Weiler E 50 nakup rabljenega (178)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Pomembnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum objave
- Najstarejši oglasi
- Datum objave
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Nazadnje posodobljeno
- Najstarejša posodobitev
- Nazadnje posodobljeno
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- Pomembnost
- Pomembnost
WEILER
Mali oglas
Ubstadt-Weiher
585 km
Center stružnica
WeilerPrimus Tischdrehmaschine
Klic
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Bench Lathe – Excellent Condition !!!
Njdpfx Abjv Tyzcsbscl
Technical Data:
>> Machine No. 2801
>> Center Height: 120 mm
>> Distance Between Centers: 430 mm
>> Spindle Speed: 60 - 3000 rpm in 18 gear steps
>> Spindle Bore: 23 mm
>> Short Taper Spindle Nose DIN 55027
>> Tailstock Morse Taper: MK 2
>> Feeds from 0.03 to 0.15 mm/rev
>> Possible Threads: Metric, Imperial, Module, and Diametral Pitch
>> Metric Thread Pitches from 0.25 to 2.5 mm
>> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m
Accessories and Equipment:
>> 1 pc Röhm 125 mm three-jaw chuck with 4 sets of jaws
>> Collet system with collets from 2 mm to 12 mm in 1 mm increments, including drawbar
>> Multifix size A with 4 tool holders
>> Change gears
>> Fixed steady rest
>> Faceplate
>> Spindle guard
>> Clamping tools
About the Machine:
Offered is a Weiler Primus lead and feed screw bench lathe in very good condition. The machine is, of course, fully functional. All carriages move very smoothly and evenly. The Weiler runs quietly, even at high spindle speeds. This Primus comes from a government facility where it saw little use. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. Take the opportunity to inspect the machine under power on site and convince yourself of its condition. (The base cabinet is included; the machine is not bolted to it.)
Digital readout available at additional cost.
Mali oglas
Ubstadt-Weiher
585 km
Center stružnica
WeilerCondor B Geometrisch Überholt
Klic
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Engine Lathe Model Condor B, Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout NEW
Geometrically overhauled with inspection protocol for new machine tolerances!
Technical Data:
>> Machine No. 90-1495
>> Center height: 165 mm
>> Center distance: 750 mm
>> Spindle speeds: from 22 to 2800 rpm
>> Spindle bore: 40 mm
>> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock
Nsdpfx Absvambcjbecl
>> Tailstock MT 3
>> Feeds from 0.015 to 0.46 mm/rev
>> Thread cutting: metric, imperial, module, and diametral pitch
>> Metric thread pitches from 0.18 to 28 mm
>> Weight approx. 1100 kg
>> Switchable spindle brake
>> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m
Equipment and Features:
>> New K&C 3-axis digital readout, 12 months manufacturer's warranty with operation manual
Functions: switching mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching
>> Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments
>> 160 mm three-jaw chuck with 2 sets of jaws, NEW
>> Multifix quick-change toolpost, size A, with 2 tool holders, NEW
>> Bed stop
>> Electric chuck guard NEW
>> LED machine lamp NEW
>> Rear safety cover
>> Operating manual
>> Coolant system
>> Machine feet
About the machine:
For sale is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, like-new condition. All guides have been newly ground or hand-scraped. Delivered with a test protocol upon acceptance. This is an excellent machine with electronic spindle protection. All accessories such as collets, chuck, and Multifix toolpost are new. Spindles, spindle nuts, bearings, belts, and wipers have been replaced. Take the opportunity to inspect this machine under power at our site and convince yourself of its condition.
Mali oglas
Ubstadt-Weiher
585 km
Center stružnica
WeilerPraktikant 160B Geometrisch Überholt
Klic
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160B Precision Centre Lathe – 3-Axis K&C Digital Readout System (NEW)
Refurbished with acceptance protocol confirming new machine tolerance levels.
