Center stružnica

WEILER Condor

Stanje: dober (rabljeno), Interna številka artikla: 25101 LuZ stružnica Weiler Condor Iz poklicne šole! + Digitalni prikazovalnik Heidenhain ND530 + Obsežen paket dodatne opreme, sestavljen iz: Tročeljustna glava Röhm 160 (montirana) Štiriceljustna glava Klopfer 160 2x luneta MK5 konus z vrhom Set vpenjalnih klešč (20 kos) Multifix "B" osnovni nosilec z enim držalom za orodje Tekalna koničasta konica Različna menjalna kolesa Navodila za uporabo / električna shema / mehanska navodila Tehnični podatki: Razdalja med konicami: 800mm Višina osi: 160mm Konjičkov držalo: MK3 Prehod: 29mm Št. vrtljajev: 40 - 1650 min⁻¹ Cedpsx Dl Urofx Afqjaa Mere (D׊×V): 180 x 750 x 130cm Teža: ca. 800kg

Stanje: dober (rabljeno), Stružnica Leit & Zugspindel WEILER CONDOR - Originalni premaz - Višina konic 165 mm - Premer struženja nad posteljo 330 mm - Premer struženja nad suportom 170 mm - Razdalja med konicama 800 mm - Vrtljaji vretena 24 - 2800 obr/min - Avtomatski vzdolžni / prečni pomiki - Premer izvrtine vretena 38 mm - Konjiček MK 3 - Naprava za vpenjalne tule + 17x vpenjalnih tulcev - Trio-čeljustna glava - Multifix z vložki - Električna zaščita glave Csdpfx Aex A D Ubsfqsaa - Zadnja zaščita pred ostružki - Delovna svetilka - Razna dodatna oprema - Dokumentacija Mere: D x Š x V 1,8 x 0,9 x 1,6 metra / Teža 800 kg Pridržujemo si pravico do napak ali pomot

Stanje: dober (rabljeno), Leto izdelave: 1996, Weiler lathe Type: Condor B Centre height: 165 mm Centre distance: 750 mm Csdpfevbwd Rox Afqoaa Swing over bed: 330 mm Swing over cross slide: 185 mm Spindle nose: DIN 55027 size 5 Spindle bore: 40 mm Main spindle taper: Morse taper 5 (MK 5) Connected load: 3 kW Speed range: 22–2800 rpm Tailstock taper: Morse taper 3 (MK 3) Weight: 1040 kg 3-jaw chuck 4-jaw chuck Multifix B toolpost Live centre

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor B with Lead and Feed Screw, 3-Axis Digital Readout by K&C, NEW, CE Compliant! Technical Specifications: >> Machine No.: 2442, Year of manufacture: 1997 Codpfxsxcuazj Afqoaa >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 (MT 3) >> Feeds from 0.015 to 0.46 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and Features: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty with operating manual Functions: mm/inch conversion, coordinate choice ABS/INC, value halving, reference mark, tool programming (200 tools), taper calculation, radius/diameter, one-touch zeroing, count direction switching >> 1 piece new 3-jaw chuck 160 mm, 2 sets of jaws >> 1 piece 4-jaw chuck 200 mm, 1 set of jaws >> New collet chuck and new collets from 3 to 25 mm in 1 mm increments >> Multifix size B quick-change tool post with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear cover >> Machine feet Safety features: electronic spindle guard, 2 emergency stop buttons, change gear box with limit switch, spindle brake About the machine: Offered is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our premises.

Stanje: rabljeno, WEILER Engine Lathe Type Condor 81 A Machine No. 36553 Year of manufacture approx. 1985 Centre distance: 750 mm Swing over bed: 330 mm Centre height over bed: 165 mm Swing over cross slide: 180 mm Centre height over cross slide: 90 mm Spindle bore: 40 mm Chuck mount: Short taper DIN 55027 size 5 Tailstock taper: MK 3 Quill stroke: 110 mm Spindle speed: 45 - 2800 rpm, 16 steps Drive power: 3 kW Mains connection: 400 Volt, 50 Hz - Spindle speed via 16-step gearbox - 3-jaw chuck Ø 160 mm RÖHM with internal and external jaws - Multifix quick-change toolpost size B with 3 holders - Automatic longitudinal and face feed - Electromechanical spindle brake - Emergency stop Caodpfx Aok S Ht Aefqja - Coolant tank with pump integrated in the machine base, without supply line to the working area - Hinged chuck guard - Splash guard - 1 live centre - Electrical diagram and operating manual Space required (L x W x H): 1850 x 950 x 1400 mm Weight: 1100 kg Good condition

