Weiler Primus nakup rabljenega (202)

Stanje: zelo dobro (rabljeno), Parallel-Drehmaschine WEILER Typ PRIMUS Spitzenweite: 400 mm Max. Umlaufdurchmesser über Bett: 250 mm Max. Umlaufdurchmesser über Support: 130 mm Spindeldurchlass: 24 mm Kdedpsxnp I Dsfx Ah Dou Multifix-Schnellwechselrevolver Typ A 3-Backenfutter Ø 155 mm Gewindeschneiden: Metrisch + Whitworth Reitstockkegel: MK2 Digitalanzeige: HEIDENHAIN ND522 Automatische Vorschübe: 2 Achsen Neuer Schaltschrank Lieferumfang: 1 4-Backenfutter Ø 155 mm, 4 Werkzeughalter, 1 Bohrfutter Spannung: 380 V Abmessungen (L x B x H): 1300 x 900 x 1900 mm Gewicht: ca. 500 kg Maschine in SEHR GUTEM ZUSTAND

Leto izdelave: 1986, Stanje: rabljeno, Weiler Primus lathe, year of manufacture approx. 1986, three-jaw chuck, Multifix toolpost. The machine is in good condition and can be demonstrated under power by prior arrangement. Kjdpen Ard Dofx Ah Dsdu

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paintwork!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short-taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds: 0.03 - 0.15 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Switchable spindle brake Kodpfxsvivmyo Ah Dsdu >> Weight: approx. 360 kg >> Dimensions (L x H x D): 1.2 m x 1.3 m x 0.65 m Accessories and Equipment: >> 1 piece 125 mm NEW 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck with collets from 3 to 26 mm in 1 mm increments, new About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All carriages run smoothly and evenly. The bed guides are in very good condition. The Primus was installed in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows you to achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see its condition for yourself.

Leto izdelave: 1986, Stanje: rabljeno, Weiler Primus lathe, year of manufacture approx. 1986, three-jaw chuck, Multifix toolpost. The machine is in good condition and can be demonstrated under power by prior arrangement. Kodpfxjrhzcmj Ah Djdu

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Specifications: - Year of manufacture: approx. 1985, Machine no. 1191 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose KK4 DIN 55027 - Tailstock taper: MK 2 - Feeds: 0.03 to 0.15 mm/rev - Thread cutting: Metric, Imperial, Module, and Diametral Pitch - Metric threads from 0.25 to 2.5 mm pitch - Weight approx. 360 kg - Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: - 1 pc. 3-jaw chuck 125 mm with 2 sets of jaws - Collet chuck with 18 collets - Multifix size A quick-change toolpost with 3 holders Kjdpfx Aevtp Edjh Djdu - Stop - Electronic spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-quality surfaces. Take the opportunity to inspect the machine under power on-site and see its condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Specifications: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse Taper 2 >> Feeds: 0.03 to 0.15 mm/rev Kdjdpfxju Aftge Ah Dsu >> Threads possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: length 1.2 m, height 1.3 m, depth 0.65 m Accessories and Equipment: >> 1 pcs. 160 mm 3-jaw chuck with 1 set of jaws >> 1 pcs. new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet system with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the Machine: Offered is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was used in a training workshop. This new generation of Weiler lathes is very operator-friendly and can achieve ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe with 2-Axis Heidenhain Digital Readout from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MK 2 >> Feeds: 0.03 to 0.15 mm/rev >> Possible threads: Metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> 2-axis digital readout from Heidenhain >> 1 new 125 mm 3-jaw chuck with 2 sets of jaws >> New collet chuck system with brand new collets, range from 3 mm up to 25 mm in 1 mm increments Kdodpju Afqlefx Ah Dou >> Multifix size A with 3 tool holders >> Rear splash guard About the machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for ground-like surface finishes. Take the opportunity to view this machine on-site under power and see its condition for yourself.