Technical Data:
>> Machine Number: 87 160 760
>> Centre Height: 160 mm
>> Distance Between Centres: 650 mm
>> Spindle Speeds: 24 to 2500 rpm
>> Spindle Bore: 40 mm
>> Short Taper Spindle Nose DIN 55027 Size 5 with bayonet lock
>> Tailstock: Morse taper MK 3
>> Feed Rates: 0.02 to 0.63 mm/rev
>> Thread cutting: metric, inch, module, and diametral pitch threads
>> Metric Thread Pitches: 0.25 to 8 mm
>> Weight: approx. 680 kg
>> Spindle brake, switchable
>> Dimensions (L x H x D): 1.6 m x 1.25 m x 0.7 m
Accessories & Equipment:
>> 3-axis K&C digital readout system (new), including 12-month manufacturer's warranty and operating manual
Functions: mm/inch switching, coordinate mode ABS/INC, value halving, reference mark, tool memory for up to 200 tools, taper calculation, radius/diameter display, instant zero reset, and count direction switching
>> New collet system, collets NEW from 3 to 25 mm in 1 mm increments
>> Three-jaw chuck 160 mm, new, with 2 sets of jaws
>> Multifix size A toolpost system with 3 tool holders
>> Electronic spindle protection
Nsdpevrdlcsfx Abbecl
>> New LED machine lamp
>> New machine mounts
>> Splash guard
>> Operating manual, spare parts list (PDF)
About the Machine:
For sale is a Weiler Praktikant 160 B lead and feed screw lathe meeting toolroom precision, in fully overhauled geometric condition. Refurbished, with acceptance protocol confirming new machine tolerance specification. For operator safety: electronic spindle protection, covered lead and feed screws, 2 emergency stops, and a braking motor. This newer generation of Weiler lathes is highly operator-friendly and can produce ground-quality surface finishes. You are welcome to inspect the machine under power onsite and verify its condition firsthand.

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
Ubstadt-Weiher
585 km
Center stružnica
WeilerCondor 81 Geometrisch Überholt
Klic
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout (NEW)
Geometrically overhauled with an acceptance report certifying tolerances compliant with new machine standards.
Technical Data:
>> Machine No.: 84-121
>> Centre Height: 165 mm
>> Centre Distance: 750 mm
>> Spindle Speeds: 22 to 2800 rpm
>> Spindle Bore: 40 mm
>> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock
Nodpfx Abswrm Dtobecl
>> Tailstock Morse Taper: MK 3
>> Feeds: 0.015 to 0.46 mm/rev
>> Thread Cutting: Metric, Inch, Module, and Diametral Pitch
>> Metric Thread Pitches: 0.18 to 28 mm
>> Weight: approx. 1100 kg
>> Spindle Brake (switchable)
>> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m
Equipment and Accessories:
>> 3-axis digital readout from K&C (new), 12 months manufacturer's warranty, operating manual included
Functions: mm/inch selection, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, selectable counting direction
>> NEW collet chuck, NEW collet set 3–26 mm in 1 mm increments
>> 160 mm 3-jaw chuck with 2 sets of jaws (NEW)
>> Multifix (Quick-Change Toolpost) Size B (NEW) with 3 tool holders
>> Bed stop
>> Electrical chuck guard (NEW)
>> Rear splash guard
>> Operating manual
>> Coolant system
>> Machine levelling feet
About the Machine:
A Weiler Condor 81 lead and feed screw lathe is being offered in excellent, geometrically overhauled condition. The slides have been newly ground or hand-scraped. Delivered with an inspection protocol.
The accessories, collets, and chuck are all new.
For safety: The machine is equipped with a braking motor, electronic spindle guard, and two emergency-stop buttons—a lathe in as-new condition. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and capable of producing surfaces comparable to grinding. Take the opportunity to view and test the machine under power on site to convince yourself of its condition.
Mali oglas
Ubstadt-Weiher
585 km
Center stružnica
WeilerPraktikant 160B Teilüberholt
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C NEW
Technical Data:
>> Year of Manufacture: 1986
>> Machine No.: 86-160-348
>> Centre Height: 160 mm
>> Centre Distance: 650 mm
>> Spindle Speeds: 8 steps, from 96 to 2500 rpm
>> Spindle Bore: 40 mm
>> Short Taper Spindle Nose DIN 55027, Size 5, with bayonet lock
>> Tailstock: MT 3
>> Feeds: from 0.02 to 0.63 mm/rev
>> Thread Cutting: Metric, Inch, Module, and Diametral Pitch threads possible
>> Metric Thread Pitches: from 0.25 to 8 mm
Njdpfx Aswthbisbbocl
>> Weight: approx. 680 kg
>> Spindle brake can be engaged
>> Dimensions (LxHxW): 1.6 m x 1.25 m x 0.7 m
Accessories and Equipment:
>> 3-axis Digital Readout from K&C, new, 12-month manufacturer's warranty with operating manual
Functions: mm/inch conversion, ABS/INC coordinate selection, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching
>> Collet chuck system, collets as new, range 1–29 mm in 1 mm increments
>> New 160 mm three-jaw chuck with 2 sets of jaws
>> Multifix toolpost size A with 3 tool holders
>> Electric chuck guard
>> Bed stop
>> Rear splash guard
>> Machine feet
>> Coolant system
About the machine:
For sale is a Weiler Praktikant 160 B lead and feed screw lathe with toolroom accuracy, in very good condition. The machine is, of course, fully functional. The Weiler has been completely dismantled, refurbished, and repainted in light grey. All carriages move very smoothly and evenly. The machine runs quiet even at high speeds. This newer generation of Weiler lathes is very user-friendly and can achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see the condition for yourself.
