Weiler E 50 nakup rabljenega (193)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, največja hitrost vretena: 2.500 obr/min, potovalna razdalja osi X: 340 mm, pomik po osi Z: 1.100 mm, skupna masa: 3.800 kg, število osi: 2, Horizontal lathe from 2007. This Weiler E55X1000 offers a maximum turning diameter of 315 mm and a center distance of 1100 / 2100 mm. It is equipped with a Sauter 8-position tool turret and a spindle speed range of 1 - 2500 rpm. If you are looking for a high-quality lathe, you should consider the Weiler E55X1000 we have for sale. Contact us for further details about this machine. • Internal taper: Metric 90 • Diameter of spindle in front bearing: 120 mm • Spindle bore: 83 mm • Flange diameter: 500 mm • Maximum turning diameter: 315 mm • Maximum torque: 1600 Nm • Tool system: Sauter 8-position • Number of tool stations: 8 • Tool shank size: 32 x 25 mm • Turret interface: Capto C4 • Number of compound slides: 1 • Center distance: 1100 / 2100 mm • Turning length: 340 mm • Tailstock taper: MT 5 • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Maximum tailstock travel: 1000 / 2000 mm Nledpfx Aboy Em A Asrec • Continuous operation speed (S1): Gear stage I: 89 rpm Gear stage II: 355 rpm • Emission level: 80 dB(A) • Operating voltage: 400 V • Control voltage: DC 24 V • Connected load: 30 kVA • Rated current: 43 A • Frequency: 50 Hz • Main fuses: 50 A • Condition note: The ball screw in the Z-axis produces noise, but dimensional accuracy is not affected. Additional equipment • Extraction system Technical Specification Counter Spindle: No Driven Tools: No

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, največja hitrost vretena: 2.500 obr/min, potovalna razdalja osi X: 340 mm, pomik po osi Z: 1.100 mm, skupna višina: 1.750 mm, skupna širina: 1.850 mm, skupna masa: 3.800 kg, največja dolžina izdelka: 2.850 mm, število osi: 2, Horizontal lathe from 2004. This Weiler E55X1000 features a maximum chuck diameter of 315 mm and a spindle diameter of 1 mm. It is equipped with a robust tool system with turret and offers a cutting speed of 140 m/min. If you are looking for a high-quality lathe, you should consider the Weiler E55X1000, which we are offering for sale. Contact us for further details. • kW = active power (mechanical/electrical output) • 27 kVA = apparent power (including reactive power) • Internal taper: metric 90 • Spindle diameter in front bearing: 1 mm • Spindle bore: 83 mm • Max. faceplate diameter: 500 mm • Maximum chuck diameter: 315 mm • Maximum torque: 1600 Nm • Tool system: turret (VDI 40) • Tool shank size: 32 x 25 mm • Number of longitudinal carriages: 1 • Number of cross slides: 1 • Centre distance: 1100 mm • Saddle travel: 340 mm • Tailstock taper: MK 5 • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 0 mm • Maximum tailstock travel: 1000 / 00 mm • Longitudinal feed rate: mm/rev • Cross feed: mm/rev • Rapid traverse longitudinal: 10 m/min • Rapid traverse cross: 5 m/min Nedpjy Em Avsfx Abrjlc • Longitudinal feed force: 10,000 N • Cross feed force: 7,000 N • Metric thread range: 0.1 – 250 mm • Whitworth thread range: 1/4 – 56 threads/inch • Module range: • DP range: 0.05 – 48 • Maximum cutting section: 2.25 mm² • Cutting speed: 140 m/min • Gear stage I: 89 rpm at 100% duty cycle • Gear stage II: 355 rpm at 100% duty cycle • Coolant consumption (normal): 30 l/min at 0.4 bar • Coolant consumption (increased): 30 l/min at 3.5 bar • Noise level: 80 dB(A) • Electrical: • Operating voltage: 400 V • Control voltage: DC 24 V • Connected load: 30 kVA • Rated current: 43 A • Frequency: 50 Hz • Main fuses: 50 A • Condition description: A small actuator for shifting between gear stages is defective; both gear stages are operational. Additional equipment • Chip conveyor Technical Specification Counter spindle: No Driven tools: No

