Weiler Condor 81 nakup rabljenega (203)

Stanje: dober (rabljeno), Lead and feed screw lathe WEILER LZ330 from educational institution - Swing over bed: 330 mm Hnedpfx Ahswndcfe Dsu - Swing over cross slide: 165 mm - Turning length: 800 mm - Spindle bore: 36 mm - Speed range: 25-2800 rpm - Automatic longitudinal / cross feeds - Multifix quick-change toolpost with holders - Drive power: 3 kW - Collet chuck system + 20x collets - 3-jaw chuck - 4-jaw chuck - Faceplate - Chip guard (rear) - Various accessories - Documentation Dimensions: LxWxH 1.8 x 0.7 x 1.6 meters / Weight: 750 kg Errors and omissions excepted.

Stanje: dober (rabljeno), Razdalja med konicama: 450 mm Hnedow I A Uxspfx Ah Deu Višina konic: 120 mm Vreteno izvrtina: 23 mm Število vrtljajev: 40 – 3000 min⁻¹ Brezstopenjski pogon s 3 predstopnjami in digitalnim prikazovalnikom števila vrtljajev Nasadni konjiček: MK 2 Pogon: 1,5 kW Teža: 350 kg Dimenzije: 1200 x 650 x 1330 mm Barva: Resedino zelena RAL 6011. Digitalni prikazovalnik: Po želji ob doplačilu Dodatna oprema: Dodatna oprema na zahtevo

Stanje: dober (rabljeno), Izvor iz šole Lepo kompletno s pripomočki Podrobnosti premer struženja: 300 mm dolžina struženja: 430 mm premer nad posteljico sani: 160 mm premer struženja nad posteljico sani s T-utorom: 135 mm razdalja med konicama: 470 mm višina konice: 145 mm širina posteljice: 205 mm število hitrosti struženja: 18 hitrosti: 30 - 3550 1/min hitrosti: 15 - 3550 1/min število podaj: 90 pode: 0,02 - 2,0 mm/obrat teža obdelovanca v podporah max: 25 kg Hjdpfx Ahsw Ryhns Dsnu teža obdelovanca brez podpor max: 80 kg teža stroja cca 0,9 t glavna priključna moč: 3,5 kW dimenzije stroja cca 1475 x 795 x 1300 mm premer pinole: 40 mm gib pinole: 85 mm krmilna enota: konvencionalna

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Fiksna luneta za stružnico WEILER E 50 v zelo dobrem stanju. Objemni razpon: 10 - 150 mm. Hnsdpfx Ahotx Avks Dsu

Leto izdelave: 1977, Stanje: rabljeno, Weiler Matador lathe, year of manufacture approx. 1977, three-jaw chuck, Multifix quick-change toolpost. The machine is in operational condition and can be demonstrated under power by prior arrangement. Hnodpsnkad Ssfx Ah Dju

Stanje: rabljeno, številka stroja/vozila: 1717, used lead and feed screw lathe WEILER PRAKTIKANT Centre height: 140 mm Centre distance: 500 mm Spindle bore: 36 mm Spindle speeds: 42–2,000 rpm Equipped with RSF 3-axis digital readout, 1 piece 3-jaw chuck Ø160 mm, Chuck guard with electrical interlock, Multifix tool post size A with 3 holders Lever-operated collet chuck system with 15 collets. Hnodpfeuqb Emex Ah Dou The machine is located at our site in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible.

Stanje: novo, Lead & Screw-Cutting Lathe WEILER COMMODOR 180 GSD - New machine / Exhibition machine / Unused - 3-axis digital readout - CE marking - Center height: 180 mm - Distance between centers: 1000 mm - Bar capacity: 56 mm - Swing over bed: 380 mm - Swing over cross slide: 215 mm - Spindle speed range: 25 - 2000 rpm - Automatic longitudinal / cross feeds - Thread cutting: Metric / Imperial / Diametral - Tailstock taper: MT4 - Tailstock quill travel: 150 mm - Coolant system - Multifix quick-change toolpost with insert - 3-jaw chuck, 200 mm - Work lamp - Chip guard (rear) Hnsdpfx Ahowucv Ro Dou - Documentation Dimensions: LxWxH 2.4 x 1.4 x 1.7 meters / Weight: 1700 kg Subject to errors and omissions.