Mali oglas
Jonschwil
474 km
Klasični stružnica
WEILERErgodor
Klic
Stanje: dober (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 160 mm, izvrtina vretena: 36 mm, premer struženja: 300 mm, višina središča: 150 mm, širina na sredini: 500 mm, skupna dolžina: 1.500 mm, skupna širina: 800 mm, skupna višina: 1.300 mm, največja hitrost vretena: 3.550 obr/min, hitrost vretena (min.): 15 obr/min, skupna masa: 1.000 kg, Konvencionalni precizni stružni stroj z vpenjalno napravo za klešče, višina konic 150 mm, razdalja med konicama 500 mm, premer izvrtine Ø 36 mm, 18 hitrosti vrtenja 15 - 3550 min⁻¹, motor 3 kW, oprema: naprava za hlajenje, vpenjalna naprava za klešče, 3-čeljustna glava, vrtalna glava, stružni konjiček, hitromenjalni držalo RAPID s 5 vložki, strojna svetilka, vzdolžni prislon, mere 150x80x130 cm, teža ca. 1000 kg.
Nedpfxjx Urmle Abbocl
Mali oglas
Ennepetal
801 km
Ponovno struženje
WEILERkonventionell
Klic
Stanje: rabljeno, Swing diameter over bed / mm
Nodowgi Tmspfx Abbjcl
Swing diameter over cross slide / mm
Turning length / mm
Mali oglas
Ubstadt-Weiher
584 km
Strug vodeni z vezave ciklov
WEILERE35
Klic
Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 200 mm, izvrtina vretena: 54 mm, premer struženja: 410 mm, širina na sredini: 950 mm, višina središča: 200 mm, največja hitrost vretena: 3.000 obr/min, skupna masa: 2.100 kg, Oprema: dokumentacija / priročnik, Dear Sir or Madam,
For sale is a CNC cycle lathe of the type WEILER E35. Thanks to the Siemens 805 cycle control and the electronic handwheels, operation is very simple and extremely comfortable. The machine has been thoroughly inspected in our workshop, is fully functional, and can be tested under power at any time. We look forward to your inquiry!
Our service promise to you:
- We are a certified master craftsman’s business specializing in mechanical engineering
- All machines are thoroughly checked
- All lubricants and, if necessary, worn parts are replaced in advance
- Upon request, we can completely or partially overhaul the machine of your choice
Ncjdpfx Abjyaluljbol
- You are free to choose the color of your selected machine
- Upon request, you can order additional accessories, such as tools, directly
- On request, we can also install further accessories such as safety devices for you
- We are happy to arrange shipping and/or installation for you
Mali oglas
Weiterstadt
632 km
CNC stružnica
WeilerCondor 81 Leit- und Zugspindeldrehmasch
Klic
Stanje: dober (rabljeno), številka stroja/vozila: 86388, Weiler Condor 81 univerzalni stružnica z vodilno in pogonsko vreteno
Dolžina struženja: 750 mm
Višina konic: 165 mm
Premer vretena: 40 mm
Hitrost vrtenja: 45–2.800 min⁻¹
Dimenzije (D x Š x V): 1.832 x 880 x 1.290 mm
Nsdpfx Aex Sd Hfebbscl
Z digitalnim prikazom Heidenhain in obilico dodatne opreme!