Stanje: rabljeno, Leto izdelave: 2024, proizvajalec krmilnikov: Heidenhain, model krmilnika: ND 7013, Description: Technical Data Centre Height: 260 mm Swing Diameter over Bed: 535 mm Swing Diameter over Cross Slide: 345 mm Distance Between Centres: 1,500 mm Spindle Nose: DIN 55027/DIN ISO 702-3 size 6 Spindle Bore: 71 mm Spindle Diameter at Front Bearing: 100 mm Drive Power: 7.5 kW Speed Range: 33 – 1,500 rpm Metric Threads: 0.5 – 28 mm Nlodpfjyu Iliox Abrsc Quill Diameter: 65 mm Quill Travel: 120 mm Internal Taper: DIN 228 MK 4 Standard Equipment: - Way cover for leadscrew and feed shaft - Chip guard rear panel - Chuck guard with safety interlock - Chip deflector - Longitudinal stop with micrometer adjustment - Change gear door with safety interlock - Main drive braking system - Start-up clutch - LED machine lamp in chip guard rear panel - Quick-change tool post Multi Suisse size B - Incl. 1 quick-change holder BD 25120 - Coolant unit incl. coolant pump 30 l/min at 0.2 bar - Taper adapter sleeve MK5 for main spindle - Fixed centre MK5 - Central lubrication system - Tropical insulation up to max. 45° air temperature and max. 80% relative humidity - Oil gun - Set of service tools - Documentation Optional Equipment: - Set of mounting plates, 8 pieces - Digital position display mounted on arm over headstock - Packaging

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, obratovalne ure: 35.626 h, največja hitrost vretena: 3.000 obr/min, število osi: 2, Horizontal lathe from 1998. This Weiler E35 features a centre distance of 950 mm and a swing over bed of 410 mm. It has a spindle bore of 54 mm and a maximum spindle torque of 700 Nm. If you are looking for a high-quality lathe, you should consider the Weiler E35 that we have for sale. Contact us for further details. Centre distance: 950 mm Centre height: 200 mm Swing over bed: 410 mm Swing diameter over cross slide: 200 mm Cross slide travel: 230 mm Slideway length: 480 mm Spindle nose: DIN 55025 size 6 Nsdpfx Absy Axu Serolc Spindle bore: 54 mm Spindle taper: Morse taper 6 Drive power (100% / 60% duty cycle): 7.5 / 9 kW Maximum torque at spindle: 700 Nm Speed range: 1–3000 rpm Speed range gear stage I: 1–750 rpm Speed range gear stage II: 4–3000 rpm Tailstock quill diameter: 65 mm Tailstock quill travel: 120 mm Tailstock taper: Morse taper 4 Tool system: Parat size 2 Control: D2 Number of axes: 2 (X, Z) Technical Specification Counter spindle: No Driven tools: No

Stanje: pripravljen za uporabo (rabljen), L&Z stružnica WEILER LZ 330 z novo 3-osno digitalno merilno napravo (iz izobraževalnega zavoda) - 3-osna digitalna merilna naprava "NOVA" - Višina konic: 165 mm - Premer struženja nad posteljo: 330 mm - Dolžina struženja: 800 mm - Območje vrtljajev (menjalnik): 25–2800 min⁻¹ - Avtomatski vzdolžni / prečni pomiki - Nov osnovni nosilec Multifix z vložki - Trivpenjalna glava - Naprava za vpenjalne puše z 20 pušami - Originalna kopirna naprava - Razna oprema - Dokumentacija Dimenzije (DxŠxV): 1,8 x 0,7 x 1,6 m / Teža: 800 kg Nsdpfey Id Uhsx Abrjlc Pridržujemo si pravico do napak in tipkarskih napak.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Stružnica L & Z / WEILER DA 210x1000 / Z novim 3-osnim digitalnim prikazovalnikom -Leto izdelave 2005 -CE oznaka -Vodila v dobrem stanju Nlsdpfxjy H Ikqe Abrsc -POPOLNI TEHNIČNI PODATKI GLEJ FOTOGRAFIJE -Triosni digitalni prikazovalnik »NOVO« -Hitra vpenjalna naprava za vpenjalne tulke, vklj. 79 vpenjalnih tulk (173E) -Osnovno držalo Multifix z vložki -Tročeljustna glava -Električna zaščita glave -Dodatna zaščita z drsniki -Hladilni sistem -Vpenjalna glava za vrtanje / vrtljiva konica -Odzadna zaščita pred ostružki -Delovna svetilka -Kompletna dokumentacija Mere: DxŠxV 2,8x1,2x1,8 metra / Teža 1600 kg Pridržujemo si pravico do napak in sprememb.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 56 mm, višina središča: 180 mm, širina na sredini: 1.000 mm, Dear Sir or Madam, We are offering for sale a Weiler Commodor B lathe equipped with a new 3-axis digital readout from K+C (including 12 months manufacturer's warranty). The machine has undergone a comprehensive partial overhaul in our workshop and is therefore in excellent technical, geometric, and optical condition. You are welcome to inspect the machine on our premises. Availability: on request Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 - 0.888 mm/rev Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: selectable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (LxHxW) Weight: approx. 1.8 t Further equipment & accessories: New 3-axis K+C digital readout, coolant system, chuck guard, retractable chip tray, operator’s manual, and much more on request. Our service promise to you: Nedpfjwhzivox Abrjlc - We are a certified master company in mechanical engineering - All machines are at least workshop-tested - All lubricants and any worn parts are replaced in advance - On request, we can carry out a complete or partial overhaul of your chosen machine - On request, we can repaint your chosen machine in your desired colour - On request, you can order additional accessories such as tools etc. directly - On request, we can install further accessories such as safety devices, etc. - We are happy to arrange shipping and/or installation for you