Stanje: rabljeno, Leto izdelave: 1999, Turning diameter 150 mm Turning length 500 mm Total power requirement 4 kW Machine weight approx. 0.8 t O F F E R We can offer you the following ex-stock, subject to prior sale and errors: W E I L E R LZS - Universal Lathe with Digital Readout Model: PRIMUS VC Year of manufacture: 1999 _____ Centre height 140 mm Max. turning diameter over cross slide 150 mm Max. swing over bed 280 mm Distance between centres 500 mm Spindle bore 40 mm Infinitely variable speed 30 - 4,000 rpm 24 longitudinal feeds 0.02 - 0.63 mm/rev 24 facing feeds (longitudinal feeds x 8) 0.006 - mm/rev Metric threads mm/pitch Inch threads 80 - 2 TPI Module threads module Kdjdpfovm Dv Djx Ah Deu Spindle drive 1.5 kW Total drive 4 kW - 380 V - 50 Hz Weight 800 kg Accessories / Special Equipment • SIEMENS 3-axis digital readout with X-axis, Z-axis, and additional Z-axis (compound slide) • Multifix-A tool quick-change holder • Equipped with a WEILER 3-jaw chuck, 140 mm diameter, mounted • Machine base for tool storage with integrated control cabinet, coolant system • Operating manuals Condition : very good – ready for demonstration Ideal for training workshops Delivery : ex-stock – as inspected Payment : strictly net upon collection – after receipt of invoice We look forward to receiving your order. Further lathes of all sizes in stock – please feel free to enquire.

Stanje: rabljeno, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Kdodpfx Ajrtd Uwsh Dju Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feed: longitudinal and cross Chuck flange: short taper DIN 55022 Size 4 Tailstock taper: MT 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 insert cartridge - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centring tip for collet chuck - Emergency stop - Folding chuck guard - Splash guard - Machine lamp - Electrical diagram - Machine mounted on a steel plate (Steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required floor space (L x W x H): 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, For sale: WEILER lathe, model Primus LZ-GS The machine is in excellent condition. Technical specifications: Year of manufacture: 1989 Machine no.: 4443 Operating voltage: 380 V Centre height: 120 mm Centre distance: 430 mm Spindle speed: 60 - 3,000 rpm with 18 geared steps Spindle bore: 23 mm Short taper spindle nose, DIN 55027 Tailstock: MT 2 Feeds: 0.03 to 0.15 mm/rev Threads possible: metric, imperial, module, and diametral-pitch Metric thread pitches: 0.25 to 2.5 mm Dimensions (LxHxD): 1.2 m x 1.3 m x 0.65 m Prices are subject to VAT. Inspections are possible by appointment. Please contact us—our team will be happy to assist you. Ksdpfoihig Isx Ah Dsdu Trade-in or exchange possible! Machinery purchase / sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or contact options, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Weiler Primus VC Precision Centre Lathe 3-Axis Digital Readout K&C NEW with VC Drive, Infinitely Variable Speed and CE. Very Good Condition Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4000 rpm, infinitely variable >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 Size 5 with bayonet lock >> Tailstock: MT3 >> Feeds from 0.02 to 0.63 mm/rev >> Available threads: metric, imperial, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be engaged >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Equipment and Accessories: >> 3-axis digital readout K&C NEW >> Collet device with collets 3 to 26 mm, new, incremented by 1 mm, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders Kdsdpfew Idllex Ah Deu >> Electronic chip guard >> Machine feet >> Splash guard About the Machine: For sale is a Weiler Primus VC lead and feed screw lathe, year 2003, in very good original condition. An excellent lathe with VC drive and infinitely variable speed control of the main spindle. The digital readout and scales from K&C are new. This newer generation of Weiler lathes is user-friendly and allows for producing surface finishes comparable to grinding. The K&C digital readout further simplifies and improves accuracy of operation. You are welcome to inspect the machine powered up at our premises and convince yourself of its condition.

Stanje: dober (rabljeno), WEILER PRIMUS Type - MD-G - Centre height: 125 mm - Centre distance: 400 mm - Speed range: 40–3000 rpm - Spindle bore: 24 mm - Electrical chuck guard - Multifix quick-change toolpost with inserts - Tailstock with quill - Four-jaw chuck - Work light - Bed stop Dimensions: LxWxH 1.3 x 0.8 x 1.6 metres / Weight 450 kg Kdedpewm Hx Tsfx Ah Dju Subject to errors and omissions.