Klik
Italija
514 km
CNC stružnica
WeilerE70/3 NC
Stanje: rabljeno, Leto izdelave: 1997, Stružnica Weiler E70/3 NC s krmilnikom Siemens CNC, triodjelni vpenjalni tulec 400 mm, premer obdelave nad posteljo 780 mm, 4-pozicijski hitroizmenljivi nosilec orodij, maksimalna hitrost vretena 1800 obr/min, konjiček, razdalja med konicama 3000 mm. Serijska št. 136 (1997) - CE oznaka
Nodpfex Trzyex Abbocl
Opomba: Ti stroji se nahajajo v Ferrari, Italija. Vsa vsakršna orodja so na voljo izključno tako, kot je opisano.
Mali oglas
Wijchen
922 km
Horizontalni stružnice Weiler E35 1997
WeilerE35
Klic
Stanje: rabljeno, Leto izdelave: 1997, - Leto izdelave: 1997
- Dokumentacija na voljo: Da
- CE oznaka prisotna: Da
- CE certifikat prisoten: Ne
- Serijska številka: 270
- Upravljanje: Teach-in
- Višina konic [mm]: 210
- Premer struženja nad posteljo [mm]: 420
- Razdalja med konicami [mm]: 900
- Premer vretena [mm]: 55
- Min. hitrost vretena [v/min]: 4
- Max. hitrost vretena [v/min]: 3000
- Opcije: Digitalni prikaz
- Tip digitalnega prikaza: Weiler
- Krmiljenje: CNC
Ncsdpfx Abjwnh I Sebsl
Finančne informacije
DDV: Naveden cena je brez DDV
DDV/Obdavčenje razlike: DDV je odbitna za podjetja
Dostava in odkup možna kadarkoli za vse industrijske stroje
Lukas van Rossum
Mali oglas
Burgoberbach
476 km
CNC stružnica
WeilerVoest-Alpine Steinel E35
Klic
Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, premer struženja: 410 mm, izvrtina vretena: 54 mm, največja hitrost vrtenja: 3.000 obr/min, skupna višina: 1.800 mm, skupna dolžina: 2.200 mm, skupna širina: 1.500 mm, teža obdelovanca (maks.): 700 kg, skupna masa: 2.100 kg, For sale is a Weiler E35 lathe.
The machine is in good condition and fully operational.
Technical data:
Year of manufacture: 1994
Control: Siemens Sinumerik 805
Centre height: 200 mm
Centre distance: 950 mm
Max. turning diameter over bed: 410 mm
Ncedpfx Aboxu Ehgjbol
Max. turning diameter over carriage: 200 mm
Max. spindle speed: 3,000 rpm
Tool changer: Multifix
Spindle bore: 54 mm
Max. workpiece weight: 700 kg
Dimensions: approx. 2,200 x 1,500 x 1,800 mm
Weight: approx. 2,100 kg
Transport and loading can be organised upon request, at an additional charge, Europe-wide.
Prices exclude VAT.
Viewing by appointment possible. Please contact us—our team will be happy to assist you.
Trade-in or exchange possible!
Machinery Purchase/Sale
PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC.
Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your machine?
For further information or to contact us, please visit our website.
Mali oglas
Beringen
518 km
Ciklična stružnica
WEILERE35
Klic
Stanje: zelo dobro (rabljeno), Swing diameter over bed: 410 mm
Centre distance: 1,000 mm
Spindle speeds: 4–3,000 rpm
Control: WEILER
Various accessories
Ncedpfx Aek D S Rqjbbel
MARCELS MASCHINEN CH
Mali oglas
Nemčija
650 km
Vodoravni stroj za struženje
WeilerE120x3000
Klic
Leto izdelave: 2001, Stanje: pripravljen za uporabo (rabljen), Splošni podatki
Teža stroja: 11.500 kg
Višina stroja: 2.120 mm
Krmilna enota
Znamka: SIEMENS
Model: 810 D
Dimenzije
Dolžina stroja: 5.400 mm
Ncodpox D Hz Tofx Abbsl
Glavni pogon
Število osi: 2
Moč glavnega vretena: 45 kW
Stružnica Weiler E120x3000 je bila izdelana leta 2001. Ima razdaljo med konicama 3.000 mm, višino konice 600 mm in premer vrtenja nad posteljo 1.200 mm. Premer vretena je 165 mm, glavni pogon pa nudi moč 45/37 kW. Stroj je primeren za zahtevna struženja in vključuje dodatno opremo, kot so stružna glava, čelna plošča in podpora. Za dodatne informacije o stroju nas kontaktirajte.
