000 rpm Number of speed steps: 18 Spindle bore: 24 mm Tailstock quill taper: MT 3 Weight: approx. 400 kg Dimensions: approx. 1200 x 650 x 1300 mm Four-jaw chuck diameter: 125 mm Including Röhm four-jaw chuck, Ø 125 mm, with drilling and turning jaws; Rcsdpswa Dz Esfx Aafjh Collet chuck with collets 1-20 mm in 1 mm increments; Multifix size A with 3 tool holders; Chuck guard with safety interlock

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 40 mm, višina središča: 160 mm, stružna dolžina: 650 mm, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 20 obr/min, največja hitrost vrtenja: 3.000 obr/min, vrtljajska hitrost (min.): 20 obr/min, skupna masa: 800 kg, nosilec vretena: MK 3, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Availability: on request Centre height: 160 mm Centre distance: 650 mm Spindle bore: Ø 40 mm Spindle speed: 20–3000 rpm, stepless Tailstock taper: MT3 Quill travel: 85 mm Rcodpfxjvnrzqs Aafjh Longitudinal feed range: 0.020 – 0.630 mm/rev Cross feed range: 0.006 – 0.200 mm/rev Possible thread types: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.58 x 0.9 x 1.5 m (L x H x W) Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, 3-jaw chuck, and further accessories available on request...

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, Lead and Feed Screw Lathe Weiler Condor 81 *Partially Refurbished* Item number: 04-03-141 Manufacturer: Weiler Very good overall condition Machine partially overhauled Delivery time: on request - Subject to prior sale Year of manufacture: approx. 1986 L x W x H: approx. 2000 x 1000 x 1700 mm Weight: approx. 900 kg Digital display: 3-axis digital readout Sino *New* Specifications: Max. turning diameter over bed: approx. Ø340 mm Max. turning diameter over cross slide: approx. Ø185 mm Max. turning length: approx. 800 mm Bar capacity: approx. Ø42 mm Spindle: Speed range: approx. 30–2800 rpm Spindle nose: A 2-5 Drive power: approx. 3.0 kW Rcjdpfxswl At Ds Aafsh Automatic longitudinal & cross feeds: Feed range: approx. 0.016–0.50 mm/rev Suitable for threads: Metric 0.18–28 mm Inch 80–1 TPI Diametral pitch threads 200–2 3/4 DP Module 0.1–9 Tailstock: MT3 Accessories: 3-axis digital readout SINO *New* 3-jaw chuck 160 mm *New* Quick-change toolpost size E + 1 insert Bed stop Work lamp *New* Coolant system *New* Complete documentation Emergency stop Various chuck keys Machine feet Electrically interlocked chuck guard *New* Leadscrew and feed screw cover *New* Drill chuck *Optional* Live center *Optional* Additional quick-change toolposts *Optional* Further accessories on request Price and additional technical data on request

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1990, Universal lead and feed screw lathe Manufacturer: WEILER Model: Praktikant 160 B Year of manufacture: 1990 - overhauled newly painted RAL 7035 light grey Machine no.: 90-160-2054 Redpohy Tdyefx Aafsch Centre height: 160 mm Centre distance: 650 mm Geometric inspection with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i T - Covered lead and feed screw - Braked drive motor - Coolant device - Electrically interlocked chuck guard - Quick-change tool post, size A - Simple bed stop - Chip guard rear panel - Operating manual With warranty Used, as seen The machine is technically compliant with the state of the art at the time of manufacture.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2013, obratovalne ure: 2.100 h, premer struženja nad prečnim suportom: 200 mm, izvrtina vretena: 66 mm, premer struženja nad ležiščem sani: 435 mm, višina središča: 217 mm, stružna dolžina: 1.000 mm, skupna dolžina: 3.061 mm, največja hitrost vretena: 3.500 obr/min, hitrost vretena (min.): 1 obr/min, širina postelje: 202 mm, Za prodajo: precizni stružnica WEILER E40 – zgolj 2100 ur obratovanja, stanje stroja kot novo. Ima 435 mm premera obratovanja nad posteljo, 200 mm nad prečnim suportom, 66 mm vreteno izvrtine in 1000 mm dolžino struženja. Idealna izbira za delavnice, ki zahtevajo natančnost in vzdržljivost. Kontaktirajte nas za ceno in podrobnosti! Rcsdpfjv A Irzjx Aafoh

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Centre distance: 450 mm Centre height: 120 mm Spindle bore: 23 mm Speed range: 30 – 3000 rpm Tailstock: MT 2 Rsdpfx Ajwcxf Doafech Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint finish: Reseda green RAL 6011. Digital readout: Available on request at extra cost Accessories: Further accessories available on request! We are also pleased to offer this machine fully reconditioned!

