Weiler 220 nakup rabljenega (181)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 83 mm, premer struženja: 570 mm, premer nihanja nad prečnim premičnikom: 340 mm, višina središča: 280 mm, največja hitrost vretena: 2.500 obr/min, Stroj je zaradi svoje masivne zasnove primeren za težja stružna in serijska dela! Godpfxjymx N Nj Ad Ajip TEHNIČNE PODROBNOSTI Območje vrtljajev: 1 – 2.500 min⁻¹ Navor: 1.300 – 1.600 Nm Premer vrtenja nad posteljo: 570 mm Premer vrtenja nad suportom: 340 mm Višina konice: 280 mm Razdalja med konicama: 2.000 mm Vretenina izvrtina: 83 mm (opcijsko 128 / 165 mm) Število mest v revolverski glavi: 8 Priklop revolverske glave: VDI 40 Premer pinole konjička: 80 mm Notranji stožec konjička: MK5 PODROBNOSTI O STROJU Model krmilnika: WEILER SIEMENS 810D Glavna moč motorja: 20 / 17 kW (60 % / 100 % ED) Dimenzije & Teža Dimenzije (D x Š x V): 3.850 mm × 1.850 mm × 1.750 mm Teža stroja: 4.200 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 8.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 750 mm, premer struženja: 330 mm, izvrtina vretena: 41 mm, največja hitrost vretena: 4.500 obr/min, hitrost vretena (min.): 1 obr/min, moč vretenovega motorja: 11.000 W, premer tulec: 50 mm, poteza s peresom: 110 mm, premer struženja nad ležiščem sani: 435 mm, skupna masa: 1.400 kg, višina središča: 165 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, For sale is a cycle-controlled WEILER E30X750 CNC lathe (year 2007) equipped with Siemens 810 D control system. Key facts: Manufacturer/Model: WEILER E30x750 Year of manufacture: 2007 Control system: Siemens 810 D Condition: fully functional, ready for immediate use Location: Austria (Graz) Inspection: on-site or via video call by arrangement Machine on-hours (powered): 26,492 h (Operating hours are significantly lower! Typically, actual spindle run time (real turning) accounts for only about 30% to 50% of this, i.e., approx. 8,000 to 13,000 hours.) Electrical connection: 400 V Technical data: Working area Centre height: 165 mm Swing over bed: 330 mm Swing over cross slide: 160 mm Distance between centres: 750 mm Main spindle Spindle head DIN 55027 / DIN ISO 702-3: size 5 Spindle bore: 40.5 mm Spindle diameter at front bearing: 70 mm Max. spindle torque: 180 Nm Main drive Drive power 100% / 60% DC: 9 / 11 kW Speed range: 1–4,500 rpm Number of speeds: stepless Feed / Rapid traverse Feed drive: three-phase AC feed drives Feed range (stepless): Longitudinal: 0.001–50 mm/rev (additional info: also specified 0–20 mm/rev) Cross: 0.001–50 mm/rev Feed force: Longitudinal: 6,000 N Cross: 3,000 N Max. rapid traverse speed longitudinal/cross: 8 / 4 m/min (additional info: also specified 10 / 7.5 / 5 / 3.5 m/min) Thread cutting range Metric threads: 0.1–2,000 mm Giodpfx Adovphv Tj Aep Inch threads: 112–1/64 TPI Tailstock / Quill Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MK 3 Accuracy Acceptance accuracy: DIN 8605 Dimensions / Weight Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1800 × 1350 × 1700 mm Note: Original price was €97,000. Interested? Contact us for further information and to arrange a viewing appointment.