Uporaba
Struženje
Mali oglas
Weiterstadt
632 km
Center stružnica
WeilerErgodor
Klic
Stanje: zelo dobro (rabljeno), Weiler Ergodor Lathe
Max. turning diameter over bed: approx. 320 mm
Max. turning diameter over cross slide: approx. 160 mm
Max. turning length: approx. 470 mm
Bar capacity: approx. 36 mm
Spindle:
Speed range: approx. 30 - 3,550 rpm
Spindle nose: A 2-5
Drive power: approx. 3.0 kW
Ncsdpfxsq Ixxyj Abbel
Automatic longitudinal and face feeds:
Feed range: approx. 0.020 - 2.0 mm/rev
Suitable for threading:
- Metric thread: 0.20 - 12 mm
- Inch thread: 80 - 2 TPI
- Diametral pitch thread: 160 - 5.5 DP
- Module: 0.1 - 4
Mali oglas
Iserlohn
793 km
Dodatki za Weiler E30
WeilerE30
Klic
Leto izdelave: 2010, Stanje: skoraj kot novo (rabljeno), We offer the following accessories for the Weiler E30 lathe:
1x Faceplate Schunk 250mm, Price: €600
Spindle nose DIN 55027 size 5
2x Faceplate Röhm 260mm, Price per piece: €650
Spindle nose DIN 55027 size 5
1x Travelling steady, Price: €450
2x Driving flanges, Price per piece: €210
Spindle nose DIN 55027 size 5
Ncodpfx Aegabvnsbbsl
All parts are in very good condition.
Mali oglas
Ubstadt-Weiher
585 km
Center stružnica
WeilerCondor B CE Konform
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor B with Lead and Feed Screw, 3-Axis Digital Readout by K&C, NEW, CE Compliant!
Technical Specifications:
>> Machine No.: 2442, Year of manufacture: 1997
>> Centre height: 165 mm
>> Centre distance: 750 mm
>> Spindle speeds: from 22 to 2800 rpm
>> Spindle bore: 40 mm
>> Short taper spindle nose DIN 55027 size 5 with bayonet lock
>> Tailstock Morse taper 3 (MT 3)
>> Feeds from 0.015 to 0.46 mm/rev
>> Thread types: Metric, Imperial, Module, and Diametral Pitch
>> Metric thread pitches: from 0.18 to 28 mm
>> Weight approx. 1100 kg
>> Switchable spindle brake
>> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m
Equipment and Features:
>> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty with operating manual
Functions: mm/inch conversion, coordinate choice ABS/INC, value halving, reference mark, tool programming (200 tools), taper calculation, radius/diameter, one-touch zeroing, count direction switching
>> 1 piece new 3-jaw chuck 160 mm, 2 sets of jaws
>> 1 piece 4-jaw chuck 200 mm, 1 set of jaws
>> New collet chuck and new collets from 3 to 25 mm in 1 mm increments
Njdpjxcuazsfx Abbscl
>> Multifix size B quick-change tool post with 2 tool holders
>> Bed stop
>> Electronic spindle guard
>> Rear cover
>> Machine feet
Safety features: electronic spindle guard, 2 emergency stop buttons, change gear box with limit switch, spindle brake
About the machine:
Offered is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our premises.
Mali oglas
Haiger
715 km
Natančna stružnica
WeilerErgodor
Klic
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1992, Lathe WEILER
Precision Center Lathe in Ergonomic Design
The Weiler Ergodor is the first German lathe designed with an ergonomic concept. It provides a more humane workplace and helps prevent health issues. The key feature: the operator can use this lathe both standing and sitting.
Technical Data
Distance between centers: 470 mm
Turning length: 430 mm
Center height: 145 mm
Swing diameter over cross slide: 160 mm
Swing diameter over bed: 300 mm
Spindle head, short taper flange
Bayonet mount DIN 55022 Size 5 or Camlock mount D 1-ASA-4
Spindle bore: 36 mm
Ncodpjvgqu Hefx Abbel
DIN 55022 Size 5 spindle internal taper
Spindle speeds
Speeds: 30 – 3550 rpm S
Speeds: 15 – 3550 rpm Brake motor 3 kW Brake motor 1.5/3 kW
Cross slide travel: 150 mm
Top slide travel: 100 mm
Feeds and thread pitches on the gearbox selectable in 30 steps Section 2 1.5/3 kW 38
Gearbox reduction: 3 20
Longitudinal feeds: 150 mm via change gears, 100 mm via toothed belt
Face feeds = 1/2 longitudinal feed rates
Metric threads: 0.2 – 12 mm
Module threads: 0.1 – 4
Dimensions: 1450 x 640 x 1500 mm
Net weight: 1000 kg
Acceptance as per toolmaker's accuracy to DIN 8605 20
Built according to occupational safety regulations, official test no. A. EM 11 1545/80.
