Weiler Condor 81 nakup rabljenega (198)

Stanje: rabljeno, Leto izdelave: 1984, - K+C 3-axis position display - Bison 3204-160 3-jaw chuck - Collet chuck + various collets - Chuck guard - Multifix quick-change toolpost - Coolant system - Chip guard/rear splash guard - Complete service performed (oil change, belt replacement, etc.) - Year of manufacture: 1984 Specifications: - Swing diameter over bed: 330 mm - Swing diameter over cross slide: 185 mm - Turning length between centers: 750 mm - Turning length between centers with covered lead & feed screw: 650 mm - Center height: 165 mm - Bed width: 240 mm Spindle: - Spindle nose DIN 55027: Size 5 - or similar DIN 55029 (Camlock D1): Size 4 - Spindle diameter in front bearing: 70 mm - Spindle bore: 40 mm - Internal taper according to DIN 228: MT5 - Center taper according to DIN 806: MT3 - Max. faceplate diameter: 280 mm - Standard chuck diameter: 160 mm - Maximum chuck diameter: 200 mm Tool slide: - Bed slide guide length: 365 mm - Cross slide travel: 175 mm - Cross slide leadscrew pitch: 3 mm - Cross slide width: 140 mm - Top slide travel: 140 mm - Top slide leadscrew pitch: 3 mm Tailstock: - Quill stroke: 110 mm - Quill diameter: 50 mm - Taper according to DIN 228: MT3 Spindle speeds: - Number: 16 / 32 - Range: 45-2800 / 22-2800 rpm Feeds: - Number: 120 - Standard range longitudinal via gears, metric/inch: 0.016 - 0.25 mm/rev - Standard range longitudinal via toothed belt, metric/inch: 0.022 - 0.5 mm/rev - Coarse longitudinal via gears, metric/inch: 0.125 - 2 mm/rev - Coarse longitudinal via toothed belt, metric/inch: 0.045 - 4 mm/rev - Facing feeds: 0.3733 x longitudinal feed Thread pitches: - Standard metric: 0.18 - 28 mm - Standard inch: 80 - 1 1/2 TPI - Module: 0.1 - 9 mm - Diametral pitch: 200 - 2 3/4 TPI - Rapid thread cutting device: 8-step - Leadscrew pitch: 6 mm / 4 TPI Workpiece weights: - Between centers without steadies: 160 kg - Between centers with steadies: 50 kg - Maximum workpiece mass between centers (incl. clamping device): 125 kg Electrical data: - Motor power: 3 kW - Rated motor current: 7.1 A - Operating voltage: 400 V Hsdpfxov U Dlzs Ah Dsfn - Control voltage: 42 V Dimensions and weight: - Dimensions (WxHxD): 1832 x 1290 x 880 mm - Spindle center height above floor: 1150 mm - Weight: approx. 1020 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Weiler Condor 81 Weiler Condor 81 lathe with Heidenhain digital display, year of manufacture 1992, in very good original condition. The machine comes from the training workshop of a renowned German engineering company. Technical Data: Year of manufacture: 2003 Engine lathe WEILER Type Condor 81 Centre distance: 750 mm Swing over bed: 330 mm Centre height over bed: 165 mm Swing over cross slide: 180 mm Centre height over cross slide: 90 mm Spindle bore: 40 mm Chuck mounting: short taper DIN 55027 size 5 Tailstock taper: MK 3 Quill travel: 110 mm Spindle speed: 45 – 2800 rpm, 16 steps Drive power: 3 kW Power connection: 400 Volt, 50 Hz Spindle speed via 16 gearbox steps Required space (L x W x H): 1850 x 950 x 1400 mm Weight: 1100 kg Accessories and Equipment: Röhm 3-jaw chuck Multifix quick-change toolpost Coolant system Heidenhain digital display About the Machine: We offer a Weiler Condor 81 lathe with Heidenhain digital display, year of manufacture 1992, in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. Even at high speeds, the Weiler runs very quietly. This newer generation of lathes is extremely user-friendly and can produce surfaces comparable to grinding. Take the opportunity to inspect the machine under power at our site and see the condition for yourself. Hfsdpfx Ahew T U Sgj Djn You will find further lathes from well-known manufacturers on our website.

