Weiler E 50 nakup rabljenega (177)

Stanje: dober (rabljeno), Stružnica Leit & Zugspindel WEILER CONDOR - Originalni premaz - Višina konic 165 mm - Premer struženja nad posteljo 330 mm - Premer struženja nad suportom 170 mm - Razdalja med konicama 800 mm - Vrtljaji vretena 24 - 2800 obr/min - Avtomatski vzdolžni / prečni pomiki - Premer izvrtine vretena 38 mm - Konjiček MK 3 - Naprava za vpenjalne tule + 17x vpenjalnih tulcev - Trio-čeljustna glava - Multifix z vložki - Električna zaščita glave - Zadnja zaščita pred ostružki - Delovna svetilka - Razna dodatna oprema - Dokumentacija Lrodpfx Asx A D Ubebbjg Mere: D x Š x V 1,8 x 0,9 x 1,6 metra / Teža 800 kg Pridržujemo si pravico do napak ali pomot

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Specifications: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Centre distance: 430 mm Lsdpeu Aftgsfx Abbsrg >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse Taper 2 >> Feeds: 0.03 to 0.15 mm/rev >> Threads possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: length 1.2 m, height 1.3 m, depth 0.65 m Accessories and Equipment: >> 1 pcs. 160 mm 3-jaw chuck with 1 set of jaws >> 1 pcs. new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet system with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the Machine: Offered is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was used in a training workshop. This new generation of Weiler lathes is very operator-friendly and can achieve ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Specifications: - Year of manufacture: approx. 1985, Machine no. 1191 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose KK4 DIN 55027 - Tailstock taper: MK 2 - Feeds: 0.03 to 0.15 mm/rev - Thread cutting: Metric, Imperial, Module, and Diametral Pitch - Metric threads from 0.25 to 2.5 mm pitch - Weight approx. 360 kg - Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: - 1 pc. 3-jaw chuck 125 mm with 2 sets of jaws - Collet chuck with 18 collets - Multifix size A quick-change toolpost with 3 holders - Stop - Electronic spindle guard About the Machine: Lodjvtp Edopfx Abbjrg Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-quality surfaces. Take the opportunity to inspect the machine under power on-site and see its condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus GS Lead and Feed Screw Lathe with 3-Axis Digital Readout Easson ES8 From training workshop – In excellent condition! Technical Data: • Year of manufacture: approx. 1990, machine no. 3768 • Centre height: 120 mm • Centre distance: 430 mm • Spindle speed: 60 – 3000 rpm in 18 gear steps • Spindle bore: 23 mm • Camlock spindle nose, DIN 4 • Tailstock: Morse taper 2 • Feeds: 0.03 to 0.15 mm/rev • Thread cutting: Metric, Inch, Module, and Diametral Pitch • Metric thread pitches: 0.25 to 2.5 mm • Weight: approx. 360 kg • Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Lrsdpfx Aovkfhpebbjg Accessories and Equipment: • 3-axis digital readout by Easson ES8 • Collet chuck system from 1 to 20 mm, collets in 1 mm increments with chuck and draw tube • 1 three-jaw chuck with 2 sets of jaws • 1 four-jaw chuck with 2 sets of jaws • Multifix size A with 3 tool holders • Bed stop • Facing attachment About the machine: Offered is a Weiler Primus lead and feed screw lathe, year approx. 1990, in outstanding condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The bed ways are in excellent condition. Even at high spindle speeds, the Weiler runs quietly. The machine comes from a large company’s training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surface finishes comparable to grinding. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paintwork!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short-taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds: 0.03 - 0.15 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions (L x H x D): 1.2 m x 1.3 m x 0.65 m Accessories and Equipment: >> 1 piece 125 mm NEW 3-jaw chuck with 2 sets of jaws Lrsdovivmyepfx Abbeg >> Multifix size A with 2 tool holders >> New collet chuck with collets from 3 to 26 mm in 1 mm increments, new About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All carriages run smoothly and evenly. The bed guides are in very good condition. The Primus was installed in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows you to achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see its condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Weiler Primus VC Precision Centre Lathe 3-Axis Digital Readout K&C NEW with VC Drive, Infinitely Variable Speed and CE. Very Good Condition Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4000 rpm, infinitely variable >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 Size 5 with bayonet lock >> Tailstock: MT3 >> Feeds from 0.02 to 0.63 mm/rev >> Available threads: metric, imperial, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm Lsdsw Idllepfx Abborg >> Weight: approx. 