Weiler Matador Vs1 nakup rabljenega (179)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Universal lead and feed screw lathe Make: WEILER Model: Primus VC Kedpfjv D Ip Nox Adksww Year of manufacture: 2007 - overhauled Newly painted RAL 7035 light grey Machine no.: CK17 Centre height: 140 mm Centre distance: 500 mm Spindle bore: 40 mm with warranty Geometric acceptance test with inspection protocol Accessories: - 3-axis digital readout SIEMENS - Chuck guard with electrical interlock - Braked drive motor - Quick-change tool post, base body size A - Bed stop - Covered lead and feed screw - Chip guard at rear - Removable chip tray - Operating manual - used, as seen -

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1974, Universal lead and feed screw lathe Make: WEILER Model: Commodor Year of manufacture: 1974 – overhauled Newly painted RAL 7035 light grey Machine No.: 0068 Centre height: 180 mm Distance between centres: 1000 mm Kedpsmgaddjfx Adksww Spindle bore: 56 mm With warranty Geometric acceptance with test protocol Accessories: - New FAGOR Innova 30i-T 3-axis digital readout - Chuck guard with electrical interlock - Quick-change tool post, size B - Simple bed stop - Coolant system - Operating manual - Used, as seen -

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1990, Universal lead and feed screw lathe Manufacturer: WEILER Model: Praktikant 160 B Year of manufacture: 1990 - overhauled newly painted RAL 7035 light grey Machine no.: 90-160-2054 Centre height: 160 mm Centre distance: 650 mm Geometric inspection with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i T - Covered lead and feed screw - Braked drive motor - Coolant device - Electrically interlocked chuck guard Kedpfohy Tdyjx Adkoww - Quick-change tool post, size A - Simple bed stop - Chip guard rear panel - Operating manual With warranty Used, as seen The machine is technically compliant with the state of the art at the time of manufacture.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Universal lead and feed screw lathe Manufacturer: WEILER Model: Condor B Year of manufacture: 1989 - overhauled newly painted, RAL 7035 light grey Machine no.: 1401 with warranty Includes: - 3-axis digital readout FAGOR Innova 30i T, new - Chuck guard with electrical interlock, new - Quick-change tool post base unit, size B - Bed stop - Coolant system - Chip backsplash - Operating manual Ksdpfxjg R S Rcs Adkoww -Used, as seen-

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C from Vocational School Inventory Kjdpfx Aex Eb A Usdksww Technical Specifications: >> Year of manufacture: 1992 >> Machine No.: 92 160 3260 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds: 24 to 2,500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose to DIN 55027, size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake can be activated >> Dimensions: Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: >> 3-axis digital readout from K&C with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck system with new collets from 3 to 26 mm in 1 mm increments >> 160 mm three-jaw chuck (steel jaws) with one set of jaws >> Quick-change toolpost with 4 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Coolant system >> Operating manual, spare parts list About the machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe, built in 1992, with toolroom accuracy, in excellent condition. The machine is fully functional. All carriages move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is highly user-friendly, and surfaces of ground finish quality can be produced. Take the opportunity to view the machine under power on site and convince yourself of its condition.

Stanje: rabljeno, Premer struženja nad posteljo: 370 mm Premer struženja nad suportom: 200 mm Dolžina struženja: 1000 mm Višina konic: 185 mm Kedpfjxfwcksx Adkoww Vpenjalna odprtina vretena: 56 mm Vpenjalo konjička: MK 4 Hitrost vrtenja: 50 - 2000 vrt/min Pogonska moč: 4,0 kW Teža stroja: pribl. 1,4 t Dimenzije: pribl. 2,3 x 1,1 x 1,3 m Stružnica z vodilnim in vlekalnim vretenom Tričeljustna vpenjalna glava 200 mm Nosilec orodja Multifix, velikost B 3 kom. Multifix kasete Naprava za izklop v sili

Stanje: rabljeno, Turning length 800 mm Turning diameter 280 mm Turning diameter over cross slide 150 mm Spindle bore 42.0 mm Tailstock quill taper MK 3 Bed width 208 mm Spindle speed 42 - 2022 rpm Spindle mount DIN 55027/5 Quill stroke 90.0 mm Voltage 380 V Total power requirement 3.0 kW Machine weight approx. 750 kg Kwedpfjxacg Rox Adkew Dimensions (LxWxH) 1800 x 800 x 1250 mm Due to its design (construction type, power, feeds, etc.), it is ideally suited for use both in training workshops as well as for toolmaking and repair shops. Equipment: - Robust conventional lead and feed screw lathe - WMW 3-jaw chuck Ø 150 mm - Faceplate 280 mm - MULTIFIX quick-change toolpost with insert - Sliding tailstock - Chuck key - Machine base with storage compartment - Pole-changing drive motor - Operating manual

