Weiler Primus Vc nakup rabljenega (180)

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Stružnica Weiler Primus VC, letnik 1999, z 3-osnim digitalnim prikazovalnikom Siemens, trizajčnim vpenjalom, Multifixom, zadnjo zaščito proti pršenju in električno zaščito vpenjala. Stroj je v dobrem, delujočem stanju, po dogovoru možen prikaz v obratovanju. Ijdpjx Afvgofx Ah Ajtr

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Weiler Primus VC Precision Centre Lathe 3-Axis Digital Readout K&C NEW with VC Drive, Infinitely Variable Speed and CE. Very Good Condition Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4000 rpm, infinitely variable >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 Size 5 with bayonet lock >> Tailstock: MT3 >> Feeds from 0.02 to 0.63 mm/rev >> Available threads: metric, imperial, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be engaged >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Equipment and Accessories: >> 3-axis digital readout K&C NEW >> Collet device with collets 3 to 26 mm, new, incremented by 1 mm, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> Electronic chip guard Ijdpfx Asw Idlleh Ajtr >> Machine feet >> Splash guard About the Machine: For sale is a Weiler Primus VC lead and feed screw lathe, year 2003, in very good original condition. An excellent lathe with VC drive and infinitely variable speed control of the main spindle. The digital readout and scales from K&C are new. This newer generation of Weiler lathes is user-friendly and allows for producing surface finishes comparable to grinding. The K&C digital readout further simplifies and improves accuracy of operation. You are welcome to inspect the machine powered up at our premises and convince yourself of its condition.

Stanje: rabljeno, Leto izdelave: 1999, Turning diameter 150 mm Turning length 500 mm Total power requirement 4 kW Machine weight approx. 0.8 t O F F E R We can offer you the following ex-stock, subject to prior sale and errors: W E I L E R LZS - Universal Lathe with Digital Readout Model: PRIMUS VC Year of manufacture: 1999 _____ Centre height 140 mm Max. turning diameter over cross slide 150 mm Max. swing over bed 280 mm Distance between centres 500 mm Spindle bore 40 mm Infinitely variable speed 30 - 4,000 rpm 24 longitudinal feeds 0.02 - 0.63 mm/rev 24 facing feeds (longitudinal feeds x 8) 0.006 - mm/rev Metric threads mm/pitch Inch threads 80 - 2 TPI Itsdpfx Ahevm Dv De Aor Module threads module Spindle drive 1.5 kW Total drive 4 kW - 380 V - 50 Hz Weight 800 kg Accessories / Special Equipment • SIEMENS 3-axis digital readout with X-axis, Z-axis, and additional Z-axis (compound slide) • Multifix-A tool quick-change holder • Equipped with a WEILER 3-jaw chuck, 140 mm diameter, mounted • Machine base for tool storage with integrated control cabinet, coolant system • Operating manuals Condition : very good – ready for demonstration Ideal for training workshops Delivery : ex-stock – as inspected Payment : strictly net upon collection – after receipt of invoice We look forward to receiving your order. Further lathes of all sizes in stock – please feel free to enquire.

Stanje: dober (rabljeno), Leto izdelave: 2000, Weiler Primus VC, Year of manufacture: 2000, Digital readout, Centre distance: 500 mm, Max. swing over cross slide: 150 mm, Spindle speed up to 4,000 rpm, Iedsv Ifxispfx Ah Astr Spindle bore: 40 mm, Spindle drive: 1.5 kW, Multifix toolholder, 24 longitudinal feeds, Metric threads, Inch threads,

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Universal lead and feed screw lathe Make: WEILER Model: Primus VC Year of manufacture: 2007 - overhauled Newly painted RAL 7035 light grey Machine no.: CK17 Centre height: 140 mm Centre distance: 500 mm Spindle bore: 40 mm with warranty Geometric acceptance test with inspection protocol Accessories: - 3-axis digital readout SIEMENS - Chuck guard with electrical interlock - Braked drive motor - Quick-change tool post, base body size A - Bed stop Ijdpfjv D Ip Njx Ah Aetr - Covered lead and feed screw - Chip guard at rear - Removable chip tray - Operating manual - used, as seen -

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 40 mm, višina središča: 140 mm, stružna dolžina: 500 mm, največja hitrost vretena: 4.000 obr/min, hitrost vretena (min.): 30 obr/min, največja hitrost vrtenja: 4.000 obr/min, vrtljajska hitrost (min.): 30 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Distance between centres: 500 mm Centre height: 140 mm Spindle bore: 40 mm Spindle speed: 30 - 4000 rpm Weight: approx. 800 kg Dimensions: approx. 1430 x 935 x 1550 mm Ijdpjvnr E Nofx Ah Ajtr Accessories: operation manual, lamp, Multifix tool holder, collet chuck device (at extra charge) Further accessories available on request

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 864, višina središča: 140 mm, širina na sredini: 500 mm, Machine from the insolvency of an automotive supplier – machines are currently still in operation! TECHNICAL DETAILS Digital Display: available Control System: Siemens Sicomp IMC 05 Centre Height: 140 mm Centre Distance: 500 mm Clamping System 3-jaw Chuck: available Quick-change Tool Post: available Tailstock Type: available Further information as per manufacturer – without guarantee Centre Distance: 500 mm Centre Height: 140 mm Swing Diameter over Bed: 280 mm Swing Diameter over Cross Slide: 150 mm Main Spindle Spindle Nose to DIN ISO 702-3: Size 5 Spindle Front Bearing Diameter: 70 mm Spindle Bore: 43 mm Main Spindle Taper Depth: 50 mm Main Drive Drive Power (100% duty cycle): 4 kW Speed Range: 30 – 4,000 rpm Number of Speed Gears: 1 Number of Speed Stages: stepless Feed Drive Number of Feeds: 24 Longitudinal/Cross Feed Range: 0.02 – 0.63 mm/rev / 0.006 – 0.2 mm/rev Thread Cutting Range Metric Threads: 0.25 – 8 mm Inch Threads: 80 – 2 TPI Tailstock Quill Diameter: 40 mm Quill Stroke: 85 mm Quill Taper: MT 3 Machine Dimensions Length x Width x Height: 1,570 x 890 x 1,700 mm Weight: 1,050 kg Itsdev N Inispfx Ah Ajr

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Weiler Primus VC precizni stružnica Leto izdelave: 2011 Tehnične podrobnosti Premer struženja: 250 mm Dolžina struženja: 500 mm Višina konic: 140 mm Premer nad sanmi postelje: 280 mm Maks. premer nad prečnim suportom: 150 mm Glavno vreteno: Območje vrtljajev glavnega vretena: 30 – 4.000 min⁻¹ Moč: 4,0 kW Število prestav: 1 Vpenjalna glava: velikost 5 / DIN 55027 Premer vretena v prednjem ležaju: 70 mm Premer odprtine vretena: 40 mm Uporabni premer prehoda palic: 40 mm Nosilec orodja: Sistem: MultiFix B Presek držala rezila: 20 x 20 mm Konjiček: Hod pinole: 85 mm Premer pinole: 40 mm Stožec konjička: MK 3 Pomiki: Itsdpfxew Ebdbs Ah Aor Število pomikov: 24 Vzdolžni pomik: 0,02 – 0,63 mm/obrat Prečni pomik: 0,006 – 0,2 mm/obrat Narezovanje navojev: Metrski navoj: 0,25 – 8 mm Colni navoj: 80–2 1/” Pomiki osi: X-pomik – prečni suport: 150 mm Z-pomik prečnega suporta: 500 mm Z-pomik zgornjega suporta: 110 mm Skupna priključna moč: 15 kVA Teža stroja: pribl. 800 kg Dimenzije (DxŠxV): 1400 x 935 x 1550 mm Oprema/možnosti: - Dokumentacija - Tridelna vpenjalna glava, premer 160 mm, z čeljustmi - Štiridelna vpenjalna glava, premer 160 mm, z čeljustmi - Vpenjalna glava za vpenjalne puše z vpenjalnimi pušami - Konjiček - MultiFix nosilec orodja z držali - Podporni prislon (luneta) - Menjalna kolesa - Razno orodje - Lista omara - Rezervni deli - ipd. Stroj je pod napetostjo v našem skladišču.

Stanje: pripravljen za uporabo (rabljen), Weiler Primus stružnica Precizna stružnica z dodatki Weiler Primus stružnica: Višina konice: 125 mm Območje vrtljajev: 40-3000 min⁻¹ Razdalja med konicama: 400 mm Premer vretena: 24 mm Dodatki: 35 kos vpenjalnih tulec Vpenjalna glava 4 nosilci Multifix Omara za dodatke Ostala dodatna oprema glejte slike Itjdpfoxw R N Usx Ah Asr Vabljeni na ogled. Na zahtevo lahko za vas organiziramo ugoden prevoz! Prejmete uraden račun. Za tuje stranke je možen tudi račun brez DDV, pogoj je veljavna ID za DDV. Vmesna prodaja pridržana. Obiščite našo trgovino in si oglejte tudi ostalo ponudbo. Navedenih imena podjetij in blagovne znamke so last njihovih imetnikov in služijo le za identifikacijo in opis izdelkov. Možne so razlike v tehničnih podatkih ter napake v opisu, pridržujemo si pravico do sprememb.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Itsdeu Aftgepfx Ah Ajr Technical Specifications: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse Taper 2 >> Feeds: 0.03 to 0.15 mm/rev >> Threads possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: length 1.2 m, height 1.3 m, depth 0.65 m Accessories and Equipment: >> 1 pcs. 160 mm 3-jaw chuck with 1 set of jaws >> 1 pcs. new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet system with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the Machine: Offered is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was used in a training workshop. This new generation of Weiler lathes is very operator-friendly and can achieve ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stanje: zelo dobro (rabljeno), Parallel-Drehmaschine WEILER Typ PRIMUS Spitzenweite: 400 mm Max. Umlaufdurchmesser über Bett: 250 mm Max. Umlaufdurchmesser über Support: 130 mm Spindeldurchlass: 24 mm Multifix-Schnellwechselrevolver Typ A 3-Backenfutter Ø 155 mm Gewindeschneiden: Metrisch + Whitworth Reitstockkegel: MK2 Digitalanzeige: HEIDENHAIN ND522 Automatische Vorschübe: 2 Achsen Neuer Schaltschrank Lieferumfang: 1 4-Backenfutter Ø 155 mm, 4 Werkzeughalter, 1 Bohrfutter Spannung: 380 V Abmessungen (L x B x H): 1300 x 900 x 1900 mm Gewicht: ca. 500 kg Maschine in SEHR GUTEM ZUSTAND Itedpfx Ahsxnp I Do Aer

Leto izdelave: 1986, Stanje: rabljeno, Weiler Primus lathe, year of manufacture approx. 1986, three-jaw chuck, Multifix toolpost. The machine is in good condition and can be demonstrated under power by prior arrangement. Itedpfx Aen Ard Doh Ajr

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Specifications: - Year of manufacture: approx. 1985, Machine no. 1191 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose KK4 DIN 55027 - Tailstock taper: MK 2 - Feeds: 0.03 to 0.15 mm/rev - Thread cutting: Metric, Imperial, Module, and Diametral Pitch - Metric threads from 0.25 to 2.5 mm pitch - Weight approx. 360 kg - Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: - 1 pc. 3-jaw chuck 125 mm with 2 sets of jaws - Collet chuck with 18 collets - Multifix size A quick-change toolpost with 3 holders - Stop - Electronic spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-quality surfaces. Take the opportunity to inspect the machine under power on-site and see its condition for yourself. Itodpfxsvtp Eds Ah Aer

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paintwork!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short-taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds: 0.03 - 0.15 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Switchable spindle brake Ijdpevivmyofx Ah Astr >> Weight: approx. 360 kg >> Dimensions (L x H x D): 1.2 m x 1.3 m x 0.65 m Accessories and Equipment: >> 1 piece 125 mm NEW 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck with collets from 3 to 26 mm in 1 mm increments, new About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All carriages run smoothly and evenly. The bed guides are in very good condition. The Primus was installed in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows you to achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see its condition for yourself.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, For sale: WEILER lathe, model Primus LZ-GS The machine is in excellent condition. Technical specifications: Year of manufacture: 1989 Machine no.: 4443 Operating voltage: 380 V Centre height: 120 mm Centre distance: 430 mm Spindle speed: 60 - 3,000 rpm with 18 geared steps Spindle bore: 23 mm Short taper spindle nose, DIN 55027 Tailstock: MT 2 Feeds: 0.03 to 0.15 mm/rev Threads possible: metric, imperial, module, and diametral-pitch Metric thread pitches: 0.25 to 2.5 mm Itodpfx Ahoihig Ie Ajr Dimensions (LxHxD): 1.2 m x 1.3 m x 0.65 m Prices are subject to VAT. Inspections are possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or contact options, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 2012, premer struženja: 360 mm, KRMLJENJE .. CNC krmiljenje FUNKCIONALNOST .. Število prečnih suportov: 1 DELOVNO PODROČJE - STRUŽENJE - .. Največji premer vrtenja: 360 mm .. Največja dolžina obdelovanca: 800 mm Itedpfxox Ewd De Ah Aor GLAVNO VRETENO .. Hitrostno območje od: 25 /min .. Hitrostno območje do: 4000 /min ELEKTRIČNI PRIKLJUČNI PODATKI .. Priključna napetost: 400 V .. Omrežna frekvenca: 50 Hz MERE / TEŽE .. Skupna teža cca: 1400 kg Nosilec orodja 25 x 25