Stanje: rabljeno, Leto izdelave: 2002, Premer struženja 240 mm Dolžina struženja 530 mm Krmilje Siemens 810 D Powerline Premer vrtenja 560 mm X-pomik 207,5 mm Z-pomik 530 mm Hitrost vrtenja 6000 vrt/min 12 kosov Skupna potrebna moč --- kW Teža stroja ca. 6,1 t CNC stružnica WEILER DZ 45 CNC, različica T3/T4 - 2008 - SIEMENS 810 D Powerline X-pomik 207,5 mm Z-pomik 530 mm Maks. premer struženja 240 mm Maks. premer vrtenja 530 mm Revolver za orodja z 12 mesti Gjdpfxoycxibo Ad Ajip Največja hitrost vrtenja 6000 vrt/min Obratovalne ure ca. 1.509 ur.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Weiler E50 x 1000 Precision Lathe (2003) Manufacturer: Weiler Model: E50 x 1000 Gisdsyucf Rspfx Ad Aop Year of manufacture: 2003 Condition: Good, used, under power Operating hours: 43,000 h Technical data: See images. Scope of delivery: - Original documentation - Rota S Plus 250-62 - Steady rest - Parat 4-position tool turret

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant VC Precision Lathe Manufacturer: Weiler Model: Weiler Praktikant VC Precision Lathe Year of manufacture: 2008 Condition: Used, very good, serviced and inspected with factory test report Technical Specifications Turning diameter: 250 mm Turning length: 650 mm Centre height: 160 mm Swing diameter over bed carriage: 320 mm Maximum swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Drive power – main spindle: 10 / 6.0 kW Number of gear stages: 1 Gijdoyucd Tspfx Ad Aop Spindle nose: 5 / DIN 55027 Spindle bearing diameter (front): 70 mm Spindle bore: 40 mm Usable bar capacity: 40 mm Toolpost: System: MultiFix B Turning tool shank cross-section: 20 x 20 mm Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inch: 80-2 1/” Module: 0.25 – 4 mm Travel paths: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel range: 180° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirement: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC Precision Lathe – Machine lamp – Documentation – 3-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool set

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Matador VC Stopenjsko nastavljiva hitrost vrtenja 25 - 2000 s digitalnim prikazom hitrosti 3-osna digitalna meritev Območje struženja 280 x 500 Gjdpfx Adeyuqb To Ajip Premer vretena 36 Konjiček MK 3 3- in 4-čeljustna glava Röhm 160 Hitrovpenjalna vrtalna glava, rotirajoča konica Nastavek za vpenjalne tule s tulemi Multifix A s 4 nosilci Elektronsko nadzorovana zaščita glave, tipka za izklop v sili Stanje: zelo dobro, miren tek in vodila brezhibna Testno struženje: 100 mm v zraku, natančnost 0,015 mm Mere: D 1,45 m, V 1,25 m, Š 0,65 m Teža: cca 650 kg Možen ogled pod napajanjem Brezplačno naloženo v D - 88433 Schemmerhofen.

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, CNC stružnica Weiler DZ 45 Leto izdelave: 2008 Godpfxoyayc Ds Ad Asip Krmiljenje: Siemens 840D / Shopturn Ročno natovarjanje do D 220 mm Prehod materiala: 42 mm Maksimalna dolžina struženja: 450 mm Vrtljaji vretena: 6300 obr/min Obdelava Revolver z 16 pogonskimi orodji X/Z/Y / C-os Vpenjalna glava za vpenjalne tule

Stanje: zelo dobro (rabljeno), Swing diameter over bed: 410 mm Centre distance: 1,000 mm Spindle speeds: 4–3,000 rpm Control: WEILER Giedpfjk D S Rqex Ad Aop Various accessories MARCELS MASCHINEN CH

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Premer struženja 410/440 mm Dolžina struženja 950 mm Krmiljenje Siemens / Weiler D2 Največja teža obdelovanca 900 kg Vretenasta glava Gr 6 MK 6 Premer vretenine 54 mm Prečni pomik 230 mm Premer pinole MK 4 mm Hod pinole 120 mm Višina konice 200 mm Gsdpfx Aoyrh Apjd Asip Največji navojni korak v mm 0,1 - 250 mm Vretenaste hitrosti - brezstopenjske 1 - 3000 min⁻¹ Skupna potrebna moč 12 kW Teža stroja pribl. 2,1 t Prostorska potreba pribl. 2,3 x 1,5 x 1,8 m