Dimensions (French: Encombrement): 1450 x 640 x 1500 mm
Mali oglas
Varsseveld
894 km
Center stružnica
WEILERCondor AC Stufenlos
Klic
Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 180 mm, izvrtina vretena: 40 mm, premer struženja: 330 mm, premer struženja nad ležiščem sani: 330 mm, višina središča: 165 mm, stružna dolžina: 750 mm, poteza s peresom: 110 mm, največja hitrost vrtenja: 2.800 obr/min, vrtljajska hitrost (min.): 22 obr/min, moč: 5,5 kW (7,48 KM), Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Weiler Condor AC infinitely variable lathe
Njdsruqzcspfx Abbscl
Mali oglas
Ubstadt-Weiher
582 km
Center stružnica
WEILERPraktikant 160 AC - Teilüberholt
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4397, Dear Sir or Madam,
For sale is a Weiler Praktikant 160 AC lathe, year of manufacture 1998, equipped with an original Weiler 3-axis digital readout. This newer "AC" version stands out due to its infinitely variable speed control, which further enhances operation on this already very user-friendly machine. The machine has undergone extensive partial refurbishment in our workshop, bringing it to excellent technical and optical condition. All guideways are in good order, the gearboxes run quietly, and the levers switch smoothly. You are welcome to inspect the machine and verify its condition in person at our premises.
Availability: on request
Machine No.: 4397
Year of manufacture: 1998
Centre height: 160 mm
Ncsdpfx Abeq H D U Eebel
Centre distance: 650 mm
Spindle bore: Ø 40 mm
Spindle speed: 20-3000 rpm, stepless
Tailstock taper: MT3
Quill stroke: 85 mm
Longitudinal slide feed range: 0.020 - 0.630 mm/rev
Cross slide feed range: 0.006 - 0.200 mm/rev
Thread types possible: Metric, Imperial, Module, Diametral Pitch
Metric thread pitches: 0.25 - 8 mm
Spindle brake: switchable
Total connected load: 7.5 kVA
Voltage: 400 V
Dimensions (LxHxW): approx. 1.58x0.9x1.5 m
Weight: approx. 720 kg
Additional equipment & accessories: 3-axis digital readout, coolant system, chuck guard, 3-jaw chuck, and further accessories upon request...
Our service promise to you:
- We are a certified master workshop in mechanical engineering
- All machines are thoroughly inspected
- All lubricants and any worn parts are replaced in advance
- On request, we can completely or partially overhaul the selected machine
- On request, we can repaint your chosen machine in your preferred colour
- On request, you can order additional accessories such as tools directly
- On request, we can also install additional accessories such as safety devices etc.
- We are happy to arrange shipping and/or on-site installation
Mali oglas
Ubstadt-Weiher
584 km
Center stružnica
WEILERCommodor B - Teilüberholt
Klic
Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3595, Dear Sir or Madam,
For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone a comprehensive partial overhaul in our workshop. Among other things, both the main spindle bearings and the leadscrew/feedshaft bearings have been completely renewed!
Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to inspect on-site.
Availability: on request
Machine No.: 3595
Year of manufacture: 2001
Center height: 180 mm
Center distance: 1000 mm
Spindle bore: Ø 56 mm
Max. spindle speed: 2000 rpm
Tailstock taper: MT4
Feed range: 0.026 - 0.888 mm/rev
Thread types: Metric, Imperial, Module, Diametral Pitch
Metric thread pitches: 0.35 - 12 mm
Spindle brake: switchable
Connected load: 4 kW
Dimensions (LxHxW): approx. 2.2 x 1.5 x 1 m
Weight: approx. 1.8 t
Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, pull-out chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various chuck jaws...
Our service promise to you:
- We are a certified master workshop specializing in mechanical engineering.
- All machines are thoroughly inspected.
- All lubricants and, if necessary, worn parts are replaced in advance.