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 40 mm, višina središča: 160 mm, širina na sredini: 650 mm, Dear Sir or Madam, For sale is a Weiler Praktikant 160B lathe equipped with a brand new 3-axis digital readout from K+C (including 12 months manufacturer's warranty). The machine is undergoing a comprehensive partial overhaul in our workshop to ensure it is in excellent technical and visual condition. All guides are in good order, the gearboxes run quietly, and all levers engage smoothly. You are welcome to inspect the machine and verify its condition in person at our premises. Availability: on request Centre height: 160 mm Centre distance: 650 mm Spindle bore: Ø 40 mm Tailstock taper: MT3 Quill travel: 85 mm Longitudinal feed range: 0.020 – 0.630 mm/rev Cross slide feed range: 0.006 – 0.200 mm/rev Thread types: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: switchable Total connected load: 7.5 kVA Voltage: 400 V Dimensions (LxHxW): approx. 1.58 x 0.9 x 1.5 m Weight: approx. 720 kg Additional equipment and accessories: New 3-axis digital readout, coolant system, chuck guard, leadscrew and feedshaft cover, 2x emergency stop, operating manual, and more upon request... Njdpfxewhzdmo Abrolc Our service promise to you: - We are a certified master workshop specialising in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can partially or fully overhaul the machine of your choice - Upon request, we can repaint the machine in your desired colour - Upon request, you can order additional accessories such as tooling directly - Upon request, we can install extra accessories, such as safety equipment - We are happy to arrange shipping and/or installation for you

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, višina središča: 160 mm, širina na sredini: 650 mm, največja hitrost vrtenja: 4.000 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Dear Sir or Madam, For sale is a Weiler Primus VC / Praktikant VC lathe. This model series is particularly distinguished by its Siemens control panel and fully stepless speed regulation. As the name suggests, the VC is capable of operating with a constant cutting speed. The machine undergoes a comprehensive partial overhaul in our workshop, ensuring it is in excellent technical and visual condition. All guides are in good condition, the gearboxes run smoothly, and the levers are easy to operate. You are welcome to visit us and see the condition of the machine for yourself. Availability: on request Centre height: 160mm Centre distance: 650mm Spindle bore: Ø 40mm Tailstock taper: MT3 Quill travel: 85mm Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Voltage: 400V Dimensions: approx. 1.60x1.00x1.50m (LxHxW) Weight: approx. 750kg Additional features and accessories: Siemens control panel, coolant system, chuck guard, leadscrew and feedshaft cover, 2x emergency stop, operating manual, CE declaration of conformity, and much more on request... Our service promise to you: Nlodpfjwhx I Nox Abroc - We are a certified master workshop specializing in mechanical engineering - All machines are at least workshop tested - All lubricants and any worn parts are replaced beforehand - Upon request, we can completely or partially overhaul your chosen machine - Upon request, we can repaint the machine in your preferred colour - Upon request, you can order additional accessories such as tools, etc. directly - Upon request, we can also install additional accessories such as safety devices, etc. - We are also happy to take care of shipping and/or on-site delivery

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stružnica Weiler Primus v vrhunskem stanju. Ogled pod napetostjo je možen. Tehnični podatki: Nlodpfjx Htf Hox Abrjc Razdalja med konicama: 450 mm Višina konice: 120 mm Vpenjalna odprtina vretena: 23 mm Obrati: 30 – 3000 obr/min Konjiček: MK 2 Pogonska moč: 1,5 kW Teža: 350 kg Dimenzije: 1200 x 650 x 1550 mm Cena znižana!

