Traub Tns nakup rabljenega (95)

Stanje: dober (rabljeno), Leto izdelave: 2013, BAR AUTOMATIC LATHE TRAUB A 25 2013 Turning length: 65 mm Total power requirement: 2 kW Pgodpfjwc Amxex Aafju Machine weight approx. 0.7 t Space requirement approx. 1200 x 700 x 1600 mm Thread length: 40 mm Maximum part length: 65 mm Spindle speeds: 1400-2800 rpm Bar feeder included!

Stanje: nepreverjeno (rabljeno), Traub TNL 12/7 Pgodpsvk Tl Nofx Aafou

Stanje: dober (rabljeno), Leto izdelave: 2000, Traub TNL12/7 CNC Automatic Lathe Spindle bore: 12.7 mm Turning length: 130 mm Main spindle: 4 kW; C-axis 0.001°; 12,000 rpm Turret 1 - axes X1 and Y1, 6 stations, driven tools 1.5 kW Turret 2 - axes X1 and Z2, 6 stations, driven tools 1.5 kW Podopuilvopfx Aafjgu Subspindle: 2.5 kW; C-axis 0.001°; 12,000 rpm Front tool post - axes Z3; Z4/X3, driven tools Rear tool post - axis X4, driven tools 1.5 kW FMB Minimag bar feeder The machine comes with a wide range of accessories and tool holders. The machine is connected and currently in continuous production. 1. TNL12/7 s/n: 248 y/m: 2000, 7 linear axes (X1, Z1, Y1, X2, Z2, X3, Z3 + 2x C-axis) + FMB Minimag + Knoll chip conveyor

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 37.000 h, Funkcionalnost: popolnoma funkcionalen, TRAUB TNX65 with Bar Loader and Accessories Year of manufacture: 2006 Operating hours: 37,000 h Control system: TX8i - Both tool turrets newly resealed - High-pressure pump replaced - Machine fully operational - Geometric accuracy within manufacturer’s tolerances Accessories: - 2x Hainbuch chucks - Various tool holders (see photos) - Breuer bar loader (1,200 mm) Pgsdpjwm Igfofx Aafeu - Number of spindles: 2 - Number of turrets: 2 MAIN SPINDLE - Spindle mount: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle mount: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: ±40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: ±40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 95 kW WEIGHT AND DIMENSIONS - Required floor space: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg

Stanje: dober (rabljeno), Maximum bar capacity: 36 mm Maximum spindle speed: 6,300 rpm Number of spindles: 2 Control system: Traub TX8i Tool carrier 1: Number of tools: 12 X-axis travel: 50 mm Z-axis travel: 50 mm Front tool carrier: Number of tools: 7 Spindle speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm Pgedpfxjtrvzxj Aafsu X-axis travel: 370 mm Z-axis travel: 250 mm Rear tool carrier: Number of tools: 5 Spindle speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis travel: 73 mm Bar feeder: FMB Turbo 5-42 Bar length: 3,200 mm Bar diameter: 5 - 42 mm Country of origin: Germany Machine dimensions (LxWxH): 3,400 x 1,300 x 1,700 mm Machine weight: 4,000 kg

Stanje: dober (rabljeno), Leto izdelave: 1996, CNC Turning Center TRAUB Type: TNC65 DG Year of manufacture: 1996 Control: TRAUB TX8F Includes extensive accessories. Pedpfxeu Eug Io Aafsgu

Stanje: rabljeno, Leto izdelave: 1983, Funkcionalnost: omejena funkcionalnost, premer struženja nad prečnim suportom: 160 mm, stružna dolžina: 800 mm, izvrtina vretena: 60 mm, potovalna razdalja osi X: 205 mm, pomik po osi Z: 810 mm, hitri pomik na osi Z: 10.000 m/min, največja hitrost vrtenja: 3.150 obr/min, skupna višina: 1.800 mm, skupna dolžina: 1.800 mm, skupna širina: 3.300 mm, premer nihanja nad prečnim premičnikom: 160 mm, premer struženja nad ležiščem sani: 360 mm, skupna masa: 3.100 kg, Technical details: TRAUB TND 360 (Year: 1983) Pgodpfxewm Dhxe Aafju Swing diameter over bed: 360 mm Swing diameter over cross slide: 160 mm Turning length: 800 mm Longitudinal travel (Z axis): 810 mm Cross travel (X axis): 205 mm Control: TX-8 Spindle bore: 60 mm Spindle speed: 63 - 3150 rpm / 2 steps Feed rate: 10,000 mm/min Turret head - number of stations: 8 Tailstock taper: SK30 DIN 2080 Tailstock quill travel: 105 mm Operating pressure: 40 bar Total power requirement: 38 kW Machine weight approx.: 3.1 tons Machine dimensions (L x W x H): approx. 1.8 x 3.3 x 1.8 m Hydraulic system dimensions: 580 x 400 x 750 mm Equipment: Lathe chuck Ø 200 mm (without jaws), hydraulic