Stanje: rabljeno, WEILER Engine Lathe Type Condor 81 A Machine No. 36553 Year of manufacture approx. 1985 Centre distance: 750 mm Swing over bed: 330 mm Centre height over bed: 165 mm Swing over cross slide: 180 mm Centre height over cross slide: 90 mm Spindle bore: 40 mm Chuck mount: Short taper DIN 55027 size 5 Tailstock taper: MK 3 Quill stroke: 110 mm Spindle speed: 45 - 2800 rpm, 16 steps Drive power: 3 kW Mains connection: 400 Volt, 50 Hz - Spindle speed via 16-step gearbox - 3-jaw chuck Ø 160 mm RÖHM with internal and external jaws - Multifix quick-change toolpost size B with 3 holders - Automatic longitudinal and face feed - Electromechanical spindle brake - Emergency stop - Coolant tank with pump integrated in the machine base, without supply line to the working area Hfsdpfek S Ht Asx Ah Don - Hinged chuck guard - Splash guard - 1 live centre - Electrical diagram and operating manual Space required (L x W x H): 1850 x 950 x 1400 mm Weight: 1100 kg Good condition

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Used L+Z Lathe with 3-axis digital readout Manufacturer: WEILER Model: Condor 81 B Machine No.: 87596 Year of manufacture: approx. 1987 Centre distance: 750 mm Swing over bed: Ø 330 mm Centre height over bed: 165 mm Swing over cross slide: Ø 180 mm Centre height over cross slide: 90 mm Spindle bore: Ø 40 mm Tailstock taper: MK 3 Quill travel: 110 mm Spindle speed: 45 - 2800 rpm (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (main motor speed 1+2) Power supply: 400 Volt, 50 Hz Connected load: 32 kW Control voltage: 42 Volt Equipment & Accessories: - 3-axis digital readout (Heidenhain VRZ 750) - Quick-change collet system and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix quick-change tool post, size B - LED work light - Bed stop - Automatic longitudinal and face feeds - Electromechanical spindle brake (switchable) - 2 x emergency stop - Electric chuck key interlock (via sleeve with push-button) - Coolant tank with pump integrated in machine base - Foldable chuck guard - Splash guard wall - Circuit diagram - Adjustable machine feet Required space: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This newer generation of Weiler lathes is extremely user-friendly and robust. The machine can be demonstrated under power at the site. Hfsdsvadqzepfx Ah Djn All information without guarantee. Subject to prior sale.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Weiler Center Lathe Model Condor 81 Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Specifications: >> Year of manufacture: 1988, Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, Size 5 with bayonet lock Hsdpfx Aotlu Scsh Defn >> Tailstock: Morse taper 3 >> Feeds: 0.015 to 0.46 mm/rev >> Threads possible: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake, switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pc. new 3-jaw chuck with 2 sets of jaws >> Collet system with collets from 3 to 30 mm, 40 collets, some duplicates >> Multifix toolpost, size B, with 3 holders >> Bed stop >> Machine feet >> Drill chuck >> Live center Safety Features: >> Lead and feed screw guard >> 2 emergency stop buttons >> Spindle brake About the Machine: For sale is a used Weiler Condor 81 lathe from 1988 in very good condition. Naturally, the machine is fully functional. Both the lead and feed screws are fitted with protective covers for safety. This is a very robust and powerful machine. The 3-axis digital readout from Heidenhain makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has also been carried out. This newer generation of Weiler lathe is very user-friendly. Take the opportunity to view and test the machine under power at our facility.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81, Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout by K&C Technical Data: >> Year of manufacture: 1983, Machine No. 83-067 >> Centre height: 165 mm >> Distance between centres: 750 mm >> Spindle speeds: from 22 to 2,800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, Size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake, selectable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Scope of Delivery and Accessories: >> NEW 3-axis digital readout by K&C, 12-month manufacturer’s warranty, complete with manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference marker, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switching Hjdpfewb Supox Ah Dsfn >> 1 pcs 3-jaw chuck NEW 160 mm, 2 sets of jaws >> NEW collet chuck and NEW collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 3 holders >> Electronic spindle protection >> Rear guard >> Coolant system >> Machine feet About the Machine: For sale is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital readout from K&C makes work even easier and more precise. The machine has been both electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test the machine under power at our site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 – Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout by K&C Technical Data: >> Year of manufacture: 1987, Machine No. 87 835 Hfedpfjwrmuxjx Ah Dsn >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse Taper 3 >> Feeds from 0.015 to 0.46 mm/rev >> Threads: Metric, Imperial, Module, and Diametral-Pitch possible >> Metric thread pitches: 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Features: >> NEW 3-axis digital readout from K&C, 12 months manufacturer warranty with operating manual Features: Switching between mm/inch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter function, quick zeroing, counting direction reversal >> 1 x 160 mm 3-jaw chuck NEW, 2 sets of jaws >> 1 x 160 mm 4-jaw chuck, 1 set of jaws >> Collet chuck and NEW collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Coolant system >> Machine feet About the machine: Offered here is a used Weiler Condor 81 in very good condition. The machine is, of course, fully operational and has been completely dismantled and newly repainted. A very robust and powerful machine. The new K&C 3-axis digital readout makes operation even easier and more accurate. The machine has been electrically and mechanically tested in our facility. A complete oil change was carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power on site.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout (NEW) Geometrically overhauled with an acceptance report certifying tolerances compliant with new machine standards. Technical Data: >> Machine No.: 84-121 Hsdpfx Ajwrm Dteh Djfn >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock Morse Taper: MK 3 >> Feeds: 0.015 to 0.46 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle Brake (switchable) >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Accessories: >> 3-axis digital readout from K&C (new), 12 months manufacturer's warranty, operating manual included Functions: mm/inch selection, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, selectable counting direction >> NEW collet chuck, NEW collet set 3–26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws (NEW) >> Multifix (Quick-Change Toolpost) Size B (NEW) with 3 tool holders >> Bed stop >> Electrical chuck guard (NEW) >> Rear splash guard >> Operating manual >> Coolant system >> Machine levelling feet About the Machine: A Weiler Condor 81 lead and feed screw lathe is being offered in excellent, geometrically overhauled condition. The slides have been newly ground or hand-scraped. Delivered with an inspection protocol. The accessories, collets, and chuck are all new. For safety: The machine is equipped with a braking motor, electronic spindle guard, and two emergency-stop buttons—a lathe in as-new condition. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and capable of producing surfaces comparable to grinding. Take the opportunity to view and test the machine under power on site to convince yourself of its condition.