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, premer struženja: 410 mm, izvrtina vretena: 54 mm, največja hitrost vrtenja: 3.000 obr/min, skupna višina: 1.800 mm, skupna dolžina: 2.200 mm, skupna širina: 1.500 mm, teža obdelovanca (maks.): 700 kg, skupna masa: 2.100 kg, For sale is a Weiler E35 lathe. The machine is in good condition and fully operational. Technical data: Year of manufacture: 1994 Control: Siemens Sinumerik 805 Centre height: 200 mm Centre distance: 950 mm Max. turning diameter over bed: 410 mm Max. turning diameter over carriage: 200 mm Max. spindle speed: 3,000 rpm Tool changer: Multifix Spindle bore: 54 mm Max. workpiece weight: 700 kg Dimensions: approx. 2,200 x 1,500 x 1,800 mm Weight: approx. 2,100 kg Nledpfx Aoxu Ehgjbroc Transport and loading can be organised upon request, at an additional charge, Europe-wide. Prices exclude VAT. Viewing by appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase/Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your machine? For further information or to contact us, please visit our website.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1990, obratovalne ure: 51.392 h, skupna višina: 1.700 mm, skupna masa: 1.300 kg, This Weiler E30 was manufactured in 1990. A robust horizontal lathe featuring a spindle bore of 42 mm and a swing over bed of 330 mm. It supports a wide range of threading options, from metric to DP threads, and includes a Multifix tool post size B. Ideal for precise and versatile turning operations. Contact us for further details regarding this machine. Additional Equipment • Multifix tool post size B installed • Fixed steady rest (option) clamping range: 15–100 mm • Travelling steady rest (option) clamping range: 10–85 mm • Collets from 3 mm (in 0.5 mm increments) • Tailstock with a MT3 taper Machine Advantages Technical Specifications • Drive power 100%/60% duty cycle: 9/11 kW • Max. spindle torque: 180 Nm • Total speed range: 1–4500 rpm • Feed drive: three-phase AC feed motor • Longitudinal feed range: 0–20 mm/rev • Rapid traverse longitudinal/cross: 10/7.5/5/3.5 m/min • Quill diameter: 50 mm • Quill stroke: 110 mm • Quill internal taper: MT3 Additional Information Swing over cross slide: 160 mm Bed width: 240 mm Cross slide travel: 180 mm Saddle guideway length: 395 mm Tool section (height/width): 20 × 20 mm Spindle nose according to DIN 55027 size 5 Nodpjyaimfjfx Abrelc Front bearing spindle diameter: 70 mm Main spindle internal taper: MT5 Workpiece: Metric thread pitch range: 0.1–400 mm Imperial thread pitch range: G/1" 1/4–56 Module thread range: mm DP thread range: 1–224 G/" Maximum number of threads: 50 Dimensions Machine depth 1800 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, moč vretenovega motorja: 45.000 W, skupna višina: 2.120 mm, skupna masa: 11.500 kg, proizvajalec krmilnikov: SIEMENS, model krmilnika: 810 D, največja dolžina izdelka: 5.400 mm, število osi: 2, This Weiler E120x3000 was manufactured in 2001. It features a center distance of 3000 mm, a center height of 600 mm, and a swing diameter over bed of 1200 mm. The spindle bore is 165 mm, and it offers a robust main drive with a power output of 45/37 kW. The machine is ideal for heavy-duty turning operations and is supplied with accessories including a chuck, faceplate, and steady rest. Please contact us for more information about this machine. • Working area: • Distance between centers: 3000 mm • Center height: 600 mm • Swing diameter over bed: 1200 mm • Swing diameter over