- Upon request, we can carry out a complete or partial overhaul of the machine of your choice.
- Upon request, we can repaint the selected machine in your desired color.
- Upon request, you can order additional accessories such as tools directly.
Ncodpfx Aothd Shebbsl
- Upon request, we can also install further accessories such as safety equipment, etc.
- We are happy to arrange shipping and/or installation for you.
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Ubstadt-Weiher
584 km
Center stružnica
WEILERPraktikant 160B - Teilüberholt
Klic
Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 40 mm, višina središča: 160 mm, širina na sredini: 650 mm, poteza s peresom: 85 mm, skupna dolžina: 1.600 mm, skupna širina: 900 mm, skupna višina: 1.500 mm, Dear Sir or Madam,
For sale is a Weiler Praktikant 160B lathe equipped with a 3-axis digital readout. The machine has undergone extensive partial refurbishment in our workshop, ensuring it is in excellent technical and visual condition. All guides are in good condition, the gearboxes run smoothly and quietly, and the levers switch easily. You are welcome to inspect the machine onsite to assess its condition for yourself.
Availability: on request
Centre height: 160 mm
Centre distance: 650 mm
Spindle bore: Ø 40 mm
Tailstock taper: MT3
Quill travel: 85 mm
Longitudinal feed range: 0.020 – 0.630 mm/rev
Cross feed range: 0.006 – 0.200 mm/rev
Thread types: Metric, Imperial, Module, Diametral Pitch
Metric thread pitches: 0.25 – 8 mm
Spindle brake: switchable
Total connected load: 7.5 kVA
Voltage: 400 V
Dimensions: approx. 1.58 x 0.9 x 1.5 m (LxHxW)
Weight: approx. 720 kg
Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, chuck, further accessories available on request...
Our service promise to you:
Nodpfju H U S Hjx Abbjcl
- We are a certified master craftsman business specializing in mechanical engineering
- All machines are thoroughly inspected
- All lubricants and, where necessary, worn parts are replaced beforehand
- Upon request, we can completely or partially overhaul your chosen machine
- Upon request, we can repaint your selected machine in your preferred color
- Upon request, you can order additional accessories such as tools directly
- Upon request, we can install further accessories like safety devices
- We are happy to arrange shipping and/or installation for you
Mali oglas
Szigetszentmiklós
334 km
Center stružnica
WeilerPrimus VC precision lathe
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Weiler Primus VC precizni stružnica
Leto izdelave: 2011
Tehnične podrobnosti
Premer struženja: 250 mm
Dolžina struženja: 500 mm
Višina konic: 140 mm
Nedpfx Aow Ebdbebbscl
Premer nad sanmi postelje: 280 mm
Maks. premer nad prečnim suportom: 150 mm
Glavno vreteno:
Območje vrtljajev glavnega vretena: 30 – 4.000 min⁻¹
Moč: 4,0 kW
Število prestav: 1
Vpenjalna glava: velikost 5 / DIN 55027
Premer vretena v prednjem ležaju: 70 mm
Premer odprtine vretena: 40 mm
Uporabni premer prehoda palic: 40 mm
Nosilec orodja:
Sistem: MultiFix B
Presek držala rezila: 20 x 20 mm
Konjiček:
Hod pinole: 85 mm
Premer pinole: 40 mm
Stožec konjička: MK 3
Pomiki:
Število pomikov: 24
Vzdolžni pomik: 0,02 – 0,63 mm/obrat
Prečni pomik: 0,006 – 0,2 mm/obrat
Narezovanje navojev:
Metrski navoj: 0,25 – 8 mm
Colni navoj: 80–2 1/”
Pomiki osi:
X-pomik – prečni suport: 150 mm
Z-pomik prečnega suporta: 500 mm
Z-pomik zgornjega suporta: 110 mm
Skupna priključna moč: 15 kVA
Teža stroja: pribl. 800 kg
Dimenzije (DxŠxV): 1400 x 935 x 1550 mm
Oprema/možnosti:
- Dokumentacija
- Tridelna vpenjalna glava, premer 160 mm, z čeljustmi
- Štiridelna vpenjalna glava, premer 160 mm, z čeljustmi
- Vpenjalna glava za vpenjalne puše z vpenjalnimi pušami
- Konjiček
- MultiFix nosilec orodja z držali
- Podporni prislon (luneta)
- Menjalna kolesa
- Razno orodje
- Lista omara
- Rezervni deli
- ipd.