Stanje: dober (rabljeno), Distance between centres: 800 mm Spindle bore: 38 mm Centre height: 165 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 170 mm Spindle speed: 24–2800 rpm Rcodpfxoukrtno Aafeh Dimensions: 1600 mm x 600 mm x 1250 mm Weight: 850 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, Lead and Feed Screw Lathe Weiler Commodor *Partially Overhauled* Item Number: 04-03-117 Manufacturer: Weiler Very good overall condition Machine partially overhauled Delivery time: on request – subject to prior sale Year of manufacture: approx. 1991 L x W x H: approx. 2200x1200x1800mm Rcjdpfx Aaewf Dhpjfeh Weight: approx. 1500kg Digital readout: 3-axis digital readout Sino *New* Specifications: Max. turning diameter over bed: approx. Ø380mm Max. turning diameter over carriage: approx. Ø190mm Max. turning length: approx. 1000mm Bar capacity: approx. Ø56mm Spindle: Speed range: approx. 25–2000 rpm Spindle nose: A 2-6 Drive power: approx. 4.0kW Automatic longitudinal & facing feeds: Feed range: approx. 0.011–0.80 mm/rev Suitable for threads: Metric 0.30–10mm, Inch 80–2 3/4 G/'' Diametral pitch threads 80–5.5 Dp, Module 0.2–5 Tailstock: MT4 Accessories: 3-axis digital readout SINO *New* 3-jaw chuck 200mm *New* Quick-change toolholder size B + 1 insert Bed stop Work lamp *New* Coolant system *New* Complete documentation Emergency stop Various chuck keys Machine mounts Electrical chuck guard *New* Lead and feed screw cover *New* Drill chuck *Optional* Live center *Optional* Collet device 173E *Optional* Collet set 173E *Optional* Additional quick-change toolholders *Optional* Further accessories on request Price and further technical data on request

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1974, Universal lead and feed screw lathe Make: WEILER Model: Commodor Year of manufacture: 1974 – overhauled Newly painted RAL 7035 light grey Machine No.: 0068 Centre height: 180 mm Distance between centres: 1000 mm Spindle bore: 56 mm With warranty Redpfx Aajmgaddefjch Geometric acceptance with test protocol Accessories: - New FAGOR Innova 30i-T 3-axis digital readout - Chuck guard with electrical interlock - Quick-change tool post, size B - Simple bed stop - Coolant system - Operating manual - Used, as seen -

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, Leadscrew and Feed Rod Lathe Weiler Commodor *Partially Refurbished* Item number: 04-03-111 Manufacturer: Weiler Very good overall condition Machine partially refurbished Delivery time: on request – subject to prior sale Year of manufacture: approx. 1991 L x W x H: approx. 2200 x 1200 x 1800 mm Weight: approx. 1500 kg Digital readout: 3-axis digital readout Sino *new* Specifications: Max. turning diameter over bed: approx. Ø380 mm Max. turning diameter over cross slide: approx. Ø190 mm Max. turning length: approx. 1000 mm Bar capacity: approx. Ø56 mm Spindle: Speed range: approx. 25–2000 rpm Rjdpfx Aasvkv Iyjfjch Spindle nose: A 2-6 Drive power: approx. 4.0 kW Automatic longitudinal & face feeds: Feed range: approx. 0.011–0.80 mm/rev Suitable for threading: Metric 0.30–10 mm Inch 80–2 3/4 G/'' Diametral pitch threads 80–5.5 Dp Module 0.2–5 Tailstock: MT4 Accessories: 3-axis digital readout SINO *new* 3-jaw chuck 200 mm *new* Quick-change tool post size B + 1 insert Bed stop Work lamp *new* Coolant system *new* Complete documentation Emergency stop Various chuck keys Electric chuck guard *new* Drill chuck *optional* Live center *optional* Leadscrew and feed rod cover *optional* Collet device 173E *optional* Collet set 173E *optional* Additional quick-change tool holders *optional* Further accessories on request Price and further technical data on request

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, Lead and Feed Screw Lathe Weiler Praktikant 160 *Partially Refurbished Item number: 04-03-218 Manufacturer: Weiler Delivery time: on request Very good overall condition Machine partially refurbished Delivery time: on request – subject to prior sale Year of manufacture: approx. 1993 L x W x H: approx. 1700 x 1000 x 1700 mm Weight: approx. 650 kg Digital readout: 3-axis Sino DRO *New* Rjdpohd Uubofx Aafoch Specifications: Max. turning diameter over bed: approx. Ø320 mm Max. turning diameter over cross slide: approx. Ø198 mm Max. turning length: approx. 650 mm Bar capacity: approx. Ø40 mm Spindle: Speed range: approx. 96–2500 rpm Spindle nose: A 2-5 Drive power: approx. 2.2 kW Automatic longitudinal and cross feeds: Feed range: approx. 0.007–0.63 mm/rev Thread cutting capability: Metric: 0.25–8 mm, Inch: 80–2 TPI Diametral pitch threads: 200–5 DP, Module: 0.2–4 Tailstock: MT 3 Accessories: 3-axis SINO digital readout *New* 160 mm 3-jaw chuck *New* Quick-change tool post size A + 1 insert Bed stop Work lamp *New* Coolant system *New* Complete documentation Emergency stop Various chuck keys Machine feet Electrical chuck guard *New* Lead and feed screw cover Drill chuck *Optional* Live center *Optional* Collet chuck 386E *Optional* Collet set 386E *Optional* Additional quick-change tool posts *Optional* Further accessories on request Price and further technical data on request