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Used L+Z Lathe with 3-axis digital readout Manufacturer: WEILER Model: Condor 81 B Machine No.: 87596 Year of manufacture: approx. 1987 Centre distance: 750 mm Swing over bed: Ø 330 mm Centre height over bed: 165 mm Swing over cross slide: Ø 180 mm Centre height over cross slide: 90 mm Spindle bore: Ø 40 mm Tailstock taper: MK 3 Quill travel: 110 mm Spindle speed: 45 - 2800 rpm (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (main motor speed 1+2) Power supply: 400 Volt, 50 Hz Connected load: 32 kW Control voltage: 42 Volt Equipment & Accessories: - 3-axis digital readout (Heidenhain VRZ 750) - Quick-change collet system and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix quick-change tool post, size B - LED work light - Bed stop - Automatic longitudinal and face feeds - Electromechanical spindle brake (switchable) - 2 x emergency stop - Electric chuck key interlock (via sleeve with push-button) - Coolant tank with pump integrated in machine base - Foldable chuck guard - Splash guard wall - Circuit diagram - Adjustable machine feet Required space: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This newer generation of Weiler lathes is extremely user-friendly and robust. The machine can be demonstrated under power at the site. Caedpfevadqzox Afqea All information without guarantee. Subject to prior sale.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 – Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout by K&C Technical Data: >> Year of manufacture: 1987, Machine No. 87 835 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse Taper 3 >> Feeds from 0.015 to 0.46 mm/rev >> Threads: Metric, Imperial, Module, and Diametral-Pitch possible >> Metric thread pitches: 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Features: >> NEW 3-axis digital readout from K&C, 12 months manufacturer warranty with operating manual Features: Switching between mm/inch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter function, quick zeroing, counting direction reversal >> 1 x 160 mm 3-jaw chuck NEW, 2 sets of jaws >> 1 x 160 mm 4-jaw chuck, 1 set of jaws >> Collet chuck and NEW collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Coolant system >> Machine feet Csdpfx Aewrmuxjfqsaa About the machine: Offered here is a used Weiler Condor 81 in very good condition. The machine is, of course, fully operational and has been completely dismantled and newly repainted. A very robust and powerful machine. The new K&C 3-axis digital readout makes operation even easier and more accurate. The machine has been electrically and mechanically tested in our facility. A complete oil change was carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with NEW 3-axis Digital Readout from K&C – FROM TRAINING WORKSHOP! Technical Data: >> Machine No. 91-1814, Year 1991 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, Size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Equipment and Features: >> New 3-axis digital readout by K&C with 12-month manufacturer's warranty and manual Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter conversion, quick zeroing, counting direction switch, >> 1 pc. NEW 3-jaw chuck 160 mm, 2 sets of jaws >> 1 pc. 4-jaw chuck 160 mm, 1 set of jaws >> NEW collet chuck and NEW collets from 2 to 24 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Fixed steady rest >> Machine feet For safety: electronic spindle guard, 2 emergency stop buttons, change gear housing with limit switch, spindle brake Caodpfx Afow Nw Dqsqja About this Machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new 3-axis digital readout by K&C makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our facility.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81, Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout by K&C Technical Data: >> Year of manufacture: 1983, Machine No. 83-067 >> Centre height: 165 mm >> Distance between centres: 750 mm >> Spindle speeds: from 22 to 2,800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, Size 5 with bayonet lock Caedpfxowb Supe Afqea >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake, selectable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Scope of Delivery and Accessories: >> NEW 3-axis digital readout by K&C, 12-month manufacturer’s warranty, complete with manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference marker, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switching >> 1 pcs 3-jaw chuck NEW 160 mm, 2 sets of jaws >> NEW collet chuck and NEW collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 3 holders >> Electronic spindle protection >> Rear guard >> Coolant system >> Machine feet About the Machine: For sale is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital readout from K&C makes work even easier and more precise. The machine has been both electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test the machine under power at our site.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Data: >> Year of manufacture: 1988 Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock taper: MT3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting capability: Metric, Inch, Module and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Accessories: >> 3-axis Heidenhain digital readout >> 1 pc. new 3-jaw chuck with 2 sets of jaws >> Collet chuck system, collets from 3 to 30 mm, 40 pcs. collets, some duplicates >> Multifix size B with 3 tool holders >> Bed stop >> Machine mounts >> Drill chuck >> Live center Cedpsxu Hlaefx Afqsaa For safety: >> Lead and feed screw cover >> 2 emergency stop buttons >> Spindle brake About the machine: For sale is a used Weiler Condor 81 lathe, year 1988, in very good condition. Of course, the machine is fully functional. The lead and feed screws are equipped with protective covers for safety. A very robust and powerful machine. The 3-axis Heidenhain digital readout makes operation even easier and more precise. The machine has been electrically and mechanically tested in our workshop. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine under power at our facility.