Weiler Condor 81 nakup rabljenega (203)

Stanje: pripravljen za uporabo (rabljen), Centre height: 165 mm, centre distance: 800 mm, turning diameter over bed/cross slide: 330 mm/185 mm, spindle bore: 40 mm, spindle speed: 2800 rpm, machine dimensions X/Y/Z: approx. 2000 mm/1000 mm/1700 mm, weight: approx. 900 kg. An on-site inspection is possible. Isdpfx Ahjwq R N Dj Doih

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Engine Lathe Model Condor B, Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout NEW Geometrically overhauled with inspection protocol for new machine tolerances! Technical Data: >> Machine No. 90-1495 >> Center height: 165 mm >> Center distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch Iiedpjvambcsfx Ah Deh >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Features: >> New K&C 3-axis digital readout, 12 months manufacturer's warranty with operation manual Functions: switching mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments >> 160 mm three-jaw chuck with 2 sets of jaws, NEW >> Multifix quick-change toolpost, size A, with 2 tool holders, NEW >> Bed stop >> Electric chuck guard NEW >> LED machine lamp NEW >> Rear safety cover >> Operating manual >> Coolant system >> Machine feet About the machine: For sale is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, like-new condition. All guides have been newly ground or hand-scraped. Delivered with a test protocol upon acceptance. This is an excellent machine with electronic spindle protection. All accessories such as collets, chuck, and Multifix toolpost are new. Spindles, spindle nuts, bearings, belts, and wipers have been replaced. Take the opportunity to inspect this machine under power at our site and convince yourself of its condition.

Stanje: rabljeno, Leto izdelave: 1980, Weiler Condor VS2 lathe with 3-axis Heidenhain digital readout, year of manufacture 1980, four-jaw chuck, Multifix quick-change toolpost with 3 holders. The machine is in very good, operational condition and comes from a training workshop. Can be demonstrated under power by appointment. Iijdpfxovx Sw He Ah Djh

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Universal lead and feed screw lathe Manufacturer: WEILER Model: Condor B Year of manufacture: 1989 - overhauled newly painted, RAL 7035 light grey Machine no.: 1401 with warranty Ijdpog R S Rcsfx Ah Djih Includes: - 3-axis digital readout FAGOR Innova 30i T, new - Chuck guard with electrical interlock, new - Quick-change tool post base unit, size B - Bed stop - Coolant system - Chip backsplash - Operating manual -Used, as seen-

Stanje: dober (rabljeno), Lead and feed screw lathe Weiler Condor VS 2 Technical Data: Centre height: 160 mm Centre distance: 800 mm Spindle bore: 40 mm Bed width: 240 mm Spindle speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock taper: MT 3 Quill stroke: 110 mm Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (W x D x H), approx.: 1930 x 880 x 1470 mm Equipment: Iodpfx Ahju E H Iws Deih 3-jaw chuck Quick-change toolpost system Multifix size A incl. 1 toolholder Electrically interlocked chuck guard Retrofitted brake motor Bed stop Emergency stop button Coolant system Machine lamp Chip guard at rear ELESTA 3-axis digital readout Rotating centre The machine has been technically inspected and is in very good condition. Backlash on cross slide: 0.2 mm Backlash on top slide: 0.15 mm Inspection under power possible at any time. Price net, ex-works, loaded from stock

Stanje: dober (rabljeno), Leto izdelave: 1996, Weiler lathe Type: Condor B Centre height: 165 mm Iijdpfxevbwd Re Ah Dsh Centre distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 185 mm Spindle nose: DIN 55027 size 5 Spindle bore: 40 mm Main spindle taper: Morse taper 5 (MK 5) Connected load: 3 kW Speed range: 22–2800 rpm Tailstock taper: Morse taper 3 (MK 3) Weight: 1040 kg 3-jaw chuck 4-jaw chuck Multifix B toolpost Live centre