Stanje: rabljeno, Torno paralelo WEILER modelo Praktikant 800R Nº de máquina: 3315 Año de fabricación: 1984 Distancia entre puntos: 800 mm Diámetro de giro sobre bancada: 280 mm Diámetro de giro sobre carro transversal: 160 mm Altura de centros sobre bancada: 140 mm Altura de centros sobre carro transversal: 80 mm Diámetro del husillo: 36 mm Avances: longitudinal y transversal Montaje del plato: cono corto DIN 55027 tam. 5, 4x M10 Cono interior del contrapunto: MK 3 Recorrido de la caña: 90 mm Velocidad del husillo: 42 - 2000 rpm Potencia del motor: 1 / 1,6 kW Tensión de alimentación: 380 Voltios, 50 Hz - Velocidades del husillo mediante 2 velocidades de motor y 8 rangos de caja - Plato autocentrante de 3 garras RÖHM ZS Ø 160 mm con 1 juego de garras escalonadas - Porta-herramientas de cambio rápido MULTIFIX tam. A con 3 casetes Gjdoyr R Dcspfx Ad Aeip - Parada de emergencia - Protector de plato abatible - Manual de instrucciones con esquema eléctrico Dimensiones L x A x H: 1900 x 700 x 1300 mm Peso: 560 kg Buen estado

Stanje: rabljeno, Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 573, premer struženja nad prečnim suportom: 340 mm, izvrtina vretena: 66 mm, stružna dolžina: 1.100 mm, širina na sredini: 1.000 mm, premer struženja nad ležiščem sani: 570 mm, premer nihanja nad prečnim premičnikom: 340 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, hod vretena: 200 mm, višina središča: 280 mm, hitro pomikanje X-os: 10 m/min, hitri pomik na osi Z: 10 m/min, širina postelje: 350 mm, skupna dolžina: 2.850 mm, skupna širina: 1.815 mm, skupna višina: 1.750 mm, teža obdelovanca (maks.): 250 kg, moč vretenovega motorja: 15.000 W, skupna masa: 3.050 kg, vrtljajska hitrost (min.): 1 obr/min, največja hitrost vrtenja: 2.500 obr/min, vrtilni moment: 1.600 Nm, potovalna razdalja osi X: 340 mm, pomik po osi Z: 1.100 mm, teža obdelovanca med konicami: 1.600.000 g, premer vretena: 100 mm, Premer struženja v izrezu: 600 mm, zunanji premer vpenjalne glave: 315 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Weiler E50 je visokokakovosten konvencionalni precizni stružnica nemškega proizvajalca Weiler. Pogosto se uporablja v orodjarstvu, strojništvu, učnih podjetjih ter za popravila in izdelavo posameznih delov. Stroj odlikuje zelo robustna lita konstrukcija, natančna vodila in visoka natančnost krožnega teka. Zaradi zmogljive glavne vretena in stabilne zasnove je primeren tako za natančno fino obdelavo kot za težja rezkalna dela. Ciklično upravljanje Navedena cena ne vključuje demontaže, pakiranja in pošiljanja. Prodaja iz skladišča, vmesna prodaja pridržana. Stroji se prodajajo v rabljenem stanju; vsakršna garancija in jamstvo sta izključena. Gisdpfx Adjyua Sho Asp