Leto izdelave: 1995, Stanje: pripravljen za uporabo (rabljen), Various metalworking machines are available: 1) Larger guillotine shear BBM, year of manufacture: 1995. 2) Spot welding machine Nimak, year of manufacture: 1990s. 3) Circle cutting machine Schwartmanns, year of manufacture: 1987. 4) Smaller lathe Weiler, year of manufacture: 1966. 5) Table stud welding unit Soyer, year of manufacture: 2000s. 6) Free-standing bench grinder. 7) Deburring machine KSM, year of manufacture: 1980s. 8) Larger hydraulic press TOX, year of manufacture: 1990. 9) Hydraulic press TES 15, year of manufacture: 1972. 10) Single-column bench press, year of manufacture: 1955. 11) Pull-off machine Landert. Hsdpfx Ahewpkzqj Dsnu An on-site inspection is possible.

Stanje: rabljeno, Leto izdelave: 1982, Swing diameter over bed: 297 mm Swing diameter over cross slide: 160 mm Turning length: 500 mm Distance between centers: 500 mm Spindle speed: 15 – 3550 rpm Spindle nose size: 5 (DIN 55022) Hedjvxwlpspfx Ah Dsnu Spindle bore: 36 mm Tailstock quill taper: MT 3 Tailstock quill travel: 90 mm Tailstock offset: 500 mm Motor speed: 1440 / 2830 rpm Motor power: 3 / 2.2 kW Weight: 0.8 t Space requirements (approx.): 1.40 x 0.70 x 1.20 m Chuck guard with electrical interlock Tool cabinet with various contents

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Ta stružnica Weiler Commodor prihaja iz tehnične šole, zato ima malo delovnih ur. Lahko uporabljena in ni bila močno obremenjena – čista, zanesljiva naprava z dolgo življenjsko dobo. Hodjw U Sx Hjpfx Ah Donu Dolžina struženja: 1.000 mm. Premer struženja nad ležiščem: 380 mm. Premer struženja nad prečnim suportom: 190 mm. Število vrtljajev vretena: 25 – 2.000 min⁻¹. Število stopenj hitrosti: 18. Premer vretenaste luknje: Ø 56,0 mm. Vretenov konus: MK DIN 228 / MK 4. Vretenova prirobnica: DIN 55027 / velikost 6. Pomik rezkalne glave: 150 mm. Širina ležišča: 310 mm. Podaljšano podajanje – vzdolžno: 0,022 – 0,8 mm/obrat. Podaljšano podajanje – prečno: 0,011 – 0,4 mm/obrat. Napetost: 380 V. Skupna potrebna moč: 7,5 kW.

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Na prodaj je robusten in natančen cikelni stružnica WEILER E90 x 4500, letnik 1999, z velikim premerom vrtenja in cikličnim krmiljenjem – idealna za težke obdelovance do 6000 kg. Stroj je tehnično v dobrem stanju in je bil nazadnje v industrijski uporabi. Odličen je za posamično in maloserijsko proizvodnjo velikih komponent. Stroj ima ciklično krmiljenje, stabilno luneto in konjiček z velikim hodom pinole. Hnsdpfx Ahew Idx Ss Deu

Stanje: rabljeno, Leto izdelave: 1997, - 4-jaw face plate Ø 550 mm - 3-jaw chuck Ø 310 mm incl. 4 sets of hard base jaws, 1 set of hard top jaws, 8 sets of soft top jaws - fixed steady rest - live centre MK5 - Multifix B quick-change tool post incl. 10 tool holders - Operating hours: 32,582 h - Year of manufacture: 1997 - incl. operating manual and technical documentation Technical specifications: Working area: - Distance between centres: 1000 mm - Centre height: 280 mm - Swing diameter over bed: 570 mm - Swing diameter over cross slide: 340 mm - Bed width: 350 mm - Cross slide travel: 340 mm - Top slide travel: 140 mm - Cross slide length: 700 mm - Cross slide width: 220 mm - Bed guideway length: 560 mm - Turning tool cross-section (H x W): 32 x 25 mm Spindle: - Spindle nose as per DIN 55027: Size 8 - Spindle diameter in front bearing: 100 mm - Spindle bore: 66 mm - Main spindle internal taper: metric 70 Main drive: - Drive power 60% / 100% duty cycle: 15 / 11 kW - Max. torque at spindle: 1600 Nm - Overall speed range: 1 – 2500 rpm - Gear range I: 1 – 625 rpm - Gear range II: 4 – 2500 rpm Feed drive: - Type: three-phase servo drives - Feed range longitudinal and cross: 0 – 10 mm/rev - Longitudinal feed force: 9000 N - Cross feed force: 7000 N - Rapid traverse speed longitudinal/cross: 7 / 3.5 m/min Tailstock: Hnsdpsr Hrq Dsfx Ah Dju - Quill diameter: 70 mm - Quill stroke: 160 mm - Quill internal taper: MK5 Thread cutting range: - Metric threads: 0.1 – 250 mm - Inch threads: 1/4 – 56 TPI (G/1") - Module threads: 0.125 – 28 - DP threads: 1 – 224 Machine dimensions: - Dimensions (W x H x D): 2850 x 1750 x 1815 mm - Machine weight: 2950 kg

Stanje: dober (rabljeno), WEILER Praktikant 800R Lead and Feed Screw Lathe - Swing over bed: 300 mm - Swing over cross slide: 150 mm - Turning length: 800 mm - Spindle bore: 42 mm - Speed range: 40 - 2000 rpm - Automatic longitudinal and cross feeds - Thread cutting: metric / imperial - Tailstock taper: MT 3 - Motor power: 3 kW - Multifix quick-change toolpost with holders - Collet quick-clamping device incl. collets - Chuck guard Hnsdpfowl Rlbsx Ah Dsu - Chip guard at rear with work lamp - Emergency stop - Change gears - Live center - Drill chuck - Tool cabinet - Documentation Dimensions: LxWxH 1.8 x 0.8 x 1.6 meters / Weight 750 kg Subject to errors and omissions

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paintwork!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short-taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds: 0.03 - 0.15 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions (L x H x D): 1.2 m x 1.3 m x 0.65 m Accessories and Equipment: >> 1 piece 125 mm NEW 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck with collets from 3 to 26 mm in 1 mm increments, new About the Machine: Hsdpfxevivmye Ah Djnu For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All carriages run smoothly and evenly. The bed guides are in very good condition. The Primus was installed in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows you to achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see its condition for yourself.

Stanje: dober (rabljeno), WEILER Praktikant 800R / Conventional Centre Lathe Hedswp S Aiepfx Ah Donu - Swing over bed: 300 mm - Swing over cross slide: 150 mm - Turning length: 800 mm - Spindle bore: 42 mm - Speed range: 40–2000 rpm - Automatic longitudinal/feed and cross feeds - Thread cutting: metric/inch - Tailstock Morse Taper: MK3 - Three-jaw chuck - Multifix toolpost with holders - Chuck guard - Chip guard/rear panel with work light - Chip tray - Change gears - Tool cabinet - Documentation Dimensions: LxWxH: 1.8 x 0.8 x 1.6 meters / Weight: 750 kg Errors and omissions excepted.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout (K&C), Fully Refurbished to Factory Tolerances with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm Hedpfxsvrckqs Ah Djnu >> Spindle Bore: 56 mm >> Camlock Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Thread Cutting Capabilities: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: from 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake (switchable) >> Motor Power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer warranty with user manual Features: Conversion mm/inch, coordinate selection ABS/INC, value halving, reference mark, 200 tool programming slots, taper calculation, radius/diameter, one-touch zeroing, count direction switching >> 200 mm 3-jaw scroll chuck with soft jaws (almost new), 1 set of jaws >> Multifix size B with 2 tool holders, NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the Machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. The guideways have been newly ground and scraped. Inspection executed according to test protocol. 2K glossy white paint. The Multifix tool post and chuck are new. Safety features include a braked motor, electronic spindle guard, and two emergency stop switches, making this lathe in absolutely as-new condition. The machine runs very smoothly even at high spindle speeds. This latest generation of Weiler lathes is highly user-friendly and capable of producing ground-like surface finishes. You are welcome to inspect the machine under power on-site and verify its condition for yourself.