Stanje: potreben popravila (rabljeno), Turning length 1000 mm Swing diameter over bed 380 mm Swing diameter over cross slide 190 mm Spindle speed range 25 - 2000 rpm Number of spindle speeds 18 Spindle bore Ø 56.0 mm Tailstock quill taper MK DIN 228 / MK 4 Quill stroke 150 mm Bed width 310 mm Spindle mount DIN 55027 / 6 Longitudinal feeds 0.022 - 0.8 mm/rev Cross feeds 0.011 - 0.4 mm/rev Thread cutting metric 0.3 - 10.0 mm Operating voltage 380 V Total power requirement 7.5 kW Kwedpfx Adew U U Uqekew Machine weight approx. 1600 kg Basic functions available Machine has various leaks Sold as is at a special price! Lathe with precision-ground and induction-hardened bed. Very well suited, e.g., for use in workshops and training centers. - Machine video - ?v=zCGu4i6V5dM Equipment: - robust lead-screw and feed-screw lathe - FORKARDT 3-jaw chuck Ø 200 mm, with chuck key - MULTIFIX tool post - size B - with 3 inserts - movable tailstock, including quick-action drill chuck - swarf guard rear panel - front emergency stop button - adjustable bed stop - coolant device including coolant tray - operating manual (PDF)

Stanje: dober (rabljeno), Leto izdelave: 2008, Weiler DZ 40, leto izdelave 2008, krmiljenje Siemens 840 D, pomik X/Z 200/350 mm, premer struženja 180 mm, maksimalni obhodni premer 560 mm, os Y +/- 25 mm, os Q / programabilna konjička, pomik osi Q 360 mm, merilni sistem osi Q rotacijski, konjiček MK 4, glavno vreteno maksimalen prehod droga 42 mm, premer vretena 52 mm, hitri pomik X/Z/Q 30/30/20 m/min, revolver 16 položajev – vse postaje gnane, VDI 25, premer držala 25 mm, gnana orodja do 4.500 vrt/min, pladenj za dele, dodatna oprema, nosilci za gnana orodja, fiksni nosilci. Kjdpfx Asx U S D Dedkjww

Stanje: rabljeno, Leto izdelave: 2008, Swing diameter: 720 mm Turning length: 3000 mm Centre height: 360 mm Spindle bore: 106 mm Kwsdpfx Asw A Sqmedkew Speed range: 1 - 1800 rpm Tailstock quill taper: MT 6 Max. workpiece weight: 3,800 kg Total power requirement: 36 kW Machine weight approx.: 6,100 kg Space requirement approx.: 4,800 x 2,450 x 2,000 mm CNC lathe – cycle-controlled Equipment: - Chip conveyor - Coolant system - 3-jaw chuck Ø630 mm - MULTI-FIX quick change tool post - Live centre - Machine lamp

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1977, Strojniška stružnica Znamka: WEILER Model: MDU 260 Leto izdelave: 1977 – delavniško testirana Št. stroja: 14942 Višina konic: 125 mm Premer vretena: 28 mm Oprema: - Električni pokrov vpenjala - 3-čeljustno vpenjalo Ø 140 mm vključno s kompletom stružnih čeljusti vključno s kompletom svedrskih čeljusti - 4-čeljustno vpenjalo Ø 140 mm vključno s kompletom stružnih čeljusti vključno s kompletom svedrskih čeljusti - Varnostni ključ za vpenjalo - Ročni vpenjalni sistem - Set vpenjalnih tulec W28 (366E) - Set (=25 kosov) napenjalnih tulec W28 (366E), od 1,0 do 25,0 mm v korakih po 1,0 mm - Trdna konica za glavni vretenik W28 (366E) - Hitromenjalni nosilec orodja osnovno telo velika A Kwsdoxv A I Tepfx Adkjw - Navodila za uporabo Rabljeno kot je vidno, prodano brez garancije Stroj tehnično ustreza standardu iz leta izdelave.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 340 mm, stružna dolžina: 1.100 mm, izvrtina vretena: 63 mm, Premer v ukrivljenju 600 mm, največja teža obdelovanca 1000 kg, 1200 Nm, vrtljaji 625–2500, 20 kW. Kwsdpfxex Sxb Dj Adkjw

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 41.000 h, izvrtina vretena: 165 mm, stružna dolžina: 3.000 mm, premer struženja: 830 mm, premer struženja nad ležiščem sani: 1.200 mm, poteza s peresom: 400 mm, premer tulec: 140 mm, vrtilni moment: 8.000 Nm, Technical Data ----- Max. turning length: 3,000 mm Turning diameter: 830 mm Max. swing over bed: 1,200 mm Bed width: 600 mm Spindle bore: 165 mm Spindle nose: DIN 55027 size 15 Chuck: Forkardt 3KS 800 mm Ksdpfx Asv Nhxzedkeww Speed range: 1 - 280 / 4 - 900 rpm Number of gearbox speeds: 2 Torque: 8,000 Nm Number of turrets: 1 Sauter 4-position head turret for 140 mm toolholders Tailstock Quill diameter: 140 mm Quill stroke: 400 mm Features ----- Electronic handwheel Hydraulic power chuck Forkardt 3KS 800 mm Chip conveyor

Stanje: zelo dobro (rabljeno), Odlično stanje, redno vzdrževano (računi na voljo), veliko dodatne opreme! Kwodpfoxw D S Aox Adkew

Leto izdelave: 1973, stanje: zelo dobro (rabljeno), Turning length 125 mm Machine weight approx. 0.4 t O F F E R We can offer you, subject to prior sale and errors, from stock: W E I L E R Precision Machinist Lathe Model MDU Year of manufacture 1973 #13010 _____ Centre height 125 mm Max. turning Ø over cross slide 140 mm Kwjdpfx Adjxpxqwekew Max. swing Ø over bed 260 mm Between centres 500 mm Spindle bore 28 mm Range 1 – Speed range: 220–1,800 rpm Range 2 – Speed range: 110–3,600 rpm Spindle drive kW Total power kW - V - Hz Weight 500 kg Accessories / Special features • Equipped with a 3-jaw chuck from RÖHM, 110 mm Ø, mounted • Machine base with integrated tool storage and comprehensive accessory package, including collet sets Condition : Very good – ready for demonstration. Ideal for training workshops, maintenance, etc. Please click here for a video of the machine : MDU260/4 Delivery : ex-stock – as inspected Payment : strictly net on collection – after receipt of invoice

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Specifications: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse Taper 2 >> Feeds: 0.03 to 0.15 mm/rev >> Threads possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: length 1.2 m, height 1.3 m, depth 0.65 m Accessories and Equipment: >> 1 pcs. 160 mm 3-jaw chuck with 1 set of jaws >> 1 pcs. new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet system with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop Kwodeu Aftgopfx Adksw >> Change gears About the Machine: Offered is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was used in a training workshop. This new generation of Weiler lathes is very operator-friendly and can achieve ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Kwodpfx Adevtp Edeksw Technical Specifications: - Year of manufacture: approx. 1985, Machine no. 1191 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose KK4 DIN 55027 - Tailstock taper: MK 2 - Feeds: 0.03 to 0.15 mm/rev - Thread cutting: Metric, Imperial, Module, and Diametral Pitch - Metric threads from 0.25 to 2.5 mm pitch - Weight approx. 360 kg - Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: - 1 pc. 3-jaw chuck 125 mm with 2 sets of jaws - Collet chuck with 18 collets - Multifix size A quick-change toolpost with 3 holders - Stop - Electronic spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-quality surfaces. Take the opportunity to inspect the machine under power on-site and see its condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paintwork!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short-taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds: 0.03 - 0.15 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions (L x H x D): 1.2 m x 1.3 m x 0.65 m Accessories and Equipment: >> 1 piece 125 mm NEW 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck with collets from 3 to 26 mm in 1 mm increments, new Kjdovivmyspfx Adkeww About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All carriages run smoothly and evenly. The bed guides are in very good condition. The Primus was installed in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows you to achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see its condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor B with Lead and Feed Screw, 3-Axis Digital Readout by K&C, NEW, CE Compliant! Technical Specifications: >> Machine No.: 2442, Year of manufacture: 1997 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm Ksdpoxcuazofx Adkoww >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 (MT 3) >> Feeds from 0.015 to 0.46 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and Features: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty with operating manual Functions: mm/inch conversion, coordinate choice ABS/INC, value halving, reference mark, tool programming (200 tools), taper calculation, radius/diameter, one-touch zeroing, count direction switching >> 1 piece new 3-jaw chuck 160 mm, 2 sets of jaws >> 1 piece 4-jaw chuck 200 mm, 1 set of jaws >> New collet chuck and new collets from 3 to 25 mm in 1 mm increments >> Multifix size B quick-change tool post with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear cover >> Machine feet Safety features: electronic spindle guard, 2 emergency stop buttons, change gear box with limit switch, spindle brake About the machine: Offered is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our premises.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 – Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout by K&C Technical Data: >> Year of manufacture: 1987, Machine No. 87 835 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse Taper 3 >> Feeds from 0.015 to 0.46 mm/rev >> Threads: Metric, Imperial, Module, and Diametral-Pitch possible >> Metric thread pitches: 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Features: >> NEW 3-axis digital readout from K&C, 12 months manufacturer warranty with operating manual Features: Switching between mm/inch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter function, quick zeroing, counting direction reversal >> 1 x 160 mm 3-jaw chuck NEW, 2 sets of jaws >> 1 x 160 mm 4-jaw chuck, 1 set of jaws >> Collet chuck and NEW collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Coolant system >> Machine feet About the machine: Kjdpswrmuxofx Adkoww Offered here is a used Weiler Condor 81 in very good condition. The machine is, of course, fully operational and has been completely dismantled and newly repainted. A very robust and powerful machine. The new K&C 3-axis digital readout makes operation even easier and more accurate. The machine has been electrically and mechanically tested in our facility. A complete oil change was carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with NEW 3-axis Digital Readout from K&C – FROM TRAINING WORKSHOP! Technical Data: >> Machine No. 91-1814, Year 1991 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, Size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Equipment and Features: >> New 3-axis digital readout by K&C with 12-month manufacturer's warranty and manual Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter conversion, quick zeroing, counting direction switch, >> 1 pc. NEW 3-jaw chuck 160 mm, 2 sets of jaws Kwodpfxjw Nw Dqs Adksw >> 1 pc. 4-jaw chuck 160 mm, 1 set of jaws >> NEW collet chuck and NEW collets from 2 to 24 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Fixed steady rest >> Machine feet For safety: electronic spindle guard, 2 emergency stop buttons, change gear housing with limit switch, spindle brake About this Machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new 3-axis digital readout by K&C makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our facility.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Data: >> Year of manufacture: 1988 Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock taper: MT3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting capability: Metric, Inch, Module and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Accessories: >> 3-axis Heidenhain digital readout >> 1 pc. new 3-jaw chuck with 2 sets of jaws >> Collet chuck system, collets from 3 to 30 mm, 40 pcs. collets, some duplicates >> Multifix size B with 3 tool holders >> Bed stop >> Machine mounts >> Drill chuck >> Live center For safety: Kwjdpfx Adexu Hlaekow >> Lead and feed screw cover >> 2 emergency stop buttons >> Spindle brake About the machine: For sale is a used Weiler Condor 81 lathe, year 1988, in very good condition. Of course, the machine is fully functional. The lead and feed screws are equipped with protective covers for safety. A very robust and powerful machine. The 3-axis Heidenhain digital readout makes operation even easier and more precise. The machine has been electrically and mechanically tested in our workshop. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine under power at our facility.