Stroj je pod napetostjo v našem skladišču.
Mali oglas
Friesenheim
593 km
Stružnica - ciklično krmiljena
WeilerC30 x 750
Klic
Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Weiler C30 x 750 Precision Lathe (2007)
Manufacturer: Weiler
Model: C30 x 750
Year of manufacture: 2007
Availability: Multiple machines available
Njdpfoxd Tiwsx Abbjcl
Condition: Very good, used, from training workshop, last serviced 09/2024
Centre distance: 750 mm
Swing over bed: 330 mm
Swing over cross slide: 160 mm
Cross slide travel: 180 mm
Bed width: 240 mm
Tool shank section: 20 x 20 mm
Spindle nose as per DIN 55027 Gr.5
Front bearing spindle diameter: 70 mm
Spindle bore: 40.5 mm
Main spindle taper: 5 mm
Drive power 60 %/100 % DC: 9/7 kW
Total speed range: 1 - 4,500 rpm
Longitudinal feed force: 6,000 N
Face feed force: 3,000 N
Feed range: 0.001 - 10 mm/rev
Rapid traverse longitudinal/cross: 6/3 m/min
Metric threads: 0.1 - 400 mm
Inch threads: 56 - 1/4 TPI
Module threads: 0.125 - 28 mm
DP threads: 224 - 1 Dp
Max. number of threads: 99
Quill diameter: 50 mm
Quill stroke: 130 mm
Quill taper: MT3
Length: 1,750 mm
Width: 1,350 mm
Height: 1,670 mm
Weight: 1,300 kg
Scope of delivery:
Rota S Plus 200-52 3-jaw chuck
Multifix quick-change toolpost
Machine lamp
Coolant unit
Machine feet
Original documentation
Weiler maintenance log 09/2024
Mali oglas
Ubstadt-Weiher
584 km
Center stružnica
WEILERPraktikant VC - Teilüberholt
Klic
Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, višina središča: 160 mm, širina na sredini: 650 mm, največja hitrost vrtenja: 4.000 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Dear Sir or Madam,
For sale is a Weiler Primus VC / Praktikant VC lathe. This model series is particularly distinguished by its Siemens control panel and fully stepless speed regulation. As the name suggests, the VC is capable of operating with a constant cutting speed. The machine undergoes a comprehensive partial overhaul in our workshop, ensuring it is in excellent technical and visual condition. All guides are in good condition, the gearboxes run smoothly, and the levers are easy to operate. You are welcome to visit us and see the condition of the machine for yourself.
Availability: on request
Centre height: 160mm
Centre distance: 650mm
Spindle bore: Ø 40mm
Tailstock taper: MT3
Quill travel: 85mm
Thread types: Metric, Imperial, Module, Diametral Pitch
Metric thread pitches: 0.25 - 8mm
Spindle brake: switchable
Voltage: 400V
Dimensions: approx. 1.60x1.00x1.50m (LxHxW)
Weight: approx. 750kg
Additional features and accessories: Siemens control panel, coolant system, chuck guard, leadscrew and feedshaft cover, 2x emergency stop, operating manual, CE declaration of conformity, and much more on request...
Our service promise to you:
- We are a certified master workshop specializing in mechanical engineering
- All machines are at least workshop tested
- All lubricants and any worn parts are replaced beforehand
- Upon request, we can completely or partially overhaul your chosen machine
- Upon request, we can repaint the machine in your preferred colour
Ncjdpswhx I Nefx Abbol
- Upon request, you can order additional accessories such as tools, etc. directly
- Upon request, we can also install additional accessories such as safety devices, etc.
- We are also happy to take care of shipping and/or on-site delivery
Olajšamo vam iskanje: "weiler e 50"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni Weiler E 50 (178)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec





































































































































































































