Stanje: dober (rabljeno), Lead and Feed Screw Lathe WEILER DA 260x1000 - Digital display – Three axes "NEW" - Centre height: 260mm - Swing over bed: 535mm - Swing over cross slide: 345mm - Distance between centres: 1000mm - Spindle bore: 71mm - Speed range: 33 - 1500 rpm - 12 spindle speeds via gearbox - Automatic longitudinal / cross feeds - Thread cutting: metric / imperial / diametral - Tailstock: Morse taper 4 - NEW THREE-AXIS DIGITAL DISPLAY - Drive power: 7.5 kW - Faceplate lead screw nut "NEW" - Multifix quick-change toolpost with insert - 350mm three-jaw chuck - 2 x emergency stop - Electric chuck guard "NEW" - Chip guard at rear - Coolant system - Drill chuck - Documentation Hnedpfswiztwox Ah Dsu Dimensions: LxWxH 2.7 x 1.5 x 1.7 meters / Weight: 1700kg Subject to errors and input mistakes.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus GS Lead and Feed Screw Lathe in Very Good Original Condition!!! Technical Specifications: >> Year of manufacture: approx. 1992, Machine No. 4549 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose DIN 4 >> Tailstock taper: MT2 >> Feeds from 0.03 to 0.15 mm/rev >> Capable of cutting metric, inch, module, and diametral pitch threads >> Metric thread pitch from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Features: >> New collet chuck system, new collets from 3 to 25 mm >> 1 three-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders Hjdpowkh Abjfx Ah Djnu About the Machine: For sale is a Weiler Primus GS lead and feed screw lathe in very good original condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The bed ways are in excellent condition. Even at high speeds, the Weiler runs very quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and enables ground-finish surfaces to be produced. Take the opportunity to inspect the machine under power on site and see its condition for yourself.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C, NEWLY Refurbished with acceptance protocol certifying tolerances to new-machine standards Technical Data: >> Machine No. 1824 >> Centre height: 180 mm >> Centre distance: 1,000 mm >> Spindle speeds: from 13 to 2,000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 size 5 Hedsvrcqdepfx Ah Djnu >> Tailstock: MT 4 >> Feeds: 0.026 to 0.888 mm/rev >> Threads possible: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.35 to 12 mm >> Weight approx. 1,500 kg >> Spindle brake switchable >> Drive power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer's warranty with operating manual Features: switching mm/inch, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, direction of counting selectable >> 3-jaw chuck with wedge bars, nearly new, 200 mm, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stop buttons Optional: Lead and feed screw covers About the Machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Certification to inspection protocol. Painted in 2K high-gloss white. All accessories, including Multifix and chuck, are new. Safety: The machine features a brake motor, electronic spindle guard, and two emergency stop buttons – making this an as-new lathe. The Weiler runs very smoothly even at high speeds. This newer generation of Weiler lathes is highly user-friendly and allows you to produce ground-quality surfaces. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus GS Lead and Feed Screw Lathe with 3-Axis Digital Readout Easson ES8 From training workshop – In excellent condition! Technical Data: • Year of manufacture: approx. 1990, machine no. 3768 • Centre height: 120 mm • Centre distance: 430 mm • Spindle speed: 60 – 3000 rpm in 18 gear steps • Spindle bore: 23 mm • Camlock spindle nose, DIN 4 • Tailstock: Morse taper 2 • Feeds: 0.03 to 0.15 mm/rev • Thread cutting: Metric, Inch, Module, and Diametral Pitch • Metric thread pitches: 0.25 to 2.5 mm • Weight: approx. 360 kg • Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: • 3-axis digital readout by Easson ES8 • Collet chuck system from 1 to 20 mm, collets in 1 mm increments with chuck and draw tube • 1 three-jaw chuck with 2 sets of jaws • 1 four-jaw chuck with 2 sets of jaws • Multifix size A with 3 tool holders • Bed stop • Facing attachment About the machine: Offered is a Weiler Primus lead and feed screw lathe, year approx. 1990, in outstanding condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The bed ways are in excellent condition. Even at high spindle speeds, the Weiler runs quietly. The machine comes from a large company’s training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surface finishes comparable to grinding. Take the opportunity to inspect this machine under power on site and see the condition for yourself. Hnedpfxsvkfhpj Ah Deu

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160 B Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout K&C Hnjdpfx Ahjwv S Ufs Deu Excellent Condition!! Technical Specifications: >> Year of manufacture: 1991, Machine No. 91-160-2804 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short-taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.02 - 0.63 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch threads >> Metric thread pitches: 0.25 - 8 mm >> Weight approx. 680 kg >> Spindle brake, switchable >> Length: 1.6 m, Height: 1.25 m, Depth: 0.7 m Accessories and Features: >> NEW K&C 3-axis digital readout, 12 months manufacturer's warranty, user manual included Functions: mm/inch switchable, coordinate selection ABS/INC, display value halving, reference point, 200 tool memory, taper calculation, radius/diameter, quick zeroing, counting direction switch >> Quick-clamping device, collets from 1 to 29 mm in 1 mm increments >> NEW 160 mm 3-jaw chuck with jaws >> Multifix size A with 2 toolholders >> Electronic chuck guard >> Bed stop >> Rear splash guard >> Machine feet >> Coolant system About the Machine: Offered here is a Weiler Praktikant 160 B lead and feed screw lathe, with toolmaker accuracy, in very good condition. The machine is, of course, fully functional. The machine has been completely disassembled and repainted in light grey. All slides move very smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly, and allows you to produce ground-like surface finishes. Take advantage of the opportunity to inspect this machine under power on-site and see its condition for yourself.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Data: Hsdpfx Aovv Etvsh Djnu >> Year of manufacture: approx. 1970, Machine No. M1012 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: 30 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MT 3 >> Feeds from 0.010 to 1.184 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 15 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> Collet chuck system with 32 collets (set is incomplete) and mount >> 1 three-jaw chuck including a set of jaws >> 1 four-jaw chuck including a set of jaws >> Multifix size A with 2 tool holders >> Change gears >> Bed stop About the Machine: Offered is a used Weiler Matador VS-2 in fully functional condition. You are welcome to inspect the machine under power on-site to verify its condition for yourself.

