Weiler Primus 2 nakup rabljenega (180)

Stanje: pripravljen za uporabo (rabljen), Weiler Primus stružnica Precizna stružnica z dodatki Weiler Primus stružnica: Višina konice: 125 mm Območje vrtljajev: 40-3000 min⁻¹ Razdalja med konicama: 400 mm Premer vretena: 24 mm Dodatki: 35 kos vpenjalnih tulec Vpenjalna glava 4 nosilci Multifix Omara za dodatke Ostala dodatna oprema glejte slike Vabljeni na ogled. Na zahtevo lahko za vas organiziramo ugoden prevoz! Ijdpfxjxw R N Uj Ah Astr Prejmete uraden račun. Za tuje stranke je možen tudi račun brez DDV, pogoj je veljavna ID za DDV. Vmesna prodaja pridržana. Obiščite našo trgovino in si oglejte tudi ostalo ponudbo. Navedenih imena podjetij in blagovne znamke so last njihovih imetnikov in služijo le za identifikacijo in opis izdelkov. Možne so razlike v tehničnih podatkih ter napake v opisu, pridržujemo si pravico do sprememb.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Specifications: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse Taper 2 >> Feeds: 0.03 to 0.15 mm/rev >> Threads possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: length 1.2 m, height 1.3 m, depth 0.65 m Accessories and Equipment: >> 1 pcs. 160 mm 3-jaw chuck with 1 set of jaws >> 1 pcs. new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet system with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the Machine: Offered is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was used in a training workshop. This new generation of Weiler lathes is very operator-friendly and can achieve ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition. Itjdju Aftgepfx Ah Aer

Stanje: zelo dobro (rabljeno), Parallel-Drehmaschine WEILER Typ PRIMUS Spitzenweite: 400 mm Max. Umlaufdurchmesser über Bett: 250 mm Max. Umlaufdurchmesser über Support: 130 mm Spindeldurchlass: 24 mm Multifix-Schnellwechselrevolver Typ A Itjdjxnp I Dspfx Ah Asr 3-Backenfutter Ø 155 mm Gewindeschneiden: Metrisch + Whitworth Reitstockkegel: MK2 Digitalanzeige: HEIDENHAIN ND522 Automatische Vorschübe: 2 Achsen Neuer Schaltschrank Lieferumfang: 1 4-Backenfutter Ø 155 mm, 4 Werkzeughalter, 1 Bohrfutter Spannung: 380 V Abmessungen (L x B x H): 1300 x 900 x 1900 mm Gewicht: ca. 500 kg Maschine in SEHR GUTEM ZUSTAND

Leto izdelave: 1986, Stanje: rabljeno, Weiler Primus lathe, year of manufacture approx. 1986, three-jaw chuck, Multifix toolpost. The machine is in good condition and can be demonstrated under power by prior arrangement. Iodpfx Asn Ard Doh Aetr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, premer struženja nad prečnim suportom: 340 mm, stružna dolžina: 2.000 mm, premer struženja: 570 mm, izvrtina vretena: 83 mm, Weiler Voest Alpine E50 stružnica Ijdpfx Asn Hp T Aoh Aetr Opremljena s 3-čeljustno glavo in 6 multifix nosilci orodij