800 kg >> Spindle brake can be engaged >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Equipment and Accessories: >> 3-axis digital readout K&C NEW >> Collet device with collets 3 to 26 mm, new, incremented by 1 mm, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> Electronic chip guard >> Machine feet >> Splash guard About the Machine: For sale is a Weiler Primus VC lead and feed screw lathe, year 2003, in very good original condition. An excellent lathe with VC drive and infinitely variable speed control of the main spindle. The digital readout and scales from K&C are new. This newer generation of Weiler lathes is user-friendly and allows for producing surface finishes comparable to grinding. The K&C digital readout further simplifies and improves accuracy of operation. You are welcome to inspect the machine powered up at our premises and convince yourself of its condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 – Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout by K&C Technical Data: Lsdjwrmuxjpfx Abberg >> Year of manufacture: 1987, Machine No. 87 835 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse Taper 3 >> Feeds from 0.015 to 0.46 mm/rev >> Threads: Metric, Imperial, Module, and Diametral-Pitch possible >> Metric thread pitches: 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Features: >> NEW 3-axis digital readout from K&C, 12 months manufacturer warranty with operating manual Features: Switching between mm/inch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter function, quick zeroing, counting direction reversal >> 1 x 160 mm 3-jaw chuck NEW, 2 sets of jaws >> 1 x 160 mm 4-jaw chuck, 1 set of jaws >> Collet chuck and NEW collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Coolant system >> Machine feet About the machine: Offered here is a used Weiler Condor 81 in very good condition. The machine is, of course, fully operational and has been completely dismantled and newly repainted. A very robust and powerful machine. The new K&C 3-axis digital readout makes operation even easier and more accurate. The machine has been electrically and mechanically tested in our facility. A complete oil change was carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with NEW 3-axis Digital Readout from K&C – FROM TRAINING WORKSHOP! Technical Data: >> Machine No. 91-1814, Year 1991 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, Size 5 with bayonet lock Lrsdpfjw Nw Dqjx Abbog >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Equipment and Features: >> New 3-axis digital readout by K&C with 12-month manufacturer's warranty and manual Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter conversion, quick zeroing, counting direction switch, >> 1 pc. NEW 3-jaw chuck 160 mm, 2 sets of jaws >> 1 pc. 4-jaw chuck 160 mm, 1 set of jaws >> NEW collet chuck and NEW collets from 2 to 24 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Fixed steady rest >> Machine feet For safety: electronic spindle guard, 2 emergency stop buttons, change gear housing with limit switch, spindle brake About this Machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new 3-axis digital readout by K&C makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our facility.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81, Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout by K&C Lodpewb Supofx Abborg Technical Data: >> Year of manufacture: 1983, Machine No. 83-067 >> Centre height: 165 mm >> Distance between centres: 750 mm >> Spindle speeds: from 22 to 2,800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, Size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake, selectable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Scope of Delivery and Accessories: >> NEW 3-axis digital readout by K&C, 12-month manufacturer’s warranty, complete with manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference marker, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switching >> 1 pcs 3-jaw chuck NEW 160 mm, 2 sets of jaws >> NEW collet chuck and NEW collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 3 holders >> Electronic spindle protection >> Rear guard >> Coolant system >> Machine feet About the Machine: For sale is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital readout from K&C makes work even easier and more precise. The machine has been both electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test the machine under power at our site.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Data: >> Year of manufacture: 1988 Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm Ledpfxexu Hlas Abborg >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock taper: MT3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting capability: Metric, Inch, Module and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Accessories: >> 3-axis Heidenhain digital readout >> 1 pc. new 3-jaw chuck with 2 sets of jaws >> Collet chuck system, collets from 3 to 30 mm, 40 pcs. collets, some duplicates >> Multifix size B with 3 tool holders >> Bed stop >> Machine mounts >> Drill chuck >> Live center For safety: >> Lead and feed screw cover >> 2 emergency stop buttons >> Spindle brake About the machine: For sale is a used Weiler Condor 81 lathe, year 1988, in very good condition. Of course, the machine is fully functional. The lead and feed screws are equipped with protective covers for safety. A very robust and powerful machine. The 3-axis Heidenhain digital readout makes operation even easier and more precise. The machine has been electrically and mechanically tested in our workshop. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine under power at our facility.