cross slide: 830 mm • Cross slide travel: 590 mm • Bed slide guide length: 860 mm • Turning tool cross-section (H x W): 40 x 40 mm • Tool holder: Parat size 4 • Spindle: • Spindle nose DIN 55027 / 55026, size 15 • Spindle bore: 165 mm • Main spindle taper: metric 171 • Main drive: • Drive power (60% / 100% duty cycle): 45 / 37 kW • Max. spindle torque: 8000 Nm • Speed range, gearbox stage 1: 1-280 rpm • Speed range, gearbox stage 2: 4-900 rpm • Tailstock: • Quill diameter: 140 mm • Quill stroke: 300 mm • Quill internal taper: MK 6 • Machine dimensions and weight: • Overall length: 5400 mm (without chip conveyor), 6535 mm (with chip conveyor) • Overall width: 2600 mm • Overall height: 2120 mm • Machine weight: 11,500 kg • Overhaul works: • Hardening and grinding of all bed ways • Grinding of tailstock guides • Overhaul of complete bed and cross slide unit (grinding/scraping of all guides) • Renewal of the bed slide's sliding surface • Renewal or shimming of keyways and floor guides • Renewal of all wipers • Replacement of all belts • Overhaul of the main spindle assembly in the headstock • Renewal of X-axis including bearings • Renewal of Z-axis including bearings • Overhaul of the tailstock quill (regrinding MK 6 taper), replacement of spindle and nut • Adjustment of the tool system • Replacement of main spindle motor • Inspection of auxiliary motors (X and Z-axes) • Overhaul of existing safety guards (sliding cover/claw protection) • Replacement of all rotary, tilt, and limit switches • Replacement of spindle and handwheel encoders • Renewal of flexible cables and coolant hoses in the work area • Replacement of the central lubrication system • Renewal of energy chains • Painting according to specification (standard structural basalt and light grey) • Installation and geometric inspection of the machine as per DIN 8605 Additional equipment Nljdpsx D Hz Tefx Abrec • 1x used chuck Ø630 mm with various jaws • 1x used faceplate Ø1100 • 1x used steady rest, max. Ø300 • 1x used chip conveyor

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Readout, newly overhauled, including acceptance protocol for new machine tolerances Technical Data: >> Machine No.: 2268-87 >> Centre height: 180 mm >> Distance between centres: 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 Camlock >> Tailstock: MT 4 >> Feeds from 0.026 to 0.888 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Switchable spindle brake >> Drive power: 2.0/4.0 kW >> Dimensions: length 2.2 m, height 1.5 m, depth 1 m Accessories and Equipment: Nedpfx Aboymznhjrelc >> New K&C 3-axis digital readout, 12 months manufacturer’s warranty, with operating manual >> New 200 mm 3-jaw chuck, 2 sets of jaws >> Multifix size B with 3 new tool holders >> Bed stop >> Machine mounts >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stop buttons On request: Covers for lead and feed screws About the machine: Offered here is a Weiler Commodor lead and feed screw lathe, geometrically overhauled. The guides have been reground or newly scraped. Acceptance according to inspection protocol. Painted in 2K glossy white. Accessories such as Multifix and chuck are new. For safety: The machine features a brake motor, electronic spindle guard, and two emergency stops. This is an as-new condition lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely operator-friendly and allows for ground-like surface finishes. Take the opportunity to view and test this machine on site under power and see the condition for yourself.