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Specifications: - Year of manufacture: approx. 1985, Machine no. 1191 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose KK4 DIN 55027 - Tailstock taper: MK 2 - Feeds: 0.03 to 0.15 mm/rev - Thread cutting: Metric, Imperial, Module, and Diametral Pitch - Metric threads from 0.25 to 2.5 mm pitch - Weight approx. 360 kg - Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: - 1 pc. 3-jaw chuck 125 mm with 2 sets of jaws - Collet chuck with 18 collets - Multifix size A quick-change toolpost with 3 holders - Stop - Electronic spindle guard Iodjvtp Edjpfx Ah Astr About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-quality surfaces. Take the opportunity to inspect the machine under power on-site and see its condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paintwork!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short-taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds: 0.03 - 0.15 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions (L x H x D): 1.2 m x 1.3 m x 0.65 m Accessories and Equipment: >> 1 piece 125 mm NEW 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders Iodpfevivmyex Ah Astr >> New collet chuck with collets from 3 to 26 mm in 1 mm increments, new About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All carriages run smoothly and evenly. The bed guides are in very good condition. The Primus was installed in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows you to achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see its condition for yourself.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, For sale: WEILER lathe, model Primus LZ-GS The machine is in excellent condition. Technical specifications: Year of manufacture: 1989 Machine no.: 4443 Operating voltage: 380 V Centre height: 120 mm Centre distance: 430 mm Spindle speed: 60 - 3,000 rpm with 18 geared steps Spindle bore: 23 mm Short taper spindle nose, DIN 55027 Tailstock: MT 2 Feeds: 0.03 to 0.15 mm/rev Threads possible: metric, imperial, module, and diametral-pitch Metric thread pitches: 0.25 to 2.5 mm Dimensions (LxHxD): 1.2 m x 1.3 m x 0.65 m Prices are subject to VAT. Inspections are possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? Iodpfjihig Ijx Ah Astr For more information or contact options, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5088, izvrtina vretena: 25 mm, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 60 obr/min, skupna višina: 1.300 mm, skupna dolžina: 1.200 mm, skupna širina: 800 mm, skupna masa: 700 kg, WEILER PRIMUS GS navojni in vijačni stružnica - Obratovalna napetost: 380 V Isdpfx Ahox Ekm Ee Aetr - Krmilna napetost: 220 V - Priključna moč: 2 kW - Nazivni tok: 4,1 A - Frekvenca: 50 Hz - Špica med konicami: 450 mm - Višina konice nad ležiščem: 130 mm - Premer struženja nad ležiščem: 260 mm - Višina konice nad suportom: 70 mm - Premer struženja nad suportom: 140 mm Stroj je opremljen z konjičkom, Multifix nosilcem za stružno orodje in trijočeljustnim vpenjalom proizvajalca RÖHM, premer: 120 mm, vključno z ustrezno delavniško omaro in pripadajočo opremo. Gre za stroj iz učne delavnice. FCA D-73235 Weilheim Teck, naloženo na tovornjak.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stružnica Weiler Primus v vrhunskem stanju. Možen ogled pod napetostjo. Tehnični podatki: Razdalja med konicama: 450 mm Višina konic: 120 mm Premer vretena: 23 mm Hitrost vrtenja: 30–3000 min⁻¹ Konjiček: MK 2 Ijdpfex Htf Hsx Ah Aetr Moč pogona: 1,5 kW Teža: 350 kg Dimenzije: 1200 x 650 x 1550 mm

Stanje: dober (rabljeno), Razdalja med konicama: 450 mm Višina konic: 120 mm Vreteno izvrtina: 23 mm Število vrtljajev: 40 – 3000 min⁻¹ Brezstopenjski pogon s 3 predstopnjami in digitalnim prikazovalnikom števila vrtljajev Nasadni konjiček: MK 2 Pogon: 1,5 kW Teža: 350 kg Dimenzije: 1200 x 650 x 1330 mm Barva: Resedino zelena RAL 6011. Isdow I A Uxspfx Ah Aotr Digitalni prikazovalnik: Po želji ob doplačilu Dodatna oprema: Dodatna oprema na zahtevo

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Stružnica Weiler Primus VC, letnik 1999, z 3-osnim digitalnim prikazovalnikom Siemens, trizajčnim vpenjalom, Multifixom, zadnjo zaščito proti pršenju in električno zaščito vpenjala. Stroj je v dobrem, delujočem stanju, po dogovoru možen prikaz v obratovanju. Isdpfx Ahsx Afvgo Astr

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus GS Lead and Feed Screw Lathe with 3-Axis Digital Readout Easson ES8 From training workshop – In excellent condition! Technical Data: • Year of manufacture: approx. 1990, machine no. 3768 • Centre height: 120 mm • Centre distance: 430 mm • Spindle speed: 60 – 3000 rpm in 18 gear steps • Spindle bore: 23 mm • Camlock spindle nose, DIN 4 • Tailstock: Morse taper 2 • Feeds: 0.03 to 0.15 mm/rev • Thread cutting: Metric, Inch, Module, and Diametral Pitch Itedpovkfhpofx Ah Aor • Metric thread pitches: 0.25 to 2.5 mm • Weight: approx. 360 kg • Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: • 3-axis digital readout by Easson ES8 • Collet chuck system from 1 to 20 mm, collets in 1 mm increments with chuck and draw tube • 1 three-jaw chuck with 2 sets of jaws • 1 four-jaw chuck with 2 sets of jaws • Multifix size A with 3 tool holders • Bed stop • Facing attachment About the machine: Offered is a Weiler Primus lead and feed screw lathe, year approx. 1990, in outstanding condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The bed ways are in excellent condition. Even at high spindle speeds, the Weiler runs quietly. The machine comes from a large company’s training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surface finishes comparable to grinding. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stanje: rabljeno, L + Z Lathe WEILER Type LZ PRIMUS GS Iedpfx Aertd Uwoh Ajtr Machine No. 2461 Year of manufacture approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feed: longitudinal and cross Chuck flange: short taper DIN 55022 Size 4 Tailstock taper: MT 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 insert cartridge - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centring tip for collet chuck - Emergency stop - Folding chuck guard - Splash guard - Machine lamp - Electrical diagram - Machine mounted on a steel plate (Steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required floor space (L x W x H): 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Stanje: zelo dobro (rabljeno), WEILER PRIMUS Tip MD-G - Višina konic: 125 mm - Razdalja med konicama: 400 mm - Območje vrtljajev: 40–3000 vrt/min - Premer vretena: 24 mm - Električna zaščita vpenjalne glave - Sistem Multifix z vložki - Reitstock z vrtalno pinolo Iedpfxjxw H Dbe Ah Ajtr - Vpenjalna glava s štirimi čeljustmi - Delovna svetilka - Omejevalnik postelje - Dokumentacija Mere: D x Š x V: 1,3 x 0,8 x 1,6 m / Teža: 450 kg Možnost napak ali napačnih vnosov pridržana.

Stanje: dober (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 10279, premer struženja nad prečnim suportom: 200 mm, izvrtina vretena: 35 mm, premer struženja: 300 mm, višina središča: 150 mm, stružna dolžina: 750 mm, skupna dolžina: 1.860 mm, skupna širina: 700 mm, skupna višina: 1.800 mm, največja hitrost vretena: 2.800 obr/min, hitrost vretena (min.): 40 obr/min, skupna masa: 1.030 kg, - Operating voltage: 380 V - Connected load: 3 kW - Rated current: 25 A Itsdpsv Irgtofx Ah Aor - Frequency: 50 Hz Features: - Tailstock - Multifix Type B tool post - Three-jaw chuck (diameter: 160 mm) - 2-axis digital readout by RSF

Stanje: pripravljen za uporabo (rabljen), Drehlänge 500 mm Drehdurchmesser über Bett 297 mm Drehdurchmesser über Support 160 mm Spindelbohrung 36,0 mm Aufnahme DIN 55022 Gr. 5 Pinole: 3 MK Pinolenweg 90,0 mm Drehzahl 30 - 3550 o/min Motordrehzahlen: 1410 / 2830 o/min Gesamtleistungsbedarf 3,3 kW Spannung 380 V Maschinengewicht ca. 620 kg Abmessung D-Š-V 1420 x 700 x 1200 mm iz stručne škole – u veoma dobrom stanju (!!) posebno pogodna za izradu preciznih obradaka srednje veličine Oprema: - robusni strug sa vođenom/uvučenom navojnom vretenom - RÖHM trostanični stezni uređaj Ø 160 mm - preklopna zaštita stezne glave - ključ za steznu glavu - MULTIFIX nosač noža tipa A, sa 3 nova uloška - pomični konjić - zakretna radna lampa - upravljački panel, napred levo Isdpexq Hhysfx Ah Aotr - automatski pomaci za uzdužni i poprečni suport - postolje mašine sa ormarom (prostor za odlaganje) - zadnji zaštitni lim protiv prskanja strugotine - 1 prazan ormar za alat - taster za hitno zaustavljanje - uputstvo za upotrebu