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 180 mm, izvrtina vretena: 40 mm, premer struženja: 330 mm, premer struženja nad ležiščem sani: 330 mm, višina središča: 165 mm, stružna dolžina: 750 mm, poteza s peresom: 110 mm, največja hitrost vrtenja: 2.800 obr/min, vrtljajska hitrost (min.): 22 obr/min, moč: 5,5 kW (7,48 KM), Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Weiler Condor AC infinitely variable lathe Isdpfx Aoruqzcoh Djih

Stanje: rabljeno, Leto izdelave: 2002, Weiler E90 / 4.5M – CNC Lathe with Cycle Automation - Weiler D2 cycle control - Chip conveyor - Approx. 15 Multifix toolholders - 1 live center - Regular service performed by Weiler - Supplied without chuck, without steadies - Year of manufacture: 2002 Technical Data Working Area: - Distance between centers: 4500 mm - Center height: 450 mm - Swing over bed: 900 mm - Swing over cross slide: 530 mm - Bed width: 600 mm - Cross slide travel: 590 mm - Top slide travel: 250 mm - Cross slide length: 1230 mm - Cross slide width: 345 mm - Bed guideway length: 860 mm - Tool shank section (height/width): 40 x 40 mm Spindle: - Spindle nose to DIN 55027 / 55026 size: 11 - Spindle diameter in front bearing: 178 mm - Spindle bore: 128 mm - Main spindle Morse taper (metric): 140 mm Main Drive: - Spindle nose to DIN 55027 size: 11 - Total speed range: 1 – 1120 rpm - Speed range gear stage I: 1 – 350 rpm Iedpfx Ajxn Rr Reh Dsih - Speed range gear stage II: 4 – 1120 rpm - Drive power at 60% / 100% duty cycle: 45 / 37 kW - Max. torque at spindle: 6000 Nm Feed Drive: - Feed range Z/X: 0 – 20 mm/rev - Feed force Z/X: 20 kN - Rapid traverse speed Z/X: 7 / 3.5 m/min Tailstock: - Quill diameter: 140 mm - Quill stroke: 300 mm - Quill taper: MK 6 Thread Cutting Range: - Metric threads: 0.1 – 400 mm - Inch threads: 1/4 – 56 TPI - Module threads: 0.125 – 28 mm - DP threads: 1 – 224 DP Connection Data: - Operating voltage: 400 V - Control voltage: 24 / 230 V - Connected load: 55 kW - Rated current: 85 A Machine Dimensions: - Overall length: 6900 mm - Overall width: 2600 mm - Overall height: 2120 mm - Machine weight: 10,500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, Konvencionalni stružnica WEILER Praktikant 140 B Leto izdelave: 1985 Delovno območje: Višina med konicama: 140 mm Razdalja med konicama: 650 mm Obratovalni premer nad posteljo: 280 mm Obratovalni premer nad prečno desko: 190 mm Vreteno: Stožčasti nasad vretena: DIN 55027/DIN ISO 702-3 raz. 5 Premer izvrtine vretena: 43 mm Premer vretena v prednjem ležaju: 70 mm Glavni pogon: Moč pogona: 2,6 / 3,1 kW Območje vrtljajev: 48 – 2.500 min⁻¹ Število vrtljajev: 16 Podajalni obseg: Število: 24 Vzdolžni pomik: 0,02 – 0,63 mm/obrat Prečna deska: 0,006 – 0,2 mm/obrat Iodjxmf Nnjpfx Ah Doih Dimenzije (d x š x v): 1600 mm × 800 mm × 1300 mm Teža: pribl. 650 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 83 mm, stružna dolžina: 1.000 mm, premer struženja: 570 mm, premer struženja nad zgornjim sanežem: 340 mm, premer tulec: 80 mm, hod vretena: 200 mm, skupna masa: 3.200 kg, zunanji premer vpenjalne glave: 250 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Machine is in very good condition. Available immediately! Ijdpfjwxw S Ijx Ah Doih Can be tested under power.