Stanje: dober (rabljeno), Razdalja med konicama: 450 mm Višina konic: 120 mm Vreteno izvrtina: 23 mm Število vrtljajev: 40 – 3000 min⁻¹ Brezstopenjski pogon s 3 predstopnjami in digitalnim prikazovalnikom števila vrtljajev Ksdpew I A Uxjfx Ah Dsdu Nasadni konjiček: MK 2 Pogon: 1,5 kW Teža: 350 kg Dimenzije: 1200 x 650 x 1330 mm Barva: Resedino zelena RAL 6011. Digitalni prikazovalnik: Po želji ob doplačilu Dodatna oprema: Dodatna oprema na zahtevo

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Universal lead and feed screw lathe Kedpfxov D Ip Nj Ah Djdu Make: WEILER Model: Primus VC Year of manufacture: 2007 - overhauled Newly painted RAL 7035 light grey Machine no.: CK17 Centre height: 140 mm Centre distance: 500 mm Spindle bore: 40 mm with warranty Geometric acceptance test with inspection protocol Accessories: - 3-axis digital readout SIEMENS - Chuck guard with electrical interlock - Braked drive motor - Quick-change tool post, base body size A - Bed stop - Covered lead and feed screw - Chip guard at rear - Removable chip tray - Operating manual - used, as seen -

Stanje: rabljeno, Swing over bed: 250 mm Swing over cross slide: . mm Distance between centers: approx. 400 mm Center height: approx. 125 mm Speed range: 80 - 3000 rpm Number of speed steps: 18 Spindle bore: 24 mm Tailstock quill taper: MT 3 Weight: approx. 400 kg Dimensions: approx. 1200 x 650 x 1300 mm Four-jaw chuck diameter: 125 mm Including Röhm four-jaw chuck, Ø 125 mm, with drilling and turning jaws; Collet chuck with collets 1-20 mm in 1 mm increments; Multifix size A with 3 tool holders; Ksdpfswa Dz Eox Ah Dodu Chuck guard with safety interlock

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 40 mm, višina središča: 140 mm, stružna dolžina: 500 mm, največja hitrost vretena: 4.000 obr/min, hitrost vretena (min.): 30 obr/min, največja hitrost vrtenja: 4.000 obr/min, vrtljajska hitrost (min.): 30 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Distance between centres: 500 mm Centre height: 140 mm Spindle bore: 40 mm Spindle speed: 30 - 4000 rpm Kedsvnr E Nspfx Ah Dodu Weight: approx. 800 kg Dimensions: approx. 1430 x 935 x 1550 mm Accessories: operation manual, lamp, Multifix tool holder, collet chuck device (at extra charge) Further accessories available on request

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus GS Lead and Feed Screw Lathe in Very Good Original Condition!!! Technical Specifications: >> Year of manufacture: approx. 1992, Machine No. 4549 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose DIN 4 >> Tailstock taper: MT2 Kjdewkh Abopfx Ah Dodu >> Feeds from 0.03 to 0.15 mm/rev >> Capable of cutting metric, inch, module, and diametral pitch threads >> Metric thread pitch from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Features: >> New collet chuck system, new collets from 3 to 25 mm >> 1 three-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders About the Machine: For sale is a Weiler Primus GS lead and feed screw lathe in very good original condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The bed ways are in excellent condition. Even at high speeds, the Weiler runs very quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and enables ground-finish surfaces to be produced. Take the opportunity to inspect the machine under power on site and see its condition for yourself.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 864, višina središča: 140 mm, širina na sredini: 500 mm, Machine from the insolvency of an automotive supplier – machines are currently still in operation! TECHNICAL DETAILS Digital Display: available Control System: Siemens Sicomp IMC 05 Centre Height: 140 mm Centre Distance: 500 mm Clamping System 3-jaw Chuck: available Quick-change Tool Post: available Tailstock Type: available Further information as per manufacturer – without guarantee Centre Distance: 500 mm Centre Height: 140 mm Swing Diameter over Bed: 280 mm Swing Diameter over Cross Slide: 150 mm Main Spindle Spindle Nose to DIN ISO 702-3: Size 5 Spindle Front Bearing Diameter: 70 mm Spindle Bore: 43 mm Main Spindle Taper Depth: 50 mm Main Drive Drive Power (100% duty cycle): 4 kW Speed Range: 30 – 4,000 rpm Number of Speed Gears: 1 Number of Speed Stages: stepless Feed Drive Number of Feeds: 24 Longitudinal/Cross Feed Range: 0.02 – 0.63 mm/rev / 0.006 – 0.2 mm/rev Thread Cutting Range Metric Threads: 0.25 – 8 mm Inch Threads: 80 – 2 TPI Tailstock Quill Diameter: 40 mm Quill Stroke: 85 mm Kdjdpfx Ahsv N Inio Deu Quill Taper: MT 3 Machine Dimensions Length x Width x Height: 1,570 x 890 x 1,700 mm Weight: 1,050 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Centre distance: 450 mm Kdodpfjwcxf Dox Ah Dju Centre height: 120 mm Spindle bore: 23 mm Speed range: 30 – 3000 rpm Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint finish: Reseda green RAL 6011. Digital readout: Available on request at extra cost Accessories: Further accessories available on request! We are also pleased to offer this machine fully reconditioned!