Stanje: dober (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5088, izvrtina vretena: 25 mm, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 60 obr/min, skupna višina: 1.300 mm, skupna dolžina: 1.200 mm, skupna širina: 800 mm, skupna masa: 700 kg, WEILER PRIMUS GS navojni in vijačni stružnica - Obratovalna napetost: 380 V - Krmilna napetost: 220 V - Priključna moč: 2 kW - Nazivni tok: 4,1 A - Frekvenca: 50 Hz - Špica med konicami: 450 mm - Višina konice nad ležiščem: 130 mm - Premer struženja nad ležiščem: 260 mm - Višina konice nad suportom: 70 mm - Premer struženja nad suportom: 140 mm Iodpsx Ekm Esfx Ah Ajtr Stroj je opremljen z konjičkom, Multifix nosilcem za stružno orodje in trijočeljustnim vpenjalom proizvajalca RÖHM, premer: 120 mm, vključno z ustrezno delavniško omaro in pripadajočo opremo. Gre za stroj iz učne delavnice. FCA D-73235 Weilheim Teck, naloženo na tovornjak.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stružnica Weiler Primus v vrhunskem stanju. Možen ogled pod napetostjo. Tehnični podatki: Razdalja med konicama: 450 mm Višina konic: 120 mm Itodex Htf Hepfx Ah Aer Premer vretena: 23 mm Hitrost vrtenja: 30–3000 min⁻¹ Konjiček: MK 2 Moč pogona: 1,5 kW Teža: 350 kg Dimenzije: 1200 x 650 x 1550 mm

Stanje: dober (rabljeno), Razdalja med konicama: 450 mm Višina konic: 120 mm Vreteno izvrtina: 23 mm Število vrtljajev: 40 – 3000 min⁻¹ Itjdsw I A Uxopfx Ah Asr Brezstopenjski pogon s 3 predstopnjami in digitalnim prikazovalnikom števila vrtljajev Nasadni konjiček: MK 2 Pogon: 1,5 kW Teža: 350 kg Dimenzije: 1200 x 650 x 1330 mm Barva: Resedino zelena RAL 6011. Digitalni prikazovalnik: Po želji ob doplačilu Dodatna oprema: Dodatna oprema na zahtevo

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus GS Lead and Feed Screw Lathe with 3-Axis Digital Readout Easson ES8 From training workshop – In excellent condition! Technical Data: • Year of manufacture: approx. 1990, machine no. 3768 Iodpsvkfhpofx Ah Astr • Centre height: 120 mm • Centre distance: 430 mm • Spindle speed: 60 – 3000 rpm in 18 gear steps • Spindle bore: 23 mm • Camlock spindle nose, DIN 4 • Tailstock: Morse taper 2 • Feeds: 0.03 to 0.15 mm/rev • Thread cutting: Metric, Inch, Module, and Diametral Pitch • Metric thread pitches: 0.25 to 2.5 mm • Weight: approx. 360 kg • Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: • 3-axis digital readout by Easson ES8 • Collet chuck system from 1 to 20 mm, collets in 1 mm increments with chuck and draw tube • 1 three-jaw chuck with 2 sets of jaws • 1 four-jaw chuck with 2 sets of jaws • Multifix size A with 3 tool holders • Bed stop • Facing attachment About the machine: Offered is a Weiler Primus lead and feed screw lathe, year approx. 1990, in outstanding condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The bed ways are in excellent condition. Even at high spindle speeds, the Weiler runs quietly. The machine comes from a large company’s training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surface finishes comparable to grinding. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stanje: rabljeno, L + Z Lathe WEILER Type LZ PRIMUS GS Itodpfx Ajrtd Uwoh Asr Machine No. 2461 Year of manufacture approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feed: longitudinal and cross Chuck flange: short taper DIN 55022 Size 4 Tailstock taper: MT 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 insert cartridge - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centring tip for collet chuck - Emergency stop - Folding chuck guard - Splash guard - Machine lamp - Electrical diagram - Machine mounted on a steel plate (Steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required floor space (L x W x H): 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Stanje: zelo dobro (rabljeno), WEILER PRIMUS Tip MD-G - Višina konic: 125 mm - Razdalja med konicama: 400 mm - Območje vrtljajev: 40–3000 vrt/min - Premer vretena: 24 mm - Električna zaščita vpenjalne glave - Sistem Multifix z vložki - Reitstock z vrtalno pinolo Itodpsxw H Dbjfx Ah Ajr - Vpenjalna glava s štirimi čeljustmi - Delovna svetilka - Omejevalnik postelje - Dokumentacija Mere: D x Š x V: 1,3 x 0,8 x 1,6 m / Teža: 450 kg Možnost napak ali napačnih vnosov pridržana.