Stanje: rabljeno, Leto izdelave: 1999, Turning diameter 150 mm Turning length 500 mm Total power requirement 4 kW Machine weight approx. 0.8 t O F F E R We can offer you the following ex-stock, subject to prior sale and errors: W E I L E R LZS - Universal Lathe with Digital Readout Model: PRIMUS VC Year of manufacture: 1999 _____ Centre height 140 mm Max. turning diameter over cross slide 150 mm Max. swing over bed 280 mm Distance between centres 500 mm Spindle bore 40 mm Infinitely variable speed 30 - 4,000 rpm 24 longitudinal feeds 0.02 - 0.63 mm/rev 24 facing feeds (longitudinal feeds x 8) 0.006 - mm/rev Metric threads mm/pitch Inch threads 80 - 2 TPI Module threads module Spindle drive 1.5 kW Total drive 4 kW - 380 V - 50 Hz Weight 800 kg Ijdpfxevm Dv Dj Ah Astr Accessories / Special Equipment • SIEMENS 3-axis digital readout with X-axis, Z-axis, and additional Z-axis (compound slide) • Multifix-A tool quick-change holder • Equipped with a WEILER 3-jaw chuck, 140 mm diameter, mounted • Machine base for tool storage with integrated control cabinet, coolant system • Operating manuals Condition : very good – ready for demonstration Ideal for training workshops Delivery : ex-stock – as inspected Payment : strictly net upon collection – after receipt of invoice We look forward to receiving your order. Further lathes of all sizes in stock – please feel free to enquire.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Weiler Primus VC Precision Centre Lathe 3-Axis Digital Readout K&C NEW with VC Drive, Infinitely Variable Speed and CE. Very Good Condition Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4000 rpm, infinitely variable >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 Size 5 with bayonet lock >> Tailstock: MT3 >> Feeds from 0.02 to 0.63 mm/rev >> Available threads: metric, imperial, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be engaged >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Equipment and Accessories: >> 3-axis digital readout K&C NEW >> Collet device with collets 3 to 26 mm, new, incremented by 1 mm, NEW Iedsw Idlljpfx Ah Aetr >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> Electronic chip guard >> Machine feet >> Splash guard About the Machine: For sale is a Weiler Primus VC lead and feed screw lathe, year 2003, in very good original condition. An excellent lathe with VC drive and infinitely variable speed control of the main spindle. The digital readout and scales from K&C are new. This newer generation of Weiler lathes is user-friendly and allows for producing surface finishes comparable to grinding. The K&C digital readout further simplifies and improves accuracy of operation. You are welcome to inspect the machine powered up at our premises and convince yourself of its condition.

Stanje: dober (rabljeno), Leto izdelave: 2000, Weiler Primus VC, Iodpfxsv Ifxis Ah Astr Year of manufacture: 2000, Digital readout, Centre distance: 500 mm, Max. swing over cross slide: 150 mm, Spindle speed up to 4,000 rpm, Spindle bore: 40 mm, Spindle drive: 1.5 kW, Multifix toolholder, 24 longitudinal feeds, Metric threads, Inch threads,

Stanje: dober (rabljeno), WEILER CONDOR VS 2 iz univerze (preizkusni laboratorij) - Vodila "kot nova" - Višina konic: 165 mm - Premer vrtenja nad posteljo: 330 mm - Razdalja med konicama: 800 mm - Območje vrtljajev: 28-2800 obr/min - Avtomatski vzdolžni / prečni pomiki - Prehod vretena: 40 mm - Navoj / metrični / colski ipd. - Vpenjalne klešče – hitrovpenjalna naprava vklj. s kleščami - Štirikraka glava Röhm - Čelna plošča - Štirikraka čelna plošča - Zaščita glave - Multifix z vložki Iodpfexc H Tyox Ah Aotr - Nujna zaustavitev - Dokumentacija Dimenzije: D x Š x V 2 x 0,8 x 1,6 metra / Teža 900 kg Možnost napak / sprememb besedila pridržana