Stanje: dober (rabljeno), Leto izdelave: 2000, Weiler Primus VC, Year of manufacture: 2000, Digital readout, Centre distance: 500 mm, Max. swing over cross slide: 150 mm, Spindle speed up to 4,000 rpm, Spindle bore: 40 mm, Spindle drive: 1.5 kW, Multifix toolholder, 24 longitudinal feeds, Kdodov Ifxiepfx Ah Dsu Metric threads, Inch threads,

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus GS Lead and Feed Screw Lathe with 3-Axis Digital Readout Easson ES8 From training workshop – In excellent condition! Kjdpfxsvkfhpo Ah Dedu Technical Data: • Year of manufacture: approx. 1990, machine no. 3768 • Centre height: 120 mm • Centre distance: 430 mm • Spindle speed: 60 – 3000 rpm in 18 gear steps • Spindle bore: 23 mm • Camlock spindle nose, DIN 4 • Tailstock: Morse taper 2 • Feeds: 0.03 to 0.15 mm/rev • Thread cutting: Metric, Inch, Module, and Diametral Pitch • Metric thread pitches: 0.25 to 2.5 mm • Weight: approx. 360 kg • Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: • 3-axis digital readout by Easson ES8 • Collet chuck system from 1 to 20 mm, collets in 1 mm increments with chuck and draw tube • 1 three-jaw chuck with 2 sets of jaws • 1 four-jaw chuck with 2 sets of jaws • Multifix size A with 3 tool holders • Bed stop • Facing attachment About the machine: Offered is a Weiler Primus lead and feed screw lathe, year approx. 1990, in outstanding condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The bed ways are in excellent condition. Even at high spindle speeds, the Weiler runs quietly. The machine comes from a large company’s training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surface finishes comparable to grinding. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Bench Lathe – Excellent Condition !!! Technical Data: >> Machine No. 2801 >> Center Height: 120 mm >> Distance Between Centers: 430 mm Kdsdpfxsv Tyzcj Ah Dju >> Spindle Speed: 60 - 3000 rpm in 18 gear steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 55027 >> Tailstock Morse Taper: MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 2.5 mm >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 pc Röhm 125 mm three-jaw chuck with 4 sets of jaws >> Collet system with collets from 2 mm to 12 mm in 1 mm increments, including drawbar >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle guard >> Clamping tools About the Machine: Offered is a Weiler Primus lead and feed screw bench lathe in very good condition. The machine is, of course, fully functional. All carriages move very smoothly and evenly. The Weiler runs quietly, even at high spindle speeds. This Primus comes from a government facility where it saw little use. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. Take the opportunity to inspect the machine under power on site and convince yourself of its condition. (The base cabinet is included; the machine is not bolted to it.) Digital readout available at additional cost.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Weiler Primus VC precizni stružnica Leto izdelave: 2011 Tehnične podrobnosti Premer struženja: 250 mm Dolžina struženja: 500 mm Višina konic: 140 mm Premer nad sanmi postelje: 280 mm Maks. premer nad prečnim suportom: 150 mm Glavno vreteno: Območje vrtljajev glavnega vretena: 30 – 4.000 min⁻¹ Moč: 4,0 kW Število prestav: 1 Vpenjalna glava: velikost 5 / DIN 55027 Premer vretena v prednjem ležaju: 70 mm Premer odprtine vretena: 40 mm Uporabni premer prehoda palic: 40 mm Nosilec orodja: Sistem: MultiFix B Presek držala rezila: 20 x 20 mm Kodpfx Ahow Ebdbo Dodu Konjiček: Hod pinole: 85 mm Premer pinole: 40 mm Stožec konjička: MK 3 Pomiki: Število pomikov: 24 Vzdolžni pomik: 0,02 – 0,63 mm/obrat Prečni pomik: 0,006 – 0,2 mm/obrat Narezovanje navojev: Metrski navoj: 0,25 – 8 mm Colni navoj: 80–2 1/” Pomiki osi: X-pomik – prečni suport: 150 mm Z-pomik prečnega suporta: 500 mm Z-pomik zgornjega suporta: 110 mm Skupna priključna moč: 15 kVA Teža stroja: pribl. 800 kg Dimenzije (DxŠxV): 1400 x 935 x 1550 mm Oprema/možnosti: - Dokumentacija - Tridelna vpenjalna glava, premer 160 mm, z čeljustmi - Štiridelna vpenjalna glava, premer 160 mm, z čeljustmi - Vpenjalna glava za vpenjalne puše z vpenjalnimi pušami - Konjiček - MultiFix nosilec orodja z držali - Podporni prislon (luneta) - Menjalna kolesa - Razno orodje - Lista omara - Rezervni deli - ipd. Stroj je pod napetostjo v našem skladišču.