Stanje: rabljeno, Leto izdelave: 2014, Turning length: 650 mm Swing diameter: 320 mm Centre height: 160 mm Swing diameter over cross slide: 190 mm Quill: MT 3 Spindle bore: 42 mm Spindle speed: 25–5000 rpm Distance between centres: 650 mm Operating hours: 637 h Total power requirement: 8 kW Machine weight: approx. 1250 kg Space required: approx. 1.6 x 0.5 x 1.7 m Lathe: Weiler Praktikant VC Plus, year of manufacture 2014 From test workshop, excellent condition! Iisdpjxn Txajfx Ah Djh Equipment: All 99 programmable tool positions can be individually set for feed and spindle speed or constant cutting speed. Feed and speed can also be controlled via potentiometer. Thread pitches are freely programmable and feature electronic end stops. Additional electronic stops can be set for length and diameter. No coolant system is available. 8" colour display Energy recovery system Accessories: The machine comes with a quick-clamping device including 30 collets ranging from 5 mm to 26 mm diameter, 3-jaw chuck by Röhm including 10 sets of soft jaws, centring tips, tailstock fittings (MT 3) for manual thread-cutting with taps and dies, 15 Multifix toolholders size A, Indexing head for Multifix mount for machining bolt circles, Spindle and bed stops, Tool cabinet with 12 drawers, Tool holders for internal and external machining, drills, reamers, Standard thread gauges up to M10, extensive documentation for operation and maintenance.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 7.690 h, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 560 mm, stružna dolžina: 530 mm, premer struženja: 240 mm, največja hitrost vretena: 5.000 obr/min, For sale: CNC lathe, brand Weiler, model DZ 65. The machine offers 12 driven tool stations and is in excellent condition with low operating hours. Package with accessories available for a total of €65,000. Technical data: Year of manufacture: 2014 Control: Siemens 840D SL Operating hours: 7,690 h Bed arrangement: 45° slant bed Work spindle center height above floor: 1130 mm X-axis travel: 207.5 mm Center face rest to tailstock: 745 mm Z-axis travel: 530 mm Turning diameter: 560 mm Nominal power at 1000 rpm: 27 kW Spindle speed range: 50–5000 rpm Torque: 260 Nm Max. chuck size: 200 mm Spindle bore: 77 mm Spindle diameter at front bearing: 120 mm Material passage through pressure tube: 65 mm Tailstock NC-controlled Tailstock quill mount: MT 4 Power: 4 MT Torque: 9.5 Nm Iodpjuxc Tcsfx Ah Deih Longitudinal travel: 525 mm Z-axis traverse: 530 mm X-axis traverse: 207.5 mm Z-axis rapid traverse: 30 m/min X-axis rapid traverse: 30 m/min Number of tools: 12 Tool shank cross-section: 20 × 20 mm Tool mounting: VDI 30 Dimensions: 3180 mm × 2050 mm × 2200 mm Weight: 6,300 kg Additional information: - Bar feeder hardware prepared but must be unlocked - Only chip tray delivered—chip conveyor available from Weiler - Equipped with belt skimmer - Offer does not include tool holders and collets; can be supplied upon request Transport and loading can be organized Europe-wide at additional cost upon request. All prices plus VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality, yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or to get in touch, please visit our website.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stružnica Weiler Primus v dobrem stanju. Letnik iz 80-ih, trivrata glava, Multifix. Stroj si je mogoče ogledati pod napetostjo. Ijdpfx Ahexn Sdbe Deih

Stanje: dober (rabljeno), izvrtina vretena: 28 mm, premer struženja nad ležiščem sani: 300 mm, premer struženja nad zgornjim sanežem: 200 mm, stružna dolžina: 500 mm, skupna dolžina: 1.400 mm, skupna širina: 700 mm, skupna višina: 1.600 mm, skupna masa: 800 kg, Equipped with: – Multifix toolpost – Four-jaw chuck (Ø 130 mm) Iiodpfx Ahowxq Iio Deh – Digital readout by HEIDENHAIN

Stanje: zelo dobro (rabljeno), Swing diameter over bed: 410 mm Centre distance: 1,000 mm Spindle speeds: 4–3,000 rpm Ijdpfx Ahjk D S Rqs Deih Control: WEILER Various accessories MARCELS MASCHINEN CH