Stanje: dober (rabljeno), Leto izdelave: 1988, Weiler Lathe Type: Condor B 2-axis digital readout Centre height: 165 mm Centre distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 185 mm Spindle bore: 40 mm Connected load: 3 kW Spindle speed: 22-2800 rpm Tailstock taper: MT 3 Coolant pump (not connected) Work lamp Hfodevgmbvepfx Ah Djn automatic longitudinal and cross feed spindle brake - foldable chuck guard - splash guard Weight approx. 1040 kg 3-jaw chuck Multifix B tool post Live centre

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 36 mm, višina središča: 155 mm, stružna dolžina: 800 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 25 obr/min, used centre lathe Weiler Condor, No. 7939, Centre height: 155 mm Centre distance: 800 mm Spindle speeds: 12–2800 rpm Spindle bore: 36 mm Hodpfx Aov R Tdxoh Djfn Accessories: 1x 3-jaw chuck RÖHM, Ø 160 mm, Multifix base unit size B with 2 inserts, keyless drill chuck, live centre, and coolant system. The machine is located in our warehouse in 71334 Waiblingen-Beinstein and is available immediately.

Stanje: zelo dobro (rabljeno), WEILER CONDOR v popolnem originalnem stanju -Stroj iz izobraževalne ustanove -Vodila kot "NOVA" -Triosni digitalni prikazovalnik "Nov" -Trizelistna vpenjalna glava 200 mm "Nova" -Naprava za vpenjalne tule z vključenim kompletom vpenjalnih tulcev "NOVA" -Multifix z vložki "Nov" -Električna zaščita glave -Štirizelistna vpenjalna glava -Končna konica + vrtalna glava -Dokumentacija Hfodpfx Ahsw Iv U Se Don -Originalen lak -Premer struženja 330 mm -Premer struženja nad suportom 170 mm -Dolžina struženja 800 mm -Vrtina vretena 38 mm -Število vrtljajev vretena 24-2800 min⁻¹ -Avtomatski vzdolžni / prečni pomiki -Konus konjička MK 3 -Delovna svetilka -Nujna zaustavitev / izklop Mere: D x Š x V 1,9 x 0,9 x 1,6 metra / Teža 850 kg Pridržujemo si pravico do napak / tipkarskih napak