Stanje: dober (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 160 mm, izvrtina vretena: 36 mm, premer struženja: 300 mm, višina središča: 150 mm, širina na sredini: 500 mm, skupna dolžina: 1.500 mm, skupna širina: 800 mm, skupna višina: 1.300 mm, največja hitrost vretena: 3.550 obr/min, hitrost vretena (min.): 15 obr/min, skupna masa: 1.000 kg, Konvencionalni precizni stružni stroj z vpenjalno napravo za klešče, višina konic 150 mm, razdalja med konicama 500 mm, premer izvrtine Ø 36 mm, 18 hitrosti vrtenja 15 - 3550 min⁻¹, motor 3 kW, oprema: naprava za hlajenje, vpenjalna naprava za klešče, 3-čeljustna glava, vrtalna glava, stružni konjiček, hitromenjalni držalo RAPID s 5 vložki, strojna svetilka, vzdolžni prislon, mere 150x80x130 cm, teža ca. 1000 kg. Nlsdjx Urmlepfx Abrsc

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C, NEWLY Refurbished with acceptance protocol certifying tolerances to new-machine standards Technical Data: >> Machine No. 1824 >> Centre height: 180 mm >> Centre distance: 1,000 mm >> Spindle speeds: from 13 to 2,000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 size 5 >> Tailstock: MT 4 >> Feeds: 0.026 to 0.888 mm/rev >> Threads possible: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.35 to 12 mm >> Weight approx. 1,500 kg >> Spindle brake switchable >> Drive power: 2.0/4.0 kW Njdovrcqdepfx Abrolc >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer's warranty with operating manual Features: switching mm/inch, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, direction of counting selectable >> 3-jaw chuck with wedge bars, nearly new, 200 mm, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stop buttons Optional: Lead and feed screw covers About the Machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Certification to inspection protocol. Painted in 2K high-gloss white. All accessories, including Multifix and chuck, are new. Safety: The machine features a brake motor, electronic spindle guard, and two emergency stop buttons – making this an as-new lathe. The Weiler runs very smoothly even at high speeds. This newer generation of Weiler lathes is highly user-friendly and allows you to produce ground-quality surfaces. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout (K&C), Fully Refurbished to Factory Tolerances with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Camlock Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Thread Cutting Capabilities: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: from 0.35 to 12 mm Nedpfx Asvrckqsbrolc >> Weight: approx. 1500 kg >> Spindle Brake (switchable) >> Motor Power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer warranty with user manual Features: Conversion mm/inch, coordinate selection ABS/INC, value halving, reference mark, 200 tool programming slots, taper calculation, radius/diameter, one-touch zeroing, count direction switching >> 200 mm 3-jaw scroll chuck with soft jaws (almost new), 1 set of jaws >> Multifix size B with 2 tool holders, NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the Machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. The guideways have been newly ground and scraped. Inspection executed according to test protocol. 2K glossy white paint. The Multifix tool post and chuck are new. Safety features include a braked motor, electronic spindle guard, and two emergency stop switches, making this lathe in absolutely as-new condition. The machine runs very smoothly even at high spindle speeds. This latest generation of Weiler lathes is highly user-friendly and capable of producing ground-like surface finishes. You are welcome to inspect the machine under power on-site and verify its condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Bench Lathe – Excellent Condition !!! Technical Data: >> Machine No. 2801 >> Center Height: 120 mm >> Distance Between Centers: 430 mm >> Spindle Speed: 60 - 3000 rpm in 18 gear steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 55027 Nedpev Tyzcofx Abrolc >> Tailstock Morse Taper: MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 2.5 mm >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 pc Röhm 125 mm three-jaw chuck with 4 sets of jaws >> Collet system with collets from 2 mm to 12 mm in 1 mm increments, including drawbar >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle guard >> Clamping tools About the Machine: Offered is a Weiler Primus lead and feed screw bench lathe in very good condition. The machine is, of course, fully functional. All carriages move very smoothly and evenly. The Weiler runs quietly, even at high spindle speeds. This Primus comes from a government facility where it saw little use. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. Take the opportunity to inspect the machine under power on site and convince yourself of its condition. (The base cabinet is included; the machine is not bolted to it.) Digital readout available at additional cost.