Stanje: novo, Leto izdelave: 2022, obratovalne ure: 3 h, Funkcionalnost: popolnoma funkcionalen, Commodor 230 VCD Lathe - LIKE NEW CONDITION The Commodor series has set the standard for long-term precision for decades. These proven, high-quality, and powerful production lathes are designed for versatile use in industry, toolmaking, trade, and vocational training. Features: - Distance between centers: 1000 mm - Center height: 230 mm - Automatic handwheel disengagement - Leadscrew and feed rod cover - Hold brake - Toolmaker's accuracy according to DIN 8605 - Frequency inverter and speed potentiometer for stepless speed control - High drive power on the main spindle - Wide threading range - Digital speed display - User-friendly operation - LED machine light WORKING AREA - Center height: 230 mm - Swing over bed: 475 mm - Swing over cross slide: 270 mm - Distance between centers: 1,000 mm SPINDLE - Spindle nose DIN 55027 / DIN ISO 702-3: Size 6 - Spindle bore: 56 mm - Spindle diameter at front bearing: 90 mm MAIN DRIVE - Drive power 60%/100% duty cycle: – / 11 kW - Speed range: 25 – 2,000 rpm - Number of speeds: stepless FEED RANGE - Number: 320 - Longitudinal: 0.026 – 7.4 mm/rev - Cross: 0.013 – 3.7 mm/rev THREADING RANGE - Metric threads: 0.3 – 80 mm TAILSTOCK - Quill diameter: 70 mm - Quill stroke: 150 mm - Internal taper DIN 228: MK 4 Hodsv Tv R Hepfx Ah Dsnu ACCEPTANCE ACCURACY: DIN 8605 WEILER VCD series digital display with constant cutting speed (V-constant) - 3-axis display for bed, cross, and top slide - Direct input and display of spindle speed - Constant cutting speed - Freely selectable maximum speed (lockable via key switch) - Oriented spindle stop - Tool technology memory for 99 tools - Power display in percent (graphic) and kW - Deactivation of axis displays via key switch (for training purposes) Accessories: - 250 mm three-jaw chuck RÖHM DURO-M, DIN 55027 - Fixed steady rests - 5 Multifix tool holders (size B) - Moveable chip splash guards - Digital position indicators About this machine: For sale is a Weiler Commodor 230 VCD lathe in LIKE NEW condition. The Weiler has just 3 spindle hours. The machine is CE-compliant. Take the opportunity to view and test this machine under power on site.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Bench Lathe – Excellent Condition !!! Technical Data: >> Machine No. 2801 >> Center Height: 120 mm >> Distance Between Centers: 430 mm >> Spindle Speed: 60 - 3000 rpm in 18 gear steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 55027 >> Tailstock Morse Taper: MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 2.5 mm >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 pc Röhm 125 mm three-jaw chuck with 4 sets of jaws >> Collet system with collets from 2 mm to 12 mm in 1 mm increments, including drawbar >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle guard >> Clamping tools About the Machine: Offered is a Weiler Primus lead and feed screw bench lathe in very good condition. The machine is, of course, fully functional. All carriages move very smoothly and evenly. The Weiler runs quietly, even at high spindle speeds. This Primus comes from a government facility where it saw little use. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. Take the opportunity to inspect the machine under power on site and convince yourself of its condition. (The base cabinet is included; the machine is not bolted to it.) Digital readout available at additional cost. Hodpfev Tyzcjx Ah Dsnu

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Specifications: - Year of manufacture: approx. 1985, Machine no. 1191 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose KK4 DIN 55027 - Tailstock taper: MK 2 - Feeds: 0.03 to 0.15 mm/rev - Thread cutting: Metric, Imperial, Module, and Diametral Pitch - Metric threads from 0.25 to 2.5 mm pitch - Weight approx. 360 kg - Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: - 1 pc. 3-jaw chuck 125 mm with 2 sets of jaws - Collet chuck with 18 collets - Multifix size A quick-change toolpost with 3 holders - Stop - Electronic spindle guard About the Machine: Hnodpfxevtp Eds Ah Dou Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-quality surfaces. Take the opportunity to inspect the machine under power on-site and see its condition for yourself.