Stanje: pripravljen za uporabo (rabljen), WEILER COMMODOR 230 / Heidenhain digitalni prikazovalnik Stroj izvira iz izobraževalne ustanove -CS - oznaka - Višina konic: 230 mm Razdalja med konicama: 1000 mm Premer vrtenja nad posteljo: 475 mm Premer nad suportom: 270 mm Prehod vretena: 56 mm Območje obratov: 25–2000 vrt/min Avtomatski vzdolžni / prečni pomiki Navojni / metrični / colski itd. Konjiček: MK 4 Tročeljustna vpenjalna glava: 200 mm Hitromenjalni nosilec z vložki Hladilna naprava Zaščita vpenjalne glave Zadnja stena proti ostružkom Delovna svetilka Zasilni izklop Nastavljive noge stroja Isdoxpilfjpfx Ah Deih Dokumentacija Dimenzije: D x Š x V: 2,5 x 1,5 x 1,7 m / Teža: 1800 kg Pridržujemo si pravico do napak ali tipkarskih napak.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik cycle control WEILER 840 D /SL 1 Year of manufacture: 2012 Spindle bore: 66 mm Distance between centers: 1000 mm Swing over bed: 435 mm Isdpfxswk I Ane Ah Deih Swing over cross slide: 200 mm Center height: 210 mm Speed range: 1 – 3,500 rpm stepless Includes the following accessories: Sliding guard with internal lighting 8-position SAUTER turret with AGW and driven tools C axis via main drive 3 driven tools VDI 30 3-jaw chuck FORKARDT Ø 250 mm 1 fixed steady rest Ø 120 mm Tailstock with extendable quill Coolant unit Coolant spray gun Chip collection tray 5 height-adjustable machine feet Operating manual THE MACHINE IS IN VERY GOOD CONDITION!! THE MACHINE WAS USED FOR TRAINING PURPOSES ONLY!! THE MACHINE HAS ONLY 9,044 SWITCHED-ON HOURS!!!

Stanje: rabljeno, številka stroja/vozila: 11756, Used lead and feed screw lathe WEILER LZ 280 Centre height: 125 mm Centre distance: 800 mm Spindle speeds approx. 26–2000 rpm Iiedpjvd Dbnofx Ah Dsh Includes: - 1 x three-jaw chuck Ø 125 mm with both internal and external jaws, brand new - Multifix size A with 2 tool holders - Emergency stop / switch unit, rear chip guard - All change gears available, driver plate - Tray, machine lamp, new power socket - 15 collets from Ø 3.5 to 18.5 mm, collet clamping tube - Fixed centre and MK 2 sleeve for clamping tube - Bed stop, chuck guard, various turning tools and operating manual Machine is located at our premises in 71334 Waiblingen-Beinstein and is immediately available. Inspection of the machine is possible by appointment.

Stanje: zelo dobro (rabljeno), Soustruh typu cyklického řízení Weiler E 50 / 1D Rok výroby: 1999 Číslo stroje: 684 Řízení: Weiler (Siemens 810D) Provozní hodiny: 43 543h (Stroj byl před několika lety repasován firmou Schmeißer) Technické údaje: Otáčky vřetena: 1–625 / 4–2500 ot/min (2 převodové stupně) Výkon pohonu: 17 kW Krouticí moment vřetena: 1 200 Nm Průchozí otvor vřetena: 66 mm Vzdálenost hrotů: 1 000 mm Výška hrotu: 280 mm Točný průměr nad ložem: 570 mm Točný průměr přes suport: 340 mm Vybavení/příslušenství: - Rozhraní pro externí programování - Nástrojový držák Parat včetně 6 držáků Isdpfxjwtqnrs Ah Doih - Provozní návod - Zařízení na chlazení - Různé soustružnické nože a vrtáky - Upínací čelisti pro sklíčidlo - Otočný hrot - Patky stroje Stroj byl odzkoušen pod proudem a je v bezvadném, okamžitě provozuschopném stavu. Lože stroje je také v dobrém stavu. Cena bez DPH, volně ložené ze skladu.

