Traub A 25 nakup rabljenega (95)

Stanje: dober (rabljeno), Interna številka artikla: 25092 Isdpfxsxvazks Af Tjtb Poganjalo držalo orodja Nastavljiva kotna glava Index / Traub Št.: W 7045011A Zelo dobro ohranjeno stanje! Držalo je bilo uporabljeno na stroju Traub TNL18

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 13.116 h, Max. bar capacity mm 20 Max. Z-axis travel, sliding/fixed headstock mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Isdswuddvspfx Af Tetb Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Swivel angle B-axis degrees 105 Lower turret: Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Back working attachment: Tool stations qty. 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Tool holder diameter mm 25 Sub spindle: Max. spindle bore mm 20 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant unit (basic): Pump pressure bar 3 / 8 Tank capacity l 250 Delivery rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions: Length x width x height mm see installation plan * Weight kg 5,000 * Connected load kW 40 (47 kVA)

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Dear Sir or Madam, We offer you a TRAUB TNL 26 CNC Swiss-type automatic lathe, year of manufacture 2004. The machine is in well-maintained, fully functional condition. Important note: This model comes equipped with only one turret. While the TNL 26 was also built in versions with two turrets, this is explicitly the version with a single turret. Technical data (summary) Manufacturer: Traub Model: TNL 26 Year of manufacture: 2004 Control: Traub TX8i-S Turret: 1 unit, mounted at the bottom, 12 tool positions, driven (live tool drive) Bar capacity: 26 / 32 mm Max. main spindle speed: up to 8,000 rpm Drive power: approx. 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) Axes: X1 / Y1 / Z1, C-axis integrated in main spindle Chip conveyor: hinge belt type, discharge height approx. 950 mm Machine weight: approx. 4,000 – 4,200 kg Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Itodpfsxgg Rmox Af Tob Condition & Application The machine is immediately available and ready for operation; it is ideally suited for precise production of small and medium batch sizes in the automotive, medical, and precision engineering industries. Price & Terms Price: on request / negotiable Delivery: ex location, ex works Inspection: viewings can be arranged at any time by appointment. For further information or to arrange a viewing, please do not hesitate to contact me at any time. Best regards, Arnd Sauter GmbH Björn Sauter

Stanje: rabljeno, Leto izdelave: 2005, Krmiljenje Traub TX8i Teža stroja pribl. 4000 kg 6300 vrt/min Itsdpfx Asxzk Rmof Teb Dolžina palice: 3200 mm Premer palice: 5-42 mm

Leto izdelave: 1978, Stanje: rabljeno, Article: Programmable automatic lathe Brand: Traub Model: TF60 / 140 Itodpfxel Rmqte Af Tjb Year of manufacture: 1978 Bar automatic lathe Please contact us for further information and photos via email (at) or

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Traub TFT monitor zaslon TX8D TX8F TX8H nadomestni monitor nadomestni zaslon Itedpjx Adb Iofx Af Teb Tip: TFT (1) Kat. št.: 222549 (2) Kat. št.: 10892558 Stanje: nov Traub TFT monitor/zaslon TX8D, TX8F, TX8H z okvirjem in kablom, 1 na 1 zamenljiv, 12" Plug and Play rešitev Ni originalni Traub del – 100% testirano, kompatibilno Izdelano pri cnc-markt GmbH