Stanje: novo, Leto izdelave: 2025, CONDOR VC plus The new standard in conventional precision lathes. A high-quality, powerful, and energy-efficient precision lathe designed for high productivity in production and toolmaking, as well as in training and education environments. Itjdpfx Ahjqwipns Aor Premium quality, energy efficiency, precision, and universal application in production, training, and continuous education. It stands out thanks to: - Future-oriented technology - Maximum accuracy - Long service life - User-friendly ergonomics - Minimal footprint - Extensive range of accessories The consistent and innovative further development of the proven Condor series offers an economical and intelligent solution for your daily operations. Technical Data: WORKING RANGE Center height: 180 mm Swing diameter over bed: 360 mm Swing diameter over cross slide: 190 mm Distance between centers: 800 mm SPINDLE Spindle nose DIN 55027 / DIN ISO 702-3: Size 6 Spindle bore: 57 mm Spindle front bearing diameter: 90 mm MAIN DRIVE Power rating 60%/100% duty cycle: – / 10.5 kW Spindle speed range: 25 – 4,000 rpm Number of speeds: stepless FEED RANGE Number of feeds: stepless Longitudinal: 0.01 – 6 mm/rev Cross: 0.003 – 2 mm/rev THREADING RANGE Metric threads: 0.1 – 20 mm TAILSTOCK Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MK 3 ACCEPTANCE ACCURACY: DIN 8605 Equipped with WEILER screen display WTS 15 VC plus - Large, clear 15" touchscreen, rotatable and tiltable, resolution 1366 x 768 - Menu navigation via swipe gestures - Operating functions accessible via app manager - Operator panels freely configurable, placeable, and scalable - Drawings/sketches import from PDF files via USB interface, individually zoomable - Video-supported machine maintenance - Context-sensitive help menu (replaces WEILER VC plus screen display) The machine is located at our showroom in 71334 Waiblingen-Beinstein and is available immediately. For detailed equipment information, please contact us.

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant VC Precision Lathe Manufacturer: Weiler Itjdpfx Ahexd Tkno Aor Model: Weiler Praktikant VC Precision Lathe Year of manufacture: 2008 Condition: Used, very good, serviced and inspected with factory test report Technical Specifications Turning diameter: 250 mm Turning length: 650 mm Centre height: 160 mm Swing diameter over bed carriage: 320 mm Maximum swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Drive power – main spindle: 10 / 6.0 kW Number of gear stages: 1 Spindle nose: 5 / DIN 55027 Spindle bearing diameter (front): 70 mm Spindle bore: 40 mm Usable bar capacity: 40 mm Toolpost: System: MultiFix B Turning tool shank cross-section: 20 x 20 mm Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inch: 80-2 1/” Module: 0.25 – 4 mm Travel paths: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel range: 180° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirement: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC Precision Lathe – Machine lamp – Documentation – 3-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool set

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, incl. Schunk chuck Centre height: 160 mm Centre distance: 650 mm Spindle bore: Ø 40 mm Tailstock taper: MK3 Quill stroke: 85 mm Possible thread types: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.25 - 8 mm Iedpfx Aowk Dx Soh Aotr Spindle brake: engageable Voltage: 400V Dimensions: approx. 1.60 x 1.00 x 1.50 m (LxHxW) Weight: approx. 750 kg