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout (NEW) Geometrically overhauled with an acceptance report certifying tolerances compliant with new machine standards. Technical Data: >> Machine No.: 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock Morse Taper: MK 3 >> Feeds: 0.015 to 0.46 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle Brake (switchable) >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Accessories: >> 3-axis digital readout from K&C (new), 12 months manufacturer's warranty, operating manual included Functions: mm/inch selection, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, selectable counting direction >> NEW collet chuck, NEW collet set 3–26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws (NEW) >> Multifix (Quick-Change Toolpost) Size B (NEW) with 3 tool holders >> Bed stop >> Electrical chuck guard (NEW) >> Rear splash guard >> Operating manual >> Coolant system >> Machine levelling feet Nedswrm Dtopfx Abrslc About the Machine: A Weiler Condor 81 lead and feed screw lathe is being offered in excellent, geometrically overhauled condition. The slides have been newly ground or hand-scraped. Delivered with an inspection protocol. The accessories, collets, and chuck are all new. For safety: The machine is equipped with a braking motor, electronic spindle guard, and two emergency-stop buttons—a lathe in as-new condition. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and capable of producing surfaces comparable to grinding. Take the opportunity to view and test the machine under power on site to convince yourself of its condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C NEW Technical Data: >> Year of Manufacture: 1986 >> Machine No.: 86-160-348 Nlsdpfx Ajwthbiobrec >> Centre Height: 160 mm >> Centre Distance: 650 mm >> Spindle Speeds: 8 steps, from 96 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027, Size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric Thread Pitches: from 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake can be engaged >> Dimensions (LxHxW): 1.6 m x 1.25 m x 0.7 m Accessories and Equipment: >> 3-axis Digital Readout from K&C, new, 12-month manufacturer's warranty with operating manual Functions: mm/inch conversion, ABS/INC coordinate selection, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> Collet chuck system, collets as new, range 1–29 mm in 1 mm increments >> New 160 mm three-jaw chuck with 2 sets of jaws >> Multifix toolpost size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear splash guard >> Machine feet >> Coolant system About the machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe with toolroom accuracy, in very good condition. The machine is, of course, fully functional. The Weiler has been completely dismantled, refurbished, and repainted in light grey. All carriages move very smoothly and evenly. The machine runs quiet even at high speeds. This newer generation of Weiler lathes is very user-friendly and can achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see the condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor B with Lead and Feed Screw, 3-Axis Digital Readout by K&C, NEW, CE Compliant! Technical Specifications: >> Machine No.: 2442, Year of manufacture: 1997 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 (MT 3) >> Feeds from 0.015 to 0.46 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm Nljdpfx Abjxcuazjrec >> Weight approx. 1100 kg >> Switchable spindle brake >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and Features: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty with operating manual Functions: mm/inch conversion, coordinate choice ABS/INC, value halving, reference mark, tool programming (200 tools), taper calculation, radius/diameter, one-touch zeroing, count direction switching >> 1 piece new 3-jaw chuck 160 mm, 2 sets of jaws >> 1 piece 4-jaw chuck 200 mm, 1 set of jaws >> New collet chuck and new collets from 3 to 25 mm in 1 mm increments >> Multifix size B quick-change tool post with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear cover >> Machine feet Safety features: electronic spindle guard, 2 emergency stop buttons, change gear box with limit switch, spindle brake About the machine: Offered is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our premises.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4397, Dear Sir or Madam, For sale is a Weiler Praktikant 160 AC lathe, year of manufacture 1998, equipped with an original Weiler 3-axis digital readout. This newer "AC" version stands out due to its infinitely variable speed control, which further enhances operation on this already very user-friendly machine. The machine has undergone extensive partial refurbishment in our workshop, bringing it to excellent technical and optical condition. All guideways are in good order, the gearboxes run quietly, and the levers switch smoothly. You are welcome to inspect the machine and verify its condition in person at our premises. Availability: on request Machine No.: 4397 Year of manufacture: 1998 Centre height: 160 mm Centre distance: 650 mm Spindle bore: Ø 40 mm Spindle speed: 20-3000 rpm, stepless Tailstock taper: MT3 Quill stroke: 85 mm Longitudinal slide feed range: 0.020 - 0.630 mm/rev Cross slide feed range: 0.006 - 0.200 mm/rev Thread types possible: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.25 - 8 mm Nlodpfx Absq H D U Eerjc Spindle brake: switchable Total connected load: 7.5 kVA Voltage: 400 V Dimensions (LxHxW): approx. 1.58x0.9x1.5 m Weight: approx. 720 kg Additional equipment & accessories: 3-axis digital readout, coolant system, chuck guard, 3-jaw chuck, and further accessories upon request... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul the selected machine - On request, we can repaint your chosen machine in your preferred colour - On request, you can order additional accessories such as tools directly - On request, we can also install additional accessories such as safety devices etc. - We are happy to arrange shipping and/or on-site installation