Stanje: dober (rabljeno), Leto izdelave: 1988, Weiler Lathe Type: Condor B 2-axis digital readout Centre height: 165 mm Centre distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 185 mm Spindle bore: 40 mm Connected load: 3 kW Spindle speed: 22-2800 rpm Tailstock taper: MT 3 Coolant pump (not connected) Work lamp automatic longitudinal and cross feed spindle brake Lrsdjvgmbvepfx Abbjg - foldable chuck guard - splash guard Weight approx. 1040 kg 3-jaw chuck Multifix B tool post Live centre

Leto izdelave: 1973, Stanje: zelo dobro (rabljeno), Turning length 125 mm Machine weight approx. 0.4 t O F F E R We can offer you, subject to prior sale and errors, from stock: W E I L E R Precision Machinist Lathe Model MDU Year of manufacture 1973 #13010 _____ Centre height 125 mm Max. turning Ø over cross slide 140 mm Max. swing Ø over bed 260 mm Between centres 500 mm Spindle bore 28 mm Range 1 – Speed range: 220–1,800 rpm Range 2 – Speed range: 110–3,600 rpm Spindle drive kW Total power kW - V - Hz Weight 500 kg Accessories / Special features Lrjdpfxjxpxqwe Abbjg • Equipped with a 3-jaw chuck from RÖHM, 110 mm Ø, mounted • Machine base with integrated tool storage and comprehensive accessory package, including collet sets Condition : Very good – ready for demonstration. Ideal for training workshops, maintenance, etc. Please click here for a video of the machine : MDU260/4 Delivery : ex-stock – as inspected Payment : strictly net on collection – after receipt of invoice

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor v dobrem delujočem stanju. Lredpfxox Ngpde Abbeg Specifikacije: Premer struženja nad posteljo: 380 mm Premer struženja nad prečnim suportom: 190 mm Razdalja med konicama: 1000 mm Premer skozi glavna vretena: 56 mm Hitrost vrtenja: 25-2000 vrt/min Moč motorja: 4 kW Stroj je opremljen z: 3-osnim digitalnim merilcem 3-čeljustno glavo z več kompleti čeljusti Hladilni sistem Multifix nosilec orodja s 4 nastavki Vpenjalna naprava s vpenjalnimi pušami Ležiščni omejevalnik

Stanje: dober (rabljeno), WEILER Praktikant 800 R / Vlečni in pogonski stružnica iz izobraževalne ustanove Lodpfexyqxnex Abbsrg - Premer struženja nad posteljo 300 mm - Premer struženja nad suportom 150 mm - Dolžina struženja 800 mm - Prehod vretena 42 mm - Območje obratov 40-2000 vrt/min - Avtomatski vzdolžni in čelni pomiki - Navoji / metrični / colski / - Pinola MK 3 - Pogonska moč 3 KW - Multifix z vložki - Hitro vpenjalna naprava za napenjalne vložke vklj. s setom vložkov - Zaščita vpenjala - Zadnja stena za ostružke z delovno lučjo - Nujno zaustavitev - Menjalna kolesa - Vrtljiva konica + vpenjalni vrtalni vložek - Omara za orodje - Dokumentacija Dimenzije: DxŠxV 1,8x0,8x1,6 metra / Teža 750 kg Napake in tipkarske napake pridržane