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Universal lead and feed screw lathe Make: WEILER Model: Primus VC Year of manufacture: 2007 - overhauled Newly painted RAL 7035 light grey Machine no.: CK17 Centre height: 140 mm Centre distance: 500 mm Spindle bore: 40 mm with warranty Geometric acceptance test with inspection protocol Accessories: Itodpfsv D Ip Nsx Ah Aor - 3-axis digital readout SIEMENS - Chuck guard with electrical interlock - Braked drive motor - Quick-change tool post, base body size A - Bed stop - Covered lead and feed screw - Chip guard at rear - Removable chip tray - Operating manual - used, as seen -

Stanje: pripravljen za uporabo (rabljen), Drežna dužina 500 mm Drežni prečnik iznad kreveta 297 mm Drežni prečnik iznad nosača 160 mm Provrt vretena 36,0 mm Prihvat DIN 55022 grupa 5 Konus pinole: 3 MK Hod pinole 90,0 mm Brzina obrtanja 30 - 3550 o/min Itsdpfxexnda Uo Ah Ajr Brzine motora: 1410 / 2830 o/min Ukupna potrebna snaga 3,3 kW Napon 380 V Težina mašine cca 620 kg Dimenzije D-Š-V 1420 x 700 x 1200 mm iz škole za stručno obrazovanje – veoma dobro stanje (!!) poseno pogodna za izradu srednje preciznih strugarskih delova Oprema: - robusni strug sa vođenom/uvlačivom vretenom - HEIDENHAIN digitalni prikaz 3 ose "VRZ 773" - RÖHM trovilinsko stezno glavno telo Ø 160 mm - preklopni zaštitni poklopac za strugarsku glavu - ključ za stezno telo - MULTIFIX držač alata tip A, sa 3 nova umetka - pomerivi konjić - rotirajuća mašinska lampa - kontrolna tabla, napred levo - automatski pomaci za poprečni i gornji nosač - postolje mašine sa ormarićem (prostor za odlaganje) - zadnji zaštitni zid protiv prskanja strugotine - 1x prazan ormar za alat - taster za HITNO isključivanje - uputstvo za upotrebu

Stanje: dober (rabljeno), 1 rabljeni stružnica z vodilnim in pogonskim vretenom Proizvajalec: Weiler Tip: Condor VS 2 Tehnični podatki: Itjdpfjw Rcrcjx Ah Aor Višina konic: 160 mm Razdalja med konicama: 800 mm Premer vretenaste odprtine: 40 mm Širina postelje: 240 mm Število vrtljajev: 12 - 2800 min-1 Pogonska moč: 3 kW Vpenjanje konjička: MK 3 Hod pinole: 110 mm Pomiki: 0,037 - 1,253 mm/obrat Teža cca 800 kg Dimenzije (ŠxGxV): cca 1930 x 880 x 1470 mm Oprema: 3-čeljustna vpenjalna glava Hitromenjalni nosilec sistema Multifix

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 40 mm, višina središča: 140 mm, stružna dolžina: 500 mm, največja hitrost vretena: 4.000 obr/min, hitrost vretena (min.): 30 obr/min, največja hitrost vrtenja: 4.000 obr/min, vrtljajska hitrost (min.): 30 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Distance between centres: 500 mm Centre height: 140 mm Spindle bore: 40 mm Spindle speed: 30 - 4000 rpm Weight: approx. 800 kg Dimensions: approx. 1430 x 935 x 1550 mm Accessories: operation manual, lamp, Multifix tool holder, collet chuck device (at extra charge) Further accessories available on request Ijdpfxjvnr E No Ah Astr