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 40 mm, višina središča: 160 mm, širina na sredini: 650 mm, poteza s peresom: 85 mm, skupna dolžina: 1.600 mm, skupna širina: 900 mm, skupna višina: 1.500 mm, Dear Sir or Madam, For sale is a Weiler Praktikant 160B lathe equipped with a 3-axis digital readout. The machine has undergone extensive partial refurbishment in our workshop, ensuring it is in excellent technical and visual condition. All guides are in good condition, the gearboxes run smoothly and quietly, and the levers switch easily. You are welcome to inspect the machine onsite to assess its condition for yourself. Availability: on request Centre height: 160 mm Centre distance: 650 mm Spindle bore: Ø 40 mm Tailstock taper: MT3 Quill travel: 85 mm Longitudinal feed range: 0.020 – 0.630 mm/rev Cross feed range: 0.006 – 0.200 mm/rev Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: switchable Nlsdpfxsu H U S Ho Abrjc Total connected load: 7.5 kVA Voltage: 400 V Dimensions: approx. 1.58 x 0.9 x 1.5 m (LxHxW) Weight: approx. 720 kg Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, chuck, further accessories available on request... Our service promise to you: - We are a certified master craftsman business specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and, where necessary, worn parts are replaced beforehand - Upon request, we can completely or partially overhaul your chosen machine - Upon request, we can repaint your selected machine in your preferred color - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories like safety devices - We are happy to arrange shipping and/or installation for you

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 40 mm, višina središča: 165 mm, širina na sredini: 750 mm, Dear Sir or Madam, We are offering for sale a Weiler Condor B lathe. This model stands out for its exceptionally user-friendly operation and an excellent ratio of footprint to center height and center distance. The Condor B is positioned between the Weiler Praktikant and Weiler Commodor models, making it a true all-rounder for any workshop. The machine has been partially overhauled in our workshop, ensuring that it is in excellent technical and optical condition. All guides are in good order, the gearboxes run smoothly and quietly, and the levers can be shifted with ease. You are welcome to inspect the machine on-site to verify its condition. Availability: upon request Centre Height: 165mm Centre Distance: 750mm Spindle Bore: Ø 40mm Nsdpew N Np Sjfx Abrolc Tailstock Taper: MT3 Chuck Mount: Short Taper DIN55027 Size 5 with bayonet lock Quill Travel: 85mm Speeds: 22–2800 rpm Thread Types: Metric, Imperial, Module, Diametral Pitch Metric Thread Pitches: 0.18–28mm Spindle Brake: Switchable Voltage: 400V Dimensions: approx. 1.80 x 1.30 x 0.9 m (L x H x W) Weight: approx. 1100 kg Additional features and accessories: 3-axis digital readout K+C (NEW), chuck guard (NEW), coolant system, 2x emergency stops, lead- and feed screw covers (optional), operating manual, and much more on request. Our service promise to you: - We are a certified master craftsman company specializing in mechanical engineering. - All machines are at least workshop tested. - All lubricants and, if necessary, worn components are replaced prior to sale. - On request, we can provide a partial or complete overhaul of the selected machine. - On request, we can repaint the selected machine in your desired color. - On request, you can order additional accessories such as tools directly from us. - On request, we can also install further accessories such as safety equipment. - We are happy to organize shipping and/or installation for you.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3595, Dear Sir or Madam, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone a comprehensive partial overhaul in our workshop. Among other things, both the main spindle bearings and the leadscrew/feedshaft bearings have been completely renewed! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to inspect on-site. Nodpfxjthd Shs Abrslc Availability: on request Machine No.: 3595 Year of manufacture: 2001 Center height: 180 mm Center distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 - 0.888 mm/rev Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions (LxHxW): approx. 2.2 x 1.5 x 1 m Weight: approx. 1.8 t Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, pull-out chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various chuck jaws... Our service promise to you: - We are a certified master workshop specializing in mechanical engineering. - All machines are thoroughly inspected. - All lubricants and, if necessary, worn parts are replaced in advance. - Upon request, we can carry out a complete or partial overhaul of the machine of your choice. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools directly. - Upon request, we can also install further accessories such as safety equipment, etc. - We are happy to arrange shipping and/or installation for you.