Stanje: rabljeno, Grinding wheel dresser, cup wheel dresser, double bench grinder dresser, surface grinding machine dresser, cylindrical grinding machine dresser, dressing head, truing head for grinding machines - Quantity: 1x wheel dresser available - Price: per piece Pgjdpfx Ajd R Ikdeafju - Dimensions: 325/130/H135 mm - Weight: 7.3 kg

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 32.870 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6030578, premer struženja: 32 mm, največja hitrost vretena: 8.000 obr/min, Premer palice (maks.): 32 mm, We offer for sale a Traub TNL26K CNC automatic lathe. The machine is connected to power and can be inspected in operation by prior appointment. Year of manufacture: 2005 Spindle bore: 32 mm Main spindle: 6.7/10.7 kW; 8000 rpm Pgjdpfx Aaovldx Aefeu Counter spindle: 6.7/10.7 kW; 8000 rpm Upper turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24 kW Bar feeder: FMB Turbo 5-42/4200 mm Swarf conveyor: Knoll 240 S1/100 Coolant compact band filter: Resy The machine comes with a large number of stationary and driven tool holders – please see the attached photo for a complete list.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, automatic lathe Traub Pgjdpfx Aewcqv Ieafou

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1994, obratovalne ure: 8.000 h, Funkcionalnost: nepreverjeno, Machine in good condition Pjdpfx Aasv Im Sdefogu

Leto izdelave: 2005, Stanje: dober (rabljeno), 7 Driven Tool Holders suitable for CNC Lathe Manufacturer: TRAUB TNA 480 Tool Mount Size: VDI 40. Compatible with SAUTER tool turret with VDI 40 interface. 7 Horizontal units No. 3/4/5/6/7/8/9 for drilling and milling; price per unit: €550 Pjdohwnfkepfx Aafogu 2 Horizontal units No. 1 and No. 2 for thread tapping; price per unit: €600 1 NC drill chuck VDI 40, clamping range 1–13 mm; price: €100 1 NC drill chuck VDI 40, clamping range 2.5–16 mm; price: €150

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Pedpfx Ajwp D Nbjafegu Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: DIN 69880 40 x 63 Total power requirement: 95 kW Approx. machine weight: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m with CNC TRAUB TX 8i, bar feeder TRAUB Stamag DNH61 / 3000, main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers extraction system, coolant unit with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package

Stanje: rabljeno, Lever Gauge, Dial Indicator, Contact Probe, Precision Dial Gauge - Manufacturer: Traub, Precision Dial Gauge - Measuring range: 0–5 mm - Reading accuracy: 0.01 mm - Ref.: Hoffmann 43250 5/40 - Quantity: 4 dial indicators available - Price: per piece - Case dimensions: 105/60/H25 mm Pgjdpfx Aourn R Sjafju - Weight: 0.1 kg/unit

Stanje: rabljeno, Leto izdelave: 1988, Technical details: Pgsdou Rqabjpfx Aafsu Swing diameter over bed: 360 mm Swing diameter over cross slide: 160 mm Turning length: 800 mm Longitudinal travel (Z-axis): 810 mm Cross travel (X-axis): 205 mm Control system: TX-8 Spindle bore: 60 mm Spindle speed: 63 - 3150 rpm / 2-step Feed rate: 10,000 mm/min Tool turret - number of stations: 8 Operating hours: 8,834 h Tailstock taper: SK30 DIN 2080 Tailstock quill travel: 105 mm Operating pressure: 40 bar Total power requirement: 38 kW Machine weight approx.: 3.1 t Machine dimensions (LxWxH): approx. 1.8 x 3.3 x 1.8 m Hydraulic unit dimensions: 580 x 400 x 750 mm Equipment: Ø 200 mm hydraulic chuck (without jaws) Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system Control panel Accessories: Precision adjustment device for tool setting

Leto izdelave: 1978, Stanje: rabljeno, Article: Programmable automatic lathe Brand: Traub Pedpfx Asl Rmqtsafegu Model: TF60 / 140 Year of manufacture: 1978 Bar automatic lathe Please contact us for further information and photos via email (at) or

Stanje: zelo dobro (rabljeno), Traub TNL12 CNC Swiss Zmogljivost: 12 mm Obratovalne ure: 25.596 h Sistem za gašenje požara Kraft & Bauer Papirni filter: Kompaktni tračni filter Konfigurirano kot na sliki (več fotografij sledi) Pjdpfx Asw R E Adeafjgu V proizvodnji od leta 2009 (prvotno razstavni model) 12-ft podajalnik palic FMB Lovilec oljne megle Transporter za ostružke „Na voljo 2 stroja“

Stanje: rabljeno, Leto izdelave: 1990, Tehnične podrobnosti: Premer struženja: 445 mm Dolžina struženja: 2000 mm Skupna potrebna moč: 34 kW Teža stroja pribl.: 7,5 t Prostorske mere pribl.: 6 x 2,5 x 2,2 m Pgsdpfxew I R Ndj Aafju Premer struženja nad posteljnim vozičkom: 660 mm Premer vretena: 65 mm Hitrosti vretena: 16 - 3150 min⁻¹ Hitri pomik X-smer: 10 mm/min Hitri pomik Z-os: 15 m/min S CNC krmiljenjem TX 8 D C-os z gnanim orodjem Revolverska glava s 14 pozicijami Konjiček, luneta SMW SLK 520 N kot NC-os Transporter za odrezke in hladilni sistem

Stanje: rabljeno, Leto izdelave: 1993, Tehnične podrobnosti: x-pomik: 400 mm y-pomik: 300 mm z-pomik: 400 mm Vrtljaji vretena: 8000 vrt/min Krmiljenje: Fanuc OM Vpenjalna miza: 500x300 mm Število mest v magazinu: 16 kosov Pjdpou Idn Hefx Aafegu Vpenjalo orodja: SK40 Razdalja delovno vreteno/vpenjalna površina maks.: 50-450 mm Število palet: 2 kosa Skupna potrebna moč: 10 kW Teža stroja pribl.: 2,5 t Mere stroja pribl. D x Š x V: 2,4x1,8x2,5 m Transportne mere stroja: 2,45x1,8x2,5 m - Električna omarica - Hladilna naprava - Transporter za ostružke proizvajalca META (transportna višina 1500 mm; širina 200 mm) Funkcija menjave mize ni v delovanju.

Stanje: dober (rabljeno), Leto izdelave: 2007, Traub TNX 65/42 obdelovalno-sučilni center Leto izdelave: 2007 Serijska št.: 7060107 Vklop v obratovanje leta 2010 Krmilnik TX 8i-S (krmilnik na osnovi Mitsubishi/Traub s pogoni in motorji Mitsubishi) 15 CNC osi 4 X-Y-Z revolverji s po 10 postajami. Do 20 orodij na revolver Prehodna odprtina vretena in podvretena 65 mm (podvreteno ima spiranje s hladilno tekočino) Nožni pedal za vpenjanje/izpenjanje vpenjal vretena Servomotorni grabilnik gantry Hidravlični obračalni prijemalec z pnevmatskim prijemalom za obdelan kos in ostanek palice Transportni trak za odvod obdelancev RESY papirni pasovni filter hladilne tekočine Rezervoar za hladilno tekočino Knoll z BKW hladilno temperaturno regulacijo Visokotlačna črpalka za hladilno tekočino, 20 bar, in nizkotlačna črpalka, 8 bar Transportni trak za ostružke Knoll Revijski podajalnik palic FMB Turbo 5-55 (nov 2010) 2 enojna držala za stružna orodja 2 dvojna držala za stružna orodja 1 držalo za odrezovalno orodje 1 pogonsko dvojno radialno držalo za živa orodja tipa ER collet 1 pogonsko radialno držalo za živa orodja tipa ER collet 4 radialna pogonska držala za živa orodja tipa ER collet 1 radialno pogonsko držalo za rezkar tipa End Mill 1 kotno nastavljivo pogonsko držalo za živa orodja tipa ER collet 2 radialni pogonski držali za rezkar tipa Shell Mill 2 aksialni pogonski držali za rezkar tipa End Mill 6 aksialnih pogonskih držal za živa orodja tipa ER collet 43 dodatnih držal za orodja – ločen seznam (glejte prilogo) Pjdpfx Aasq Npqmsfsgu Glavno vpenjalo vretena: Hainbuch collet chuck Podvreteno: Rohm dvokrako vpenjalo 2 rezervna kompleta vretenastih vreten Z-osi in ležajnih paketov.