Stanje: rabljeno, Leto izdelave: 2002, Weiler E90 / 4.5M – CNC Lathe with Cycle Automation - Weiler D2 cycle control - Chip conveyor - Approx. 15 Multifix toolholders - 1 live center - Regular service performed by Weiler - Supplied without chuck, without steadies - Year of manufacture: 2002 Technical Data Working Area: - Distance between centers: 4500 mm - Center height: 450 mm - Swing over bed: 900 mm - Swing over cross slide: 530 mm - Bed width: 600 mm Kdodpfxsxn Rr Rs Ah Deu - Cross slide travel: 590 mm - Top slide travel: 250 mm - Cross slide length: 1230 mm - Cross slide width: 345 mm - Bed guideway length: 860 mm - Tool shank section (height/width): 40 x 40 mm Spindle: - Spindle nose to DIN 55027 / 55026 size: 11 - Spindle diameter in front bearing: 178 mm - Spindle bore: 128 mm - Main spindle Morse taper (metric): 140 mm Main Drive: - Spindle nose to DIN 55027 size: 11 - Total speed range: 1 – 1120 rpm - Speed range gear stage I: 1 – 350 rpm - Speed range gear stage II: 4 – 1120 rpm - Drive power at 60% / 100% duty cycle: 45 / 37 kW - Max. torque at spindle: 6000 Nm Feed Drive: - Feed range Z/X: 0 – 20 mm/rev - Feed force Z/X: 20 kN - Rapid traverse speed Z/X: 7 / 3.5 m/min Tailstock: - Quill diameter: 140 mm - Quill stroke: 300 mm - Quill taper: MK 6 Thread Cutting Range: - Metric threads: 0.1 – 400 mm - Inch threads: 1/4 – 56 TPI - Module threads: 0.125 – 28 mm - DP threads: 1 – 224 DP Connection Data: - Operating voltage: 400 V - Control voltage: 24 / 230 V - Connected load: 55 kW - Rated current: 85 A Machine Dimensions: - Overall length: 6900 mm - Overall width: 2600 mm - Overall height: 2120 mm - Machine weight: 10,500 kg

Leto izdelave: 1973, Stanje: zelo dobro (rabljeno), Turning length 125 mm Machine weight approx. 0.4 t O F F E R We can offer you, subject to prior sale and errors, from stock: W E I L E R Precision Machinist Lathe Model MDU Year of manufacture 1973 #13010 _____ Centre height 125 mm Max. turning Ø over cross slide 140 mm Max. swing Ø over bed 260 mm Between centres 500 mm Spindle bore 28 mm Range 1 – Speed range: 220–1,800 rpm Range 2 – Speed range: 110–3,600 rpm Spindle drive kW Total power kW - V - Hz Weight 500 kg Accessories / Special features • Equipped with a 3-jaw chuck from RÖHM, 110 mm Ø, mounted • Machine base with integrated tool storage and comprehensive accessory package, including collet sets Condition : Very good – ready for demonstration. Ideal for training workshops, maintenance, etc. Please click here for a video of the machine : Kjdpfx Asxpxqwoh Dsdu MDU260/4 Delivery : ex-stock – as inspected Payment : strictly net on collection – after receipt of invoice