Stanje: dober (rabljeno), Leto izdelave: 1995, premer struženja nad ležiščem sani: 810 mm, premer nihanja nad prečnim premičnikom: 510 mm, poteza s peresom: 225 mm, premer tulec: 115 mm, višina središča: 400 mm, hitrost vretena (min.): 1 obr/min, največja hitrost vretena: 1.800 obr/min, širina postelje: 480 mm, skupna masa: 6.400 kg, vrtilni moment: 3.150 Nm, Tukaj vam ponujamo stružnico znamke "VOEST ALPINE" (WEILER) tip E80/3. Podrobnosti najdete v priloženem PDF-ju. Tam je navedena tudi obsežna dodatna oprema. Iiedjw Tq Tyspfx Ah Djh Lep pozdrav Podjetje Wiegand

Stanje: zelo dobro (rabljeno), Swing diameter over bed 330 mm Iiodjud Naqspfx Ah Deh Centre distance 750 mm Spindle speeds 1–4,500 rpm Control: WEILER C3 Various accessories MARCELS MASCHINEN CH

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2013, Cycle-Controlled Lathe WEILER E 40 With Siemens Sinumerik Cycle Control WEILER 840 D /SL 1 Year of manufacture: 2013 Spindle bore: 66 mm Centre distance: 1000 mm Swing over bed: 435 mm Swing over cross slide: 200 mm Centre height: 210 mm Speed range: 1 – 3,500 rpm, infinitely variable Comes with the following accessories: Safety sliding guard with interior lighting 8-position SAUTER turret 3-jaw chuck RÖHM Ø 200 mm Tailstock with extendable quill Coolant system Coolant spray gun Chip collection tray 5 height-adjustable machine feet Iiedpfx Ahswfm Tbj Djh Operating manual

Stanje: dober (rabljeno), izvrtina vretena: 66 mm, premer struženja nad ležiščem sani: 570 mm, premer nihanja nad prečnim premičnikom: 340 mm, poteza s peresom: 160 mm, premer tulec: 70 mm, višina središča: 280 mm, hitrost vretena (min.): 1 obr/min, največja hitrost vretena: 2.500 obr/min, skupna dolžina: 2.850 mm, skupna širina: 1.820 mm, skupna višina: 1.750 mm, skupna masa: 2.750 kg, vrtilni moment: 1.600 Nm, Tukaj vam ponujamo stružnico znamke "WEILER" tip E50x1000. Podrobnosti najdete v priloženem PDF-ju. Tam je navedena tudi obsežna dodatna oprema. S spoštovanjem, Iisdpfx Aew Trbfsh Doh Podjetje Wiegand

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1995, CNC Lathe WEILER “E 35” Equipped with 2 axes, Siemens Sinumerik 805 Year of manufacture: 1995 Spindle bore: 54 mm Distance between centers: 950 mm Swing diameter over bed: 410 mm Speed range: 4 – 3000 rpm Includes the following accessories: - PARAT tool holder with 8 inserts - Chuck guard - 3-jaw chuck Ø 200 mm - 4-jaw chuck Ø 200 mm Iedpfx Aheuzyw Ds Deih - Fixed steady rest 12 - 150 mm - Chip collecting tray - Rear chip protection wall with lighting - Coolant system - 4 height-adjustable machine feet - Operating manual

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2013, Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik cycle control WEILER 840 D /SL 1 Year of manufacture: 2013 Spindle bore: 66 mm Distance between centres: 1000 mm Swing Ø over bed: 435 mm Swing Ø over cross slide: 200 mm Centre height: 210 mm Speed range: 1 – 3500 rpm, stepless Iisdpfxsvkd Inj Ah Deh Supplied with the following accessories: Sliding guard with interior lighting Multifix tool holder with 8 inserts 8-position SAUTER turret with AGW and driven tools C-axis via main drive 3-jaw chuck Schunk ROTA plus Ø 250 mm 5 sets of soft top jaws, 1 set of hard top jaws Tailstock with extendable quill Reinforced coolant system, 5.5 bar Coolant spray gun Chip collection tray 5 height-adjustable machine feet Operating manual