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1989, V okviru stečajnega postopka ponujamo: 2 x CNC stružnica (1 x protivreteno (1 x spodnji revolver)), rabljena + podajalnik palic + dodatna oprema 1. CNC stružnica s protivretenom Proizvajalec: MIYANO Tip: BNC 34-S Leto izdelave: 1989 Krmiljenje: Fanuc 0-T - Podajalnik palic HYDROBAR - 2 x vpenjalna glava za napenjalne tule Ijdpfsx Ed A Dsx Af Tetb - 1 x trijelčna vpenjalna glava 2. CNC stružnica z 2 x revolverjem Proizvajalec: MIYANO Tip: JNC 45-T Leto izdelave: 1989 Krmiljenje: Fanuc 0-T Podajalnik palic HYDROBAR - 1 x vpenjalna glava za napenjalne tule - 1 x trijelčna vpenjalna glava 3. Dodatna oprema - Približno 65 x napenjalna tule - Približno 40 x komplet čeljusti - Različni nosilci orodij + orodja - Dokumentacija Stroji niso testirani, vendar so bili uporabljeni do konca. Prodaja iz lokacije, nakladanje možno za doplačilo.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1996, obratovalne ure: 46.282 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 18770, model krmilnika: TX 8F, premer vpenjanja: 65 mm, največja hitrost protivretena: 4.000 obr/min, premer obdelovanca (maks.): 56 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is November 20, 2025! Placing a bid constitutes an obligation to collect the machine on time between December 1, 2025 and December 5, 2025! TECHNICAL DETAILS Max. workpiece diameter: 56 mm Max. clamping diameter: 65 mm Max. counter spindle speed: 4,000 rpm Counter spindle power: 11 kW Counter spindle constant power range: 1:8 Counter spindle torque: 210 Nm Driven tool system Max. speed of driven tool: 4,000 rpm Itedpfx Afoxpgl Aj Teb Driven tool power at 100% duty cycle: 1.5 kW Driven tool power at 15% duty cycle: 4 kW Driven tool torque at 15% duty cycle: 12.4 Nm (4 Nm) Number of tool stations: 10 (14) Cylindrical tool holder: ∅ 30 x 55 mm (25 x 48 mm) Tool shank cross-section: 20 x 20 mm (16 x 16 mm) Chip-to-chip time: 1.2 s Indexing time per station: 0.6 s Indexing time over 5 stations: 1.5 s X/Z input and output resolution: 0.001 mm C-axis input and output resolution: 0.001° Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Max. speed (C-axis): 80 rpm Torque (main spindle C-axis) at 100% duty cycle: 100 Nm Accuracy (main and counter spindle C-axis): ± 3 minutes Rapid traverse and path speed: 30,000 mm/min Rapid traverse: max. 15 m/min Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw drive (∅ x pitch): 32 x 10 mm Feed override: 0 – 200% Rapid traverse override: 0 – 100% Speed override: 50 – 120% MACHINE DETAILS CNC Control: TX 8F Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Rated power current: 85 A Connection: 54 kW Power consumption: 39 kW Noise emission at operator position: 71 dB(A) Temperature range: 5 – 40 °C Max. humidity: 70% Hydraulic system pressure: 60 bar Hydraulic tank capacity: 150 l Coolant pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Input Speed input: 5 digits Cutting speed input: 4 digits Tool input: 4 digits Program number: 8 digits Subprogram number: 8 digits Block number: 4 digits M commands: 3 digits B commands: 6 digits Memory capacity: 32,000 characters Operating hours: 46,282 h (as of 17.10.2025) EQUIPMENT Two 10-position tool turrets with powered tool stations HAINBUCH chuck system Counter spindle Bar loader from STAMAG Chip conveyor

Stanje: dober (rabljeno), Leto izdelave: 2001, TNK 36 letnik 2001 vključuje transporter ostružkov, filtrirni sistem Resy Itodexv Sr Ispfx Af Tsb v dobrem stanju, obratoval brez polnilnika, ni priključen na elektriko

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Traub TNL 18-7B CNC Automatic Lathe Base Machine: 2441 x 1396 mm Weight: 3800 kg Spindle Height Above Floor: 3800 mm Connected Load: 24 kW Main Spindle Max. Bar Capacity: 18 mm Max. Speed: 12,000 rpm Corner Speed: 5,000 rpm Z-axis Stroke: 205 mm Rapid Traverse: 40 m/min Measuring System Resolution Z: 0.001 mm Feed Force: 3000 N Spindle Nose / Short Taper: Traub short taper interface Max. Clamping Force: 1400 daN Max. Clamping Pressure: 40 bar Min. Clamping Pressure: 7.5 bar Piston Area: 40 cm² Total Cylinder Stroke: 5 mm Draw Tube Thread: M25 x 1 Counter Spindle Workpiece Diameter: 21 mm Clamping Depth Workpiece: 180 mm Max. Speed: 12,000 rpm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. Clamping Pressure: 30 bar Min. Clamping Pressure: 10 bar Upper Tool Turret with B-axis Number of Stations: 8 Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower Tool Turret Number of Stations: 7 + counter spindle Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Driven Tools for Upper Tool Turret Number of Driven Stations: Max. 8 Drive Power: 2 kW Max. Speed: 12,000 rpm Torque: 3.9 Nm Driven Tools for Lower Tool Turret Number of Driven Stations: 7 + counter spindle Drive Power: 3.4 kW Max. Speed: 12,000 rpm Torque: 7.3 Nm Driven Tools for Rear Unit Number of Stations: 7 Itodpfx Aswg Takof Tjb Number of Drivable Stations: Max. 3 Station Pitch: 46 mm Drive Power: 2 kW Max. Speed: 7,500 rpm Torque: 4.7 Nm Drive Power: 2 kW Max. Speed: 4,000 rpm Torque: 11.8 Nm SCOPE OF SUPPLY Includes (not exhaustive): Traub CNC Lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire suppression system Chip conveyor Bar loader Operating documentation Exact scope of supply as per photo documentation No guarantee is given for the correctness, completeness or timeliness of the information provided.

Stanje: dober (rabljeno), Leto izdelave: 2002, TRAUB TNL 12/7 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Spindle speed, main spindle: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF SUPPLY Includes (not an exhaustive list): - Traub TNL 12/7 CNC lathe - Meyrat high-frequency spindles, 2 units - Tool holders (driven and static) - FMB Minimag 3200 C bar feeder - Hydraulic unit - High-pressure pump - Chip conveyor Itsdjt E Dbyepfx Af Tob Exact scope of supply as per photo documentation. No guarantee is given for the correctness, completeness, or timeliness of the information provided.

Stanje: rabljeno, Leto izdelave: 2005, Swing diameter: 275 mm Turning length: 900 mm Control: TRAUB TX8i Spindle bore: 65 mm Drive power 100% duty cycle: 25.20 kW Drive power 40% duty cycle: 30.20 kW Torque at 40% / 100% duty cycle: 180 / 135 Nm Spindle speeds - stepless: 1 - 5,000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Tool carrier No. 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 600/950 mm B-axis: 360° Rapid traverse X/Y/Z: 18 / 18 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8,000 / 2,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 4x18.6 / 4x74 Nm Tool holder: TRAUB Ø60 Tool carrier No.2 / No.3 / No.4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse X/Y/Z: 18 / 15 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Tool turret - number of stations: 10 Number of driven tools: 10 mm Tool speeds: 1 - 6,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 18.60 Nm Tool holder: DIN 69880 Ø40x63 Bar loading magazine: DNH61 / 3000 Bar lengths: 1,000 - 3,200 mm Bar diameter: 18 - 63 mm Hexagon max.: 45 mm Total connected load: 95.00 kW Machine weight approx.: 16.00 t Space requirement approx.: 10.00 x 3.50 x H3.00 m Itodpfsw E Nnbex Af Tsb With TRAUB TX8i control, main and counter spindle with C-axis, 3 pcs. turret tool carriers, 1 pc. vertical tool carrier with B-axis, extraction system, chip conveyor, coolant unit with coalescence separator. Bar loader: TRAUB Stamag DNH61 / 3000 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package Machine can be inspected under power.

Leto izdelave: 1989, Stanje: pripravljen za uporabo (rabljen), Prehod vretena: 42mm, maks. premer obdelovanca: 115mm, število vrtljajev: 3150 min⁻¹, moč: 9kW, dolžina palice: 5200mm. Dimenzije stroja X/Y: pribl. 2100mm/1000mm, teža: pribl. 1500kg. Vključno s podajalnikom palic Stamag D 5000 in različnim priborom, kot so vpenjalne in podajalne čeljusti. Dokumentacija je na voljo. Možen ogled na lokaciji. Iedpjxwn Ihofx Af Totb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 8.000 obr/min, prehod palice: 32 mm, model krmilnika: Traub TX8i-S, število mest v zalogovniku orodij: 12, Oprema: transportni trak za ostružke, TEHNIČNI PODATKI Premer prehoda palice: 26 / 32 mm Maks. hitrost glavnega vretena: 8.000 obr/min Osi: X1 / Y1 / Z1, C-os integrirana v glavno vreteno Ijdpfx Afjxlfk No Tstb Revolver: 1 Število orodij: 12 Pogonska moč: 6,7 kW (100 % ED) / 10,7 kW (40 % ED) Navor: 21 Nm (100 % ED) / 32 Nm (40 % ED) PODROBNOSTI O STROJU Čas vklopa: 116.721 h Obratovalne ure: cca 48.000 h Krmiljenje: Traub TX8i-S Dimenzije & teža Dimenzije (D × Š × V): cca 4,4 × 1,4 × 1,7 m Teža stroja: cca 4.000 - 4.200 kg OPREMA Transporter za ostružke: lamelni trak, višina izmeta cca 950 mm

Stanje: rabljeno, Leto izdelave: 2003, maks. premer palice 65 mm maks. dolžina palice 3.000 mm krmiljenje sistem TX 8H CNC stružnica | TRAUB - TNC 65 z vgrajenim podajalnikom palic. Stroj je v dobro vzdrževanem stanju in ga je mogoče kadar koli ogledati pod napetostjo. Videoposnetke stroja na lokaciji tovarne z veseljem posredujemo na zahtevo. Tehnični podatki stroja bodo sledili v kratkem. Zahvaljujemo se vam za razumevanje! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65 Isdpexbtp Eefx Af Tstb

Stanje: rabljeno, Leto izdelave: 1994, Funkcionalnost: omejena funkcionalnost, izvrtina vretena: 42 mm, največja hitrost vretena: 4.000 obr/min, moč vretenovega motorja: 7.500 W, Stroj je v stalni uporabi in proizvaja hidravlične priključke iz šestkotnika 22 (avtomatno jeklo). Zelo tog in učinkovit stroj za enostavne komponente. Stroj ima tangencialni navojni nastavek FETTE. Na voljo sta 2 taka stroja, eden izmed njih je opremljen s stranskim vrtalnim nastavkom ter nastavkom za rezkanje navojev z veliko garnituro rezkarjev. Oba stroja imata velik komplet držal in puš. Cena za oba stroja je predmet dogovora. Itedpfx Aexq Rz Def Tjb

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Spindle hours: 26,709 [h] Ijdpfxeuhawhe Af Tetb COUNTER SPINDLE - Max. bar diameter: 13 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Spindle hours: 16,854 [h] - Number of turrets: 2 UPPER TURRET - Number of positions: 6 - Number of powered positions: 6 - X travel: 35 [mm] - Z stroke: 50 [mm] - Driven tool speed: 8,000 [rpm] LOWER TURRET - Number of positions: 6 - Number of powered positions: 6 - X travel: 35 [mm] * Y travel: -9.5 / +28 [mm] - Driven tool speed: 8,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 16 [kVA] WEIGHT AND DIMENSIONS - Footprint: 2,850 x 1,100 [mm] - Machine height: 1,480 [mm] - Machine weight: 2,000 [kg] EQUIPMENT - Control: Traub TX 8i - Driven guide bushing - Parts removal device - Parts conveyor belt - Chip conveyor: KNOLL 160 S-1 - Coolant tank: 500 [l] * with paper filter - Bar loader: FMB Minimag 18 / 3200 C - Oil mist extractor: UAS SMOG HOG SH-05 - Number of fixed tool holders: 5

Stanje: rabljeno, Leto izdelave: 1990, Turning diameter 250 mm Turning length 450 mm Control system TX8D Spindle bore 80 mm Spindle speed: 3,150 rpm CNC bar turning machine with 3 turrets Itedpfxst Hwq Dj Af Tob Extra-large spindle bore, with bar feeder

Stanje: zelo dobro (rabljeno), CNC machine Traub TNL 26 Condition: used, well maintained Itedpfxjhlp Sde Af Tob Sale without any warranty

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Traub CNC Turning Machine TNC65DGY, TX8I, year 2005, serial no. 1130 Description: Y-axis on S1, V-axis, 2x C-axis, 2x driven tool stations, 2 turrets VDI30, Hainbuch BZI65 clamping system on main and counter spindle, parts catcher, Iemca Master 880MP-E bar feeder. Condition: Very well maintained, good condition, serviced. Machine geometry checked and corrected/adjusted. The machine can be inspected under power – or video available. Warranty: 6 months on main components as follows: Spindle bearings, ball screws, linear guides, clamping cylinders. The warranty expressly covers only the spare parts, not downtime hours, labor time, or travel time. The warranty expressly does not cover parts other than those listed above, e.g. wear parts, electrical components, electronics, hydraulics, etc. Iodpfxowi I Eys Af Tetb

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Traub CNC Lathe TNC65DGY, TX8H, Year 2001 • 2x 10-position turrets with live tooling drive VDI30 • C-axis on main and sub spindle • Y-axis on turret 1 • Hainbuch BZI65 on main/sub spindle Hollow clamping cylinder • Chip conveyor, coolant tank • Spare parts catalogue, circuit diagram, ATC optics Very good condition. Iedpfx Aewi Izhsf Tstb Machine can be inspected under power. Machine geometry has been checked and corrected/set.

Stanje: rabljeno, Leto izdelave: 2011, obratovalne ure: 51.400 h, Funkcionalnost: popolnoma funkcionalen, Traub CNC Lathe TNX65, TX8i-s, Year 2011 Model: TNX 65 Year of manufacture: 2011 Control: TX 8i-s Main / sub spindle bar capacity up to 65 mm, 3 turrets, 3 x Y-axis, driven tools, 2 x C-axis, sub spindle, chip conveyor, belt filter, coolant system, parts conveyor, New hydraulic pump Extensive accessories: approx. 4 driven tool holders, 15 fixed tool holders Short bar loader Breuning Approx. 114,586 operating hours Approx. 51,400 production hours Good condition Under power, available for inspection Ijdpjwxc Hkofx Af Tetb Delivery time approx. 2 weeks, by arrangement

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, obratovalne ure: 15.001 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 462, model krmilnika: Traub TX8F, število osi: 7, Oprema: podajalnik palic, transportni trak za ostružke, CNC lathe with 7 axes, bar feeder & additional equipment! Itjdpew Uiqyjfx Af Tsb TECHNICAL DETAILS Bar length: 3000 mm Number of axes: 7 Control unit: Traub TX8F MACHINE DETAILS Operating hours spindle 1: 50,318 h Operating hours spindle 2: 32,922 h EQUIPMENT Main spindle Sub spindle 2 turrets 2x C-axis 1x Y-axis Bar feeder: IEMCA CNC BOSS 542 Enclosure Coolant system Chip conveyor

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, obratovalne ure: 38.433 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 489, Premer palice (maks.): 65 mm, model krmilnika: TRAUB TX8F, dolžina letve: 3.000 mm, število osi: 7, Oprema: podajalnik palic, transportni trak za ostružke, CNC avtomatski stružni stroj s sedmimi osmi ter glavno in proti-vreteno! Itjdpow Uiktofx Af Tjb TEHNIČNI PODATKI Osi in vretena Število osi: 7 Glavno vreteno: prisotno Proti-vreteno: prisotno Število revolverskih glav: 2 C-os: 2 Y-os: 1 Krmiljenje: TRAUB TX8F PODATKI O STROJU Delovne ure: 38.433 ur OPREMA Polnilnik palic Stamag DN61 (premer palice 65 mm, dolžina palice 3 m) Hladilni sistem Izmet delov Transportni trak za odrezke Zračni filter

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 42 mm, stružna dolžina: 206 mm, TECHNICAL DETAILS Spindle power: 5.5 - 9 kW Max. workpiece length: 206 mm Spindle bore: 42 mm Tool post: 4 slots Ijdpowtq Ufefx Af Tjtb MACHINE DETAILS Length (L - R): 2,500 mm Width (F - B): 900 mm Height: 1,700 mm