Stanje: dober (rabljeno), Distance between centres: 800 mm Spindle bore: 38 mm Hjdpoukrtnsfx Ah Dofn Centre height: 165 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 170 mm Spindle speed: 24–2800 rpm Dimensions: 1600 mm x 600 mm x 1250 mm Weight: 850 kg

Stanje: dober (rabljeno), Lead and feed screw lathe WEILER CONDOR from educational institution - Original paint - Centre height: 165 mm - Swing over bed: 330 mm - Swing over cross slide: 170 mm - Turning length: 800 mm - Spindle speeds: 24–2800 rpm - Automatic longitudinal and cross feeds - Spindle bore: 38 mm - Tailstock: MT3 - Collet chuck system incl. 17 collets - 3-jaw chuck - Multifix quick-change toolpost with inserts - Electric chuck guard - Chip guard at rear - Work lamp - Documentation - Various accessories Dimensions: LxWxH: 1.9 x 0.9 x 1.6 meters / Weight: 800 kg Hsdpfjwm I E Iex Ah Dsfn Subject to errors and input mistakes

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Konvencionalni stružnica WEILER CONDOR VS2 Hedpsxmg S Rsfx Ah Djfn Tehnične podrobnosti Vretenina odprtina: 38 mm Obodni premer nad posteljico: 340 mm Obodni premer nad zgornjim suportom: 200 mm Dolžina struženja: 750 mm Maks. hitrost vretena: 2.800 vrt/min Min. hitrost vretena: 12 vrt/min Skupna dolžina: 1.700 mm Skupna širina: 650 mm Skupna višina: 1.500 mm Skupna teža: 800 kg

Stanje: zelo dobro (rabljeno), izvrtina vretena: 38 mm, premer struženja nad ležiščem sani: 340 mm, premer struženja nad zgornjim sanežem: 200 mm, stružna dolžina: 750 mm, skupna dolžina: 1.700 mm, skupna širina: 650 mm, skupna višina: 1.500 mm, največja hitrost vretena: 2.800 obr/min, hitrost vretena (min.): 12 obr/min, skupna masa: 800 kg, Equipped with: Hsdpfx Ahewxq Ics Dofn – Tailstock – Multifix toolpost – RÖHM three-jaw chuck (Ø 160 mm)

Stanje: novo, Leto izdelave: 2025, CONDOR VC plus The new standard in conventional precision lathes. A high-quality, powerful, and energy-efficient precision lathe designed for high productivity in production and toolmaking, as well as in training and education environments. Premium quality, energy efficiency, precision, and universal application in production, training, and continuous education. It stands out thanks to: - Future-oriented technology - Maximum accuracy - Long service life - User-friendly ergonomics - Minimal footprint - Extensive range of accessories The consistent and innovative further development of the proven Condor series offers an economical and intelligent solution for your daily operations. Technical Data: WORKING RANGE Center height: 180 mm Swing diameter over bed: 360 mm Swing diameter over cross slide: 190 mm Distance between centers: 800 mm SPINDLE Spindle nose DIN 55027 / DIN ISO 702-3: Size 6 Spindle bore: 57 mm Spindle front bearing diameter: 90 mm Hjdpfx Ajqwipnsh Dsfn MAIN DRIVE Power rating 60%/100% duty cycle: – / 10.5 kW Spindle speed range: 25 – 4,000 rpm Number of speeds: stepless FEED RANGE Number of feeds: stepless Longitudinal: 0.01 – 6 mm/rev Cross: 0.003 – 2 mm/rev THREADING RANGE Metric threads: 0.1 – 20 mm TAILSTOCK Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MK 3 ACCEPTANCE ACCURACY: DIN 8605 Equipped with WEILER screen display WTS 15 VC plus - Large, clear 15" touchscreen, rotatable and tiltable, resolution 1366 x 768 - Menu navigation via swipe gestures - Operating functions accessible via app manager - Operator panels freely configurable, placeable, and scalable - Drawings/sketches import from PDF files via USB interface, individually zoomable - Video-supported machine maintenance - Context-sensitive help menu (replaces WEILER VC plus screen display) The machine is located at our showroom in 71334 Waiblingen-Beinstein and is available immediately. For detailed equipment information, please contact us.