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1990, obratovalne ure: 51.392 h, skupna višina: 1.700 mm, skupna masa: 1.300 kg, This Weiler E30 was manufactured in 1990. A robust horizontal lathe featuring a spindle bore of 42 mm and a swing over bed of 330 mm. It supports a wide range of threading options, from metric to DP threads, and includes a Multifix tool post size B. Ideal for precise and versatile turning operations. Contact us for further details regarding this machine. Gsdpfx Adjyaimfs Aeip Additional Equipment • Multifix tool post size B installed • Fixed steady rest (option) clamping range: 15–100 mm • Travelling steady rest (option) clamping range: 10–85 mm • Collets from 3 mm (in 0.5 mm increments) • Tailstock with a MT3 taper Machine Advantages Technical Specifications • Drive power 100%/60% duty cycle: 9/11 kW • Max. spindle torque: 180 Nm • Total speed range: 1–4500 rpm • Feed drive: three-phase AC feed motor • Longitudinal feed range: 0–20 mm/rev • Rapid traverse longitudinal/cross: 10/7.5/5/3.5 m/min • Quill diameter: 50 mm • Quill stroke: 110 mm • Quill internal taper: MT3 Additional Information Swing over cross slide: 160 mm Bed width: 240 mm Cross slide travel: 180 mm Saddle guideway length: 395 mm Tool section (height/width): 20 × 20 mm Spindle nose according to DIN 55027 size 5 Front bearing spindle diameter: 70 mm Main spindle internal taper: MT5 Workpiece: Metric thread pitch range: 0.1–400 mm Imperial thread pitch range: G/1" 1/4–56 Module thread range: mm DP thread range: 1–224 G/" Maximum number of threads: 50 Dimensions Machine depth 1800 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, največja hitrost vretena: 2.500 obr/min, skupna višina: 1.785 mm, skupna masa: 3.850 kg, število osi: 2, This Weiler E50 was manufactured in 2009. It is a robust horizontal lathe featuring a swing diameter over bed of 570 mm and a spindle bore of 83 mm. The machine offers a bed width of 350 mm and a turning tool cross-section of 32 x 25 mm. Ideal for precise and efficient turning operations. Please contact us for more information about this machine. Machine Advantages Qualitative Advantages • Front spindle bearing diameter: 120 mm • Spindle bore: 83 mm • Main spindle taper: Metric 90 • Longitudinal and cross feed range: 0-20 mm/revolution • Longitudinal feed force: 10,000 N • Cross feed force: 7,000 N • Rapid traverse (longitudinal/cross): 10/7 m/min or 5/3.5 m/min • Metric threads: 0.1-400 mm • Inch threads: 1/4" - 56 tpi to 1" • Module threads: – Technical Advantages • Drive power (60% / 100% duty cycle): 20/17 kW • Max. spindle torque: 1,600 Nm • Gear range I: 1-625 rpm • Gear range II: 4-2,500 rpm • Bed width: 350 mm • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Tailstock quill taper: MK 5 • Tool cross-section (height/width): 32 x 25 mm • Spindle nose according to DIN 55027: Size 8 Giodpfxex D Ibbo Ad Asp Additional Information Machine still connected to power supply/ DP threads: 1 - 224/ Fixed steady rest clamping range: 12-150 mm / 120-270 mm/ Travelling steady rest clamping range: 12- mm/ The machine has been running efficiently in single-shift operation since purchase/ A chuck incl. hard and several sets of soft jaws as well as the tailstock can be supplied as accessories/ Related tools can be discussed in the event of an order. The machine’s footprint is 2.8m x 5.2m, which includes a 600mm operator area within the 2.8m depth/ All manuals are available. Dimensions Machine Depth: 3,250 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 22.491 h, največja hitrost vretena: 1.800 obr/min, potovalna razdalja osi X: 410 mm, moč vretenovega motorja: 37.000 W, skupna višina: 1.930 mm, skupna širina: 2.120 mm, skupna masa: 5.500 kg, največja dolžina izdelka: 4.250 mm, število osi: 2, Horizontal lathe from 2008. The Weiler E70 / 2000 features a swing-over bed of 720 mm and a maximum workpiece weight of 2,500 kg. It is equipped with a steady rest, tailstock, and faceplate, making it highly versatile. With a spindle speed range of 1 – 1,800 rpm and a robust main drive power of 37 kW, this machine is designed for precision. If you are looking for a high-quality lathe, you should consider the Weiler E70 / 2000 that we are offering for sale. Contact us for further details. • Working area and capacities: • Swing over bed: 720 mm • Swing over cross slide: 430 mm • Centre height: 360 mm • Distance between centres: 1,000 / 2,000 / 3,000 / 4,000 / 6,000 mm • Bed width: 480 mm • Maximum workpiece weight (unsupported): 2,500 kg • Maximum workpiece weight (with steady rest): 3,800 kg • Spindle and headstock: • Spindle bore (standard): 106 mm • Spindle bore (options): 128 / 165 / 216 / 262 / 317 mm • Spindle nose: DIN 55027 size 11 • Maximum spindle torque: 3,150 Nm • Feeds and travels: • Z-axis rapid traverse: 10,000 mm/min (10 m/min) • X-axis rapid traverse: 5,000 mm/min (5 m/min) • Feed force (Z): 20,000 N • Feed force (X): 10,000 N • Tailstock: • Quill diameter: 115 mm • Quill stroke: 225 mm • Taper: MK 6 (Morse taper) Giodpfxjyn Nxko Ad Ajp • Thread cutting capabilities: • Metric threads: 0.1–400 mm • Inch threads: 1/4–56 TPI • Module threads: 0.125–28 mm • DP threads: 1–224 DP • Operating hours: 22,491 h Additional equipment: • Steady rest • Tailstock • Faceplate

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, obratovalne ure: 9 h, This horizontal lathe was manufactured in 2009. It is a Weiler E 60x1000 featuring an 83 mm spindle bore and a swing diameter over bed of 640 mm. With a maximum torque of 1400 Nm and a speed range up to 2500 rpm, it is ideal for demanding turning operations. Recently overhauled, with renewed bearings and guides, it ensures high precision. Take the opportunity to acquire this Weiler E 60x1000 horizontal lathe. Contact us for further information about this machine. Additional Equipment • Tailstock spindle diameter: 100 mm / Tailstock quill travel: 200 mm / Tailstock quill taper: MK5 Machine Advantages Technical Advantages of the Machine • Distance between centers: 1000 mm / Center height: 320 mm / Swing diameter over bed: 640 mm / Swing diameter over cross slide: 405 mm • Cross slide travel: 380 mm / Bed saddle guideway length: 570 mm • Spindle head according to DIN 55025, size 8 / Spindle bore: 83 mm / Headstock spindle taper: metric 90 • Drive power 60% / 100% duty cycle: 20.5/17 kW / Max. spindle torque: 1400 Nm / Speed range gearbox stage 1: 0-800 rpm / Speed range gearbox stage 2: 0-2500 rpm • Overhaul included hardening and grinding of the bedways, grinding of tailstock guideways, as well as overhaul of bed and cross-slide unit. • Replaced and renewed: sliding surfaces, wedge bars, all wipers, belts, main spindle motor, safety devices, rotary switches, and lubrication system. • Weiler cycle control: 840D/SL1 Gjdpfx Adox D Ry Hj Aeip • Toolholder as per customer specification: Multifix size C or Parat size 3 Additional Information Machine overhauled in 2022, with cycle control. Optionally, a used 200 mm chuck can be supplied. A steady rest with 1 m center distance is not included in the scope of supply but can be ordered from the manufacturer at any time. As stated in your description, we offer our customers a choice of two different tooling systems: Multifix size C or Parat size 3. These are completely rebuilt, which is why no toolholders are included.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, moč vretenovega motorja: 45.000 W, skupna višina: 2.120 mm, skupna masa: 11.500 kg, proizvajalec krmilnikov: SIEMENS, model krmilnika: 810 D, največja dolžina izdelka: 5.400 mm, število osi: 2, This Weiler E120x3000 was manufactured in 2001. It features a center distance of 3000 mm, a center height of 600 mm, and a swing diameter over bed of 1200 mm. The spindle bore is 165 mm, and it offers a robust main drive with a power output of 45/37 kW. The machine is ideal for heavy-duty turning operations and is supplied with accessories including a chuck, faceplate, and steady rest. Please contact us for more information about this machine. • Working area: • Distance between centers: 3000 mm • Center height: 600 mm • Swing diameter over bed: 1200 mm • Swing diameter over cross slide: 830 mm • Cross slide travel: 590 mm • Bed slide guide length: 860 mm • Turning tool cross-section (H x W): 40 x 40 mm • Tool holder: Parat size 4 • Spindle: • Spindle nose DIN 55027 / 55026, size 15 • Spindle bore: 165 mm • Main spindle taper: metric 171 • Main drive: • Drive power (60% / 100% duty cycle): 45 / 37 kW • Max. spindle torque: 8000 Nm • Speed range, gearbox stage 1: 1-280 rpm • Speed range, gearbox stage 2: 4-900 rpm • Tailstock: • Quill diameter: 140 mm • Quill stroke: 300 mm • Quill internal taper: MK 6 Godpfox D Hz Tex Ad Asip • Machine dimensions and weight: • Overall length: 5400 mm (without chip conveyor), 6535 mm (with chip conveyor) • Overall width: 2600 mm • Overall height: 2120 mm • Machine weight: 11,500 kg • Overhaul works: • Hardening and grinding of all bed ways • Grinding of tailstock guides • Overhaul of complete bed and cross slide unit (grinding/scraping of all guides) • Renewal of the bed slide's sliding surface • Renewal or shimming of keyways and floor guides • Renewal of all wipers • Replacement of all belts • Overhaul of the main spindle assembly in the headstock • Renewal of X-axis including bearings • Renewal of Z-axis including bearings • Overhaul of the tailstock quill (regrinding MK 6 taper), replacement of spindle and nut • Adjustment of the tool system • Replacement of main spindle motor • Inspection of auxiliary motors (X and Z-axes) • Overhaul of existing safety guards (sliding cover/claw protection) • Replacement of all rotary, tilt, and limit switches • Replacement of spindle and handwheel encoders • Renewal of flexible cables and coolant hoses in the work area • Replacement of the central lubrication system • Renewal of energy chains • Painting according to specification (standard structural basalt and light grey) • Installation and geometric inspection of the machine as per DIN 8605 Additional equipment • 1x used chuck Ø630 mm with various jaws • 1x used faceplate Ø1100 • 1x used steady rest, max. Ø300 • 1x used chip conveyor

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, premer struženja: 300 mm, višina središča: 150 mm, skupna masa: 800 kg, Brez najmanjše cene – zagotovljena prodaja najvišji ponudbi! Oddaja ponudbe zavezuje k pravočasnemu prevzemu bodisi med 11.05.2026 in 13.05.2026 bodisi med 18.05.2026 in 21.05.2026! TEHNIČNI PODATKI Giodpfeym N A Hox Ad Aep Premer vrtenja nad posteljo: 300 mm Premer vrtenja nad suportom: 200 mm Višina konice nad posteljo: 150 mm Višina konice nad suportom: 100 mm Dolžina med konicami: 500 mm Premer vretena: cca 28 mm PODROBNOSTI STROJA Mere in teža Dimenzije (D x Š x V): 1.400 x 700 x 1.600 mm Teža: 800 kg OPREMA Multifix nosilec stružnega orodja Štirikrako vpenjalno glavo (Ø 130 mm) Digitalni prikazovalnik proizvajalca HEIDENHAIN Zunanja referenca: Mahle

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, premer struženja: 300 mm, višina središča: 150 mm, največja hitrost vretena: 2.800 obr/min, skupna masa: 1.030 kg, Aucun prix minimum – vente garantie à l’enchérisseur le plus offrant ! La soumission d’une offre vous engage à un enlèvement dans les délais soit entre le 11/05/2026 et le 13/05/2026, soit entre le 18/05/2026 et le 21/05/2026 ! Gjdpfxjym N Aas Ad Asip DÉTAILS TECHNIQUES Diamètre de tournage au-dessus du banc : env. 300 mm Diamètre de tournage au-dessus du chariot transversal : 200 mm Hauteur de pointe au-dessus du chariot transversal : 100 mm Hauteur de pointe au-dessus du banc : 150 mm Longueur entre pointes : 750 mm Passage de broche : env. 35 mm Vitesse de broche : 40 - 2 800 tr/min DÉTAILS DE LA MACHINE Tension de service : 380 V Puissance absorbée : 3 kW Courant nominal : 25 A Fréquence : 50 Hz Dimensions et poids Dimensions (L x l x H) : 1.860 x 700 x 1.800 mm Poids : 1.030 kg ÉQUIPEMENT Contre-pointe Porte-outil Multifix type B Mandrin 3 mors (diamètre : 160 mm) Visualisation numérique 2 axes du fabricant RSF Référence externe : Mahle

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, premer struženja: 340 mm, višina središča: 170 mm, največja hitrost vretena: 2.800 obr/min, skupna masa: 800 kg, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! Giedpoym Nz Njfx Ad Aop Oddaja ponudbe vas zavezuje k pravočasnemu prevzemu bodisi med 11. 05. 2026 in 13. 05. 2026 bodisi med 18. 05. 2026 in 21. 05. 2026! TEHNIČNI PODATKI Premer struženja nad posteljo: 340 mm Višina konice nad suportom: 100 mm Premer struženja nad suportom: cca 200 mm Razdalja med konicama: 750 mm Višina konice nad posteljo: 170 mm Hitrost vretena: 12 – 2.800 min⁻¹ Premer skozi vreteno: cca 38 mm PODROBNOSTI O STROJU Obratovalna napetost: 380 V Krmilna napetost: 220 V Priključna moč: 3 kW Nazivni tok: 6,25 A Frekvenca: 50 Hz Mere & Teža Mere (D x Š x V): 1.700 x 650 x 1.500 mm Teža: 800 kg OPREMA Konjiček Multifix nosilec stružnega noža Tročeljustna vpenjalna glava RÖHM (Ø 160 mm) Zunanja referenca: Mahle

Stanje: dober (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 192 mm, stružna dolžina: 600 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 48 obr/min, potovalna razdalja osi X: 150 mm, pomik po osi Z: 650 mm, skupna višina: 1.245 mm, skupna dolžina: 1.582 mm, skupna širina: 715 mm, skupna masa: 680 kg, Oprema: dokumentacija / priročnik, Weile Praktikant 160 B popolnoma funkcionalen in vzdrževan • Mitutoyo 3-osni digitalni izpisovalnik (KA-200 Counter) s shranjevalnikom orodij • Komplet vpenjalnih tulec od Ø1 mm do Ø29 mm Gisdpfxeyr Sctj Ad Ajp • 3-čeljustni vpenjalni tulec Röhm DURO-M 160 z mehkimi čeljustmi • Novi komplet nosilcev za navoje Akon s kompletom narezovalnih plošč • Svedrni vpenjalni glavi Albrecht Ø0-10mm in Ø1-13mm • Komplet svedrov Ø0,5-13mm • Različni držala za notranje in zunanje struženje s 5 Multifix držali tipa A • Celotna dokumentacija

Stanje: rabljeno, L + Z stružnica WEILER tip Condor 81 A Stroj. št.: 36553 Leto izdelave cca 1985 Razdalja med konicama: 750 mm Premer struženja nad posteljo: 330 mm Višina konice nad posteljo: 165 mm Premer struženja nad suportom: 180 mm Višina konice nad suportom: 90 mm Premer vretena: 40 mm Priklop čeljusti: kratki stožec DIN 55027 št. 5 Konica v konjičku: MK 3 Pomik puše konjička: 110 mm Hitrost vretena: 45 - 2800 vrt/min, 16 stopenj Pogonska moč: 3 kW Omrežni priklop: 400 Volt, 50 Hz - Hitrost vretena v 16 prestavah - 3-čeljustna stružna glava Ø 160 mm RÖHM z vrtalnimi in stružnimi čeljustmi - Hitromenjalni nosilec rezila Multifix velikosti B s 3 vložki - Avtomatski vzdolžni in frontalni pomik Godpfxjk S Ht Ae Ad Asip - Elektromehanska zavora vretena - Nujna zaustavitev - Rezervoar za hladilno tekočino s črpalko v podstavku stroja, brez napeljave do delovnega območja - Zložljiv varnostni pokrov čeljusti - Zaščita pred brizganjem - 1 kos vrtljiv centrirni koničnik - Električna shema in navodila za uporabo Mere D x Š x V: 1850 x 950 x 1400 mm Teža: 1100 kg Dobro stanje

Stanje: dober (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 160 mm, izvrtina vretena: 36 mm, premer struženja: 300 mm, višina središča: 150 mm, širina na sredini: 500 mm, skupna dolžina: 1.500 mm, skupna širina: 800 mm, skupna višina: 1.300 mm, največja hitrost vretena: 3.550 obr/min, hitrost vretena (min.): 15 obr/min, skupna masa: 1.000 kg, Konvencionalni precizni stružni stroj z vpenjalno napravo za klešče, višina konic 150 mm, razdalja med konicama 500 mm, premer izvrtine Ø 36 mm, 18 hitrosti vrtenja 15 - 3550 min⁻¹, motor 3 kW, oprema: naprava za hlajenje, vpenjalna naprava za klešče, 3-čeljustna glava, vrtalna glava, stružni konjiček, hitromenjalni držalo RAPID s 5 vložki, strojna svetilka, vzdolžni prislon, mere 150x80x130 cm, teža ca. 1000 kg. Godpfx Adex Urmlj Ajip

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor B - Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout from Training Workshop Technical Specifications: >> Year of manufacture: 1991 Machine no.: 91-1624 >> Centre height: 165 mm >> Distance between centres: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Spindle brake >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Accessories and equipment: >> 3-axis digital readout by Heidenhain >> 1 piece 3-jaw scroll chuck with one set of jaws Gsdpfoym Srqsx Ad Asip >> Toolpost with 7 tool holders >> Bed stop >> Machine feet >> Drill chuck >> Rotating centre >> Coolant system About the machine: For sale is a used Weiler Condor B lathe, year 1991, in very good condition. The machine is, of course, fully functional—a robust and high-performance lathe. This Weiler comes from a training workshop and has been very well maintained. The 3-axis digital readout from Heidenhain makes operation even easier and more precise. The machine has been electrically and mechanically checked by us, and a complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test the machine under power at our facility.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81, lead and feed screw lathe with Heidenhain 3-axis digital readout, from a training workshop Technical Data: • Year of manufacture: 1987, Machine no. 87-674 • Centre height: 165 mm • Centre distance: 750 mm • Spindle speeds: 22 to 2800 rpm • Spindle bore: 40 mm • Short taper spindle nose DIN 55027, size 5 with bayonet lock • Tailstock: Morse taper 3 • Feeds: 0.015 to 0.46 mm/rev • Thread types possible: metric, imperial, module, and diametral pitch • Metric thread pitches: 0.18 to 28 mm • Spindle brake • Weight: approx. 1100 kg • Spindle brake switchable • Dimensions (LxHxW): 1.83 m x 1.29 m x 0.88 m Accessories and Equipment: • Heidenhain 3-axis digital readout • 3-jaw chuck with wedge bar and 1 set of jaws • Quick-action collet system with collets from 1-29 mm in 0.5 mm increments • Toolholder with 7 pockets • Bed stop Giodsym Slwepfx Ad Aop • Machine feet • Drill chuck • Revolving centre • Coolant system About the machine: For sale is a used Weiler Condor 81 lathe, year of manufacture 1987, in very good condition. The machine is, of course, fully functional—robust and powerful. Coming from a training workshop, this Weiler has been very well maintained. The Heidenhain 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically tested by us, and a complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power on-site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout from Training Workshop Technical Data: >> Year of manufacture: 1990 Machine no. 90-1419 >> Centre height: 165 mm >> Distance between centres: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short-taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types possible: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.18 to 28 mm >> Spindle brake >> Weight approx. 1100 kg >> Spindle brake engageable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pc. 3-jaw chuck with wedge bars and 1 set of jaws >> Tool post with 7 tool holders >> Bed stop >> Machine feet >> Keyless drill chuck >> Live centre >> Coolant system Godsym Dczspfx Ad Asip About the machine: Offered is a used Weiler Condor B lathe, year of manufacture 1990, in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The Weiler comes from a training workshop and is very well maintained. The 3-axis Heidenhain digital readout makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our premises.