Center stružnica

WEILER Commodor B - Teilüberholt

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3595, Dear Sir or Madam, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone a comprehensive partial overhaul in our workshop. Among other things, both the main spindle bearings and the leadscrew/feedshaft bearings have been completely renewed! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to inspect on-site. Availability: on request Machine No.: 3595 Year of manufacture: 2001 Center height: 180 mm Center distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 - 0.888 mm/rev Dedpfx Asthd Shepleut Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions (LxHxW): approx. 2.2 x 1.5 x 1 m Weight: approx. 1.8 t Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, pull-out chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various chuck jaws... Our service promise to you: - We are a certified master workshop specializing in mechanical engineering. - All machines are thoroughly inspected. - All lubricants and, if necessary, worn parts are replaced in advance. - Upon request, we can carry out a complete or partial overhaul of the machine of your choice. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools directly. - Upon request, we can also install further accessories such as safety equipment, etc. - We are happy to arrange shipping and/or installation for you.

Stanje: rabljeno, Leto izdelave: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Dsdpfoynmpgjx Aplsut Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: ±180° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (between centres including clamping): 130 kg Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Required floor space approx.: 4.2 x 2.0 m Initially delivered new to a university. Taken over in 2018. Then fully serviced at BEMA and delivered to a one-man operation. The machine is currently being serviced again and the table geometry restored. 2-axis Fagor digital readout retrofitted. - Tailstock with fine adjustment - Internal grinding attachment - Coolant system Accessories available on request.

Stanje: novo, Leto izdelave: 2026, Swing diameter over bed: 350 mm Swing diameter over support: 196 mm Turning length: 650 mm Dedpfjxxb Azox Aplout Centre height: 170 mm Spindle bore: 42 mm Drive power: 7.5 kW - New machine - with 3-axis digital readout ACU-RITE including constant cutting speed, traversable over the entire bed length, MULTIFIX quick-change tool post size MB * For more information on the exact standard equipment and available options, please visit our website or contact us directly *

Stanje: rabljeno, Leto izdelave: 1989, Used, well-maintained GEIBEL+HOTZ surface grinding machine, model FS 50 SA Grinding area: 500 x 250 x 375 mm Vertical automatic feed Equipped with fine-pole electro-magnetic chuck Grinding wheel diameter: 300 x 50 x 76.2 mm Includes paper band filtration unit and manual dresser on top Various wheels and flanges included Weight: approx. 2,400 kg Required floor space: approx. 2,500 x 1,800 x height 2,500 mm Duedowq Nc Nopfx Aplot The machine is located at our facility in 71334 Waiblingen-Beinstein and can, of course, be inspected. Please feel free to contact us.

Stanje: dober (rabljeno), NHH Lathe Swing over bed: 260 mm Swing over cross slide: 160 mm Spindle bore: 26 mm Turning length: 600 mm Heidenhain digital readout Chuck diameter: 155 mm Dujdpfx Apsmw Ukcjlot Spindle speed: 2,000 rpm Dimensions (LxWxH): 150 x 85 x 155 cm

Stanje: rabljeno, Swing diameter over bed: 480 mm Swing diameter over cross-slide: 300 mm Turning length: 1500 mm Center height: 240 mm Center distance: 1500 mm Spindle bore: 42 mm Spindle speeds: 14 – 1400 rpm Total power requirement: kW Djdpfx Astqqx Aopleut Machine weight approx. 2.4 t Machine dimensions (L x W x H): 3.00 x 1.05 x 1.40 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX toolpost, live center

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout (NEW) Geometrically overhauled with an acceptance report certifying tolerances compliant with new machine standards. Technical Data: >> Machine No.: 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock Morse Taper: MK 3 >> Feeds: 0.015 to 0.46 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.18 to 28 mm Dujdpfx Apswrm Dtjlot >> Weight: approx. 1100 kg >> Spindle Brake (switchable) >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Accessories: >> 3-axis digital readout from K&C (new), 12 months manufacturer's warranty, operating manual included Functions: mm/inch selection, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, selectable counting direction >> NEW collet chuck, NEW collet set 3–26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws (NEW) >> Multifix (Quick-Change Toolpost) Size B (NEW) with 3 tool holders >> Bed stop >> Electrical chuck guard (NEW) >> Rear splash guard >> Operating manual >> Coolant system >> Machine levelling feet About the Machine: A Weiler Condor 81 lead and feed screw lathe is being offered in excellent, geometrically overhauled condition. The slides have been newly ground or hand-scraped. Delivered with an inspection protocol. The accessories, collets, and chuck are all new. For safety: The machine is equipped with a braking motor, electronic spindle guard, and two emergency-stop buttons—a lathe in as-new condition. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and capable of producing surfaces comparable to grinding. Take the opportunity to view and test the machine under power on site to convince yourself of its condition.

Stanje: zelo dobro (rabljeno), Lead and feed screw lathe Spindle bore: 76 mm Centre height: 220 mm Turning length: 3.00 m Duedpfx Apova Ef Tsljt Multifix toolpost with 5 cassettes Coolant system Operating manual

Stanje: zelo dobro (rabljeno), Here we offer a used Datona Mobile Sandblasting Unit. Datona Mobile Sandblasting Unit DUO - 74 Liter SKU DT-55212 Pros and Cons: - 2.5 m long hose for extended range Dusdoqcuvwopfx Aplst - Easy switching between blasting media thanks to the mixing valve - When using soda, the surface of the workpiece is not damaged Description: This mobile sandblasting unit is used for removing paint and rust. Thanks to the two tanks, you can choose between two different blasting media. The mobile sandblaster operates with a pressure of 4 to 8 bar and requires a compressor with a minimum intake capacity of 350 l/min. Dual Tank: If blasting with soda or calcium carbonate does not achieve the desired result, simply switch to a different blasting medium. For a more effective operation, it is also possible to use both media at the same time. With this sandblasting unit, you get a practical machine for your workshop. With the special mixing valve you can gently and easily remove paint from steel, stainless steel, chrome, aluminium, or polyester using soda. A major advantage of blasting with fine soda is that the surface of the object being blasted is not damaged. You do not even need to remove rubber seals, chrome parts or glass. This saves a lot of time! The mobile sandblasting unit can be used both in the workshop and on-site. Please note: One of the tanks is exclusively suitable for soda and calcium carbonate! ✓ Duo sandblasting unit ✓ 74 litre tank capacity ✓ Air consumption approx. 350 l/min Technical data: SKU: DT-55212 Weight: 33 kg Suitable blasting media: - Aluminium silicate - Dato-Blast calcium carbonate - Soda Blasting cabinet connection: 1/4" Max. pressure: 2 – 6 bar Minimum air consumption: 350 l/min Minimum compressor tank capacity: 100 litres Type: DT-55212 Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications reserved!) For further questions, please do not hesitate to contact us by phone.

Stanje: rabljeno, Precision lathe BOLEY Type 4 LE Conventional high-precision universal multifunction machine tool Serial No. 42562 Centre distance: 500 mm Swing over bed: 240 mm Centre height over bed: 120 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 23 mm Chuck mounting: M40 x 3.5 mm external thread Tailstock taper: MK 2 Quill adjustment / travel: 80 mm Spindle speed: 30 – 1,300 rpm Drive power: 1.1 kW Power supply: 400 Volt, 50 Hz - 3-axis digital readout RSF ELEKTRONIC, Type Z503ST-220 - Position display HEIDENHAIN, Type VRZ 136B for rotary encoder - LCD display unit for measuring systems included in accessories - Spindle speed adjustable via 2 V-belt stages, 2 gear stages, and steplessly via variator belt drive - Longitudinal feed via change gears + change gear set - Several 3-jaw and 4-jaw chucks, Ø 100, 125 and 140 mm, with chuck jaws - QUICK-CHANGE TOOLPOST MULTIFIX size A with 8 tool holders - Vertical slide with clamping device - Several clamping devices and machine vices - Clamping plates + clamping tables - Indexing table for use like dividing head - Dividing head with collets and tailstock - Heavy-duty dividing head with clamping plate and handwheel drive - WOHLHAUPTER spindle tools and milling tools + collets - High-speed spindle with pneumatic drive - Milling slide with collet chuck - Internal cylindrical grinding device - Live center - Fixed steady rest - Central oil lubrication VOGEL - Built-in mini compressor (3.5 bar) in the machine base - Compressed air maintenance unit for tool operation - Operating manual - Machine mounted on a steel plate (steel plate 1200 x 540 x 20 mm) Required space L x W x H: 1650 x 950 x 1750 mm Dedjw Dvv Aopfx Aplsut Machine weight: 660 kg (with steel plate) Weight of accessories: 325 kg Very good condition