Stanje: rabljeno, Leto izdelave: 1999, Turning diameter 150 mm Turning length 500 mm Total power requirement 4 kW Machine weight approx. 0.8 t O F F E R We can offer you the following ex-stock, subject to prior sale and errors: W E I L E R LZS - Universal Lathe with Digital Readout Model: PRIMUS VC Year of manufacture: 1999 _____ Centre height 140 mm Max. turning diameter over cross slide 150 mm Max. swing over bed 280 mm Distance between centres 500 mm Ksdpfjvm Dv Dsx Adksww Spindle bore 40 mm Infinitely variable speed 30 - 4,000 rpm 24 longitudinal feeds 0.02 - 0.63 mm/rev 24 facing feeds (longitudinal feeds x 8) 0.006 - mm/rev Metric threads mm/pitch Inch threads 80 - 2 TPI Module threads module Spindle drive 1.5 kW Total drive 4 kW - 380 V - 50 Hz Weight 800 kg Accessories / Special Equipment • SIEMENS 3-axis digital readout with X-axis, Z-axis, and additional Z-axis (compound slide) • Multifix-A tool quick-change holder • Equipped with a WEILER 3-jaw chuck, 140 mm diameter, mounted • Machine base for tool storage with integrated control cabinet, coolant system • Operating manuals Condition : very good – ready for demonstration Ideal for training workshops Delivery : ex-stock – as inspected Payment : strictly net upon collection – after receipt of invoice We look forward to receiving your order. Further lathes of all sizes in stock – please feel free to enquire.

Leto izdelave: 1986, stanje: rabljeno, Weiler Primus lathe, year of manufacture approx. 1986, three-jaw chuck, Multifix toolpost. The machine is in good condition and can be demonstrated under power by prior arrangement. Kwsdpfx Adjn Ard Djksw

Stanje: dober (rabljeno), Vlečni & navojni stružnica WEILER PRAKTIKANT 800 R - Premer struženja nad posteljo: 300 mm - Premer struženja nad suportom: 150 mm - Dolžina struženja: 800 mm - Vrtina vretena: 42 mm - Hitrostni razpon vretena: 40 - 2000 min⁻¹ - Avtomatski vzdolžni / prečni pomiki - Navojni program: metrično/palčno itd. - Hrbtna konica: MK 3 - Trivelična glava - Zadnja zaščitna stena za ostružke + delovna svetilka - Posoda za ostružke - Izmenjalna kolesa - Omara za orodje - Dokumentacija Mere: DxŠxV: 1,8 x 0,8 x 1,6 m / Teža: 750 kg Ksdox A Uktopfx Adkoww Napake in pomote pridržane.