Stanje: pripravljen za uporabo (rabljen), Drehlänge 800 mm Drehdurchmesser über Bett 330 mm Drehdurchmesser über Support 170 mm Drehzahlbereich 24 - 2800 U/min Spindelbohrung 38,0 mm Spitzenhöhe 165 mm Gesamtleistungsbedarf 3,5 kW Maschinengewicht ca. 850 kg Raumbedarf ca. 1850 x 800 x 1700 mm aus einer Berufsschule – guter Zustand (!!) besonders geeignet für mittlere Präzisions-Drehteile Ausstattung: - Robuste Leit-/Zugspindel-Drehmaschine - HEIDENHAIN 3-Achs Digitalanzeige "VRZ 770" - RÖHM Dreibackenfutter Ø 160 mm - klappbarer Drehfutterschutz - Futterschlüssel - TRIPAN-Stahlhalter mit 3 Einsätzen - Verschiebbarer Reitstock - Schwenkbare Maschinenleuchte Hodjxmaktspfx Ah Dsfn - Bedienfeld vorne links - Automatische Vorschübe für Plan- und Obersupport - Maschinenuntergestell mit Schranktür (Staufläche) - Spänespritzschutz-Rückwand - 1 leerer Werkzeugschrank - NOT-AUS-Taster - Bedienungsanleitung

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor B with Lead and Feed Screw, 3-Axis Digital Readout by K&C, NEW, CE Compliant! Technical Specifications: >> Machine No.: 2442, Year of manufacture: 1997 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 (MT 3) >> Feeds from 0.015 to 0.46 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and Features: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty with operating manual Functions: mm/inch conversion, coordinate choice ABS/INC, value halving, reference mark, tool programming (200 tools), taper calculation, radius/diameter, one-touch zeroing, count direction switching >> 1 piece new 3-jaw chuck 160 mm, 2 sets of jaws >> 1 piece 4-jaw chuck 200 mm, 1 set of jaws >> New collet chuck and new collets from 3 to 25 mm in 1 mm increments >> Multifix size B quick-change tool post with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear cover >> Machine feet Hfsdpsxcuazefx Ah Don Safety features: electronic spindle guard, 2 emergency stop buttons, change gear box with limit switch, spindle brake About the machine: Offered is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our premises.

Stanje: dober (rabljeno), WEILER CONDOR VS 2 iz univerze (preizkusni laboratorij) - Vodila "kot nova" - Višina konic: 165 mm - Premer vrtenja nad posteljo: 330 mm - Razdalja med konicama: 800 mm - Območje vrtljajev: 28-2800 obr/min - Avtomatski vzdolžni / prečni pomiki - Prehod vretena: 40 mm - Navoj / metrični / colski ipd. - Vpenjalne klešče – hitrovpenjalna naprava vklj. s kleščami - Štirikraka glava Röhm - Čelna plošča - Štirikraka čelna plošča Hfsdsxc H Tyspfx Ah Djn - Zaščita glave - Multifix z vložki - Nujna zaustavitev - Dokumentacija Dimenzije: D x Š x V 2 x 0,8 x 1,6 metra / Teža 900 kg Možnost napak / sprememb besedila pridržana

Stanje: dober (rabljeno), 1 rabljeni stružnica z vodilnim in pogonskim vretenom Proizvajalec: Weiler Tip: Condor VS 2 Tehnični podatki: Hfodpfx Asw Rcrceh Djn Višina konic: 160 mm Razdalja med konicama: 800 mm Premer vretenaste odprtine: 40 mm Širina postelje: 240 mm Število vrtljajev: 12 - 2800 min-1 Pogonska moč: 3 kW Vpenjanje konjička: MK 3 Hod pinole: 110 mm Pomiki: 0,037 - 1,253 mm/obrat Teža cca 800 kg Dimenzije (ŠxGxV): cca 1930 x 880 x 1470 mm Oprema: 3-čeljustna vpenjalna glava Hitromenjalni nosilec sistema Multifix

Stanje: dober (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 10279, premer struženja nad prečnim suportom: 200 mm, izvrtina vretena: 35 mm, premer struženja: 300 mm, višina središča: 150 mm, stružna dolžina: 750 mm, skupna dolžina: 1.860 mm, skupna širina: 700 mm, skupna višina: 1.800 mm, največja hitrost vretena: 2.800 obr/min, hitrost vretena (min.): 40 obr/min, skupna masa: 1.030 kg, - Operating voltage: 380 V - Connected load: 3 kW - Rated current: 25 A - Frequency: 50 Hz Features: - Tailstock - Multifix Type B tool post - Three-jaw chuck (diameter: 160 mm) Hedov Irgtjpfx Ah Djfn - 2-axis digital readout by RSF

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 40 mm, višina središča: 165 mm, širina na sredini: 750 mm, Dear Sir or Madam, We are offering for sale a Weiler Condor B lathe. This model stands out for its exceptionally user-friendly operation and an excellent ratio of footprint to center height and center distance. The Condor B is positioned between the Weiler Praktikant and Weiler Commodor models, making it a true all-rounder for any workshop. The machine has been partially overhauled in our workshop, ensuring that it is in excellent technical and optical condition. All guides are in good order, the gearboxes run smoothly and quietly, and the levers can be shifted with ease. You are welcome to inspect the machine on-site to verify its condition. Availability: upon request Centre Height: 165mm Centre Distance: 750mm Spindle Bore: Ø 40mm Tailstock Taper: MT3 Chuck Mount: Short Taper DIN55027 Size 5 with bayonet lock Quill Travel: 85mm Speeds: 22–2800 rpm Thread Types: Metric, Imperial, Module, Diametral Pitch Metric Thread Pitches: 0.18–28mm Hfsdpfxsw N Np Ss Ah Dsn Spindle Brake: Switchable Voltage: 400V Dimensions: approx. 1.80 x 1.30 x 0.9 m (L x H x W) Weight: approx. 1100 kg Additional features and accessories: 3-axis digital readout K+C (NEW), chuck guard (NEW), coolant system, 2x emergency stops, lead- and feed screw covers (optional), operating manual, and much more on request. Our service promise to you: - We are a certified master craftsman company specializing in mechanical engineering. - All machines are at least workshop tested. - All lubricants and, if necessary, worn components are replaced prior to sale. - On request, we can provide a partial or complete overhaul of the selected machine. - On request, we can repaint the selected machine in your desired color. - On request, you can order additional accessories such as tools directly from us. - On request, we can also install further accessories such as safety equipment. - We are happy to organize shipping and/or installation for you.

Stanje: pripravljen za uporabo (rabljen), Centre height: 165 mm, centre distance: 800 mm, turning diameter over bed/cross slide: 330 mm/185 mm, spindle bore: 40 mm, spindle speed: 2800 rpm, machine dimensions X/Y/Z: approx. 2000 mm/1000 mm/1700 mm, weight: approx. 900 kg. An on-site inspection is possible. Hodpfewq R N Dsx Ah Djfn

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with NEW 3-axis Digital Readout from K&C – FROM TRAINING WORKSHOP! Technical Data: >> Machine No. 91-1814, Year 1991 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, Size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types: Metric, Inch, Module, and Diametral Pitch Hodpfx Ahow Nw Dqj Defn >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Equipment and Features: >> New 3-axis digital readout by K&C with 12-month manufacturer's warranty and manual Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter conversion, quick zeroing, counting direction switch, >> 1 pc. NEW 3-jaw chuck 160 mm, 2 sets of jaws >> 1 pc. 4-jaw chuck 160 mm, 1 set of jaws >> NEW collet chuck and NEW collets from 2 to 24 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Fixed steady rest >> Machine feet For safety: electronic spindle guard, 2 emergency stop buttons, change gear housing with limit switch, spindle brake About this Machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new 3-axis digital readout by K&C makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our facility.

Stanje: dober (rabljeno), Leto izdelave: 1992, 1 rabljeni vodilno-vlečni stružni stroj Proizvajalec: Weiler Tip: Condor B Leto izdelave: 1992 Tehnični podatki: Razdalja med konicama: 750 mm Višina konic: 165 mm Vretenina odprtina: 40 mm Število obratov: 22 – 2800 obr/min Konjiček: MK 3 Pogonska moč: 1,6 / 3,2 kW Hfjdsw Rcd Sopfx Ah Dsn Teža: 1040 kg Dimenzije: 1.850 x 880 x 1.290 mm Opremljen z: 3-osni digitalni prikazovalnik Tročeljustna vpenjalna glava Zaščita vpenjalne glave