Stanje: zelo dobro (rabljeno), WEILER PRIMUS Tip MD-G - Višina konic: 125 mm - Razdalja med konicama: 400 mm - Območje vrtljajev: 40–3000 vrt/min - Premer vretena: 24 mm - Električna zaščita vpenjalne glave - Sistem Multifix z vložki - Reitstock z vrtalno pinolo - Vpenjalna glava s štirimi čeljustmi Lredpfexw H Dbex Abbeg - Delovna svetilka - Omejevalnik postelje - Dokumentacija Mere: D x Š x V: 1,3 x 0,8 x 1,6 m / Teža: 450 kg Možnost napak ali napačnih vnosov pridržana.

Stanje: zelo dobro (rabljeno), izvrtina vretena: 38 mm, premer struženja nad ležiščem sani: 340 mm, premer struženja nad zgornjim sanežem: 200 mm, stružna dolžina: 750 mm, skupna dolžina: 1.700 mm, skupna širina: 650 mm, skupna višina: 1.500 mm, največja hitrost vretena: 2.800 obr/min, hitrost vretena (min.): 12 obr/min, skupna masa: 800 kg, Equipped with: Lrjdpfx Ajwxq Icjbbeg – Tailstock – Multifix toolpost – RÖHM three-jaw chuck (Ø 160 mm)

Stanje: dober (rabljeno), izvrtina vretena: 28 mm, premer struženja nad ležiščem sani: 300 mm, premer struženja nad zgornjim sanežem: 200 mm, stružna dolžina: 500 mm, skupna dolžina: 1.400 mm, skupna širina: 700 mm, skupna višina: 1.600 mm, skupna masa: 800 kg, Equipped with: – Multifix toolpost – Four-jaw chuck (Ø 130 mm) Ledpfx Ajwxq Iisbborg – Digital readout by HEIDENHAIN

Stanje: dober (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 10279, premer struženja nad prečnim suportom: 200 mm, izvrtina vretena: 35 mm, premer struženja: 300 mm, višina središča: 150 mm, stružna dolžina: 750 mm, skupna dolžina: 1.860 mm, skupna širina: 700 mm, skupna višina: 1.800 mm, največja hitrost vretena: 2.800 obr/min, hitrost vretena (min.): 40 obr/min, skupna masa: 1.030 kg, - Operating voltage: 380 V - Connected load: 3 kW Lsdpfx Abev Irgteborg - Rated current: 25 A - Frequency: 50 Hz Features: - Tailstock - Multifix Type B tool post - Three-jaw chuck (diameter: 160 mm) - 2-axis digital readout by RSF

Leto izdelave: 1977, Stanje: rabljeno, Weiler Matador lathe, year of manufacture approx. 1977, three-jaw chuck, Multifix quick-change toolpost. The machine is in operational condition and can be demonstrated under power by prior arrangement. Lrodpfxjnkad So Abbeg

Stanje: kot nova (razstavni stroj), WEILER COMMODOR 180 GSD / Nova stroj – razstavni stroj – neuporabljen Lrsdpfsxviiqex Abbsg TAKOJ NA VOLJO IZ ZALOGE - Razstavni stroj / NOV – neuporabljen - CE znak - 3-osni digitalni prikazovalnik - Višina konice 180 mm - Premer vrtenja nad posteljo 380 mm - Premer vrtenja nad sani 215 mm - Razdalja med konicami 1000 mm - Premer skozi vreteno 56 mm - Hitrost / menjalnik 25 – 2000 vrt/min - Avtomatski vzdolžni / prečni pomiki - Navoj / metrični / colski / diametralni - Konjiček / konus puše MK 4 - Izvlek puše 150 mm - Hladilna naprava - Multifix z vložkom - Tročeljustna vpenjalna glava 200 mm - Delovna svetilka - Zadnja zaščita proti ostružkom - Dokumentacija Dimenzije: D x Š x V 2,6 x 1,6 x 1,7 metra / teža 2000 kg Pridržujemo si pravico do napak in sprememb.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Mlinček Provisur Weiler 878, model z 50 KM. Odlična naprava za proizvajalce burgerjev, klobas in hrane za hišne ljubljenčke. Mleti lahko sveže ali zamrznjeno meso v kosmičih. Podaljšan lijak. Lsdjx Av Ruspfx Abbsrg

Stanje: pripravljen za uporabo (rabljen), Stružnica Weiler Commodor z vodilno in vlečno vreteno naprodaj. Proizvajalec: Weiler Tip: Commodor Stanje: rabljeno, dobro, še vedno v proizvodnji Dobava vključuje: - Multifix B nosilec orodij - Trivočna glava Lodexladwspfx Abbsrg

Stanje: rabljeno, Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, Ležajna in vlečna vretena stružnica Proizvajalec: WEILER Tip: COMMODOR Leto izdelave: 1979 Tehnični podatki Znamka: Weiler Tip: Commodor Razdalja med konicama: 1000 mm Premer struženja nad ležiščem: 400 mm Premer vretena: 50 mm Območje vrtljajev: 63-2000 vrt/min Lsdpfx Asxt Ngqsbberg Pogonska moč: 4 kW Dimenzije: pribl. D 2,2 x Š 1,0 x V 1,7 m Teža: pribl. 1,5 t Oprema • 3-osni digitalni prikazovalnik • Vpenjalna glava za vrtanje • 3-čeljustna vpenjalna glava znamke Röhm D 200 mm • Multifix držalo • Dodatna 3-čeljustna vpenjalna glava, ki je na stroju, ni vključena v dobavo! Vse informacije brez garancije. Preizkus pod napetostjo je možen kadarkoli v naši razstavni dvorani.

Stanje: rabljeno, Leto izdelave: 1999, Turning diameter 150 mm Turning length 500 mm Total power requirement 4 kW Machine weight approx. 0.8 t O F F E R We can offer you the following ex-stock, subject to prior sale and errors: W E I L E R LZS - Universal Lathe with Digital Readout Model: PRIMUS VC Year of manufacture: 1999 Lodpfx Aovm Dv Dsbbjrg _____ Centre height 140 mm Max. turning diameter over cross slide 150 mm Max. swing over bed 280 mm Distance between centres 500 mm Spindle bore 40 mm Infinitely variable speed 30 - 4,000 rpm 24 longitudinal feeds 0.02 - 0.63 mm/rev 24 facing feeds (longitudinal feeds x 8) 0.006 - mm/rev Metric threads mm/pitch Inch threads 80 - 2 TPI Module threads module Spindle drive 1.5 kW Total drive 4 kW - 380 V - 50 Hz Weight 800 kg Accessories / Special Equipment • SIEMENS 3-axis digital readout with X-axis, Z-axis, and additional Z-axis (compound slide) • Multifix-A tool quick-change holder • Equipped with a WEILER 3-jaw chuck, 140 mm diameter, mounted • Machine base for tool storage with integrated control cabinet, coolant system • Operating manuals Condition : very good – ready for demonstration Ideal for training workshops Delivery : ex-stock – as inspected Payment : strictly net upon collection – after receipt of invoice We look forward to receiving your order. Further lathes of all sizes in stock – please feel free to enquire.

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant VC Precision Lathe Manufacturer: Weiler Model: Weiler Praktikant VC Precision Lathe Year of manufacture: 2008 Condition: Used, very good, serviced and inspected with factory test report Technical Specifications Lsdpfx Abexd Tknsberg Turning diameter: 250 mm Turning length: 650 mm Centre height: 160 mm Swing diameter over bed carriage: 320 mm Maximum swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Drive power – main spindle: 10 / 6.0 kW Number of gear stages: 1 Spindle nose: 5 / DIN 55027 Spindle bearing diameter (front): 70 mm Spindle bore: 40 mm Usable bar capacity: 40 mm Toolpost: System: MultiFix B Turning tool shank cross-section: 20 x 20 mm Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inch: 80-2 1/” Module: 0.25 – 4 mm Travel paths: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel range: 180° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirement: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC Precision Lathe – Machine lamp – Documentation – 3-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool set